Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsPERROT lever connector plug with PN 10 flange, widely used in agricultural farms, horticulture, industry, construction, road and tunnel building, groundwater drainage, wastewater treatment plants, sewage discharge, and environmental protection. Material: carbon steel, galvanized. Working pressure: up to 10 bar.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDDC dry disconnect coupling plug with internal BSP thread made of aluminum, widely used in road, rail, marine, aviation transport, as well as in the petrochemical, chemical, and pharmaceutical industries. Installed on the tank side. The plug design is based on a piston valve (opens during connection and closes when disconnecting the coupling, eliminating liquid leakage). Meets all safety, environmental protection, and reliability requirements for the transfer of hazardous, toxic, or expensive liquids. Manufactured according to NATO standard STANAG 3756 (DDC 2", 2.1/2", 3" and 4") and ATOFINA SGM 2049.TUY.C. (DDC 2", 3"). The couplings comply with ATEX, TDT, ADR, RID, IMDG, pressure directive 97/23/EC. It also has the recommendation of the European Chemical Industry Council CEFIC. Sealing: o-ring (viton), flat gasket (PTFE). Working pressure: 10 bar. Operating temperature: from -25°C to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-quality, strong clamp with a hinged closure for heavy loads with turned-up edges of the band, recommended for securing thick-walled, reinforced industrial hoses and pipes. The unique design ensures uniform pressure around the entire circumference, providing optimal sealing. The movable bridge allows for multiple installations without the need to remove the hose. Manufactured in accordance with the RoHS Directive 2002/95/EC. Three-point welds on the band, a high-strength screw with a spacer along with securing half-rollers guarantee maximum and reliable pressure. The clamp features markings on the band for minimum and maximum diameter as well as the material from which it is made. The W4 version of the clamp is made entirely of stainless steel and is intended for demanding applications where high corrosion resistance is essential - for marine applications and in the food industry. Thanks to the hexagonal head of the screw, commonly used tools such as flat wrenches, socket wrenches, and adjustable wrenches can be used. Important! Exceeding the tightening torque value will cause the screw housing to bend; the use of pneumatic tools for installation is not recommended. The band and bridge are made of AISI 430 steel, while the screw and rollers are made of galvanized steel. The maximum working pressure of up to 45 bar depends on the type of hose and the diameter of the clamp.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-quality three-way ball valve "L" type SK3L with internal BSP thread, designed for high-pressure hydraulic installations. Material: steel (body, ball, stem). Seals: POM (ball), NBR (stem). Operating temperature: from -40°C to +100°C (POM); from -20°C to +100°C (NBR).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCompact, two-piece medium-pressure ball valve designed for demanding general applications. It can be used for precision instrumentation in the chemical, petrochemical, pharmaceutical, energy, and process engineering industries - for liquids and gases. Intended for pipeline installation. The valve features a large size range to ensure sufficiently high flow, tight shut-off (permissible internal leakage through the ball seal 0.1 Ncm³/min), high durability, and low torque. Designed for operation in fully open or fully closed positions. Each valve is pressure tested with nitrogen. Certified according to ISO 15848-1:2006 (E). Body material: AISI 316 steel. Ball and stem material: AISI 316 steel. Lever material: AISI 304 steel, PVC. Ball seal: modified PTFE. Stem seal: PTFE. Operating temperature: from -42°C to +204°C. Working pressure: up to 137 bar (depending on temperature). Connection: BSP female thread.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsV3V L type shut-off valve, two-position three-way, with pneumatic system venting, in a version with a threaded connection with an O-ring on one side and a plug-in connection on the other side (thread - hose). Working pressure: 10 bar. Operating temperature: from -20°C to +60°C. Medium: filtered compressed air, oiled or non-oiled.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsValve designed for the unloading of IBC pallet containers, allowing for unloading without the need to disassemble the cover. For installation on the upper covers of the inlet with a 2" threaded opening. Material: polypropylene. Spring: stainless steel. Seal: polyethylene (LDPE). Opening pressure: 0.069 bar (1 psi).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe most popular type due to the high mechanical resistance of the material. Widely used for standard applications (air, water, oil, gas) but also for "choke and kill" connections, fracturing, and cementing. Set: male part, female part + nut. Color: red (male, female parts), blue (nut). Material: chrome-molybdenum steel 4130. Connection: GW NPT. Sealing: metal/metal (cone) + additional edge seal (NBR). Pressure: 15000 PSI (1034 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSJ swivel joint with a single bearing, designed for connections of rigid or flexible pipes, where it is required that no torsional moment is transferred to other elements of the installation. It is used in the chemical and petrochemical industry. The joint is not resistant to high bending moments; in such cases, it is recommended to use a swivel joint with a double bearing - heavy duty (available on request). The joint meets the requirements of the Pressure Equipment Directive 97/23/EC (PED), TDT, TÜV, Apragaz. Various combinations of the following connections are also available on request: BSP thread, NPT, BSPT, ACME, for welding, PN flanges, ASA, TW, TTMA, grooved joints. Material: AISI 316 steel. Operating temperature: from -40°C to +250°C. Rotations: slow, oscillating. Working pressure: up to 16 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight plug-in partition fitting, type R10, designed for connecting wires and other components in pneumatic systems. Easy and quick to use for multiple assemblies without loss of sealing on the mechanical and pneumatic sides. Material: nickel-plated brass. Working pressure: 16 bar. Working medium: vacuum, air. Operating temperature: from -20°C to +80°C. Sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSTECKO plug connector for use in hydraulic systems for mining. Material: automatic steel, galvanized. Sealing: NBR (o-ring), Teflon (back-up ring).