Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong hose suction-delivery intended for conveying liquid chemicals, in this aggressive acids, bases, alcohols and other detergents used for cleaning installations in plants food (selection in accordance with rules acc. to chapter „hoses chemical” this catalogue). Layer inner with UPE compliant with requirements FDA for contact with food. Widely used in industry food, cosmetic, chemical and petrochemical. has copper cable ensuring continuity electrical between fitting hose. Layer outer resistant to abrasion, ozone and conditions atmospheric. compliant with requirements EN 12115:11 (type M, resistance between fitting the line R ≤ 100 Ω, guaranteed for lines o length for 40 m). standards and requirements : 1) hoses chemical EN 12115:2011. industry food, contact with food (Layer inner) 1935/2004/EC, 2023/2006/EC (GMP), 10/2011/EU (simulant fluids A, B, D2), FDA 21 CFR 177.1520, BfR III. assembly : smooth ends with a spigot ("tail" into the hose) must be used, without sharp or high barbs that could cut or damage the UPE inner layer after clamping. The spigot diameter should be precisely matched to the hose diameter to ensure tightness. Assembly with clamping ferrules or shell clamps. Inner layer: white polyethylene UPE. Reinforcement: cord synthetic, steel spiral. Outer layer: blue EPDM rubber. Working pressure: 16 bar. Vacuum: 0.8 ÷ 0.9 bar - depending on the diameter hose. Operating temperature: -30°C up to +100°C.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose delivery specially designed for transport water cooling, used at furnaces metallurgical, systems cooling transformers and transducers electric. used in metallurgy steel. Layer outer coated fiber glass resistant to action radiation heat up to +550°C (momentarily) and splashes hot materials. Layer inner insulating (dielectric), R>10 11 Ω, durable on breakdown electrical E≥6000 V/mm, o increased resistance to penetration water and steam at extreme parameters use. minimal radius bends in data technical stated is for pressure above 3 bar. Inner layer: light blue, insulating EPDM rubber. Reinforcement: cord synthetic. Outer layer: EPDM rubber coated fiber glass. Working pressure: 20 bar. Operating temperature: od -35°C up to +120°C, outer up to +550°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose made in accordance with technology improvement platinum o exceptional purity, intended for applications biotechnological. resistant to action high temperatures, ozone, radiation radiation, moisture, action conditions atmospheric. Not adsorbs and not absorbs odour ani taste. can be repeatedly sterilised in autoclave a also oxide ethylene or by radiation. Meets FDA requirements, USP kl. VI, ISO 10993, European Pharmacopoeia 3.1.9 and Japanese Pharmacopoeia - section 51. Safety factor 5:1. Material: transparent silicone. Hardness: 50° Shore (A). Density: 1.17 g/cm³. Operating temperature: od -65°C up to +260°C. length hose: 7.62 m, 15.24 m or 30.48 m.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose SUPER FLEX reinforced polyester and a spiral steel intended is for systems cooling and systems heating in vehicles (water, liquids cooling, air clean or with small amount mist oil). For oils, fuels and oil mist, a version made of fluorine rubber (fluorocarbon) is recommended. length standard: 1000 mm. Pressure safety factor: 3:1. The hose meets the SAE J20R1 standards. Hardness (standard version) approx. 65° Shore (A), density approx. 1.26 g/cm³. color layer outer: blue. Material: rubber silicone. Reinforcement: polyester plies + A spiral steel (wall thickness wire 1.2 mm). pressure working: od 2 bar for 8.12 bar (depending on diameter hose). Operating temperature: from -50°C to +180°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsColorless, glassy transparent, flexible hose free of smell and taste, non-toxic, nie containing phthalates and BPA (bisphenol A). intended for conveying and dispensing products food, in particular products milk, spices, concentrates vitamin, aromas itp. smooth, non-porous surface inner hose eliminates problem settling particles product and growth bacteria. resistant na action alkaline agents cleaning. can be used for pumps peristaltic (service life moderate). meets requirements hygienic and for contact with food: European 1935/2004/EC and 10/2011 EU (for conditions and substances acc. to certificate), American FDA, NSF-51, NSF-61, 3-A, Japanese #370/1959 and MHLW370(3-D). possible sterilization steam or oxide ethylene. compliant with REACH and California Proposition 65 – nie contains substances hazardous and banned. Length of a full hose roll 15 m (od diameter internal 50.8 mm - 6 m). pressure working determined relative to pressure bursting at factor safety 1:5. Material: PVC (special). Maximum operating temperature: +74°C. temperature brittleness: -36°C. Hardness: 66° Shore (A). Density: 1.21 g/cm 3. Note: The product is packaged in the Tubes International Clean Zone (CLEAN ROOM) in compliance with rigorous standards. Return of the product after opening the package is not possible.