Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsConnector with MAN L pressure gauge in a version finished with plug connectors on both sides (hose - hose). The pressure gauge housed in a metal shield ensures accurate readings despite its small size. It can be oriented in any direction by manual rotation. Working pressure: 12 bar. Operating temperature: from -20°C to +60°C. Medium: filtered compressed air, oiled or un-oiled.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsRotary connector with external thread and protective spring for hoses made of soft plastics. Material: nickel-plated brass. Working pressure: 18 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsReduction fitting for the SPEEDFIT system used in compressed air installations. The installation can be made using plastic or metal pipes (copper, brass, aluminum). Material: plastic. Working pressure: 10 bar (+23°C), 7 bar (+70°C). Operating temperature: from -20°C to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° angled socket coupling with internal thread type C5/F designed for connecting hoses made of soft plastics. The connection is made by pushing the hose onto the fitting and tightening it by screwing on the nut. Material: nickel-plated brass. Working pressure: 18 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdaptor serving as additional equipment for shut-off valves of type FPE and FPEA. Working pressure: 350 bar. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsInternal thread adaptor BSP type A6, intended for connecting pneumatic components (including hoses) together. The tightness of the connection usually requires the use of additional seals. In the case of a tapered thread, Teflon tape or sealant is used; for a cylindrical thread, aluminum or copper washers are required. Material: nickel-plated brass. Working pressure: 60 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAir distribution box for the SPEEDFIT system. The package includes two 1/2″ plugs. Material: aluminum. Working pressure: 10 bar (+23°C), 7 bar (+70°C). Operating temperature: from -20°C to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible rubber nozzle for compressed air, designed for quick removal of all contaminants from surfaces. Flow regulation through bending of the nozzle. It performs excellently in situations where we deal with delicate surfaces prone to damage from direct contact. Depending on the connection, we distinguish between a nozzle with a hose end of 6 mm and 9 mm diameter or a EUROSTANDARD 7.2 plug. Nozzle opening diameter: 2 mm. Nominal flow: 200 l/min at 6 bar pressure. Maximum pressure: 10 bar. Operating pressure: 1 ÷ 6 bar. Operating temperature: from -10°C to +50°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMultifunctional, lightweight, exceptionally flexible and elastic hose resistant to oil and gasoline. Designed for air, water, oils, fuels, lubricants, chemicals (e.g., light acids and bases), pesticides, fertilizers, etc. Smooth outer layer resistant to weather conditions, aging, ozone, UV radiation, non-soiling. Popular and widely used in industry, construction, agriculture, automotive workshops. Inner layer: black NBR/PU/PVC blend. Reinforcement: polyester braid. Outer layer: black NBR/PVC blend. Working pressure: 25 bar. Operating temperature: from -20°C to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMedium-sized quick-connect socket with hose end designed for washing installations, deionized water filtration, industrial machines, leak detection, etc. The distinctive design (does not include balls and securing sleeves) allows for easier, secure connection and disconnection with one hand. The effectiveness of the connection is indicated by an audible click. Material: polypropylene. Sealing: EPDM o-ring. Working pressure: up to 8.3 bar. Operating temperature: from 0°C to +71°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-quality quick-connect water socket NiTO 3/4" with hose end and shut-off valve. Material: chrome-plated brass. Working pressure: up to 25 bar. Operating temperature: up to +80°C. Sealing: NBR (not suitable for gasoline and oils). For valve O-ring with EPDM.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight double BANJO fitting type DRS, intended for low-pressure rubber and non-reinforced plastic hoses as well as those with textile reinforcement, with an external steel braid. Commonly used in flexible hoses for sanitary fittings, fuel installations, air systems, etc. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsEnd fitting for grease fittings type DIN 71412 A, DIN 71412 B, and DIN 71412 C with internal metric thread. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHydraulic end fitting (type P - with a special "tail" for thermoplastic hose) with internal metric thread, sealing with an O-ring on a 24° cone (DKOS), heavy-duty series. Designed for crimping in UHP thermoplastic hoses using a crimping sleeve suitable for the hose type. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / Details45° INTERLOCK SAE 6000 flange end, O-ring seal or other gasket in the flange groove, for hose type 4SH, R13, and R15. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSKV plug coupling with a locking nut and INTERLOCK type "tail" designed for hydraulic hoses type 4SH, R13, R15 (in sizes 3/4" to 1.1/2"). Sealing: NBR. Material: galvanized steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHexagonal plug with external thread NPT, BSP, BSPT, UNF, and UN, for threaded couplings primarily intended for the chemical, petrochemical, pharmaceutical, energy, nuclear power, and process engineering industries. The plug with UNF and UN thread is equipped with an O-ring seal. Material: AISI 316 steel. Seal: FKM 90 O-ring.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMT2 type lance with thermal insulation designed for high-pressure washer. Connections: (inlet) GZ 1/4" BSP / (outlet) GW 1/4" NPT. Working pressure: up to 280 bar. Flow rate: 40 l/min. Operating temperature: up to +150°C. Material: stainless steel.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsWeldable nipple with external BSPT thread for use in piping connections of industrial installations. Material: AISI 316 steel. Working pressure: 10 bar. The given dimensions are indicative and may vary slightly depending on the manufacturer.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThermal protection in the form of rolls or shorter sheets designed to protect hoses, hoses, and other components from metal splashes, intense radiant heat, flames, and welding spatter. High content of pure silica (over 96%) ensures excellent temperature resistance, flexibility, and minimal shrinkage. It does not emit smoke or fumes. Available in three versions, in rolls of 915 mm and 1525 mm width: SILICAFLEX BLANKET 18 – thickness 0.76 mm, SILICAFLEX BLANKET 32 – thickness 1.25 mm, SILICAFLEX BLANKET 36 – thickness 1.27 mm. There is also a special version of SILICAFLEX BLANKET coated with a reflective aluminum layer (FQSFB36-36AL). The aluminized SILICAFLEX BLANKET, in addition to the features of the standard SILICAFLEX cover and reflecting intensely radiating heat, also has better tear and abrasion resistance, as well as improved water and oil resistance. Material: silica fiber (silicon dioxide). Operating temperature: up to +982°C (temporarily up to +1650°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsWhite identification ring (gas) for Hansen Beverage quick coupling socket. Material: plastic.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAKBO HEAVY DUTY water gun made of AISI 316 steel, with a rubber grip and insulated trigger. Not intended for steam. Body material: AISI 316 steel. Trigger and pusher material: stainless steel. EPDM rubber covers. Sealing: viton. Connection: 1/2" BSP. Working pressure: 24 bar. Flow rate: 75 l/min. Operating temperature: up to +95°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsShort bottom plate for welding for the assembly of heavy complete DIN 3015 clamp type 201. Material: carbon steel or AISI 316L steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMB cover, without chain, for TW loading connectors. Used for VK (male) parts, serves as a pressure-resistant plug. Material: brass. Operating temperature: from -20°C to +65°C (considering the medium and sealing material). Seal type TWF, seal material: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsTUBOMATIC H25 crimping press with manual drive, designed for crimping low-pressure hoses with EC type ferrules. Easy and lightweight device, equipped with three sets (of 6 crimping segments each) of jaws: 10 ÷ 13 mm, 13 ÷ 16 mm, 16 ÷ 25 mm. Crimping diameter range: 10 ÷ 25 mm.