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsRubber nozzle for CEJN guns for use on delicate surfaces; direct installation on the tube. Available diameters: Ø 14 mm, Ø 25 mm, and Ø 34 mm. Working pressure: 16 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHand lever designed for standard two-way and three-way ball valves. To ensure proper selection, the dimension SW of the square stem of the ball valve must be checked. Material: zinc alloy.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsST-357 rotary head with ceramic insert, spray angle 20°. Marked with different colors for calibration identification. Material: brass and plastic. Working pressure: 100 - 250 bar. Operating temperature: up to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° elbow with external NPT thread, type 100HM, intended mainly for the chemical, petrochemical, pharmaceutical, energy, nuclear power, and process engineering industries. Material: AISI 316 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHydraulic end fitting (type P - with a special "tail" for thermoplastic hose) with internal BSP thread, sealing on a 60° cone (DKR). Designed for crimping in UHP thermoplastic hoses using a crimping sleeve suitable for the hose type. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight flange end INTERLOCK SAE 3000, O-ring seal or other gasket in the flange groove, for hose type 4SH, R13, and R15. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHexagonal head plug with external BSPT thread (above 3/8" the plug has an octagonal head). Material: AISI 316 steel. Working pressure 10 bar. The given dimensions are indicative and may vary slightly depending on the manufacturer.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSF type end fitting with flat sealing, intended for low-pressure rubber and non-reinforced and textile-reinforced plastic hoses, with an external steel braid. Commonly used in flexible hoses for sanitary fittings, fuel systems, air systems, etc. Use nut type UM (EC-105…). Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBrass connector for flexible hoses. Material: brass. Working pressure: 25 bar. Operating temperature: up to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSUPERFLEX RADIATOR hose connector designed for engine cooling systems in vehicles and automotive-type engines (for water, ethylene glycol-based coolants). Version with textile reinforcement and a steel spiral to prevent collapse of the bent hose. It features "soft" ends, free of steel spiral, allowing for easy and tight installation on fittings using clamps. The externally corrugated design of the hose bends easily, replacing the original molded connector in many cases and ensuring uninterrupted full flow even with strong bends. The connector design complies with SAE J20 R5 standard and is resistant to temperature and coolants used in automotive applications. No data on working pressure. Operating temperature: from -40°C to +125°C. Connector material: black EPDM rubber. Reinforcement: textile braid + steel spiral.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-quality, highly flexible, resistant to twisting and bending universal industrial hose. Used in industry, construction, agriculture, quarries, mining, and road construction, in the oil and shipbuilding industries. The inner layer is resistant to oil, grease, light chemicals, air, kerosene, cold and hot water. The outer layer has very good abrasion resistance and resistance to animal fats and oils. Due to its high strength and low expansion, it is particularly recommended for drum reels. Outer flame resistance complies with MSHA standard 2G-14C/39. Non-conductive (R > 1 MΩ per inch of hose length at 1000 V DC). Inner layer: black NBR rubber. Reinforcement: aramid braid, for 2" synthetic braid. Outer layer: yellow Carbryn® rubber (XNBR, carboxylated NBR). Working pressure: 35 bar. Operating temperature: from -29°C to +88°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsNut for socket couplings designed for joining hoses made of soft plastics. The connection occurs by fitting the hose onto the end and tightening it by screwing the nut. Material: nickel-plated brass.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsRight-hand bridge worm clamp with a band width of 9 and 12 mm designed for quick and easy multiple fastening of hoses reinforced with steel spiral, e.g., ventilation hoses. The purpose of the bridge is to encompass the spiral wire and ensure precise adherence of the clamp to the hose. The use of the bridge in the clamp provides a tight and non-damaging connection to the hose. The right-hand OMP clamp is intended for mounting typical spiral suction hoses with a right-wound wire spiral, e.g., P1PU, P2PU, P3PU, P7PU, SMARTFLEX. The unique worm mechanism of the clamp in a compact housing and the cold-extruded thread in the band, smooth on the inside, ensure a secure multiple clamping without damaging the hose surface. The number of segments depends on the minimum/maximum diameter of the clamp. Material: AISI 304 steel.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsRubber cover limiting the possibility of hose kinking at the end and restricting the minimum bending radius. For use with standard high-pressure cleaning hoses DN6. Cover color: black.