Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight suction and discharge hose designed for the transfer of milk and food substances, requiring the use of odorless and tasteless rubber. It contains no plasticizers, phthalates, or animal-derived substances. The special "CRUSH PROOF" hose construction with a plastic spiral allows the hose to return under pressure to its original shape after being accidentally run over, for example, by a forklift. The hose is lightweight and easy to handle. It is primarily designed for unloading milk from tankers. Not recommended for heavy-duty working conditions in process applications. Norms and requirements: 1) General: EC 2002/95 (RoHS), EC 1907/2006 (REACH). 2) Food industry, food contact: EC 1935/2004, EC 2023/2006 (GMP). Inner layer compliant with D.M. 21/03/73, FDA 21 CFR 177.2600, BfR, RAL (German Institute for Quality Assurance and Certification). Inner layer: white NR/NBR blend. Reinforcement: synthetic braid, PET spiral. Outer layer: blue synthetic rubber. Working pressure: 16 bar. Vacuum: 0.7 bar. Operating temperature: from -30°C to +85°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSuction and discharge hose intended for the transfer of food substances, requiring the use of odorless and tasteless rubber. It does not contain phthalates and bisphenol A. The inner layer made of NBR/PVC is resistant to standard cleaning agents and processes used in the food industry. Suitable for milk and its derivatives as well as fatty food substances. Widely used in the food industry under standard operating conditions. Norms and requirements: Food industry, contact with food: 1935/2004/EC and 2023/2006/EC (GMP). D.M. 21/03/73, FDA 21 CFR 177.2600, BfR XXI cat. 2. Inner layer: white NBR/PVC rubber. Reinforcement: synthetic braid, steel spiral. Outer layer: blue synthetic rubber. Working pressure: 10 bar. Vacuum: 0.9 bar. Operating temperature: from -15°C to +90°C.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong suction and discharge hose with an inner layer made of chemically resistant ultra-high molecular weight polyethylene (UPE, UHMWPE). The inner layer of UPE is resistant to most aggressive chemicals, antistatic (R<106Ω), compliant with food hose requirements, smooth, with a low friction coefficient during flow, preventing medium deposition on the walls. This significantly facilitates cleaning and allows for use in the cosmetic, pharmaceutical, and food industries. Reinforced with synthetic cord and steel spirals. The outer layer is made of chemically resistant EPDM rubber, antistatic (R<106Ω), abrasion-resistant, ozone-resistant, weather-resistant, and fire-resistant. Compliant with EN 12115:11 type Ω/T requirements, fully antistatic - ensures the dissipation of electrostatic charges through the hose walls (R<109Ω). This enables the use of the hose in explosion hazard zones. The hose is widely used for various applications in the chemical industry. Standards and requirements: Chemical hoses: EN 12115:2011 (type Ω/T). Food industry, contact with food (inner layer): 1935/2004/EC, 2023/2006/EC (GMP), 10/2011/EU (simulated fluids A, B, C, D2). Installation: use smooth fittings with a spigot ("tail" to the hose) without sharp or high ribs that could cut or damage the inner layer of UPE when tightened. The spigot diameter should be precisely matched to the hose diameter to ensure tightness. Installation with clamp sleeves or band clamps. Confirmation of resistance and application conditions requires contact with Tubes International, especially for temperatures above 50°C. Inner layer: black UPE polyethylene. Reinforcement: textile cord, steel spiral. Outer layer: black EPDM rubber. Working pressure: 16 bar. Operating temperature: from -30°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSuction and discharge hose designed for the transfer of liquid products from the petrochemical industry containing up to 50% aromatic hydrocarbons, fuels, gasoline, diesel, heating oil, lubricating oils, etc. The inner layer is made of black, smooth, antistatic (dissipating electric charges 10^4 Ω < R < 10^9 Ω) NBR rubber. Reinforcement with synthetic cord and steel spirals. The outer layer is made of black NBR rubber, resistant to oil and weather conditions. Relatively low weight and flexible hose construction make it easy to handle, characterized by a wide, universal application for fuel transfer or other compatible media in typical working conditions. Inner layer: black NBR rubber. Reinforcement: synthetic cord, steel spirals. Outer layer: black NBR rubber. Working pressure: 10 bar. Vacuum: 0.9 bar. Operating temperature: from -35°C to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong RIG STAR D discharge hose and RIG STAR SD suction-discharge hose are designed for the transfer and handling of crude oil, petrochemical products, and drilling cuttings mixed with crude oil (up to 50% aromatic compounds). It can also be used for cement, barite, seawater, and brine. The inner layer is made of black, smooth, antistatic NBR rubber. It features a copper wire ensuring electrical continuity between the hose ends. The outer layer is made of CR chloroprene rubber, flame-retardant, resistant to abrasion, ozone, seawater, and weather conditions. Designed as a specialized OFFSHORE hose for operation on drilling platforms. Widely used on North Sea platforms. It can also be successfully used in land applications. Inner layer: black NBR rubber. Reinforcement: synthetic cord, steel spiral. Outer layer: black CR rubber. Working pressure: 20 bar. Vacuum: 0.9 bar. Operating temperature: from -30°C to +85°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSuction and discharge hose intended for the transfer of fuels and liquid products from the petrochemical industry, containing up to 50% aromatic compounds, including gasoline, diesel fuel, and mineral oil. It can be used for tankers, storage tanks, loading stations, and industrial equipment. The hose is widely used in industry and transport under standard working conditions. The inner layer is made of smooth, black, antistatic (R <106 Ω/m) NBR rubber. Reinforcement with synthetic cord and steel spiral. It has two copper wires ensuring electrical continuity between the hose ends – provided there is a proper connection to the ends. The outer layer is made of black SBR/NBR rubber, antistatic (R <106 Ω/m), resistant to abrasion, oil, ozone, and weather conditions. Inner layer: black NBR rubber. Reinforcement: synthetic cord, steel spiral. Outer layer: black SBR/NBR rubber. Working pressure: 10 bar. Vacuum: 0.9 bar. Operating temperature: from -30°C to +85°C (up to +100ºC for oil).