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBANJO fitting with external BSP thread type AI 13550 designed for connecting copper, brass, steel, aluminum pipes, etc., as well as plastic pipes and hoses (e.g., polyamide). The range of external diameters of connected pipes is from 4 to 22 mm. The tightness of the connection is achieved by crimping the ring on the connected pipe and simultaneously pressing the pipe with the ring into the socket using a nut. Standard: EN 1254-2. Material: brass. Seal: NBR. Operating temperature: from -20°C to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSuction and pressure hose of the latest generation specially designed according to the high requirements of the beer processing industry. It is intended for the transfer of high-quality raw beer, pasteurized beer, and organic beer. The inner layer is completely free of phthalates, plasticizers, and animal-derived components, eliminating the risk of medium contamination and bacterial growth. The outer layer is resistant to abrasion, aging, and weather conditions. Tested and approved for beer transfer by the Technical University of WEIHENSTEPHAN in Munich – does not alter the taste of the beer. Standards and requirements: 1) General: EC 2002/95 (RoHS), EC 1907/2006 (REACH). 2) Food industry, food contact: 1935/2004/EC, 2023/2006/EC (GMP). Inner layer compliant with FDA 21 CFR 177.2600, D.M. 21/03/73, 3-A n. 18-03-Class II. Inner layer: white bromobutyl rubber (BIIR). Reinforcement: synthetic cord, steel spiral. Outer layer: red CR rubber. Working pressure: 10 bar. Operating temperature: -40°C to +120°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsScrew fitting with internal BSP thread and external BSPT thread for use in piping connections of industrial installations. Flat sealing between internal components. Material: ductile iron. Operating temperature: up to +300°C. Working pressure: 25 bar (up to +120°C), 20 bar (up to +300°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDynamic silencer MWSPL with external thread used in compressed air systems to reduce noise levels. The noise reduction achievable by installing the silencer, measured at a supply pressure of 5 bar, at a distance of 1m and at an angle of 45° from the axis of the silencer, averages 30 dB depending on the size. Material: black acetal resin, acoustic insulation. Operating temperature: from -10°C to +60°C. Working pressure: 6 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsL-shaped tee coupling with external BSPT thread type B8 with a locking ring designed for connecting copper pipes and plastic hoses. When connecting to hoses, the use of reinforcing sleeves (B12) is recommended. Material: nickel-plated brass. Working pressure: 60 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsL-shaped tee with external BSPT thread type C8 designed for connecting hoses made of soft plastics. The connection is made by pushing the hose onto the fitting and tightening it by screwing on the nut. Material: nickel-plated brass. Working pressure: 18 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsExceptionally flexible hose designed for compressed air. Due to features such as: lightweight, flexibility at low temperatures, resistance to elongation, it is particularly recommended for pneumatic tools, compressors, hose reels, etc. Inner layer: black PVC. Reinforcement: polyester braid. Outer layer: blue PVC. Working pressure: 15 bar. Operating temperature: from -20°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery lightweight, extremely flexible and elastic hose designed for the removal of dust, powder, contaminated air, fumes, vapors, etc. Thanks to its unique construction with longitudinal and transverse reinforcement made of synthetic fibers and a steel spiral, it features a very small bending radius, resistance to kinking, and exceptional tensile strength. Durable and reliable, widely used in industrial and household vacuum systems, in construction work for cleaning and drying, and as a protective hose. Cadmium-free in accordance with BGR 132. Discharge of electric charges through grounding of the steel spiral. The left-handed reinforcing spiral allows for the attachment of appropriate fittings for vacuum cleaners with a left-hand thread (PVC fittings for the SUPERELASTIC hose or other suitable ones). Hose mounting with clamps on appropriate ends, pipe fittings, etc. Hose material: two layers of soft PVC reinforced with fiber. Reinforcement: steel spiral coated with PVC. Operating temperature: from 0°C to +85°C (operating pressure dependent on temperature).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsGeneral-purpose hydraulic hose. Standards: EN 853 1SN, ISO 1436-1SN/R1AT, SAE 100R1AT. Inner layer: black, oil-resistant synthetic rubber. Reinforcement: single steel braid. Outer layer: black, oil-resistant synthetic rubber. Working pressure: from 40 bar to 250 bar depending on hose diameter. Operating temperature: from -40°C to +100°C (temporarily +125°C). For water and air, maximum operating temperature +70°C. For air above 17 bar, micro-perforation of the outer layer is required.