Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic end (type Z - with a regular hydraulic "tail" for hose), with internal UNF thread and nut, sealing on a 74° cone (DKJ), 90° angled. Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the hose type. Material: carbon steel, galvanized.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsISO-A quick connector socket cap protecting the connectors from contamination, which may result in damage to components and the ingress of impurities into the system. Available in colors: red, yellow, green, blue, or black. Material: PE or PVC.
- Select options This product has multiple variants. The options may be chosen on the product page / Details45° quick coupling socket DYROS series 6 with hose end without valve. Designed for cooling liquids in plastic processing, compressed air installations, gas cylinder applications, and other technical fields. Material: all components are made of brass, while the retaining rings, springs, and balls are made of treated stainless steel. Sealing: Viton. Working pressure: 15 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic end fitting (type Z - with a regular hydraulic "tail" for hose), with external metric thread, sealing on a 60° cone (CES), heavy series. Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the type of hose. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHQ WSC quick coupling plug, screw-on, with a valve with internal NPT thread for use in hydraulic vehicle systems. The body made of brass ensures excellent resistance to changing weather conditions. The valve design ensures minimal medium leakage and air inclusion during connection and disconnection. The plug sleeve equipped with butterfly handles allows for very quick and easy connection and disconnection of the quick coupling without the need for tools. It is permissible to screw the quick coupling under residual pressure up to 50 bar (static pressure remaining in the system after the drive is turned off). Material: brass (body), galvanized steel (plug sleeve). Sealing: NBR. Operating temperature: from -40°C to +106°C. Working pressure: up to 210 bar (depending on size). Flow is given for a pressure drop of 3 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsISO-A hydraulic quick coupling socket with shut-off valve, internal BSP thread, and pressure eliminator. Application: power hydraulics (hydraulic oil). The quick coupling is mainly used in agricultural machinery. Commonly referred to as "euro couplings." Interchangeable with ISO-A quick couplings from other manufacturers. Material: galvanized steel. Socket sealing: NBR. Operating temperature from -25°C to +100°C. Working pressure: up to 320 bar. Safety factor 4:1. Flow rate is specified at Δp = 3 bar [l/min].
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic end (type Z - with a regular hydraulic "tail" for hose), with external BSP thread, sealing cone 60° (AGR). Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the type of hose (use sleeves marked additionally with the letters "-PH" at the end of the index). Material: AISI 316 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDYROS series 6 quick coupling plug with hose end without valve. Designed for cooling liquids in plastic processing, compressed air installations, gas cylinder applications, and other technical fields. Material: brass. Working pressure: 15 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / Details45° socket DN 6 quick coupling with "tail" for hose, with or without valve, widely used in the industry for cooling injection molds and casting parts made of plastics, aluminum, brass, and zinc alloys. It can be used for water in cleaning machines, hot oil, and steam. Flow diameter: 6 mm. Working pressure: 25 bar. Operating temperature: from -20°C to +200°C (viton). Material: brass (socket body, connection, valve sleeve), stainless steel (spring, ring, balls).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSAE 6000 flange end (SFL), 90° angled, heavy series. Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the type of hose. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick coupling socket HQ WSC, screw-on, with a valve with internal NPT thread for use in hydraulic systems of vehicles. The body made of brass ensures excellent resistance to changing weather conditions. The valve design ensures minimal medium leakage and air inclusion during connection and disconnection. Screwing the quick coupling under residual pressure up to 50 bar is permitted (static pressure remaining in the system after the drive is turned off). Material: brass. Sealing: NBR. Operating temperature: from -40°C to +106°C. Working pressure: up to 210 bar (depending on size). Flow is specified for a pressure drop of 3 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic end (type Z - with a regular hydraulic "tail" for the hose), with external metric thread, sealing on a 60° cone (CEL), lightweight series. Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the hose type. Surface coated with zinc-nickel with a layer thickness of 6-10 µm, which is characterized by very high corrosion resistance (up to 720 hours without corrosion in a salt spray chamber). Material: carbon steel, zinc-nickel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDN 6 quick coupling plug with external BSPT, NPT, and metric thread, with or without valve, widely used in the industry for cooling injection molds and casting parts made of plastics, aluminum, brass, and zinc alloys. Can be used for water in cleaning machines, hot oil, steam. Flow diameter: 6 mm. Working pressure: 10 bar. Operating temperature: from -20°C to +200°C (viton). Material: brass (plug body, valve), stainless steel (spring).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug cap for HANSEN quick coupling ISO-B standard, protecting connections from contamination that may result in damage to components and the ingress of impurities into the system. Material: PVC.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSAE 6000 split flange with holes for DIN 912 hexagon socket screws; heavy-duty version. Allows for easy installation of flange adapters or hoses (pipes) with flange ends. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDNP PTV1 quick coupling socket with internal BSP threaded valve, for use in hydraulic systems (hydraulic oil) and, thanks to additional sealing in the form of an O-ring, for gas installations. Interchangeable with Tema series T quick couplings. Material: galvanized steel. Socket sealing: NBR. Operating temperature: from -25°C to +100°C. Working pressure: up to 370 bar (depending on the size of the quick coupling).
