Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic end (type Z - with a regular hydraulic "tail" for hose), with internal metric thread and nut, sealing with an O-ring on a 24° cone (DKOS), angled 45°, heavy-duty series. Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the hose type. Surface coated with zinc-nickel with a layer thickness of 6-10 µm, characterized by very high corrosion resistance (up to 720 hours without corrosion in a salt spray chamber). Material: carbon steel, zinc-nickel.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCEJN series 525 quick coupling socket (NORDIC RANGE) with internal BSP thread. The socket features an additional O-ring, making it suitable for gas installations. It also has a safety ring to prevent accidental disconnection. Designed for heavy-duty working conditions. Application: hydraulic power (hydraulic oil), industrial (water, steam, fuels and oils, gases and chemicals). Material: zinc-nickel coated steel. Working pressure: up to 450 bar (depending on diameter). Safety factor 4:1. Sealing: viton or NBR. Operating temperature: from -30°C to +100°C (for NBR), from -15°C to +200°C (for viton). Flow rate is specified for a pressure drop of 3 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSAE 3000 flange end (SFL), 45° angled, lightweight series. Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the hose type. Surface coated with zinc-nickel with a layer thickness of 6-10 µm, which exhibits very high corrosion resistance (up to 720 hours without corrosion in a salt spray chamber). Material: carbon steel, zinc-nickel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCEJN series 525 quick coupling plug (NORDIC RANGE) without valve with internal BSP thread. Designed for heavy-duty working conditions. Application: hydraulic power (hydraulic oil), industrial (water, steam, fuels and oils, gases and chemicals). Material: steel coated with zinc-nickel. Working pressure: up to 450 bar (depending on diameter). Safety factor 4:1. Sealing: viton or NBR. Operating temperature: from -30°C to +100°C (for NBR), from -15°C to +200°C (for viton). Flow rate is given for a pressure drop of 3 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBanjo type - Z, inch screw without washer. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHANSEN type HK quick coupling with internal NPT and BSP thread. Can be used interchangeably with ISO-B quick couplings from other manufacturers, made to ISO 7241-1 B standard. Designed and manufactured in accordance with the PED directive 2014/68/EU. Application in hydraulic power for hydraulic oil, in industry for water, steam, fuels, oils, gases, and chemicals. Material: AISI 303 steel, AISI 316. Sealing: NBR (operating temperature from -40°C to +121°C), EPDM (operating temperature from -54°C to +149°C), viton (operating temperature from -29°C to +204°C). Working pressure: up to 344 bar (depending on the size of the quick coupling). Flow is specified at Δp = 3 bar [l/min].
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic end fitting (type Z - with a regular hydraulic "tail" for hose), with internal metric thread and nut, face seal (DKL-FL), lightweight series. Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the type of hose. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick coupling plug SNAP-TITE with internal BSP and NPSF thread, manufactured in the USA, without valve. Application: hydraulic power (hydraulic oil), industrial (water, steam, fuels and oils, gases, chemicals). Depending on the application, the appropriate material for the coupling and sealing must be selected. Standard: MIL-C-51234. Working pressure: up to 690 bar (depending on the size of the quick coupling), safety factor 2:1. Material: AISI 316 steel. Operating temperature: from -56°C to +240°C - depending on the type of socket seal. Flow has been provided for a pressure drop of 3 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSAE 3000 flange end (SFL), 45° angled, lightweight series. Designed for clamping in hydraulic and industrial hoses using a crimping sleeve suitable for the type of hose. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBlind plug for HOLMBURY quick coupling socket (NORDIC INTERCHANGE) protecting the connections from contamination, which may result in damage to components and the ingress of impurities into the system. Material: PVC.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSAE 6000 flange end (SFL), heavy series. Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the type of hose. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug for a quick-connect socket, type HS, protecting against contamination and damage. Material: polypropylene. Color: red.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsISO-A hydraulic quick coupling socket with shut-off valve and external metric thread (DIN 2353). Application: power hydraulics (hydraulic oil). The quick coupling is mainly used in agricultural machinery. Commonly referred to as "euro couplings." Interchangeable with ISO-A quick couplings from other manufacturers. Material: galvanized steel. Socket sealing: NBR. Operating temperature: from -20°C to +100°C. Working pressure: up to 250 bar. Safety factor 4:1. Flow is specified for a pressure drop of 3 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic end fitting (type Z - with a regular hydraulic "tail" for the hose), with a metric tube, sealing with a cutting ring (BEL), lightweight series. Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the hose type. Material: AISI 316L steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsISO-A hydraulic quick coupling socket with shut-off valve and internal BSP thread. "Push-pull" version - automatic disconnection upon accidental tensioning of the hose. Application: power hydraulics (hydraulic oil). The quick coupling is mainly used in agricultural machinery. Commonly referred to as "euro couplings." Interchangeable with ISO-A quick couplings from other manufacturers. Material: galvanized steel. Socket sealing: NBR. Operating temperature: from -25°C to +100°C. Working pressure: 250 bar. Safety factor 4:1. Flow rate provided at Δp = 3 bar [l/min].