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThin-walled protective hose reinforced with vulcanized synthetic braid. Material of the outer layer: black SBR rubber. Operating temperature: from -30°C to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, highly flexible hose for air, gases, water, and other media. Used in systems where there is a risk of electric charge accumulation and in explosion hazard zones. Compliant with the ATEX directive (2014/34/EU). Surface resistance R < 106 Ω. Resistant to hydrolysis, microorganisms, abrasion, and UV radiation. Calibrated outer diameter allows compatibility with plug couplings. Recommended for applications in the electronics industry, powder coating, explosion hazard zones, mining, conveyors, and part sorters. Working pressures are stated with a safety factor of 2:1 relative to the maximum pressure that does not cause hose damage. Hose material: antistatic polyurethane PUR. Working pressure: from 9 bar to 16 bar (depending on hose diameter). Operating temperature: from -30°C to +80°C. Vacuum: up to 0.95 bar (when under vacuum, the bending radius should be increased by 20%).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-quality suction and discharge hose designed for the transfer of aggressive chemical substances, solvents, and concentrated chemicals, characterized by high thermal and mechanical strength and the highest purity of the inner layer. The inner layer is made of white perfluoroalkoxy polymer MFA (fluoropolymer with properties similar to Teflon), mirror-smooth (prevents medium deposition on the walls and is easy to clean), odorless and tasteless, meeting high hygiene requirements (FDA, USP, European EU). Intermediate layers made of synthetic rubber, reinforced with synthetic cord, and a steel wire spiral. The outer layer is made of EPDM rubber, antistatic (R<106 Ω), abrasion-resistant, ozone-resistant, and weather-resistant. The hose features excellent chemical resistance and purity of MFA, impermeability, temperature resistance, oxidation resistance, and mechanical stress resistance. Widely used in the chemical industry due to its total resistance to most chemical substances. Suitable for the transfer of concentrated acids and alkalis (sulfuric acid, hydrochloric acid, phosphoric acid, nitric acid, sodium hydroxide, potassium hydroxide, etc.). Resistant to rigorous cleaning conditions using the Cleaning-in-Place (CIP) method. On special order, version M according to EN 12115 with two built-in copper wires for discharging electric charges. Standards and requirements: Chemical hoses: EN 12115:2011 (type Ω). Food industry, contact with food: 1935/2004/EC, 2023/2006/EC (GMP); inner layer: 10/2011/EU, USP Class VI, FDA 21 CFR 177.1550 (e-i); ISO 10993. Does not contain plasticizers, phthalates, or animal-derived substances. Assembly: use smooth fittings with a spigot ("tail" for the hose) that do not have sharp or high ribs that could cut or damage the inner layer made of MFA when tightened. The diameter of the spigot should be precisely matched to the diameter of the hose to ensure tightness. Assembly with clamp sleeves or shell clamps. Confirmation of resistance and application conditions requires contact with Tubes International. Inner layer: white MFA polymer. Reinforcement: synthetic cord, steel spiral. Outer layer: black EPDM rubber. Working pressure: 16 bar. Operating temperature: from -50°C to +170°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFilter element "F" and "FR" for the NEW DEAL series.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick coupling plug NiTO made of AISI 316L stainless steel with a hose end. Available in two systems: 1/2″ and 3/4″. Used in conditions with high hygiene and corrosion resistance requirements (e.g., food industry, hospitals). Direct connection of components from different systems is not allowed, e.g., a 1/2″ socket with a 3/4″ plug. Material: AISI 316L steel. Working pressure: 25 bar. Operating temperature: from -20°C to +150°C. Sealing material: viton.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCAMLOCK FW connector plug for welding (butt welding) made according to the American military standard MIL-C-27487 (A-A-59326), commonly used as a transfer connection, particularly in the petrochemical industry. Working pressure: up to 10 bar, depending on the size of the connector. Material: AISI 316 steel.