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong hose delivery with layer inner with resistant chemical polyethylene o ultra-high weight molecular (UPE, UHMWPE). The inner layer is resistant to most acids and bases and many other aggressive chemicals (in elevated, ale nie very high temperatures), co makes, that hose is wide used in industry chemical and petrochemical. Layer inner with UPE is also compliant with requirements for hoses food, free of phthalates and polycyclic carbon aromatic (PAH), is characterized also low a coefficient friction during flow and prevents deposition medium na walls. This significantly facilitates cleaning and allows use also in the cosmetic, pharmaceutical and food industry. Reinforcement cord synthetic, built-in cable copper for discharge charges electrostatic. Layer outer with resistant chemical rubber EPDM, resistant na abrasion, ozone and conditions atmospheric. compliant with requirements EN 12115:2011 (type M, resistance between fitting the line R ≤ 100 Ω, guaranteed for lines o length for 40 m). standards and requirements: hoses chemical: EN 12115:2011. industry food, contact with food (Layer inner): 1935/2004/EC, 2023/2006/EC (GMP ), 10/2011/EU (simulant fluids A, B, D2), FDA 21 CFR 177.1520, BfR III. Confirmation of resistance and application conditions requires contact with Tubes International, in particular for temperatures above 50°C. Inner layer: white cream polyethylene UPE. Reinforcement: synthetic cord. Outer layer: black rubber EPDM. pressure working: 16 bar. temperature use: from -40°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight and very flexible even in low temperature hose suction-delivery, intended for applications general-industrial (in industry, construction, agriculture). It can be used for water, light chemicals, sludge and sewage, agents protection plants, other liquids (without fat, oils and hydrocarbons) as well as for air, vacuum conveying dusts, powders, granulates and other lightly abrasive substances bulk (non-greasy). In that case the abrasiveness and the possible problem of static electricity must be taken into account. Reinforcement with a rigid-PVC spiral, impact-resistant, provides good resistance to vacuum and kinking of the hose. A smooth inner surface reduces flow losses and ensures ease of cleaning. The outer surface is lightly corrugated, smooth for small diameters. As a hose reinforced only with a rigid-PVC spiral, without a braid, it shows a certain elongation under pressure, which must be taken into account in use, especially at elevated temperatures. Hose material: green transparent PVC. Reinforcement: rigid-PVC spiral. Working pressure at a temperature of 20°C: from 2 bar to 6.5 bar - depending on the diameter hose. As the working temperature rises, the hose's working pressure value decreases. Operating temperature: from -25°C to +55°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery strong, thick, flexible hose intended for extraction and conveying abrasive bulk materials, granulates, gravelling roofs, cleaning industrial, abrasive for sandblasting, silos, tankers for bulk materials etc. compliant with the standard DIN 26057 Type 4 (SMARTFLEX® 2.0). Antistatic and flame-retardant, it ensures a high level of work safety. thick wall and dense, thick spiral reinforcing ensures high resistance to vacuum. smooth inside, non-compressible, not very pliable, but flexible, also in low temperatures. With very good abrasion resistance, also resistant to microbes and hydrolysis. Contains no halogen compounds or plasticisers. Resistant to oils and petrol. The optimal flow direction of the medium is marked with an arrow. The hose wall thickness is measured between the spiral. Other diameters may be available on special order. Anti-electrostatic properties: permanently antistatic (in accordance with ISO 8031 resistance R 9 Ω, in accordance with the German technical regulations TRGS 727 (6.4.2.4) specific resistance R 8 Ωm, in accordance with directive 2014/34/EU (ATEX) it can be used in specified explosion-hazard zones - which should be preceded by a risk analysis). After effective two-sided earthing of the spiral, it can be treated as electrically conductive – in accordance with BGI 739-2 recommendations. Flame-retardant – in accordance with DIN 4102 class B1. Wall thickness measured between the spiral: 2.0 mm (SMARTFLEX® 2.0), 2.5 mm (SMARTFLEX® 2.5). Hose material: transparent polyether-polyurethane. Reinforcement: spiral with wire steel. Operating temperature: od -40°C up to +100°C (momentarily up to +125°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsElbow silicone 180° reinforced polyester intended is for systems cooling and systems heating in vehicles (water, liquids cooling, air clean or with small amount mist oil). For oils, fuels and oil mist, a version with a fluorosilicone inner layer is recommended. Standard arm length: 102 mm. Pressure safety factor: 3:1. The hose meets the SAE J20R1 standards. Hardness (standard version) approx. 65° Shore (A), density approx. 