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSuction and pressure hose made according to platinum-enhancing technology, resistant to UV and ozone. Compliant with the requirements of 1935/2004 CE, FDA 21 CFR 177.2600, USP class VI, European Pharmacopoeia 3.1.9, BfR XV, Journal Officiel Brochure 1227. At operating temperatures above +100°C, the maximum working pressure stated in the tables should be reduced by 1% for each 1°C increase in temperature. The safety factor is 4:1. Inner layer: translucent silicone. Reinforcement: four polyester braids, steel spiral (AISI 316). Outer layer: translucent silicone. Operating temperature: from -60°C to +180°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSuction and pressure hose made according to platinum-enhancing technology. The inner layer of the hose is extruded. Compliant with FDA 21 CFR 177.2600, USP Class VI, European Pharmacopoeia 3.1.9, BfR XV, Journal Officiel Brochure 1227, and CE Directive 1935/2004. Maximum vacuum 736.6 mm Hg (0.98 bar). At operating temperatures above +100°C, the maximum working pressure specified in the tables should be reduced by 1% for each 1°C increase in temperature. Inner layer: translucent silicone. Reinforcement: four polyester braids, AISI 316 steel spiral. Outer layer: translucent silicone. Operating temperature: from -60°C to +180°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible suction and discharge hose intended for water, juices, beverages, and other food products, reinforced with a hard PVC spiral, which also contributes to the hose's lightweight. Additionally, the impact-resistant spiral ensures good resistance to vacuum and hose kinking. The transparent wall facilitates easy visual monitoring of the medium flow, and the absence of phthalates in the material allows the hose to be used for the transfer of milk and its derivatives, as well as alcohols with a concentration of up to 50%. It is not recommended for oils and fatty food substances. The smooth inner surface reduces flow losses and ensures ease of cleaning. The outer surface is also smooth, facilitating the installation of fittings using tapes or clamps, reducing external damage from abrasion, and aiding in keeping the hose clean. As a hose reinforced only with a hard PVC spiral, lacking a braid, it undergoes certain elongations under pressure, which should be considered in application, especially at temperatures above 40°C. Standards and requirements: Food industry, contact with food: compliant with European requirements 1935/2004/EC and 10/2011/EU (simulant fluids A, B, C, and D1), 2023/2006/EC (GMP). Hose material: transparent PVC. Reinforcement: hard PVC spiral. Working pressure: from 5 bar to 7 bar, depending on the hose diameter. Operating temperature: from -15°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, highly flexible suction and discharge hose intended for water, juices, beverages, and alcohols with a concentration of up to 50% (and up to 20% for hoses with the SO-PVCSTAR-MS index), and other food products. Not recommended for food substances containing fats and oils. Suitable for milk and its derivatives (however, hoses with the SO-PVCSTAR-MS index are not suitable for milk and dairy products). Reinforcement with a steel wire spiral embedded in the PVC wall provides good resistance to vacuum and hose collapse. The smooth inner surface reduces flow losses and ensures ease of cleaning. The transparent wall allows for easy visual monitoring of flow. In the absence of direct contact with food (in industry, construction, agriculture), it can be used for light chemicals, water, sludges, and wastewater, and other fluids (without fats, oils, and hydrocarbons). As a non-braided hose, it exhibits some elongation under pressure. Standards and requirements: Food industry, food contact: compliant with European requirements 1935/2004/EC and 10/2011/EU (simulants A, B, C, and D1), 2023/2006/EC (GMP). For hoses with the SO-PVCSTAR-MS index: Food industry, food contact: compliant with European requirements 1935/2004/EC and 10/2011/EU (simulants A, B, and C), 2023/2006/EC (GMP). Hose material: transparent PVC. Reinforcement: galvanized steel spiral. Working pressure: from 6 bar to 11.5 bar, depending on the hose diameter. Operating temperature: from -15°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible, bendable, and almost smooth inside hose designed for the extraction and transport of dust, powders, granules, grains, flakes, and similar lightweight materials with abrasive properties. Made from polyether-polyurethane, it has good resistance to abrasion, ozone, weather conditions, hydrolysis, and biological corrosion. Suitable for contact with food for the transport of bulk and liquid food materials, including fatty or oily substances. Not recommended for milk and its derivatives. Reinforcement with a hard PVC spiral provides good crush resistance. The antistatic version of the hose features a copper antistatic wire embedded on the outer side of the hose along the reinforcing spiral. Effective grounding of the wire ensures a sufficient level of electrostatic charge dissipation for many applications. Particularly used in the agri-food industry, plastics, building materials, etc. The WIND STAR PU hose complies with European requirements 10/2011/EU (simulants A, B, C, D2, and E) and American FDA 21 CFR 177.2600 "d", "e", "f" (dry, liquid-water, fatty). Additional information regarding food and pharmaceutical applications – see the section "Hoses for food products." Hose material: transparent polyether-polyurethane. Reinforcement: hard PVC spiral. Operating temperature: from -40°C to +80°C (working pressure dependent on temperature).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery lightweight, flexible hose designed for the transport of air, oil and fuel vapors, dust, powders, very fine wood shavings, chips, and light bulk materials. Suitable for all types of industry, particularly commonly used for dust extraction and the removal of vapors and fine solid particles in the woodworking, furniture, ceramics, and plastics industries. Highly flexible and very axially compressible, also flexible at low temperatures. Good abrasion resistance, in the AS version made of polyester, also resistant to microbes and hydrolysis. Non-toxic, free from halogen compounds and plasticizers. Resistant to oils and gasoline. Installation on couplings with bridge clamps (right-handed). Other diameters may be available upon special request. The hose is available in the following versions: P2 PU – version with polyester-polyurethane, with very good abrasion resistance; P2 PU AS – antistatic version (R ≤108 Ω, compliant with TRBS 2153, for extraction also with TRGS 727), made of polyester-polyurethane, with good abrasion resistance, resistant to microbes and hydrolysis. Hose material: transparent polyester-polyurethane (P2 PU), polyester-polyurethane (P2 PU AS). Wall thickness measured between the spiral: 0.4 mm. Reinforcement: spiral made of steel wire. Operating temperature: from -40°C to +100°C (temporarily up to +125°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsColorless, semi-transparent, flexible hose made of platinum-cured silicone rubber. Used in the pharmaceutical, cosmetic, and biotechnology industries, medical devices, cell culture, sterile filling lines, water for injection (WFI), chemistry and blood analyzers, and liquid chromatography. Can be used in peristaltic pumps – moderate lifespan. Characterized by an exceptionally smooth inner surface that prevents the deposition and adhesion of contaminants inside the hose and the growth of bacteria. This facilitates complete cleaning and sterilization of the hose. The smooth inner layer also reduces flow resistance through the hose. Low extractability, non-toxicity, non-hemolytic, and non-pyrogenic ensure total fluid purity in sensitive applications. Meets hygiene requirements of US FDA 21 CFR 177.2600, NSF-51, 3-A, and USP Class VI as well as ISO 10993 for contact with blood, bodily fluids, and tissues for up to 30 days. Sterilization possible by steam (30 min, 1 bar, 121°C), ethylene oxide, or radiation (up to 2.5 Mrad). Full roll length of the hose is 15 m. Hose available in inch and metric sizes. Working pressure defined relative to burst pressure with a safety factor of 1:5. Material: silicone (platinum). Maximum operating temperature: +204°C. Brittleness temperature: -80°C. Hardness: 50° Shore (A). Density: 1.14 g/cm³. Note: Product packaged in the Clean Room of Tubes International (CLEAN ROOM) adhering to strict standards. Return of the product after opening the packaging is not possible.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong suction and discharge hose with an inner layer made of chemically resistant polyethylene with ultra-high molecular weight (UPE, UHMWPE), black and white MARBLE type, smooth, antistatic (R<106 Ω). The inner layer is resistant to most acids and bases as well as many other aggressive chemicals (at elevated but not very high temperatures), making the hose widely used in the chemical and petrochemical industries. The MARBLE type UPE inner layer also complies with food hose requirements, features a low friction coefficient during flow, and prevents medium deposition on the walls. This significantly facilitates cleaning and allows for use in the cosmetic, pharmaceutical, and food industries as well. Reinforced with synthetic cord and steel spiral. The outer layer is made of chemically resistant EPDM rubber, antistatic (R < 106 Ω), abrasion-resistant, ozone-resistant, and weather-resistant. Compliant with EN 12115:11 requirements (type Ω/T, fully antistatic (R < 109 Ω) - ensures the dissipation of electrostatic charges through the hose walls, allowing use in all explosion hazard zones. Standards and requirements: Chemical hoses: EN 12115:2011 (type Ω/T). Food industry, contact with food (inner layer): 1935/2004/EC, 2023/2006/EC (GMP), 10/2011/EU, FDA 21 CFR 177.1520 (c), D.M. 21/03/73. Explosive atmospheres: ATEX directive (zones: 0, 1, 2, 20, 21, 22), EN 50014/ IEC 60079-0. Installation: use smooth fittings with a spigot ("tail" to the hose) without sharp or high ribs that could cut or damage the UPE inner layer when tightened. The spigot diameter should be precisely matched to the hose diameter to ensure tightness. Installation with clamp sleeves or band clamps. Inner layer: white-black UPE polyethylene. Confirmation of resistance and application conditions requires contact with Tubes International, especially for temperatures above 50°C. Inner layer: white-black UPE polyethylene. Reinforcement: synthetic cord, steel spiral. Outer layer: black EPDM rubber. Working pressure: from 12 bar to 16 bar - depending on the hose diameter. Operating temperature: from -35°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe HYPERLINE FX hose is an optimal solution for industrial applications where high flow rates, chemical and temperature resistance, and permeation resistance are required. It is perfectly suited for the transfer of chemicals, fuels, oils, paints, solvents, adhesives, dyes, gases, and steam, detergents, water, and food substances. At operating temperatures above +160°C, the maximum working pressure specified in the table should be reduced by 1% for each 1°C above this temperature. For example, at a temperature of 180°C, the maximum working pressure for the AF-FXSS-10 hose is: 100 bar – (180°C-160°C) x 1 = 100 bar – 20% = 80 bar. In cases where a substance that is a poor conductor and has potential electrification properties flows through the PTFE hose, the electric charge will accumulate on the inner surface of the PTFE, and to avoid static electricity issues, an antistatic AS variant of PTFE is used. Antistatic Teflon in the AS version contains graphite evenly distributed in the PTFE and has a resistance R <10^8 Ω (according to ISO 8031 annex A). Hose material: smooth inside, corrugated outside PTFE (Teflon) - natural white and antistatic - black. Reinforcement: AISI 304 steel braid. Working pressure: from 50 bar to 110 bar - depending on the hose diameter. Operating temperature: from -70°C to +260°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsARMORVIN HNA is a suction and discharge hose designed for the transfer of juices, beverages, milk, water, wine, beer, alcohols with a concentration of up to 50%, and other food products. Not recommended for fatty substances such as oils. Besides food applications, it can be used in industries such as construction and agriculture for light chemicals, dirty water, sludges, sewage, and other fluids that do not contain fats, oils, and hydrocarbons. It is also suitable for air, and the steel spiral embedded in the hose wall allows it to be used for vacuum transfer of powders, granules, and other mildly abrasive bulk materials. When dealing with such substances, wear resistance and potential static electricity issues should be considered. The smooth inner surface reduces flow losses and ensures ease of cleaning. Standards and requirements: Food industry, food contact: compliant with European regulations 1935/2004/EC and 10/2011/EU (simulative fluids A, B, C, and D1), 2023/2006/EC (GMP). Hose material: transparent PVC. Reinforcement: galvanized steel spiral. Working pressure: from 2 bar to 7 bar - depending on the hose diameter. Vacuum at 20°C: from 0.7 bar to 0.85 bar - depending on the hose diameter. Operating temperature: from -5°C to +65°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible and elastic, easy to operate suction and discharge hose designed for the transfer of fatty and non-fatty food substances, requiring the use of odorless and tasteless rubber. It contains no plasticizers, phthalates, or animal-derived substances. The inner layer made of NBR is resistant to standard cleaning agents and processes used in the food industry. The outer layer is resistant to temporary contact with animal and vegetable fats. Particularly recommended for applications requiring a small bending radius with good pressure and vacuum resistance. Widely used in the dairy industry and for the transfer of milk under normal operating conditions. Not recommended for transfer applications in heavy working conditions and under pulsating pressure. Standards and requirements: 1) General: EC 2002/95 (RoHS), EC 1907/2006 (REACH). 