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° plug DN 6 quick coupling with external tapered BSPT and metric thread (sealing on 60° cone), without valve. Widely used in the industry for cooling injection molds and casting parts made of plastics, aluminum, brass, and zinc alloys. Can be used for water in cleaning machines, hot oil, steam. Flow diameter: 6 mm. Working pressure: 25 bar. Operating temperature: from -20°C to +200°C. Material: brass.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic end (type Z - with a regular hydraulic "tail" for hose), with internal BSP thread and nut, sealing with an O-ring on a 60° cone (DKOR). Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the type of hose. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° quick coupling plug DYROS series 6 with external thread without valve. Available with metric or BSP thread. Designed for cooling liquids for molds in plastic processing, compressed air installations, gas cylinder applications, and other technical fields. Material: brass. Working pressure: 15 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSnap-Tite non-drip quick coupling (1/4" ÷ 1") with internal BSP or NPTF thread, American-made, designed for heavy-duty conditions. They feature the highest working pressure among "flat-face" type quick couplings. The couplings can be operated with one hand. Depending on the application, the appropriate material for the coupling and sealing must be selected. In the case of pulsating pressure, the working pressure should be reduced by 40%. Application: hydraulic power (hydraulic oil), industrial (water, steam, fuels and oils, gases, chemicals). Working pressure: up to 690 bar (depending on the size of the quick coupling). Material: carbon steel, galvanized. Sealing: NBR (from -35°C to +120°C), viton (from -26°C to +204°C), EPR (from -56°C to +120°C). The specified flow at Δp = 3 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsM4X clamp sleeve for rubber hydraulic hoses type 4SH or R12. Installation - external machining. Diameter D1 [mm] - outer diameter. Diameter D3 [mm] - lock diameter. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDYROS series 90 quick coupling plug with internal BSP thread without valve. Designed for cooling liquids in plastic processing, compressed air installations, gas cylinder applications, and other technical fields. Material: brass. Working pressure: 15 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug for a quick-connect socket with a chain, type TC, protecting against contamination and damage. Material: galvanized carbon steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic end fitting (type Z - with a regular hydraulic "tail" for hose), with internal BSP thread and nut, 60° sealing cone (DKR). Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the type of hose (use sleeves additionally marked with the letters "-PH" at the end of the index). Material: AISI 316 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsISO-A hydraulic quick coupling plug with shut-off valve and external metric thread, version for panel mounting. Application: power hydraulics (hydraulic oil). The quick coupling is mainly used in agricultural machinery. Commonly referred to as "euro couplings." Interchangeable with ISO-A quick couplings from other manufacturers. Material: galvanized steel. Sealing: NBR (operating temperature from -25°C to +100°C). Working pressure: up to 250 bar. Safety factor 4:1. Flow rate is given at Δp = 3 bar [l/min].