1.26 g/cm³. color layer outer: blue. Material: rubber silicone. Reinforcement: polyester plies. pressure working: od 2 bar for 8.12 bar (depending on diameter hose). Operating temperature: from -50°C to +180°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsColorless, crystalline transparent, flexible hose chemical o multilayer the structure with inner layer with fluoropolymer FEP o unique resistance and inert chemical. Characterized significantly greater flexibility than rigid hoses made completely with PTFE or other fluoropolymers. smooth Layer inner, resistant and inert chemical eliminates risk contaminants liquid. resistant na wide range substances chemical od substances corrosive for solvents na base MEK. hose meets requirements hygienic and for contact with food: American FDA 21 CFR 177.1550, nie contains phthalates ani BPA (bisphenol A), is non-toxic, nie leaves smell ani taste. sterilization oxide ethylene. used in various use industrial: flow chemicals, substances pharmaceutical, beverages food, production and packaging paints, solvents and adhesives, for inks and toners, for chemicals photographic, fertilizers and pesticides, in production semiconductors. Length of a full hose roll 15 m. pressure working determined relative to pressure bursting at factor safety 1:5. Material: FEP / PVC special. Maximum operating temperature: +74°C. temperature brittleness: -36°C. Hardness: 66° Shore (A). Density: 1.21 g/cm 3. Note: The product is packaged in the Tubes International Clean Zone (CLEAN ROOM) in compliance with rigorous standards. Return of the product after opening the package is not possible.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery light and flexible hose delivery flat-folding of couplings for water for pumps fire-protection. used is for motor pumps firefighting, rescue and services forest. besides function fire-protection Widely used for conveying water in industry, construction, agriculture and mining. Layer inner smooth, resistant to mould and rotting. Layer outer (braid) o high strength, with coating polyurethane, not taking dirt, increasing resistance to abrasion and contact with flame. certificates: hoses compliant with conditions technical regulation MSWiA with 27.04.2010 r.., hoses of couplings (A complete lines) have certificate approvals CNBOP-PIB. Inner layer: smooth polyurethane. Reinforcement: a polyester braid. Outer layer: red coating polyurethane. Working pressure: from 12 bar to 15 bar - depending on the diameter hose. Operating temperature: od -30°C up to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSilicone hose delivery REDSIL, has versatile use in wide the scope temperatures. uses go both for hot air, as and e.g. in systems cooling. intended for liquids and gases, used in many branches industry between other chemical. Inner layer: transparent silicone. Reinforcement: olpot PET (polyester). Outer layer: red silicone. Hardness: 70° ±5° Shore (A). Operating temperature: od -50°C up to +200°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible hose suction-delivery intended for conveying food, pharmaceutical and cosmetic substances: water, fruit juices, beer, wine, vinegar, alcohols with a concentration up to 96%, milk and dairy products, creams, soaps, aromatic substances, pigments and others. Resistant to fats and oils within the standard range of use. Good chemical resistance to light chemicals – acid and base solutions. The extruded, completely smooth inner and outer surface of the hose facilitates flow and cleaning. Reinforcement spiral with stainless wire steel, embedded in wall with TPE-S, makes go resistant to vacuum and kinking. transparent wall allows on easy visual control of the flow. The hose material is not vulcanised, is clean (contains no vulcanising additives), resistant to hydrolysis, does not promote bacterial growth, with low porosity and low permeability. Completely neutral in taste and odour, does not change the organoleptic properties of the medium. resistant to aging, conditions atmospheric and radiation UV. Cleaning by the SIP method, which noticeably shortens the service life, is not recommended. Use for high-proof alcohol (its vapours or other flammable substances) requires taking into account the hazards associated with static electricity. as hose reinforced only spiral (without braid) is characterized a certain elongation under pressure, therefore maximum pressure working hose is low (factor safety 1:5). Cleaning, disinfection or sterilisation of the hose must be carried out strictly according to the recommendations given in the catalogue sheet below. standards and requirements : 1) industry food, contact with food: compliant with the European requirements 1935/2004/EC and 10/2011/EU (simulant fluids A, B, C, D1, D2), 2023/2006/EC (GMP) and American FDA 21 CFR 177.2600 „e”. 