Our products
Select options This product has multiple variants. The options may be chosen on the product page / Details90° DN 9 quick coupling socket with hose end, with or without valve. Widely used in the industry for cooling injection molds and casting parts made of plastics, aluminum, brass, and zinc alloys. Can be used for water in cleaning machines, hot oil, and steam. Flow diameter: 9 mm. Working pressure: 15 bar. Operating temperature: from -20°C to +200°C (viton). Material: brass (socket body, connection, valve sleeve), stainless steel (spring, ring, balls).- Select options This product has multiple variants. The options may be chosen on the product page / DetailsGROMELLE quick coupling socket with BSP, NPT, and shut-off valve, series W-6000. The screw quick coupling is designed for applications with high mechanical loads. Screwing the quick coupling under residual pressure up to 30 bar is permitted. In the case of pulsating pressure at the disconnected joint, the maximum working pressure should be reduced by 50%. Manufactured in accordance with the PED directive 2014/68/EU. Material: galvanized steel. Sealing: NBR (operating temperature: from -20°C to +100°C), viton (operating temperature: from -20°C to +200°C). Working pressure: up to 1100 bar (depending on the size of the quick coupling). Flow has been provided for a pressure drop of 3 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsM9X clamping sleeve for rubber hydraulic hoses type 4SP, R12 or 4SH. Installation - external machining. Diameter D1 [mm] - outer diameter. Diameter D3 [mm] - locking diameter. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-pressure adaptor JIS type A401 with external BSP threads (sealing inverted cone 60°) - TOYOTA. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdapter for spherical end and wing nut. Made of stainless steel, it features a special polymer or copper insert on the conical surface that interacts with the spherical sealing surface of the end. It is tightened to the spherical end using a wing nut. This creates a tight connection resistant to steam and high temperature, which is also easy to unscrew and screw without the use of tools. The thread of the wing nut has a different (larger) size than the internal thread of the GFB adapter. The GFB adapter is a typical component of a complete steam end with an internal thread. The use of the adapter allows for the creation of various connections, depending on the components used in the installation. Material: stainless steel AISI 316. Working pressure: 18 bar (+210°C) - saturated steam. Operating temperature: up to +230°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDYROS series 6 quick coupling socket with internal thread and shut-off valve. Available with metric or BSP thread. Designed for cooling liquids in plastic processing, compressed air installations, gas cylinders, and other technical fields. Material: all components are made of brass, while the retaining rings, springs, and balls are made of treated stainless steel. Sealing: viton. Working pressure: 15 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic end (type Z - with a regular hydraulic "tail" for the hose), with internal UNF thread and nut, flat sealing (ORFS). Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the hose type. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsGROMELLE quick coupling plug with BSP, NPT thread and shut-off valve, series W-6000. The screw-type quick coupling is designed for applications with high mechanical loads. It is permissible to screw the quick coupling under residual pressure up to 30 bar. In the case of pulsating pressure with the coupling disconnected, the maximum working pressure should be reduced by 50%. Manufactured in accordance with the PED directive 2014/68/EU. Material: galvanized steel. Sealing: NBR (operating temperature: from -20°C to +100°C), viton (operating temperature: from -20°C to +200°C). Working pressure: up to 1100 bar (depending on the size of the quick coupling). Flow has been provided for a pressure drop of 3 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdapter for spherical end and wing nut. It has a conical surface that works with the spherical sealing surface of the end. It is tightened to the spherical end using a wing nut. This creates a tight connection resistant to steam and high temperature, which is also easy to unscrew and screw without the use of tools. The thread of the wing nut has a different (larger) size than the internal thread of the GFB adapter. The GFB adapter is a typical part of a complete steam end with an internal thread. The use of the adapter allows for the creation of various connections, depending on the components used in the installation. Material: brass. Working pressure: 18 bar (+210°C) - saturated steam. Operating temperature: up to +230°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-pressure adaptor type A105 with internal BSP threads, featuring a swivel nut (60° cone seal). Material: AISI 316L steel.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° socket DN 6 quick coupling with "tail" for PUSH-ON hose, with or without valve, widely used in the industry for cooling injection molds and casting parts made of plastics, aluminum, brass, and zinc alloys. It can be used for water in cleaning machines, hot oil, and steam. Flow diameter: 6 mm. Working pressure: 25 bar. Operating temperature: from -20°C to +200°C (viton). Material: brass (socket body, connection, valve sleeve), stainless steel (spring, ring, balls).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick coupling socket GROMELLE series H-5000 with internal BSP and metric thread. Designed and manufactured in accordance with the PED directive 2014/68/EU. Intended for applications with high working pressure, pressure impulses, mechanical loads, and frequent connecting and disconnecting. Application: hydraulic power (hydraulic oil), industrial (water, steam, fuels and oils, gases, chemicals). In the case of pulsating pressure at the disconnected coupling, the maximum working pressure should be reduced by 50%. Material: galvanized steel. Socket sealing: NBR (operating temperature from -20°C to +100°C), above size 1" viton (from -20°C to +200°C). Working pressure: up to 1000 bar (depending on the size of the quick coupling), safety factor 3:1. Flow has been provided for a pressure drop of 3 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° high-pressure adapter type A305 with external NPT threads (thread seal). Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsNPT internal threaded ends for rubber hoses for steam, with a ribbed tail for the hose, with a lock – for installation in the hose using BOSS SBC type steam clamps. The complete end consists of three parts – a spherical end GB with a spout ("tail") for the hose, a wing nut B with a special internal thread (NPS), and a special adapter GFB with an external thread (NPS) matching the nut and an internal thread of the same size as the end. The GFB adapter has a conical polymer or copper insert that works with the spherical end. This creates a tight, steam-resistant, and high-temperature connection that is also easy to unscrew and screw without the use of special tools, using the wing nut. Material: brass. Working pressure: 18 bar (+210°C) - saturated steam. Operating temperature: up to +230°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic end (type Z - with a regular hydraulic "tail" for the hose), with internal UNF thread and nut, sealing on a 74° cone (DKJ). Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the type of hose. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDouble plug quick coupling DYROS series 6. Designed for cooling liquids in plastic processing, compressed air installations, gas cylinder applications, and other technical fields. Material: brass. Working pressure: 15 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBlind plug for ISO-A quick connector socket protecting the connection from contamination, which may result in damage to components and the ingress of impurities into the system. Material: PVC. Color: red.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdaptor, 90° elbow high-pressure type A206, with external BSP thread (60° cone seal) and external NPT thread (thread seal). Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdapter for spherical end and wing nut. Made of galvanized steel, it features a special polymer or copper insert on the conical surface that interacts with the spherical sealing surface of the end. It is tightened to the spherical end using a wing nut. This creates a tight connection resistant to steam and high temperature, which is also easy to unscrew and screw without the use of tools. The GDB adapter, double-sided screwed with a wing nut, can connect two hoses with GF ends. Material: galvanized steel. Working pressure: 18 bar (+210°C) - saturated steam. Operating temperature: up to +230°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic end (type Z - with a regular hydraulic "tail" for hose), with internal BSP thread and nut, 60° sealing cone (DKR), 90° angled. Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the hose type. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsISO-A hydraulic quick coupling with shut-off valve and external metric thread. Application: power hydraulics (hydraulic oil). The quick coupling is mainly used in agricultural machinery. Commonly referred to as "euro couplings." Interchangeable with ISO-A quick couplings from other manufacturers. Material: galvanized steel. Seal of the coupling: NBR. Operating temperature: from -25°C to +100°C. Working pressure: up to 250 bar. Safety factor 4:1. Flow rate is given at Δp = 3 bar [l/min].
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-pressure adaptor JIS type A503 with external metric thread (60° inverted cone seal) - KOMATSU and with external BSPT thread (thread seal). Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDN 9 quick coupling socket with external BSP and metric thread (seal on a 60° cone), with or without valve. Widely used in the industry for cooling injection molds and casting parts made of plastics, aluminum, brass, and zinc alloys. Can be used for water in cleaning machines, hot oil, and steam. Flow diameter: 9 mm. Working pressure: 25 bar. Operating temperature: from -20°C to +200°C (Viton). Material: brass (socket body, connection, valve sleeve), stainless steel (spring, ring, balls).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic end fitting (type Z - with a regular hydraulic "tail" for the hose), with internal BSP thread and nut, flat sealing - requires the use of an additional flat gasket (DKR-F). Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the type of hose. Material: AISI 316L steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFSS end with a rotating flange, for rubber hoses for steam, with a corrugated tail for the hose, with a lock – for installation in the hose using shell clamps for steam (EN 14423, DIN 2826, sizes 1/2” to 2”). Flange according to European standards (EN 10092-1) PN40 and PN16 and according to American standards ASA (ASME) 150 PSI and 300 PSI. Material: stainless steel AISI 316, galvanized steel. Working pressure: 18 bar (+210°C) for saturated steam and according to the working pressure of the respective flange class at this temperature; for other applications according to the working pressure for the respective flange class (e.g., PN40) - selection in contact with Tubes International.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsTEMA STANDARD quick coupling plug (NORDIC RANGE) with shut-off valve and internal thread BSP, NPT. Designed for heavy-duty working conditions. For pulsating pressure, the maximum working pressure should be reduced by 50%. Application: hydraulic power (hydraulic oil), industrial (water, steam, fuels and oils, gases and chemicals). Material: stainless steel AISI 316. Working pressure: up to 300 bar (depending on diameter). Safety factor 4:1. Sealing: viton, NBR. Operating temperature: from -20°C to +200°C - viton, from -30°C to +100°C - NBR. Flow has been provided for a pressure drop of 3 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-pressure adaptor type A603 with external BSP threads (60° cone sealing) and internal metric threads (thread sealing). Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° socket DN 6 quick coupling with "tail" for hose, with or without valve, widely used in the industry for cooling injection molds and casting parts made of plastics, aluminum, brass, and zinc alloys. It can be used for water in cleaning machines, hot oil, and steam. Flow diameter: 6 mm. Working pressure: 25 bar. Operating temperature: from -20°C to +200°C (viton). Material: brass (socket body, connection, valve sleeve), stainless steel (spring, ring, balls).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFSS end with a fixed flange, for rubber hoses for steam, with a corrugated tail for the hose, with a lock – for installation in the hose using shell clamps for steam (EN 14423, DIN 2826, sizes 1/2” to 2”). Flange according to European standards (EN 10092-1) PN40 and PN16 and according to American standards ASA (ASME) 150 PSI and 300 PSI. Material: stainless steel AISI 316. Working pressure: 18 bar (+210°C) for saturated steam and according to the working pressure of the respective flange class at this temperature; for other applications according to the working pressure for the respective flange class (e.g., PN40) - selection in contact with Tubes International.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick coupling plug type TC designed for use in hydraulic systems of heavy-duty trucks and dump trucks. The plug sleeve is equipped with butterfly handles and allows for quick and easy connection and disconnection of the quick coupling without the need for tools. Coupling under residual pressure is permitted up to a maximum of 50 bar (static pressure remaining in the system after the drive is turned off). Application: hydraulic power (hydraulic oil). Material: galvanized steel. Sealing: NBR. Operating temperature: from -40°C to +106°C. Working pressure: up to 350 bar (depending on size). Safety factor 3:1. Flow rate is specified for a pressure drop of 3 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMC-BP7 clamping sleeve for thermoplastic hoses type R7 and hydraulic hoses type 1SC. Installation - no machining. Diameter D1 [mm] - outer diameter. Diameter D2 [mm] - inner diameter. Diameter D3 [mm] - lock diameter. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-pressure adaptor type A601 with external BSP threads (60° cone seal) and external metric threads (60° cone seal). Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFSS end with a swivel flange, for rubber hoses for steam, with a corrugated tail for the hose, with a lock – for installation in the hose using shell clamps for steam (EN 14423, DIN 2826, sizes 1/2” to 2”). Flange according to European standards (EN 10092-1) PN40 and PN16 and according to American standards ASA (ASME) 150 PSI and 300 PSI. Material: galvanized steel. Working pressure: 18 bar (+210°C) for saturated steam and according to the working pressure of the respective flange class at this temperature; for other applications according to the working pressure for the respective flange class (e.g., PN40) - selection in contact with Tubes International.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard type Z connector designed for connecting rubber hydraulic hoses. For crimping with a crimping sleeve. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDN 13 quick coupling plug with external BSP and metric thread, with or without valve, widely used in the industry for cooling injection molds and casting parts made of plastics, aluminum, brass, and zinc alloys. It can be used for water in cleaning machines, hot oil, and steam. Flow diameter: 13 mm. Working pressure: 25 bar. Operating temperature: from -20°C to +200°C (viton). Material: brass (plug body, valve), stainless steel (spring).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsISO-A hydraulic quick coupling with shut-off valve and internal BSP thread. Application: power hydraulics (hydraulic oil). The quick coupling is mainly used in agricultural machinery. Commonly referred to as "euro couplings." Interchangeable with ISO-A quick couplings from other manufacturers. Material: galvanized steel. Seal of the coupling: NBR. Operating temperature: from -20°C to +100°C. Working pressure: up to 350 bar (depending on the size of the quick coupling). Safety factor 4:1. Flow is specified for a pressure drop of 3 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° high-pressure adapter type A307 with external NPT thread (thread seal) and internal NPT thread (thread seal). Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDN 9 quick coupling socket with internal BSP and NPT thread, with or without valve, widely used in the industry for cooling injection molds and casting parts made of plastics, aluminum, brass, and zinc alloys. It can be used for water in cleaning machines, hot oil, and steam. Flow diameter: 9 mm. Working pressure: 15 bar. Operating temperature: from -20°C to +200°C (Viton). Material: brass (socket body, connection, valve sleeve), stainless steel (spring, ring, balls).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsInternal thread BSP and NPT fittings for rubber hoses for steam, with a ribbed tail for the hose, with a lock – for installation in the hose using BOSS SBC type steam clamps. The complete fitting consists of three parts – a spherical end GB with a spigot (“tail”) for the hose, a wing nut B with a special internal thread (NPS), and a special adapter GFB with an external thread (NPS) matching the nut and an internal thread of the same size as the fitting. The GFB adapter has a conical polymer or copper insert, working with the spherical end. This creates a tight, steam-resistant, and high-temperature connection that is also easy to unscrew and screw without the use of special tools, using the wing nut. Due to the reduced design of the lock (flange) of the 2” fitting, BOSS SBC 2” steam clamps with 4 claws should not be used. Material: stainless steel AISI 316. Working pressure: 18 bar (+210°C) - saturated steam. Operating temperature: up to +230°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic end fitting (type Z - with a regular hydraulic "tail" for hose), with internal metric thread and nut, sealing with an O-ring on a 24° cone (DKOL), angled 45°, lightweight series. Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the hose type. Material: carbon steel, galvanized.
