Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsReusable pressure vessel for filling with technical fluids, equipped with a universal filling valve ("automotive"). Capacity: 400 ml. Working pressure: 5 ÷ 10 bar. Strength: 80 bar.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMedium-sized 90° quick-connect plug with hose end intended for washing installations, deionized water filtration, industrial machines, leak detection, etc. Length L [mm] - total length. Material: acetal. Sealing: NBR o-ring. Working pressure: up to 8.3 bar. Operating temperature: from -40°C to +82°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsReduction plug with one side ending in a tube (fitting), and the other side ending in a plug coupling, series S, type PGJM. An economical solution for connecting flexible pneumatic hoses with a metric calibrated outer diameter. Easy and quick to use. Material: plastic. Working pressure: 10 bar. Vacuum: 0.99 bar. Operating temperature: from 0°C to +60°C. Sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsNiTO SC quick coupling plug, with disconnection protection, with external thread. For use with hot water (above +60°C) in installation areas where it is directly used by the operator and frequently disconnected. For NiTO II or Heavy Duty gun. Material: chrome-plated brass. Working pressure: up to 25 bar. Operating temperature: up to +150°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, very flexible pressure hose designed for the transfer of water, juices, beverages, and other food products at temperatures up to +40°C. The absence of phthalates in the hose material makes it suitable for the transfer of milk and its derivatives, as well as alcohols with concentrations up to 50% and temperatures up to +40°C. Not recommended for oils and fatty food substances. Also widely used in industry and laboratories for compressed air, gases, and light chemicals. The reinforcement with a spiral braid ensures high pressure resistance and low deformation of the hose under pressure, even with pressure pulsations (within the working pressure range). Standards and requirements: Food industry, food contact: compliant with European regulations 1935/2004/EC and 10/2011/EU (simulant fluids A, B, C, and D1), 2023/2006/EC (GMP). Hose material: transparent PVC. Reinforcement: polyester braid. Working pressure: from 9 bar to 27 bar, depending on the hose diameter. Operating temperature: from -15°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThrottle-return valve type MRF NTC series COMPACT "N" for direct mounting in actuator connections, used in pneumatic systems for regulating the flow rate of compressed air and flow direction. Equipped with a plug-in coupling for easy disassembly of pneumatic hoses. Adjustment change via a control knob and/or screwdriver; possibility of securing the setting with a locking nut. Size: M5, 1/8″, 1/4″, 3/8″, 1/2″. Working pressure: up to 10 bar. Operating temperature: from -10°C to +50°C. Material: plastic.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal ball valve type 4174 intended for industrial installations. It can be used for air, gases, water, chemicals, petrochemical products, etc., considering the chemical resistance of the valve material and sealing. It meets the requirements of the PED directive 2014/68/EU. The working pressure depends on the operating temperature. Body material: nickel-plated brass. Ball material: chrome-plated brass. Lever material: aluminum. Ball sealing: PTFE. Stem sealing: NBR. Connection: BSP female thread. Operating temperature: from -20°C to +110°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsRotary nozzle RM for unblocking sewage without a central hole. Connection: GW 1/4" BSP. Material: stainless steel (body), brass (rotor). Working pressure: up to 150 bar. Diameter: 19 mm.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsTransparent screen protecting the operator from contaminants; equipped with a nitrile rubber sleeve facilitating installation at any height of the tube (nozzle). Material: plastic.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSAFLOK® C socket with hose end is a variant of the CAMLOCK coupling with protection against accidental disconnection. The protection consists of spring-loaded latches located in the socket levers. When closing the lever, the latches automatically lock. Unlocking when opening requires pulling back the latches. The SAFLOK® C socket is compatible with other CAMLOCK couplings made according to the MIL-C-27487 standard. Spare parts are available: levers with latches and pins. Material: AISI 316 steel. Sealing: NBR. Working pressure: 20 bar (1/2" ÷ 2"), 10 bar (2.1/2" ÷ 4"). Operating temperature: from -40°C to +93°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-quality quick-connect water socket NiTO 1" with hose end and shut-off valve. Material: chrome-plated brass. Working pressure: up to 25 bar. Operating temperature: up to +80°C. Sealing: NBR (not suitable for gasoline and oils). For valve O-ring with EPDM.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsEAR CLIP clamp ring with 1 ear for mounting various types of low-pressure hoses reinforced with a braid or without reinforcement. Easy and quick installation using specially designed pliers. Rounded edges inside the ring protect the hose from damage. Material: AISI 304 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° reducing elbow with internal BSP thread for use in piping connections of industrial installations. Material: ductile iron. Operating temperature: up to +300°C. Working pressure: 25 bar (up to +120°C), 20 bar (up to +300°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsWobble flange with ball joint for mounting on the rear part of the actuator cover. Included: 4 screws with washers. Material: cast aluminum (flange), steel (joint), galvanized carbon steel (screws and washers).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDesigned for absorbing vibrations and shocks as well as linear and angular displacements in water installations. Not intended for transmitting media containing oil. Has PZH certification for drinking water. Inner layer: EPDM rubber. Reinforcement: nylon cord. Outer layer: EPDM rubber. Connections: BSP thread, cast iron, galvanized. Operating temperature: from -10°C to +100°C (depending on the medium).