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsGT35 cover made of very dense polyester fabric. Designed to protect individual hoses or bundles of hydraulic and pneumatic lines. It has good mechanical resistance as well as resistance to oils and organic products. Protects the hose and safeguards the operator from oil spray in case of hose rupture. Material: polyester. Operating temperature: +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSafety ring to prevent unintentional disconnection for the SPEEDFIT system used in compressed air installations. The installation can be made using plastic or metal pipes (copper, brass, aluminum) with outer diameters from 12 mm to 28 mm. Material: plastic. Operating temperature: from -20°C to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick filling/emptying cover for IBC pallet container with two vents. The cover is supplied with a gasket. Filling hole thread size: 2″ BSP. Material: polypropylene. Sealing: EPDM. Operating temperature: from -10°C to +70°C (temporarily up to +80°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsTUBOMATIC H25 PI crimping press with pneumatic drive, designed for crimping low-pressure hoses with EC type metal sleeves. Easy and lightweight device, equipped with three sets (of 6 crimping segments each) of jaws: 10 ÷ 13 mm, 13 ÷ 16 mm, 16 ÷ 25 mm. Crimping diameter range: 10 ÷ 25 mm.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBistable 3-position switch VRM-313 N with short lever for VME valve. VME1-000 adapter required for installation. Color: black.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsIndustrial, high-quality, ergonomic NITO II water gun. Handle separated from the hot water flow path, ensuring operator comfort. Internal parts made of aluminum, brass, and stainless steel. Housing made of high-strength Orgalloy plastic resistant to impact. Seals: EPDM / HBR. Features smooth flow regulation and trigger lock. Interchangeable outlet nozzles. Working pressure: 25 bar. Flow rate: 20 ÷ 60 l/min (5 bar) depending on the installed nozzle. Flow with standard nozzle: 40 l/min. Operating temperature: up to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight fitting with external BSP thread and flat gasket type AI 13485 designed for connecting copper, brass, steel, aluminum pipes, etc., as well as plastic pipes and hoses (e.g., polyamide). The range of external diameters of connected pipes is from 4 to 22 mm. The tightness of the connection is achieved by compressing the ring on the connected pipe and simultaneously pressing the pipe with the ring into the socket using a nut. Standard: EN 1254-2. Material: brass. Gasket: NBR. Operating temperature: from -20°C to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsGrease nipple 45° DIN 71412 B used for introducing lubricating substances between cooperating surfaces to reduce friction resistance and wear processes. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPackage screw for clamp DIN 3015 standard type 100/101 with external and internal metric thread, intended for mounting clamps one on top of the other. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCoupling with 2 x internal BSP thread for use in pipe connections of industrial installations. Flat sealing between internal components. Material: ductile iron. Operating temperature: up to +300°C. Working pressure: 25 bar (up to +120°C), 20 bar (up to +300°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThermal tape coated on one side with a bonding adhesive when stretched. Designed to protect hoses, hoses, and pipes from intense radiant heat and flames. The thickness of the tape is approximately 0.76 mm. A 50% overlap is recommended during installation. Material: silica fiber (silicon dioxide). Operating temperature: up to +982°C (temporarily up to +1650°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsY-branch 2x internal BSP thread 1x external BSPT thread type A24, intended for connecting pneumatic elements (including hoses) together. The tightness of the connection usually requires the use of additional seals. In the case of tapered threads, Teflon tape or sealant is used; for cylindrical threads, aluminum or copper washers. Material: nickel-plated brass. Working pressure: 60 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsT-type through plug connector, type R22, designed for connecting hoses and other components in pneumatic systems. Easy and quick to use for multiple assemblies without loss of sealing on the mechanical and pneumatic sides. Material: plastic. Working pressure: 12 bar. Working medium: vacuum, air. Operating temperature: from -20°C to +60°C. Sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard gasket for the female part (socket) of the CAMLOCK coupling. Material: viton. Operating temperature: from -40°C to +200°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery lightweight and flexible hose designed for the transport of air, dust, powders, fine wood shavings and chips, very light bulk materials, etc. Specifically designed according to the requirements of the woodworking and furniture industries, it can also be used in other industrial fields. Compliant with DIN 26057 Type 1. Antistatic and flame-retardant, ensuring high workplace safety. Very flexible and compressible, also elastic at low temperatures. With very good abrasion resistance, also resistant to microbes and hydrolysis. Free from halogen compounds and plasticizers. Resistant to oils and gasoline. The optimal flow direction of the medium is indicated by an arrow. The wall thickness of the hose is measured between the spiral. Installation on couplings with bridge clamps (right-handed). Other diameters may be available upon special request. Antistatic properties: permanently antistatic (according to ISO 8031 resistance R <109 Ω, according to German technical regulations TRGS 727 (6.4.2.4) specific resistance R <2.58 Ωm, according to directive 2014/34/EU (ATEX) can be used in specific explosion hazard zones - which must be preceded by a risk analysis). After effective double grounding of the spiral, it can be treated as electrically conductive – in accordance with BGI 739-2 recommendations. Flame-retardant – according to DIN 4102 class B1. Hose material: transparent polyester-polyurethane. Reinforcement: steel wire spiral. Wall thickness measured between the spiral: 0.4 mm. Operating temperature: from -40°C to +100°C (temporarily up to +125°C).