2) Pharmaceutical industry: USP CLASS VI. Hose material: transparent TPE-S. Reinforcement: spiral of steel AISI 302. Working pressure: from 1 bar to 1.5 bar, depending on the diameter hose. Operating temperature: -30°C up to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsElbow silicone 45° reinforced polyester intended is for systems cooling and systems heating in vehicles (water, liquids cooling, air clean or with small amount mist oil). For oils, fuels and oil mist, a version with a fluorosilicone inner layer is recommended. Arm length: 100 mm (also available with arms of length 152, 250 mm). Pressure safety factor: 3:1. The hose meets the SAE J20R1 standards. Hardness (standard version) approx. 65° Shore (A), density approx. 1.26 g/cm³. color layer outer: blue. Material: rubber silicone. Reinforcement: polyester plies. pressure working: od 1.5 bar for 8.33 bar (depending on diameter hose). Operating temperature: from -50°C to +180°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery strong, thick, flexible hose intended for extraction and conveying abrasive bulk materials: granulates, grain, sand, gravel. thick wall and very dense spiral reinforcing ensures high resistance to pressure and vacuum. very smooth inside, non-compressible, not very pliable (r=4xD), retains its flexibility also in low temperatures. hose o sound resistance to abrasion, resistant also on oils and gasoline. Assembly on connectors with bridge clamps (prawo-handed) or assembly special on ends industrial e.g. flange. Other diameters may be available on special order. versions: P3 S PU – version standard, with polyester – polyurethane, very resistant to abrasion and P3 S PU AE - version with polyether – polyurethane, o sound resistance to abrasion, resistant to microbes and hydrolysis; with approval for contact with substances food, compliant with requirements European 1935/2004/EC and 10/2011/EU (simulant E), 2023/2006/EC (GMP) and American FDA 21 CFR 177.2600 and 178.2010. is suitable for time contact with food at conveying dry, bulk, free of fat on surface, substances food - on conditions defined in declaration conformity the manufacturer (Available in Tubes International); P3 S PU AS – version antistatic (R ≤10 8 Ω), compliant with TRBS 2153 and for extraction also with TRGS 727, with polyether – polyurethane, o sound resistance to abrasion, resistant to microbes and hydrolysis. Hose material: transparent polyester-polyurethane (P3 S PU), transparent polyether-polyurethane (P3 S PU AE and P3 S PU AS). Wall thickness measured between the spiral: 2 mm. Reinforcement: dense spiral with wire steel. Operating temperature: od -40°C up to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSleeve mounting crimped for thick-walled hoses for freon, type 2051A. Material: aluminum.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsKnown and proven od lat, light and soft hose with rubber natural o light brown color. easy for installation thanks to its softness (hardness 40° Shore – A), flexible and flexibility (Maximum stretchability 500%). has close properties for latex. resistant na abrasion, o sound resistance na acids and bases. used for liquids and gases, for many applications industrial np. dispensing and dosing soaps and detergents, products alcoholic and milk, laboratories. Sterilization steam 30 min. (1 bar, 141°C) or oxide ethylene. length full roll hose 50 m (od diameter internal 7 mm - 25 m). The given working pressure is determined relative to the bursting pressure at a safety factor of 1:5. Material: rubber natural (NR). temperature use: from -35°C to +70°C (120°C for moist hot). temperature brittleness: -40°C. Hardness: 40° Shore (A). Density: 0.98 g/cm³. Note: The product is packaged in the Tubes International Clean Zone (CLEAN ROOM) in compliance with rigorous standards. Return of the product after opening the package is not possible.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose suction-delivery intended for conveying products pharmaceutical, cosmetic, substances food, chemical (selection in accordance with rules acc. to chapter "hoses chemical"). Contains no plasticisers, phthalates or substances of animal origin. is characterized high strength thermal and mechanical. is excellent solution for industries processing demanding highest safety during transfer products o high cleanliness. Layer outer resistant to abrasion, ozone and conditions atmospheric. has two copper cable ensuring continuity electrical between fitting hose. standards and requirements : 1) general EC 2002/95 (RoHS), EC 1907/2006 (REACH). 2) industry food, contact with food 1935/2004/EC and 2023/2006/EU (GMP). Layer inner compliant with 10/2011/EC, D.M. 21/03/73, FDA 21 CFR 177.1550. Layer outer compliant with FDA 21 CFR 177.2600, D.M. 21/03/73. 3) Pharmaceutical industry: USP CLASS VI (Layer inner). assembly : smooth ends with a spigot ("tail" into the hose) must be used, without sharp or high barbs that could cut or damage the MFA inner layer after clamping. The spigot diameter should be precisely matched to the hose diameter to ensure tightness. Assembly with clamping ferrules or shell clamps. Inner layer: smooth polymer fluorine MFA. Reinforcement: cord synthetic, steel spiral. Outer layer: smooth EPDM rubber. Working pressure: 10 bar. Vacuum: 0.9 bar. Operating temperature: -50°C up to +170°C (for greater chemicals).