2) Food industry, contact with food: EC 1935/2004, EC 2023/2006 (GMP). Inner layer compliant with D.M. 21/03/73, FDA 21 CFR 177.2600, BfR, 3A Sanitary Standards, RAL (German Institute for Quality Assurance and Certification). Inner layer: white NBR rubber. Reinforcement: synthetic cord, steel spiral. Outer layer: blue synthetic rubber. Working pressure: 10 bar. Vacuum: 0.9 bar. Operating temperature: from -20°C to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsColorless, transparent, soft, and flexible hose for laboratory and food applications. Ideal for analytical devices, condensers, incubators, desiccators, as gas and drainage lines. Suitable for food and biopharmaceutical products. Also commonly used for cooling computer processors. The glassy smooth, pore-free inner surface prevents the deposition and adherence of contaminants inside the hose and facilitates cleaning. Complete repeatability of hose parameters across all batches. Can be used with peristaltic pumps, but lifespan is limited. The hose is free from phthalates and BPA (Bisphenol A). Meets hygiene and food contact requirements: European 1935/2004/EC and 10/2011 EU (for conditions and substances according to certification), American FDA, NSF-51, 3-A, USP Class VI, Japanese #370/1959. Sterilization possible by steam, ethylene oxide, or radiation. Compliant with REACH and California Proposition 65 – does not contain hazardous and prohibited substances. Full roll length of the hose is 15 m. Available VACUUM version with thicker walls for vacuum applications. The specified working pressure is defined relative to the burst pressure with a safety factor of 1:5. Material: PVC (special). Maximum operating temperature: up to +74°C. Brittleness temperature: -46°C. Hardness: 56° Shore (A). Density: 1.21 g/cm³. Note: Product packaged in the Clean Room of Tubes International (CLEAN ROOM) adhering to strict standards. Return of the product after opening the packaging is not possible.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong and flexible suction-discharge hose made of PVC intended for water and sewage. Smooth inner wall, slightly corrugated on the outside. Good resistance to external impacts and harsher operating conditions. Flexible at low temperatures. Used in irrigation systems, tankers, and vacuum trucks, for sewer cleaning and septic tank emptying. Hose material: green PVC. Reinforcement: hard PVC spiral. Working pressure: from 1.8 bar to 4.5 bar - depending on the hose diameter and temperature. Operating temperature: from -25°C to +55°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMedium thickness flexible hose with reinforcing spiral, designed for suction and transport of bulk abrasive materials, granules, chips, shavings, etc. Used in various industrial sectors, particularly often employed for the removal of solid particles in the plastics, wood, construction materials, and metal industries. Flexible and elastic, even at low temperatures. Smooth inside, low compressibility. Dense and thick steel spiral coated with white PVC ensures high pressure parameters, is corrosion-resistant, and has good adhesion to the hose material. Hose with good abrasion resistance, also resistant to oils and gasoline. Installation on couplings with bridge clamps (right-handed). Other diameters may be available on special order. Versions: P3 PU – standard version, made of polyester-polyurethane, highly abrasion-resistant; P3 PU AS – antistatic version (R ≤108 Ω), compliant with TRBS 2153 and for suction also with TRGS 727, made of polyether-polyurethane, with good abrasion resistance, resistant to microbes and hydrolysis; P3 PU EL – electrically conductive version (R ≤104 Ω), compliant with ATEX 2014/34/EU, TRBS 2153 and for suction also with TRGS 727, can be used in explosion hazard zones after risk assessment, made of black polyether-polyurethane, with good abrasion resistance, resistant to microbes and hydrolysis. Hose material: transparent polyester-polyurethane (P3 PU), transparent polyether-polyurethane (P3 PU AS), black polyether-polyurethane (P3 PU EL). Wall thickness measured between the spiral: 0.8 ÷ 1.5 mm (depending on hose diameter). Reinforcement: spiral made of steel wire coated with white PVC. Operating temperature: from -40°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal, lightweight, highly flexible suction and discharge hose designed for general industrial applications for water and light chemicals, other liquids (excluding fats, oils, and hydrocarbons). It can also be used for air, vacuum transfer of dust and powders – abrasion resistance and potential static electricity issues should be considered. It can be used (at temperatures up to +40°C) for liquid and semi-liquid food products such as juices, beverages, beer, wine, alcohols up to 50% concentration, milk, and dairy products. It is not recommended for oils and fatty food substances. The reinforcement with a steel wire spiral embedded in a soft PVC wall provides good resistance to vacuum and hose collapse. The transparent wall allows for easy visual monitoring of flow. As a hose reinforced only with a steel spiral (without a braid), it exhibits some elongation under pressure, which should be taken into account in applications, especially at elevated temperatures. The METALFLEX PVC hose complies with European regulations 1935/2004/EC, 10/2011/EU (simulants A, B, C, and D1), 2023/2006/EC (GMP), and FDA CFR 21 175.300 and 175.1210. It is suitable for temporary contact with food during the transfer of food substances - under the conditions specified in the manufacturer's declaration of conformity (available from Tubes International). Hose material: transparent, soft PVC. Reinforcement: galvanized steel spiral. Working pressure for a temperature of 20°C: from 1 bar to 9 bar - depending on the hose diameter. As the operating temperature increases, the working pressure value of the hose decreases. Operating temperature: from -10°C to +65°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe version of the HYPERLINE hose without a braid (Tube Only) is externally spiral corrugated (right-handed) and internally smooth. The hose combines the advantages of a flexible corrugated hose and a smooth-walled hose with undisturbed flow. The standard version is made of natural, semi-transparent PTFE, allowing for visual flow monitoring. The antistatic AS version made of carbon-filled Teflon (black) ensures the dissipation and dispersion of electric charges for substances and conditions at risk of static electricity. The hose material meets FDA requirements (21 CFR 177.1550 for the standard hose, 21 CFR 178.3297 for the antistatic version). It is flame-retardant (UL94 V-0) and has a high oxygen index (LOI). It can be used for the transfer of chemicals, foodstuffs, fuels, oils, paints, solvents, adhesives, dyes, and detergents under very low pressure conditions. Ends can be fitted with crimped stainless steel tube sleeves. The relationship between working pressure and temperature for the HYPERLINE FX Teflon hose without a braid applies only up to a temperature of 150°C. Above this temperature, there is a decrease in working pressure and vacuum. If the hose is to be used above these temperatures, this must be taken into account, and appropriate tests should be conducted under operating conditions. Available versions: standard and antistatic. Hose material: PTFE (Teflon). Operating temperature: from -70°C to +150°C (up to +260°C - working pressure of the hose dependent on temperature).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose with enhanced abrasion resistance for use with cold and hot water pressure washing equipment. Resistant to detergents in aqueous solutions used, for example, in pressure washers, oils, ozone, and weather conditions. Inner layer: black synthetic rubber. Reinforcement: single or double steel braid. Outer layer: micro-perforated polyurethane. Working pressure: from 210 bar to 400 bar, depending on the diameter and type of hose. Operating temperature: from -40°C to +120°C (temporarily up to +155°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight and flexible hose designed for the transport of air, dust, powders, wood shavings, fine chips, lightweight bulk materials, etc. Specifically designed according to the requirements of the woodworking and furniture industries, it can also be used in other industrial sectors. Antistatic and flame-retardant, it ensures high work safety. Flexible and elastic, even at low temperatures. Less compressible than the SMARTFLEX® 0.4 hose, but smoother on the inside. With very good abrasion resistance, also resistant to microbes and hydrolysis. Free from halogen compounds and plasticizers. Resistant to oils and gasoline. The optimal direction of medium flow is marked with an arrow. The wall thickness of the hose is measured between the spiral. Installation on couplings with bridge clamps (right-handed). Other diameters may be available upon special request. Antistatic properties: permanently antistatic (according to ISO 8031 resistance R <109 Ω, according to German technical regulations TRGS 727 (6.4.2.4) specific resistance R < 2.5 x 108 Ω, according to directive 2014/34/EU (ATEX) can be used in specific explosion hazard zones - which must be preceded by a risk analysis). After effective double grounding of the spiral, it can be treated as electrically conductive – in accordance with the recommendations of BGI 739-2. Flame-retardant – according to DIN 4102 class B1. Hose material: transparent polyester-polyurethane. Wall thickness measured between the spiral: 0.6 mm. Reinforcement: spiral made of steel wire. Operating temperature: from -40°C to +100°C (temporarily up to +125°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-quality, flexible hose in cream color, specifically designed for the pharmaceutical industry, biotechnology, and laboratories. It has high fatigue resistance, exceptionally long service life in peristaltic pumps, and good resistance to spallation (the chipping of micro-particles from the hose material due to rotor pressure). It also features very low permeability to gaseous media, low absorption levels of transmitted products, and good resistance to acids, bases, and oxidation. Ideal for use in diagnostic processes, sampling and culturing of in vitro cell cultures, vaccine production, bioreactors, sterile filling lines, fermentation processes, extraction, and purification. The opaque wall of the hose protects sensitive products from UV radiation. The hose complies with USP Class VI requirements and is completely non-cytotoxic, non-hemolytic, and non-pyrogenic. Compliant with ISO 10993 for contact with blood, bodily fluids, and tissues for up to 30 days. Meets NSF-51 requirements for food contact. Multiple sterilization by steam in autoclaves is possible (30 min, 1 bar, 121°C), CIP and SIP cleaning of installations, ethylene oxide, or radiation (gamma Cobalt 60 up to 5 Mrad). Flame resistant (UL 94-HB). Full hose roll length is 7.5 m. Working pressure specified relative to burst pressure with a safety factor of 1:5. Material: thermoplastic elastomer (TPE). Operating temperature: from -51°C to +135°C. Brittleness temperature: -75°C. Hardness: 64° Shore (A). Density: 0.98 g/cm³. Note: Product packaged in the Clean Room of Tubes International with strict standards maintained. Return of the product after opening the packaging is not possible.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSuction and discharge hose intended for the transfer of industrial water, sewage, sludges, non-corrosive liquids, etc. Lightweight, flexible, resistant to kinks and vacuum. The outer layer is resistant to ozone and weather conditions. Commonly used for pumps in industry, construction, and agriculture. Installation – depending on the diameter and type of fittings using clamps, brackets, compression sleeves, tapes. Standard length: 60 m (or 120 m - contact Tubes International). Inner layer: black SBR rubber. Reinforcement: synthetic cord, steel spiral. Outer layer: black SBR rubber. Working pressure: from 5 bar to 10 bar, depending on the hose diameter. Vacuum: 0.9 bar. Operating temperature: from -30°C to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBlack flexible universal hose with exceptional resistance to aging, weather conditions, and ozone, with good chemical resistance. Resistant to temperatures in a wide range from -60°C to +135°C. Extremely flexible, elastic, with high fatigue resistance to deformation, resistant to abrasion. Excellent for use in peristaltic pumps. Used for transfer and dosing in industry and services, e.g., for dispensing soap and disinfectants, cleaning agents, caustic soda, etching and galvanizing chemicals, in glass and window washing systems, etc. The soft hose material (61° Shore (A)) is very flexible and provides excellent longevity of up to 