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDYROS series 40 quick coupling socket with external thread and shut-off valve. Available with metric or BSP thread. Designed for cooling liquids in plastic processing, compressed air systems, gas cylinders, and other technical fields. Material: all components are made of brass, while retaining rings, springs, and balls are made of treated stainless steel. Seals: viton. Working pressure: 15 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsNitto Kohki HI CUPLA series socket with a hose end, featuring excellent durability and vibration resistance. Designed for connecting pneumatic tools to the air supply system. Material: AISI 304 steel. Working pressure: 15 bar. Operating temperature: from -20°C to +80°C (NBR). Flow rate: 4000 l/min (1″), 3200 l/min (3/4″), 2600 l/min (1/2″), 1600 l/min (3/8″), 1000 l/min (1/4″) at a pressure of 5 bar. Note: the medium must flow from the socket to the plug.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic end (type Z – with a regular hydraulic "tail" for hose), with internal UNF thread and nut, flat sealing (ORFS), 45° angle. Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the hose type. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHANSEN type HK quick coupling with internal NPT and BSP thread. Can be used interchangeably with ISO-B quick couplings from other manufacturers, made to ISO 7241-1 B standard. Designed and manufactured in accordance with the PED directive 2014/68/EU. Application in hydraulic power for hydraulic oil, in industry for water, steam, fuels, oils, gases, and chemicals. Material: AISI 316 steel. Sealing: NBR (operating temperature from -40°C to +121°C), EPDM (operating temperature from -54°C to +149°C), viton (operating temperature from -29°C to +204°C). Working pressure: up to 344 bar (depending on the size of the quick coupling). Flow has been provided for a pressure drop of 3 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSplit flange SAE 3000 with holes for DIN 912 hexagon socket screws, class 12.9; lightweight version. Enables easy installation of flange adapters or hoses (pipes) with flange ends. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFull-flow quick coupling plug Nitto Kohki series TSP CUPLA with external BSPT thread, featuring excellent durability, designed for water, hydraulic oils, steam, chemicals, air, and gases. Particularly recommended for high-viscosity fluids such as lubricants. Material: AISI 304 steel. Working pressure: 75 bar (1/8", 1/4", 3/8"), 45 bar (1/2", 3/4", 1"), 30 bar (1.1/4", 1.1/2"), 20 bar (2"). Operating temperature: from -20°C to +80°C (NBR).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug cap for HOLMBURY quick coupling (NORDIC INTERCHANGE), protecting connections from contamination that may result in damage to components and the ingress of impurities into the system. Material: PVC.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic end (type Z - with a regular hydraulic "tail" for hose), with external tapered NPT thread, sealing on the thread (AGN), possible sealing on a 60° cone. Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the hose type. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsISO-A hydraulic quick coupling socket with shut-off valve and external metric thread. "Push-pull" version - automatic disconnection upon accidental tensioning of the hose. Application: power hydraulics (hydraulic oil). The quick coupling is mainly used in agricultural machinery. Commonly referred to as "euro couplings." Interchangeable with ISO-A quick couplings from other manufacturers. Material: galvanized steel. Sealing: NBR. Operating temperature range: -25°C to +100°C. Working pressure: 250 bar. Safety factor 4:1. Flow rate is specified for a pressure drop of 3 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFull-flow quick coupling socket Nitto Kohki series TSP CUPLA with hose end of excellent durability, intended for water, hydraulic oils, steam, chemicals, air, and gases. Particularly recommended for high-viscosity fluids such as lubricants. Material: AISI 304 steel. Working pressure: 75 bar (1/8", 1/4", 3/8"), 45 bar (1/2", 3/4", 1"), 30 bar (1.1/4", 1.1/2"), 20 bar (2"). Operating temperature: from -20°C to +80°C (NBR).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic end (type Z - with a regular hydraulic "tail" for the hose), with external UNF thread, sealing on a 74° cone (AGJ). Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the type of hose. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic end (type Z - with a regular hydraulic "tail" for the hose), with external BSP thread, flat sealing - requires the use of an additional flat gasket (AGR-F). Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the type of hose. Material: AISI 316L steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsISO-A hydraulic quick coupling with shut-off valve and internal metric thread. Application: power hydraulics (hydraulic oil). The quick coupling is mainly used in agricultural machinery. Commonly referred to as "euro couplings." Interchangeable with ISO-A quick couplings from other manufacturers. Material: galvanized steel. Seal of the coupling: NBR. Operating temperature: from -25°C to +100°C. Working pressure: 250 bar. Safety factor 4:1. Flow rate is given at Δp = 3 bar [l/min].
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic end fitting (type Z - with a regular hydraulic "tail" for hose), with internal BSP thread and nut, sealing cone 60° (DKR), angled 45°. Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the hose type. Surface coated with zinc-nickel with a layer thickness of 6-10 µm, characterized by very high corrosion resistance (up to 720 hours without corrosion in a salt spray chamber). Material: carbon steel, zinc-nickel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsNitto Kohki series SP CUPLA type A socket with a shut-off valve, featuring internal BSPT thread, excellent durability, designed for water, hydraulic oils, steam, chemicals, air, and gases. Material: brass. Working pressure: 50 bar (1/8", 1/4", 3/8"), 30 bar (1/2", 3/4", 1"), 20 bar (1.1/4", 1.1/2"), 15 bar (2"). Operating temperature: from -20°C to +80°C (NBR), from -20°C to +180°C (viton), from -40°C to +150°C (EPDM).