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose delivery intended for conveying compressed air, for compressors, hammers, drills and other tools pneumatic. thanks to low weight, flexibility, strong construction and high pressure working accepted and with success used od many lat in construction (in particular in companies occupying demolition), industry and mining. extremely strength and durable thanks to high quality materials and the structure. Reinforcement with circumferentially woven braid polyester completely bonded and surrounded rubber in original process production extrusion blend rubber on hot through braid. resistant to radiation UV. Layer inner smooth, co ensures minimal losses flow. yellow, grooved surface outer is resistant abrasion, oils and ozone and perfectly visible on square construction. flat at rest, co facilitates operation and storage. resistant to loads longitudinal. used most often of couplings claw for air (spacing 42 or 41 mm) mounted clamps cast iron (ordered separately). Available also in color black. use for air under high pressure should be always preceded analysis risk in situation accidental disconnection or bursting hose and possible use protections. maximum pressure working fixed acc. to coefficient safety 4:1 approved through the manufacturer for air. Not recommended exceeding 1/3 given force breaking. length standard roll: 200 m. Hose material: yellow blend NBR/PVC with barrier resistant on UV, pressed in a polyester braid in process extrusion hose. Working pressure: from 12.5 bar to 25 bar - depending on the diameter hose and temperatures. Operating temperature: od -30°C up to +75°C (momentarily up to +80°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible metal hose of steel stainless intended for discharge gases with particles liquids, fumes, vapours, conveying dry bulk materials (ash, dusts, grain, granulates), and as hose cover. mounted in installations outlet exhaust gases engines as element absorbing vibration, noise and reducing effects expansion thermal. version standard stays shape. letter F on the end index means version FLOPPY, not maintaining shape. Material: steel AISI 304. Operating temperature: up to +650°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible, popular hose, PVC general use. used for air, water and light chemicals in industry, agriculture, horticulture and for use domestic. Roll length: 60 m. Inner layer: transparent PVC. Reinforcement: a polyester braid. Outer layer: transparent PVC. Working pressure at a temperature of 20°C: from 10 bar to 15 bar - depending on the diameter hose and decreases together with of increase temperatures. Operating temperature: from -5°C to +50°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsConnector reducing silicone reinforced polyester intended is for systems cooling and systems heating in vehicles (water, liquids cooling, air clean or with small amount mist oil). For oils, fuels and oil mist, a version with a fluorosilicone inner layer is recommended. standard length: 102 mm. Pressure safety factor: 3:1. The hose meets the SAE J20R1 standards. Hardness (standard version) approx. 65° Shore (A), density approx. 1.26 g/cm³. color layer outer: blue. Material: rubber silicone. Reinforcement: polyester plies. pressure working: od 1 bar for 7.33 bar (depending on diameter hose). Operating temperature: from -50°C to +180°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA universal, very flexible, unreinforced hose, intended for pressureless (or under very low pressure) conveying water, beer, wine, alcohols, juices, drinks. The absence of phthalates in the hose material recommends it for conveying milk and dairy products and alcohols with a concentration up to 50% and a temperature up to +40°C. not recommended for oils and greasy substances food. used also for liquids in use general-industrial, for light chemicals (acids, bases), for substances solid (powders) and as A guard pipes, lines, cables etc. For the hose, the stated pressure value is the approximate value of the recommended working pressure, assumed for a typical PVC hose, at a safety factor of 5:1. Use of the hose at a specific working pressure should be preceded by a test under operating conditions. Standards and requirements: Food industry, food contact: compliant with the European requirements 1935/2004/EC and 10/2011/EU (simulant fluids A, B, C and D1), 2023/2006/EC (GMP). Hose material: transparent PVC. Working pressure: low, up to a few bar, depends on temperature. Operating temperature: from -15°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong and flexible rubber hose delivery, intended for water, paints, light chemicals, air. It can be used for dispersion water paints epoxy and polyurethane. Not is suitable for paints cellulose, chlorinated-rubber and other containing solvents aromatic np. toluene, xylene or gasoline, as well as for oils, fuels, hydrocarbons aromatic. When selecting for chemical applications we recommend contacting Tubes International. Inner and outer layer