1000 hours of operation in a peristaltic pump. The hose is an alternative to commonly used hoses made from traditional rubber blends such as EPDM and chloroprene. It has good chemical resistance to a range of chemicals, particularly acids and bases, oxidizing agents such as hydrogen peroxide, sodium hypochlorite, or ozone (300 pphm). Resistant to a variety of animal and vegetable fats. Not recommended for hydrocarbons. Resistant to aging and UV radiation. Characterized by low gas permeability compared to rubber hoses. Hose connection by welding is possible. The VACUUM version with thick walls is designed for continuous operation with vacuum and is resistant to cracking and aging. Full hose roll length: 15 m. Working pressure specified relative to burst pressure with a safety factor of 1:5. Material: norprene® - thermoplastic elastomer (TPE). Maximum operating temperature: +135°C. Brittleness temperature: -60°C. Hardness: 61° Shore (A). Density: 0.98 g/cm³. Note: Product packaged in the Clean Room of Tubes International (CLEAN ROOM) adhering to strict standards. Return of the product after opening the packaging is not possible.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible hose designed for industrial cooling systems (an alternative to copper tubes) and automotive air conditioning (only for filling and testing functions). Specifically for refrigerants (R22, R134a, R404a, R407c, R410a, R507) and compressor oils of the POE and PAG types. The hose in sizes from 1/12" to 1/4" can also be used for CO2 (R-744) transmission - using CO2 as a refrigerant requires pressures approximately 10 times higher than conventional refrigerants. Inner layer: polyamide (PA), for diameters from 1/12" to 1/4" a PA and TPE (thermoplastic elastomer) blend. Reinforcement: polyester braid. Outer layer: micro-perforated, abrasion-resistant polyurethane. Working pressure: from 45 bar to 120 bar, depending on hose diameter. Operating temperature: from -45°C to +130°C (for water and air up to +70°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSuction and discharge hose intended for the transfer of various chemical substances, mainly for acid, base, ketone, formaldehyde, industrial alcohol, and glycol solutions. Frequently used in industrial plants for draining contaminated water and process water. Also suitable for seawater. Inner and outer layer antistatic R≤106 Ω/m. Available pressure version (without steel spiral) - ORLANDO hose. Vacuum: 0.9 bar. Inner layer: black EPM (EPR) rubber. Reinforcement: synthetic cord, steel spiral. Outer layer: black EPM (EPR) rubber. Working pressure: 10 bar. Operating temperature: from -40°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, very flexible and pliable hose designed for the discharge of chemically aggressive vapors and for operation at elevated temperatures. Good temperature resistance, good resistance to acid and solvent vapors. Also resistant to UV radiation, ozone, hydrolysis, and biological corrosion. Durable against bending. Used for mechanical vapor extraction, air conditioning, and ventilation in motor vehicles (buses, cars, and caravans, recreational boats, etc.), at air intakes for engines and compressors, in pellet and plastic dryers, in blow molding machines, etc. Other diameters ranging from 15 to 800 mm available on special order. The flame-retardant version P2SP SE complies with the requirements of DIN 4102 B1 for building materials. Hose material: polyester fabric impregnated with black TPE (thermoplastic elastomer). Wall thickness: 0.4 mm. Reinforcement: steel wire spiral. Operating temperature: from -40°C to +150°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong and flexible suction and discharge hose made entirely of abrasion-resistant polyurethane with high resistance to fats and oils. The hose is phthalate-free and can be used in the food industry for the transfer of liquid and dry food substances. This includes: - in particular, food fats and oils, e.g., olive oil (simulant D2; up to +40°C and 30 min); - milk and its derivatives, dairy beverages (simulant D1, up to +40°C and 30 min); - hydrated, acidic food, alcohol up to 20%, and dry food (simulants A, B, C, E; up to +70°C and 1 h). In applications not involving direct contact with food (in industry, construction, agriculture), it can be used for water, light chemicals, and other fat-based liquids as well as industrial oils (chemical resistance must be considered). Also used for air, vacuum transfer of dust, powders, granules, and other abrasive bulk materials (abrasiveness and potential static electricity issues must be considered). The very smooth inner surface reduces transmission losses and ensures ease of cleaning. The transparent wall allows for visual flow monitoring. Reinforcement with a dense steel wire spiral provides very good resistance to vacuum and hose collapse. The construction of the hose from polyurethane compared to similar PVC hoses results in significantly greater abrasion resistance, higher strength (working pressure and vacuum), and a wider temperature range with slightly less flexibility. The ARMORVIN TOTAL PU OIL TPHF hose complies with European regulations 1935/2004/EC, 1895/2005/EC, and 10/2011/EU (simulants A, B, C, D1, D2, E), 2023/2006/EC (GMP), and American FDA 21 CFR 177.2600 (d). Suitable for temporary contact with food during the transfer of food substances - under the conditions specified in the manufacturer's declaration of conformity (available from Tubes International). Hose material: transparent polyurethane. Reinforcement: galvanized steel spiral. Working pressure for a temperature of 20°C: from 3 bar to 7 bar - depending on the hose diameter. Operating temperature: from -40°C to +90°C, medium temperature, working pressure dependent on temperature. As the operating temperature increases, the working pressure value of the hose decreases.