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsExtended lance with thermal insulation, designed for high-pressure washer. Length: 375 mm. Connections: (inlet) GZ 1/4" BSP / (outlet) GW M22x1.5. Working pressure: up to 310 bar. Maximum pressure: 350 bar. Flow rate: 45 l/min. Operating temperature: up to +160°C. Material: stainless steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCAMLOCK coupling chain. Length: 200 mm or 300 mm. Material: AISI 316 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong suction and discharge hose designed for fatty and non-fatty food substances, requiring the use of odorless and tasteless rubber. It contains no plasticizers, phthalates, or animal-derived substances. Particularly recommended for handling and heavy working conditions. Widely used in the food industry in dairies and oil mills. The inner layer made of NBR is resistant to commonly used cleaning agents and processes in the food industry. The outer layer is resistant to temporary contact with animal and vegetable fats, abrasion, and weather conditions. Standards and requirements: 1) General: EC 2002/95 (RoHS), EC 1907/2006 (REACH). 2) Food industry, food contact: EC 1935/2004, EC 2023/2006 (GMP). The inner layer complies with D.M. 21/03/73, FDA 21 CFR 177.2600, BfR, 3A Sanitary Standards. RAL (German Institute for Quality Assurance and Certification). Vacuum: 0.9 bar. Inner layer: white NBR rubber. Reinforcement: synthetic cord, steel spiral. Outer layer: blue CR rubber. Working pressure: 10 bar. Operating temperature: from -20°C to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDevice for mounting steel bands of the Band-It® system with a built-in knife for cutting excess band and a spring-loaded grip for improved handling. Allowed band width: 1/4" ÷ 3/4". Maximum band thickness: 0.76 mm. Application: Band-It® Standard and Band-It® Junior - in this case, the use of adapter BD-J00199 is necessary.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsRubber cover for nozzle with internal NPT thread for mounting on lance, protecting delicate cleaning surfaces from scratches. Designed for nozzle with external 1/4" NPT thread. Cover material: synthetic rubber. Connection material: stainless steel. Working pressure: 500 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAKBO HEAVY DUTY water gun for use in the first and second explosion hazard zones (ATEX). It has a TüV certificate. Made of AISI 316 stainless steel, with EPDM rubber covers and Viton seals. It features an adjustable outlet nozzle, smooth flow regulation, and a trigger lock. Connection: 1/2" BSP. Working pressure: 24 bar. Maximum operating temperature: +60°C. Flow rate: 30 l/min (5 bar), 70 l/min (24 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsConnection with internal thread for 3/4" tap and reduction to 1/2" or for 1" tap and reduction to 3/4" allows for the connection of a garden hose with a mounted quick coupling to a source of running water. Material: PVC. Working pressure: up to 6 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsORFS fitting with internal BSP thread (seal on the thread - with Teflon tape or anaerobic sealant), type GAI-B. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMonoblock sliding valve YFM80 controlled by manual levers with centering springs. Designed for hydraulic systems of cranes, lifts, construction machinery, agricultural machinery, etc. Standardly equipped with a safety valve (factory set to 180 bar) and type 1 sliders. Material: cast iron (body), hardened steel (sliders). Sealing: NBR. Maximum working pressure: 250 bar. Maximum return pressure: 50 bar. Operating temperature: from -20°C to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMetal-rubber gasket DOWTY, metric, for high-pressure connections. Material: washer - AISI 316L steel, sealing - viton.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, exceptionally flexible and compressible hose designed for air conditioning, air exhaust and blowing, and welding fume extraction. Widely used for extraction arms, ventilation, tent heating, and drying of construction structures. Self-extinguishing and non-flammable (flame-retardant) according to UL94 V-0. Resistant to hydrolysis and microbes. Other diameters ranging from 30 to 800 mm and colors: black, blue, white, and yellow are available upon special order. Hose installation on couplings with bridge clamps (right-handed). Hose material: polyester fabric impregnated with gray PVC. Wall thickness: 0.4 mm. Reinforcement: steel wire spiral. Operating temperature: from -30°C to +80°C (temporarily up to +100°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible suction and discharge hose designed for water-cooled exhaust systems of diesel engines in motorboats up to 24 meters in length and yachts (free discharge under low pressure of mixed exhaust gases and cooling water). Used in sections between installation components. Inner layer resistant to exhaust gases. Steel spiral ensures resistance to vacuum. Outer layer resistant to abrasion, oil, and weather conditions. The hose is available in two versions of the outer layer: smooth - AMALFI LL and corrugated - AMALFI LO. Compliant with ISO 13363:2016 type 2B, SAE J2006:2013 type R2. It has Lloyds type certificate LR2003044TA and RINA DIP021521CS/002 (AMALFI LL) and RINA DIP021521CS/003 (AMALFI LO). Other diameters and the AMALFI CORD discharge hose (without steel spiral) are available on special order. Inner layer: black synthetic rubber. Reinforcement: synthetic cord, steel spiral. Outer layer: black synthetic rubber. Burst pressure: ≥2.5 bar. Operating temperature: from -30°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible hose designed for hydraulic oil installations, fuels, water-based fluids. For use near transformers and medium and high voltage electrical installations. Non-conductive - leakage during testing according to standards less than 50 µA for a voltage of 246 kV/m for 5 minutes. Standards: ANSI 92.2, SAE 100R7, ISO 3949-R7. Inner layer: polyester. Reinforcement: double polyester braid. Outer layer: orange polyurethane. Working pressure: from 70 bar to 230 bar, depending on hose diameter. Operating temperature: from -40°C to +100°C (for water up to +70°C).