conductive (R 5 Ω/m), Layer outer resistant to ozone, aging and conditions atmospheric. Inner layer: black EPDM rubber. Reinforcement: a polyester braid (DN6 ÷ DN25), 2 polyester braids (DN32 ÷ DN38). Outer layer: black EPDM rubber. Working pressure: 20 bar. Operating temperature: from -40°C to +95°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible, strong hose suction - delivery intended for water, sewage. externally Serrated, inside almost smooth. good resistance to external impacts and heavier conditions use. retains high flexibility in sub-zero temperatures. used in systems irrigation, water installations industrial, for emptying septic tanks etc. On special order Available also version ARIZONA EXTREME ELASTIC flexible in very low temperatures (for -40°C). Hose material: grey and green PVC. Reinforcement: rigid-PVC spiral. Working pressure: from 1.5 bar to 7 bar - depending on the diameter hose and temperatures. Operating temperature: od -25°C up to +55°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, very flexible and pliable, resistant to temperature two-layer hose suction - delivery intended for discharge and conveying vapours, fumes and air o high temperature. flame-retardant, resistant chemical, o fairly sound resistance to hot sparks. used in the structure furnaces (steelworks and foundries metals and glass, industry ceramic and chemical), vehicles (installations discharge exhaust gases, stations testing engines etc.), use aviation and military. It is characterised by high compressibility - up to 1:6, a strong construction, and impact resistance thanks to the external spiral. Also available with a stainless steel spiral (from 80 mm diameter). Assembly of the hose on connectors with bridge clamps (lewo-handed). Standard length: from 2 to 10 m - contact Tubes International. Hose material: 2 layer fabric glass, outer Layer coated silicone (grey). Reinforcement: outer spiral with wire and sheet steel galvanized. Operating temperature: od -50°C up to +450°C (momentarily up to +500°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsColorless, transparent, flexible hose fuel o exceptionally low permeability fumes fuels through wall hose. meets American requirements EPA and CARB (permeability for 15 g/m2/24h). patented multilayer The design hose o internal layer with fluoropolymer PVDF resistant na fuels with content ethanol for 100%. resistant na swelling and hardening na result operation hydrocarbons, reduces significantly risk cracking and leakage. minimum extractability secures cleanliness fuels, a exceptionally low factor penetration substances aromatic secures the operator and environment. resistant na ozone and radiation UV (ANSI B175.1 D). flexibility hose facilitates its installations even in tight places and is maintained also in low temperatures, co ensures trouble-free sampling fuels in each position. transparent wall allows na monitoring flow. thanks to internal layer with PVDF hose is resistant na most substances chemical and fuels. can be submerged in fuel (nie recommended only repeated use in high temperatures external). flame-retardant (UL 94 HB). used in modern mowers, saws chain, drills combustion, trimmers for hedges, itp. machines garden. Length of a full hose roll 15 m. pressure working determined relative to pressure bursting at factor safety 1:5. Material: PVDF / TPE (multilayer). temperature use: from -40°C to +82°C. temperature brittleness: -90°C. Hardness: 78° Shore (A). Density: 1.27 g/cm³. Note: The product is packaged in the Tubes International Clean Zone (CLEAN ROOM) in compliance with rigorous standards. Return of the product after opening the package is not possible.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible metal hose of carbon steel intended for discharge gases with particles liquids, fumes, vapours, conveying dry bulk materials (ash, dusts, grain, granulates), and as hose cover. mounted in installations outlet exhaust gases engines as element absorbing vibration, noise and reducing effects expansion thermal. version standard stays shape. letter "F" on the end index means version FLOPPY, not maintaining shape. Material: galvanised carbon steel. Operating temperature: up to +500°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, very soft, extremely pliable and flexible hose characterized by high resistance on bending and lack of memory shape. intended for air, water, light chemicals. retains flexibility in low temperatures. Layer outer resistant to abrasion. resistant to action radii UV, conditions atmospheric. The hose material is free of cadmium and silicone and meets the RoHS requirements. Roll length: 100 m. Inner layer: yellow (Y) or blue (BL) PVC. Reinforcement: a polyester braid. Outer layer: yellow (Y) or blue (BL) PVC. Working pressure at a temperature of 20°C: 20 bar. As the working temperature rises, the hose's working pressure value decreases. Operating temperature: from -25°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery strong and durable hose flat high quality designed for trouble-free and maintenance-free