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe HYPERLINE V (VISIFLON) hose is made of high-quality spiral corrugated PTFE, providing exceptional flexibility, elasticity, and vibration resistance among Teflon hoses. Like any Teflon hose, due to the unique properties of PTFE (wide operating temperature range, resistance to most substances and chemical compounds, minimal surface adhesion), the VISIFLON hose is perfectly suited for the transfer of chemicals, foodstuffs, fuels, oils, paints, solvents, adhesives, dyes, detergents, steam, etc. In cases where there is a risk of static electricity (danger of charge generation and accumulation), VISIFLON hoses made of antistatic Teflon – the antistatic version AS – should be used. Antistatic Teflon is black (contains appropriately distributed graphite in PTFE) and has a resistance of R<108Ω (according to ISO 8031 annex A). This ensures the dissipation and dispersion of electric charges. The selection of the hose in the standard version made of natural PTFE or in the antistatic version should be confirmed with Tubes International. The SS version braid is made of annealed AISI 304 stainless steel wire and provides high pressure resistance. At operating temperatures above +130°C, the maximum working pressure should be reduced by 1% for every 1°C increase in temperature. Available versions of the inner layer: standard (natural white) and antistatic (black). Hose material: spiral corrugated PTFE (Teflon). Reinforcement: AISI 304 steel braid. Working pressure: from 20 bar to 60 bar - depending on the hose diameter. Operating temperature: from -70°C to +230°C. Resistant to full vacuum up to a temperature of: +130°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery flexible and lightweight suction and discharge hose intended for water, juices, beverages, and alcohols with a concentration of up to 20%, as well as other food products. Not suitable for fatty substances such as milk or oils. Resistant to vacuum and collapsing due to the embedded steel wire spiral in the hose wall. A significant advantage is its transparent wall resistant to UV radiation, allowing for easy visual monitoring of media flow, as well as the smoothness of its inner part reducing flow losses and ensuring ease of cleaning. Compared to the ARMORVIN HNA hose, it features higher working pressure and greater resistance to vacuum. In applications not involving direct contact with food (in industry, construction, agriculture), it can be used: 1) for light chemicals, water, sludges, and wastewater, other liquids (without fats, oils, and hydrocarbons); 2) for air, vacuum transfer of dust, powders, granules, and other lightly abrasive bulk substances (non-fatty). Abrasiveness and potential static electricity issues should be considered. As a hose reinforced with a steel spiral (without a braid), it exhibits some elongation under pressure, which should be taken into account in applications, especially at elevated temperatures. Standards and requirements: Food industry, contact with food: compliant with European requirements 1935/2004/EC and 10/2011/EU (simulant fluids A, B, and C), 2023/2006/EC (GMP). Hose material: light green transparent PVC. Reinforcement: galvanized steel spiral. Working pressure: from 2 bar to 8 bar, depending on the hose diameter. Operating temperature: from -5°C to +65°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong, flexible medium-thickness hose designed for the removal of dust, wood shavings, chips, bulk materials, granules, etc. Suitable for all types of industry, particularly commonly used for the removal of chips and other solid particles in the woodworking, furniture, ceramics, and plastics industries. The dense reinforcing spiral provides greater resistance to vacuum compared to ECO 0.4 and ECO 0.6 hoses. Flexible, less compressible, smooth inside, and elastic - even at low temperatures. Good abrasion resistance, also resistant to microbes and hydrolysis. Non-toxic, free from halogen compounds and plasticizers. Resistant to oils and gasoline. The hose is marked with an arrow indicating the correct direction of medium flow. The wall thickness of the hose is measured between the spiral. Installation on couplings with bridge clamps (right-handed). Other diameters may be available upon special request. The hose is available in the following versions: ECO – standard version, ECO SE – flame-retardant material version (UL94 V-2), ECO AS – permanently antistatic version ISO 8031: R <109 Ω, TRGS 727 (6.4.2.4): R <2.5 x 108 Ωm, directive 2014/34/EU (ATEX): can be used in specific explosion hazard zones after risk analysis, ECO SE AS – antistatic and flame-retardant version (available on special request). The ECO hose is produced in a manufacturing process compliant with sustainable development policies, using raw materials from recycled clean production waste, renewable energy, closed water circulation, and other innovations. Hose material: transparent polyester-polyurethane. Reinforcement: steel wire spiral. Wall thickness measured between the spiral: 0.7 mm. Operating temperature: from -40°C to +100°C (temporarily up to +125°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCreamy-beige flexible hose, odorless and tasteless, non-toxic. Resistant to temperatures ranging from -60°C to +135°C. Extremely flexible, elastic, with high fatigue resistance to deformation, abrasion-resistant. Excellent for use in peristaltic pumps. Used for dispensing and portioning cold and hot food products, for soap, detergents, and disinfectants, for paints and toners, pesticides and fertilizers, as well as in laboratories. The soft hose material (61° Shore-A) is highly flexible and provides excellent longevity of up to 1000 hours of operation in a peristaltic pump. The hose is an alternative to commonly used PVC or silicone hoses. It has good chemical resistance to a range of chemicals, particularly acids and bases, oxidizing agents such as hydrogen peroxide, sodium hypochlorite, or ozone. Resistant to a variety of animal and vegetable fats. Not recommended for hydrocarbons. Resistant to aging and UV radiation. Meets FDA 21 CFR 177.2600 requirements for food contact. Multiple sterilization possible with steam in autoclaves, CIP and SIP cleaning in the installation, ethylene oxide, or radiation methods. Full hose roll length: 15 m. Material: TPE (Norprene® – thermoplastic elastomer). Maximum operating temperature: up to +135°C. Brittleness temperature: -60°C. Hardness: 61° Shore (A). Density: 0.98 g/cm³. Note: Product packaged in the Clean Room of Tubes International (CLEAN ROOM) adhering to strict standards. Return of the product after opening the packaging is not possible.