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic end (type Z - with a regular hydraulic "tail" for hose), with internal BSP thread and nut, sealing with an O-ring on a 60° cone (DKOR), 90° angled. Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the hose type. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic end (type Z - with a regular hydraulic "tail" for the hose), with internal UNF thread and nut, sealing on a 74° cone (DKJ), angled 45°. Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the hose type. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBP7 clamp sleeve for thermoplastic hoses compliant with SAE100R7 standard. The sleeve with a diameter of 5/32" is intended for hoses type OL7, VE7, and AT7. Installation - no machining required. Diameter D1 [mm] - outer diameter. Diameter D2 [mm] - inner diameter. Diameter D3 [mm] - lock diameter. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsProtective cap for DIN quick-connect sockets, prevents dirt from entering the connector and system, which may result in damage to hydraulic system components. Material: PVC. Color: red.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsGromellee quick coupling socket type ISO 6150B DN 8 with internal BSP thread, compact design, and very low weight, for air. Working pressure: 16 bar. Operating temperature: from -20°C to +100°C. Flow rate: 700 l/min, Pe = 6 bar, Δp = 0.6 bar. Material: duralumin (socket body), nickel-plated brass (connection), hardened steel (button), galvanized steel (valve). Sealing: NBR.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic end fitting (type Z - with a regular hydraulic "tail" for hose), with internal metric thread and nut, O-ring seal on a 24° cone (DKOL), 90° angled, lightweight series. Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the type of hose (use sleeves additionally marked with the letters "-PH" at the end of the index). Material: AISI 316 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug cap for a quick-connect coupling, type HS, protecting against contamination and damage. Material: polypropylene. Color: red.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic end (type Z - with a regular hydraulic "tail" for the hose), with internal BSP thread and nut, flat sealing - requires the use of an additional flat gasket (DKR-F). Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the type of hose. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBlind plug for HANSEN quick coupling socket standard ISO-B, protecting the connections from contamination that may result in damage to components and the ingress of impurities into the system. Material: PVC.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic end (type Z - with a regular hydraulic "tail" for hose), with internal metric thread and nut, metal-metal sealing, universal cone 24°/60° (DKL), lightweight series. Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the type of hose (use sleeves marked additionally with the letters "-PH" at the end of the index). Material: AISI 316 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHydraulic quick coupling plug ISO-A with shut-off valve, internal BSP thread, and pressure eliminator. Application: power hydraulics (hydraulic oil). The quick coupling is mainly used in agricultural machinery. Commonly referred to as "euro couplings." Interchangeable with ISO-A quick couplings from other manufacturers. Material: galvanized steel. Seal of the plug: NBR. Operating temperature: from -25°C to +100°C. Working pressure: up to 250 bar. Safety factor 4:1. Flow rate is given at Δp = 3 bar [l/min].
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic end fitting (type Z - with a regular hydraulic "tail" for the hose), with internal BSP thread and nut, flat sealing - requires the use of an additional flat gasket (DKR-F). Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the type of hose (use sleeves marked additionally with the letters "-PH" at the end of the index). Material: AISI 316 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic end fitting (type Z - with a regular hydraulic "tail" for hose), with internal BSP thread and nut, flat sealing - requires the use of an additional flat gasket (DKR-F), 90° angled. Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the type of hose (use sleeves marked additionally with the letters "-PH" at the end of the index). Material: AISI 316 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic end fitting (type Z - with a regular hydraulic "tail" for hose), with internal metric thread and nut, metal-metal sealing, universal cone 24°/60° (DKL), lightweight series. Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the hose type. Surface coated with zinc-nickel with a layer thickness of 6-10 µm, characterized by very high corrosion resistance (up to 720 hours without corrosion in a salt spray chamber). Material: carbon steel, zinc-nickel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic end (type Z – with a regular hydraulic "tail" for hose), with external UNF thread, face seal with O-ring (ORFS). Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the type of hose. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic end fitting (type Z - with a regular hydraulic "tail" for hose), with internal BSP thread and nut, 60° sealing cone (DKR), 90° angled type COMPACT. Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the hose type. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic end (type Z - with a regular hydraulic "tail" for the hose), with internal UNF thread and nut, sealing on a 74° cone (DKJ). Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the hose type. Surface coated with zinc-nickel with a layer thickness of 6-10 µm, characterized by very high corrosion resistance (up to 720 hours without corrosion in a salt spray chamber). Material: carbon steel, zinc-nickel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFull-flow quick coupling socket Nitto Kohki series TSP CUPLA with internal BSPT thread, featuring excellent durability, designed for water, hydraulic oils, steam, chemicals, air, and gases. Particularly recommended for high-viscosity fluids such as lubricants. Material: brass. Working pressure: 50 bar (1/8", 1/4", 3/8"), 30 bar (1/2", 3/4", 1"), 20 bar (1.1/4", 1.1/2"), 15 bar (2"). Operating temperature: from -20°C to +80°C (NBR).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic end (type Z - with a regular hydraulic "tail" for hoses), with external metric thread, sealing on a 60° cone (CEL), lightweight series. Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the hose type. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic end fitting (type Z - with a regular hydraulic "tail" for hose), with internal metric thread and nut, O-ring seal on a 24° cone (DKOL), 45° angled, lightweight series. Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the hose type. Material: AISI 316L steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsZ2TX (PH) clamping sleeve for rubber hydraulic hoses type 1SN, 2SN, or 2SC. Installation - no machining required. Use for hydraulic fittings (PH). Diameter D1 [mm] - outer diameter. Material: AISI 316 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic end (type Z - with a regular hydraulic "tail" for hose), with internal BSP thread and nut, 60° sealing cone (DKR), angled 45°. Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the hose type. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic end (type Z - with a regular hydraulic "tail" for the hose), with internal BSP thread and nut, sealing on a 60° reverse cone - type TOYOTA. Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the hose type. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic end fitting (type Z - with a regular hydraulic "tail" for hose), with internal BSP thread and nut, sealing cone 60° (DKR), angled 45°. Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the type of hose. Material: AISI 316L steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMC-BP7 clamping sleeve for thermoplastic hoses type R7 (SAE100R7). Assembly - no machining. Material: AISI 304 steel.