- Select options This product has multiple variants. The options may be chosen on the product page / Details
WEICON Multi-Purpose Agent W44T, spray
All products | Cleaning agents, maintenance products, assembly compounds, and protective coatings0 złHigh-quality agent for service and maintenance work in the industrial and workshop applications. W44T loosens seized screws, displaces moisture, eliminates squeaks and creaks, cleans dirty metallic surfaces, protects and maintains tools and equipment. Packaging - spray 50 ml or 400 ml. - Select options This product has multiple variants. The options may be chosen on the product page / DetailsTwo-part insert for clamp DIN 3015 type 301 made according to DIN 3015 standard. Standardly features a profiled (grooved) surface for the pipe opening. Insert material: green polypropylene. Operating temperature: from -30°C to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMedium-sized quick coupling plug with hose end intended for washing installations, deionized water filtration, industrial machines, leak detection, etc. Length L [mm] - total length. Material: polypropylene. Sealing: EPDM o-ring. Working pressure: up to 8.3 bar. Operating temperature: from 0°C to +71°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBlind plug for series R connector, type R9. Material: plastic. Working pressure: 12 bar. Operating temperature: from -20°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal two-piece ball valve with full bore and lever lock type 2006SC/SM3, intended for industrial installations. It can be used for air, gases, water, steam, chemicals, petrochemical products, etc., considering the chemical resistance of the valve material and sealing. It meets the requirements of the PED Directive 2014/68/EU. Body material: stainless steel CF8M. Ball material: stainless steel CF8M. Lever material: steel AISI 304. Ball sealing: PTFE / RTFE. Stem sealing: PTFE. Connection: BSP female thread. Operating temperature: from -20°C to +200°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal electric control distribution valve (solenoid valve), without control coil, most commonly used for controlling actuator operation. It can be mounted inline, to a wall, directly to actuators, or on a connection block. Function 5/3 - five-way, three-position. Distributor sizes: 1/8", 1/4", 3/8", 1/2". Material: valve body - aluminum, slider - nickel-plated aluminum, sealing - NBR, end cover - plastic. Working pressure: up to 10 bar. Operating temperature: -10°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal check valve type 2050 designed to protect installations from backflow of the working medium. It can be used for air, gases, water, chemicals, petrochemical products, etc., considering the chemical resistance of the valve material. The valve must be installed according to the flow direction indicated on the body. The working pressure depends on the operating temperature. Body material: stainless steel CF8M. Spring material: steel AISI 304. Disc: steel AISI 316. Sealing: PTFE. Connection: BSP thread. Operating temperature: from -20°C to +200°C. Working pressure: up to 13 bar (+200°C), up to 50 bar (+40°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdapter for high-pressure cleaning devices with a metric connection M22x1.5 on both sides. Material: brass. Working pressure: up to 280 bar. Operating temperature: up to +160°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAutomatic drum reel made of stainless steel designed for cold and hot water, oil, lubricants, and other media. The retractable spring tested for 25,000 winding and unwinding cycles. Compliant with ATEX directive 94/9 IIB 2GD c T4 T135C X. Includes hose bumper. Rotating suspension or additional fixed suspension for quick disassembly (e.g., in winter) must be ordered separately. The drum is not equipped with a hose, which must also be ordered separately. For a diameter of 3/8", the hose length that the drum can accommodate is 17 meters; for a diameter of 1/2" - 10 meters. Material: AISI 304 steel. Sealing: viton. Operating temperature: up to +130°C (without hose).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFour-way fitting with internal BSP thread for use in piping connections of industrial installations. Material: ductile iron. Operating temperature: up to +300°C. Working pressure: 25 bar (up to +120°C), 20 bar (up to +300°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsRM nozzle for unblocking sewage without a central hole. Connection: GW 1/4" BSP. Material: stainless steel. Working pressure: up to 300 bar. Diameter: Ø19 mm.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFilter mesh designed for water, oil, and gas installations. It is used to capture and remove mechanical impurities from the system. The filter must be installed according to the flow direction indicated on the body. The working pressure depends on the operating temperature. Body material: AISI 316 steel. Sealing: PTFE. Filter element: AISI 316 steel. Connection: BSP thread. Operating temperature: from -20°C to +200°C. Working pressure: up to 13 bar (+200°C), up to 50 bar (+40°C). Filter hole diameter: 1 mm. Hole density: 2 mm.