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-quality suction and pressure hose "FULL OHM" completely antistatic (Ω/T), designed for the transfer of highly flammable and chemically aggressive substances. The inner layer is made of perfluoroalkoxy polymer PFA (fluoropolymer with properties similar to Teflon), antistatic (R<106 Ω), mirror-smooth, meeting high hygiene requirements (FDA, USP, European EU). Intermediate layers made of synthetic rubber, reinforced with synthetic cord and a steel wire spiral. The outer layer is MARBLE type (marbled), smooth, coated with polyethylene (UPE), antistatic (R<106 Ω), meeting FDA requirements, odorless and tasteless, resistant to abrasion, ozone and aging, chemicals, and short-term action of aggressive acids. An advantage of the MARBLE layer is its low friction coefficient - the hose glides and does not soil the surfaces it contacts, making it easy to clean. Excellent chemical resistance of PFA and antistatic properties of both the inner and outer layers (R<106 Ω) as well as across the wall of the hose (R<109 Ω) make the hose a costly but technically ideal solution for applications requiring the highest safety in all explosion hazard zones (ATEX). Used in the chemical, petrochemical, pharmaceutical, and cosmetic industries, as well as in biotechnology. Not intended for sterilization in an autoclave. A version with additional built-in copper wires (M/T) is available on special order. Standards and requirements: Chemical hoses: EN 12115:2011. Food industry, contact with food: 1935/2004/EC, 2023/2006/EC (GMP); inner layer: 10/2011/EU, USP Class VI, FDA 21 CFR 177.1550; ISO 10993-4,-10,-11, non-cytotoxic (ISO 10993 Part 5); outer layer: FDA 21 CFR 177.1520. Contains no plasticizers, phthalates, or animal-derived substances. Explosive atmospheres: ATEX Directive (zones: 0, 1, 2, 20, 21, 22), EN 50014/IEC 60079-0. Confirmation of resistance and application conditions requires contact with Tubes International. Assembly: Use smooth fittings with a spigot ("tail" for the hose) that do not have sharp or high ribs that could cut or damage the inner layer of PFA when tightened. The diameter of the spigot should be precisely matched to the diameter of the hose to ensure tightness. Assembly with clamp sleeves or shell clamps. Inner layer: black PFA polymer. Reinforcement: synthetic cord, steel spiral. Outer layer: white-black UPE polyethylene, synthetic rubber. Working pressure: 10 bar. Vacuum: 0.9 bar. Operating temperature: from -35°C to +130°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-quality suction and discharge hose designed for the transfer of wine, beer, fruit juices, and other food substances free of fats, requiring the use of odorless and tasteless rubber. It is free from phthalates and bisphenol A. Designed for high-class wines and spirits, for use in breweries and distilleries. Widely used in the spirits industry for the transfer of strong alcohols with concentrations up to 96%. It features copper wires that ensure electrical continuity between the hose ends, enhancing the safety of transferring high-proof, flammable alcohol (ensure contact of the wire with the end during installation). The outer layer is resistant to abrasion, aging, and weather conditions. Standards and requirements: Food industry, food contact 1935/2004/EC, 2023/2006/EC (GMP). Inner layer compliant with FDA 21 CFR 177.2600, BfR XXI cat.2, D.M. 21/03/73. Inner layer: white butyl rubber (IIR). Reinforcement: synthetic cord, steel spiral. Outer layer: red butyl rubber (IIR). Working pressure: 10 bar. Vacuum: 0.9 bar. Operating temperature: from -40°C to +120°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery lightweight and flexible suction and discharge hose for agriculture, food industry, and general applications. Designed for water, light chemicals, sludges and wastewater, plant protection products, and other liquids (excluding fats, oils, and hydrocarbons). Also suitable for air, vacuum transfer of dust, powders, granules, and other lightly abrasive bulk materials (non-greasy). Abrasiveness and potential static electricity issues should be considered. In the food industry, it can be used for the transfer of hydrated food, acidic substances, and alcohols up to 20%, e.g., juices, beverages, beer, wine (simulants A, B, C; up to +40°C). Not recommended for milk and its derivatives or food substances containing fats and oils. Reinforced with a hard PVC spiral, resistant to impact, ensuring good vacuum resistance and preventing hose collapse. The outer surface is corrugated, while the inside is smooth. The AGROFLEX LD hose complies with European regulations 1935/2004/EC, 10/2011/EU (simulants A, B, C), 2023/2006/EC (GMP). Suitable for temporary contact with food during the transfer of food substances - under conditions specified in the manufacturer's declaration of conformity (available from Tubes International). Hose material: green transparent PVC. Reinforcement: white spiral made of hard PVC. Working pressure at 20°C: from 2 bar to 6 bar. As the operating temperature increases, the working pressure value of the hose decreases. Operating temperature: from -10°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCreamy, flexible chemical hose with a multi-layer construction designed specifically to combine chemical resistance with high longevity in peristaltic pumps. Smooth inner layer with very good chemical resistance, free of plasticizers, resistant to acids, bases, salts, alcohols, and ketones, with low absorption and adsorption of water-based fluids. Outer layer made of thermoplastic elastomer (Norprene®) provides excellent properties and high longevity when used in peristaltic pumps. The hose meets hygiene requirements and is suitable for food contact: US FDA 21 CFR 177.1520 and is resistant to most cleaning and disinfecting agents. Sterilization by steam, ethylene oxide, or radiation. Ideal for dosing soap and detergents, laundry detergents, and dishwashing liquids. Used for the production and dosing of various chemicals in all sectors of industry. Full hose roll length is 15 m. The specified working pressure is defined relative to the burst pressure with a safety factor of 1:5. Material: polyolefin / TPE (Norprene® - thermoplastic elastomer). Operating temperature: from -60°C to +74°C. Brittleness temperature: -60°C. Hardness: 61° Shore (A). Density: 0.98 g/cm³. Note: Product packaged in the Clean Room of Tubes International (CLEAN ROOM) adhering to strict standards. Return of the product after opening the packaging is not possible.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, very flexible and elastic hose designed for the extraction of hot vapors, smoke, gases, blowing, and the discharge of cooling air. Reinforced version of the SILICONE 1 hose, featuring two layers of fabric coated with silicone and a steel spiral placed between the layers. Chemically resistant, UV resistant, and aging resistant. Used, among others, for gas extraction in the metallurgical industry, foundries, glass and ceramic industries, for hot air in industrial dryers, in printing houses and paper mills, in vehicles and engines for cooling air, incinerators, as well as for the extraction of exhaust gases and welding fumes. Smooth inside (when straightened), with a very small bending radius allowing easy installation in tight spaces of equipment and vehicles. Not recommended for continuous dynamic bending. Installation with clamps. Other diameters and lengths, soft ends of sections, etc., available on special order. Hose material: two layers of glass fabric coated with red silicone. Reinforcement: steel wire spiral, double external fiberglass cord. Operating temperature: from -70°C to +250°C (temporarily up to +300°C).
