Our products
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick coupling socket DYROS series 90 with hose end and shut-off valve. Designed for cooling liquids in plastic processing, compressed air installations, gas cylinder applications, and other technical fields. Material: all components made of brass, while retaining rings, springs, and balls are made of treated stainless steel. Sealing: viton. Working pressure: 15 bar.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsY-branch with internal BSP thread for use in industrial installations, e.g., for air. Material: brass. Working pressure: up to 35 bar. Operating temperature: up to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLip seal designed for suction and pressure hoses. Not suitable for food applications. Lacks resistance to greases and oils. Material: EPDM. Operating temperature: from -35°C to +130°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible hose designed for the transmission of industrial oils, mineral oils, diesel fuel (EN 590:2010), biodiesel, and heating oil (DIN 51 603 1÷5) under higher pressure. Also suitable for compressed air and glycol-based coolants. The inner layer is made of black, smooth NBR rubber, antistatic R<106 Ω/m (EN ISO 8031:2009). Reinforcement with durable textile braid provides a safety factor of 4:1. Resistant to slight vacuum up to approximately 0.6 bar. The outer layer is made of black, smooth SBR/NVC rubber (NVC - a blend of NBR and PVC) and is resistant to oil, ozone, and weather conditions. Inner layer: black NBR rubber. Reinforcement: polyester braid. Outer layer: black SBR/NVC rubber. Working pressure: 40 bar. Operating temperature: from -45°C to +100°C for fuels and oils, from -45°C to +70°C for air.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick-coupling plug SNAP-TITE with a BSP female thread American-made, without a valve. Application: power hydraulics (hydraulic oil), industrial (water, steam, fuels and oils, gases and chemicals). Depending on the application, the appropriate coupling and seal material should be selected. Standard: MIL-C-51234. Working pressure: up to 155 bar (depending on the quick-coupling size), Safety factor 2:1. Material: brass. Sealing: NBR. Operating temperature: from -35°C to +120°C). The flow is given for a pressure drop of 3 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-pressure adapter type A201 with BSPT male thread (thread sealing) and with NPT male thread (thread sealing). Material: AISI 304.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLeak-free Quick-coupling plug type "flat-face" intended mainly for construction machinery, where large pressure surges occur. The plugs are also available in a version with a static-pressure eliminator. The quick coupling can be operated with one hand. Depending on the application, the appropriate seal material should be selected. interchangeable with quick coupling ISO-F from other manufacturers. Standard: ISO 16028, except for size 3/16". Application: power hydraulics (hydraulic oil), industrial. Material: steel with a zinc-nickel coating, except for size 3/16" coated with a zinc coating. Working pressure: up to 720 bar. Sealing: NBR (from -25°C to +100°C), Viton (from -15°C to +200°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBrass "Y" tee with internal BSP thread. Material: brass. Working pressure: up to 63 bar. Operating temperature: from -10°C to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlat gasket intended for connections with internal threads. Limited resistance to greases and oils. Material: white NBR rubber. Operating temperature: from -40°C to +110°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSoft, flexible, extruded suction hose for the transfer of gasoline and diesel fuel at low pressure, fire-resistant, for small vessels - recreational boats up to 24 m in length. Designed for fuel installations of stationary engines on ships, motorboats, yachts, etc. Suitable for unleaded gasoline, gasoline with up to 10% ethanol (E10 gasoline), diesel fuel, and diesel fuel with 10% FAME esters (B10 - biodiesel). Compliant with ISO 7840 type A1 (fire-resistant, fuel vapor permeability less than or equal to 100 g/m²/24 h), compliant with directive 94/25/EC, certified by RINA, compliant with SAE 1527, USCG type A1. Inner layer made of black, seamless synthetic rubber, resistant to oils and fuels with up to 50% aromatic hydrocarbon content. Reinforcement with synthetic textile braid. Outer layer made of black, fire-resistant, seamless synthetic rubber, resistant to aging, lubricants, weather conditions, and temperature (fire resistance: ISO 7840 Annex A: hose filled with fuel should withstand flame for 2.5 min). Inner layer: black synthetic rubber. Reinforcement: synthetic braid. Outer layer: black synthetic rubber. Working pressure: from 2.5 bar to 3.4 bar - depending on hose diameter. Operating temperature: from -20°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDYROS series 90 quick coupling plug with external thread without valve. Available with metric or BSP thread. Designed for cooling liquids in plastic processing, compressed air installations, gas cylinder applications, and other technical fields. Material: brass. Working pressure: 15 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-pressure 90° adapter type A116 with BSPT male thread (thread sealing). Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBrass "T" fitting with external BSP thread. Material: brass. Working pressure: up to 63 bar. Operating temperature: from -10°C to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsGasket intended for pressure hoses. For food applications (for contact with drinking water - indices marked with the number "05" at the end). Material: white NBR rubber. Operating temperature: from -40°C to +110°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery strong fuel transfer hose for aviation fuel, designed for direct pressure refueling of aircraft on the ground. It can also be used in fuel transfer operations in airport tankers – dispensers, in operations not requiring high vacuum. Specifically designed for kerosene (aviation fuel - fuel for turbine aircraft engines, e.g., JET A1), aviation gasoline, and fuels with aromatic hydrocarbon content up to 50%. Can be used on drum reels. Inner layer made of black, smooth, antistatic NBR rubber. Reinforcement with layers of high-strength synthetic cord. Outer layer made of black, antistatic, self-extinguishing chloroprene (CR) rubber, resistant to abrasion, contact with hydrocarbons, and weather conditions. Antistatic outer layer, in accordance with EN ISO 1825 requirements, ensures the required low resistance of the hose between the ends (103 Ω ‹ R ‹ 106 Ω, ISO 8031). Compliant with requirements for aviation fuel hoses (type C/Ω) EN ISO 1825, EN 1361, BS 3158, EI 1529. Inner layer: black NBR rubber. Reinforcement: synthetic cord. Outer layer: black CR rubber. Working pressure: 20 bar. Operating temperature: from -30°C to +70°C (for aviation fuel according to EN 1825).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDN 9 quick coupling plug with external BSP and metric thread, with or without valve, widely used in the industry for cooling injection molds and casting parts made of plastics, aluminum, brass, and zinc alloys. Can be used for water in cleaning machines, hot oil, steam. Flow diameter: 9 mm. Working pressure: 25 bar. Operating temperature: from -20°C to +200°C (viton). Material: brass (plug body, valve), stainless steel (spring).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA seal set for a NORDIC RANGE socket. The set comprises 2 O-rings + a flat gasket; for size 3/16 the seal set consists of 1 O-ring. Material: NBR, Viton. Operating temperature: from -30°C to +100°C - NBR, from -20°C to +200°C - Viton.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-pressure adapter type A303 with NPT male thread (thread sealing) and with NPT female thread (thread sealing). Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsISO-A hydraulic quick-coupling socket with a shut-off valve and a BSP female thread. Application: power hydraulics (hydraulic oil). The quick coupling is used mainly in agricultural machinery. Commonly called "euro couplings". Used interchangeably with quick coupling ISO-A from other manufacturers. Material: galvanized steel. sealing socket: NBR. Operating temperature: from -20°C to +100°C. Working pressure: up to 350 bar (depending on the quick-coupling size). Safety factor 4:1. The flow is given for a pressure drop of 3 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° brass elbow with internal BSP thread. Material: brass. Working pressure: up to 63 bar. Operating temperature: from -10°C to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible, soft rubber hose with an external stainless steel braid, designed for gasoline and petroleum-based oils such as diesel, heating oil, and lubricating oil. Installed in fuel and oil systems of small vehicles and industrial equipment. Can also be used for water, cooling fluids, non-oxidizing detergents, and air. Based on the requirements of standard DIN 73379. Inner layer made of smooth black NBR rubber. The external reinforcing braid made of stainless steel provides high pressure resistance and is corrosion-resistant. Maximum operating temperature depends on the medium: for gasoline, unleaded gasoline, fuels with up to 50% aromatic hydrocarbon content: +40ºC; for diesel: +80ºC; for water and ethylene glycol-based cooling liquids: +90ºC; for air: +80ºC; for liquid, non-oxidizing detergents: +80ºC. Inner layer: black NBR rubber. Reinforcement: external wire braid made of stainless steel AISI 304. Working pressure: from 10 bar to 20 bar - depending on the hose diameter. Operating temperature: from -35°C to +80°C (maximum operating temperature depends on the medium).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDYROS series 90 quick coupling plug with external thread and valve. Available with metric or BSP thread. Designed for cooling liquids in plastic processing, compressed air installations, gas cylinder applications, and other technical fields. Material: brass. Valve sealing: viton. Working pressure: 15 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdapter - tee high-pressure, type A309, with female thread 3 x NPT (thread sealing). Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDN 9 quick coupling socket with internal BSP and metric thread, with or without valve, widely used in the industry for cooling injection molds and casting parts made of plastics, aluminum, brass, and zinc alloys. It can be used for water in cleaning machines, hot oil, and steam. Flow diameter: 9 mm. Working pressure: 25 bar. Operating temperature: from -20°C to +200°C (viton). Material: brass (socket body, connection, valve sleeve), stainless steel (spring, ring, balls).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe TEMA quick-coupling socket with a BSP female thread, compliant with the ISO 16028 standard. The flat-face, leak-free IF series of quick couplings, thanks to the appropriate valve design in the socket and plug, is characterized by a low pressure drop, which ensures maximum economic efficiency. An additional advantage is the ability to operate the socket with one hand. It is equipped with a safety system that prevents accidental disconnection. Application: power hydraulics (hydraulic oil), chemical industry (chemicals). It is also available in a version with a static-pressure eliminator. Interchangeable with ISO 16028 quick couplings from other manufacturers. Working pressure: up to 450 bar (depending on the quick-coupling size). Safety factor: 4:1. The stated working pressure applies to the connected quick coupling. Material: carbon steel, galvanized. Sealing: NBR (from -30°C to +100°C), viton (from -25°C to +200°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong, abrasion-resistant suction hose designed specifically for the transfer of fuels, other liquid hydrocarbons, or for use as a general-purpose antistatic hose. Lighter and more flexible than standard rubber hoses, it has buoyancy (remains on the surface) in fresh and saltwater. Flat when at rest, which facilitates handling and storage. Intended for the transfer and transshipment of petrochemical products, oils, and fuels in refineries, industry, and transportation. Used for fueling ships, cleaning tanks, firefighting, and military applications. Meets the requirements of MIL-PRF-370J for liquid fuel hoses. Antistatic - features two externally longitudinally arranged copper wires ensuring electrical continuity between the hose ends easily accessible for proper connection to fittings (R < 0.02 Ω/m, exceeds the requirements of MIL-PRF-370J). The inner surface of the hose is smooth, causing no flow loss. Resistant to abrasion, weather conditions, hydrolysis, ozone, fuels, and commonly used chemicals (recommended pH range: 5 to 9). Resistant to longitudinal loads during unwinding and dragging. Hose material: polyurethane (PUR) embedded in the braid during the hose extrusion process. Working pressure: from 7 bar to 11 bar - depending on the hose diameter (the specified working pressure for fuel). Operating temperature: from -50°C to +50°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsTee "T" with internal BSP thread for use in piping connections of industrial installations, e.g., for air. Material: brass. Working pressure: up to 10 bar. Operating temperature: up to +100°C.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdapter - cross high-pressure type A125 with male thread 4 x BSP (60° cone sealing). Material: AISI 316L.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdapter - cross high-pressure type A125 with BSP male thread (60° cone sealing). Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdapter - cross high-pressure type A128 with female thread 4 x BSP, with a swivel nut (60° cone sealing). Material: AISI 316.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdapter - cross high-pressure type A128 with female thread 4 x BSP, with swivel nuts (60° cone sealing). Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdapter - cross high-pressure type A312 with female thread 4 x NPT (thread sealing). Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdapter - elbow 90° high-pressure JIS type A505T with metric male thread (inverted 60° cone sealing) - KOMATSU and with BSPT male thread (thread sealing). Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-pressure 90° adapter type A306 with NPT female thread (thread sealing). Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdapter - plug high-pressure type A112A with BSP female thread, with a hexagon head. Material: AISI 316L.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdapter - plug high-pressure type A707 with metric male thread (60° cone sealing), for a hexagon wrench. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdapter - plug with a hexagon head with BSPT male thread. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsNipple bulkhead hydraulic (high-pressure) with a nut, type A107, with BSP male thread (60° cone sealing). Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-pressure adapter type A602 with BSPT male thread (thread sealing) and metric male thread (60° cone sealing). Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-pressure adapter JIS type A502 with metric male thread (inverted 60° cone sealing) - KOMATSU and with BSP male thread (60° cone sealing). Material: carbon steel, galvanized.