use in heavy conditions terrain. used in particular for water, sludge, sewage and other liquids. made with resistant to hydrolysis and microbes polyurethane - polyether. Reinforcement with circumferentially woven braid polyester bonded and surrounded polyurethane in original process production extrusion thermoplastic polyurethane on hot through braid. hose o high strength on force longitudinal, o minimum elongation under pressure and without tendency for coiling, screwing. excellent resistance to abrasion and breakdown allows operation in heavy, uneven terrain and minimizes wear loaded water hose during possible pulsation pressure. thanks to strength and durability connected easily operation (winding - unwinding) used in solid and temporary systems water o high pressure and flow capacity in industry mining, power, agriculture, in use fire-protection. resistant to wide range substances chemical, microbes, fungi, hydrolysis, conditions atmospheric, UV and ozone. in order to confirmation resistance and conditions use hose contact with Tubes International. maximum pressure working time use fixed acc. to coefficient safety 2:1 approved through the manufacturer (only for water and safe, non-flammable liquids). Dla maximum service life not recommended exceeding 1/3 pressure bursting. length standard roll: 200 m. Hose material: black polyurethane - polyether (PU). Working pressure: from 15 bar to 21 bar - depending on the diameter hose and temperatures. Operating temperature: od -50°C up to +75°C (water).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose silicone reinforced meta-aramid intended is for systems cooling and systems heating in vehicles (water, liquids cooling, air clean or with small amount mist oil). For oils, fuels and oil mist, a version made of fluorine rubber (fluorocarbon) is recommended. length standard: 1000 mm (Available also in section 2000 mm and 3000 mm). Pressure safety factor: 3:1. The hose meets the SAE J20R1 standards. color layer outer: blue. Material: rubber silicone. Reinforcement: plies meta-aramid. pressure working: od 1 bar for 8.75 bar (depending on diameter hose). Operating temperature: from -50°C to +230°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsColorless, glassy transparent, flexible hose free of phthalates and BPA (bisphenol A). intended for conveying and dispensing products food, in particular juices, beverages, water bottled. Nie changes taste and smell products, a properties non-wetting enable total emptying and easy cleaning through flushing. can be used for pumps peristaltic, ale service life is moderate. meets requirements hygienic and for contact with food: European 1935/2004/EC and 10/2011 EU (for conditions and substances acc. to certificate), American FDA, NSF-51, NSF61, 3-A, Japanese #370/1959 and MHLW370(3-D). possible sterilization steam or oxide ethylene. compliant with REACH and California Proposition 65 – nie contains substances hazardous and banned. Length of a full hose roll 15 m (od diameter internal 50.8 mm - 6 m). The given working pressure is determined relative to the bursting pressure at a safety factor of 1:5. Material: PVC (special). Maximum operating temperature: +74°C. temperature brittleness: -36°C. Hardness: 66° Shore (A). Density: 1.21 g/cm³. Note: The product is packaged in the Tubes International Clean Zone (CLEAN ROOM) in compliance with rigorous standards. Return of the product after opening the package is not possible.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsConnector anti-vibration silicone with one corrugation reinforced polyester intended is for systems cooling and systems heating in vehicles (water, liquids cooling, air clean or with small amount mist oil). For oils, fuels and oil mist, a version made of fluorine rubber (fluorocarbon) is recommended. Pressure safety factor: 3:1. meets standard SAE J2006 R3. Hardness (standard version) approx. 65° Shore (A), density approx. 1.26 g/cm³. color layer outer: blue. Material: rubber silicone. Reinforcement: polyester plies. Operating temperature: from -50°C to +180°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible hose intended for discharge hot exhaust gases engines petrol and diesel. used as hose workshop unrolled on floor adapted for drum systems winding, hose for channels suction or on stations for testing engines. resistant to creasing thanks to reinforcement white, thick, round spiral nylon (PA), cover with outside black TPE. resistant chemical, in particular on vapours gasoline and oil, a also ozone, hydrolysis, microbes and radiation UV. Not contains halogens and softeners. hose P-G-EX 1 should be used together with with vacuum system discharge exhaust gases, using appropriate connector between a hose a outlet exhaust gases with engine. Other diameters are available on special order in the scope 40 ÷ 250 mm. Assembly of the hose on connectors with bridge clamps (prawo-handed). length standard: 2.5 m, 5 m, 7.5 m, 10 m, 15 m and 20 m. Thickness measured between the spiral: 0.4 mm. Hose material: fabric polyester impregnated black coating TPE (thermoplastic elastomer). Reinforcement: spiral nylon in cover TPE protective against abrasion. Operating temperature: od -40°C up to +150°C (momentarily +170°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong hose suction - delivery, o thick wall, intended for conveying substances food requiring the use of rubber free of odour and taste. Contains no phthalates or bisphenol A. hose specially designed for conveying oils and fats. Widely used in industry oil and fat. Layer outer resistant to fat and aging. standards and requirements : industry food, contact with food 1935/2004/EC and 2023/2006/EC (GMP). Layer inner compliant with FDA 21 CFR 177.2600, D.M. 21/03/73. Inner layer: white NBR rubber/PVC. Reinforcement: two layer cord synthetic, steel spiral. Outer layer: blue, smooth rubber CR. Working pressure: 10 bar. Vacuum: 0.9 bar. Operating temperature: -15°C up to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA universal flexible high quality hose polyurethane manufactured in Great Britain. intended for water, air, oils, fuels, greases, chemicals, granulates. as hose without reinforcement is suitable for very low pressure for a few bar and as hose cover. crystalline transparent wall allows excellent observation medium. smooth surface inner facilitates flow and cleaning. hose strong od similar hoses PVC, more retaining its shape, well resistant to kinking, flexible in low temperatures. made with polyurethane – polyether, resistant to hydrolysis and abrasion. Contains no cadmium, silicone, plasticisers or halogen compounds. In accordance with EU regulations, use for food products is possible after first carrying out the required migration tests using appropriate model fluids simulating the given type of food (the material used to make the hose complies with the requirements of FDA 21 CFR 175.105, 177.1680, 177.2600 and WRAS for water 23°C). Hose material: soft, transparent polyurethane (polyether) free of phthalates. Operating temperature: from -30°C to +70°C (momentarily up to +100°C). temperature brittleness: -70°C. Approximate value of the recommended working pressure: from 2.5 bar to 4.8 bar - depending on the diameter hose. As the working temperature rises, the hose's working pressure value decreases.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsResistant to vacuum hose suction-delivery intended for water cooling in smelters, foundries and we all use, where hose rubber works close source heat. coated fiber glass resistant to temperature up to +530°C caused radiation thermal. used in systems cooling. especially recommended for installation water at furnaces metallurgical. resistant to momentary action splashes red-hot hot metal. length standard: 60 m or 120 m. Inner layer: black rubber SBR. Reinforcement: cord synthetic, steel spiral. Outer layer: EPDM rubber / fiber glass. Working pressure: 10 bar. Vacuum: 0.9 bar. Operating temperature: od -40°C up to +70°C, outer up to +530°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsElbow reducing silicone 90° reinforced polyester intended is for systems cooling and systems heating in vehicles (water, liquids cooling, air clean or with small amount mist oil). For oils, fuels and oil mist, a version with a fluorosilicone inner layer is recommended. Standard arm length: 102 mm. Pressure safety factor: 3:1. The hose meets the SAE J20R1 standards. Hardness (standard version) approx. 65° Shore (A), density approx. 1.26 g/cm³. color layer outer: blue. Material: rubber silicone. Reinforcement: polyester plies. pressure working: od 1 bar for 7.33 bar (depending on diameter hose). Operating temperature: from -50°C to +180°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPneumatic extension - ready line for air made with hose SOFT PLUS. terminated brass socket and a plug Eurostandard DN7.2 matching for commonly encountered on market quick couplings. equipped in limiters deflection. ideal solution for connection tools pneumatic, easy in handling, dampening vibration. Ensures a high standard of operator work. Available lengths: 10 or 15 m. Inner layer: yellow (Y) or blue (BL) PVC. Reinforcement: a polyester braid. Outer layer: yellow (Y) or blue (BL) PVC. Working pressure at a temperature of 20°C: 20 bar and decreases together with of increase temperatures use. Operating temperature: from -25°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, very pliable and flexible, having resistance to creasing and twisting hose intended for discharge dusts, contaminants air, fumes welding. commonly used in systems vacuum cleaners industrial. shaped in profile hose outer spiral reinforcing, left-handed, allows screwing on appropriate ends for vacuum cleaners with a left-hand thread (ends plastic o index ME-EVA...). Assembly of the hose with clamps on suitable ends, pipe spigots etc. is also possible. Hose material: grey ethylene-vinyl acetate (EVA). Reinforcement: spiral reinforcing shaped in profile hose. Operating temperature: od -30°C up to +60°C - for hose EVA and od -25°C up to +60°C - for hose EVA IVH (podworking pressure depends on temperature).
