Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSAFLOK® DU socket with BSP internal thread is a variant of the CAMLOCK coupling with protection against accidental disconnection. The protection consists of spring-loaded latches located in the levers of the socket. When closing the levers, the latches automatically lock. Unlocking when opening requires pulling back the latches. The SAFLOK® DU socket is compatible with other CAMLOCK couplings made according to MIL-C-27487 standards. Spare parts are available: levers with latches and pins. The coupling size 1/2" has a thread of 1/2" and a socket of 3/4". Material: AISI 316 steel. Sealing: NBR. Working pressure: 20 bar (1/2" ÷ 2"), 10 bar (2.1/2" ÷ 4"). Operating temperature: from -40°C to +93°C.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMedium-sized quick coupling socket with hose end intended for washing installations, deionized water filtration, industrial machines, leak detection, etc. The characteristic design (does not contain balls and a securing sleeve) allows for easier, secure connection and disconnection with one hand. The effectiveness of the connection is indicated by an audible click. Length L [mm] - total length. Material: acetal. Sealing: NBR o-ring. Working pressure: up to 8.3 bar. Operating temperature: from -40°C to +82°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCAMLOCK D connector socket with internal BSP thread made according to the American military standard MIL-C-27487 (A-A-59326), commonly used as a transfer connection, particularly in the petrochemical industry. Working pressure: up to 7 bar, depending on the size of the connector. Material: polypropylene reinforced with fiberglass. Levers: AISI 304 steel. Sealing: EPDM.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsClosing flange SAE 3000 for use in hydraulic systems, supplied with mounting screws and an O-ring seal (NBR). Material: carbon steel, galvanized. Operating temperature: from -20°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCompensator designed for use in installations where the medium consists of mineral oils, vegetable and animal fats, aerosol oils, water with the addition of anti-corrosive substances. Inner layer: NBR rubber. Reinforcement: nylon braid. Outer layer: NBR rubber. Flanges: galvanized carbon steel. Operating temperature: up to +80°C (depending on the medium).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSet of interchangeable seals for ISO 15552 actuator Ø 160 - 200. Material: NBR. Diameter: Ø 160, Ø 200.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsScrewed hydraulic end, type S, with internal BSP thread and nut, sealing cone 60° (DKR). Designed for screwing into rubber and thermoplastic hoses using a screwed sleeve. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMT2 type thermal insulation lance intended for high-pressure washer. Connections: (inlet) GW M22x1.5 / (outlet) GZ M18x1.5. Working pressure: up to 250 bar. Flow rate: 40 l/min. Operating temperature: up to +150°C. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDurable hand pliers designed for the installation of EAR-CLIP type or similar hose ties. The jaw profile allows for easy and reliable front clamping.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight water-air gun (air is used to increase the stream's force). Made of aluminum, tips made of chrome-plated brass, cover made of EPDM rubber, nozzle made of plastic. Used in meat industry plants. Connection: 2 x 10 mm hose fitting. Working pressure: 5 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsUpper plate for mounting DIN 3015 standard clamp type 101. For size group 0, there is one hole for a screw. For size group 1 to 6, there are two holes for screws. Material: carbon steel, galvanized or AISI 316L steel.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdjustable 90° angle fitting ORFS with external BSP thread (O-ring seal with washer), type WE-BG. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsComfortable five-finger work gloves made of durable material - nylon. The inner side of the gloves is coated with polyurethane. Available in size: 9 or 10.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsProfiled gasket according to DIN 3869 for high-pressure connections with metric and/or inch threads according to DIN 3852-11E. Material: NBR, hardness 85 according to Shore.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery strong and durable high-pressure air hose. Designed for use in harsh working conditions – "heavy duty." The outer layer is resistant to aging, ozone, and weather conditions. Used in industry, mining, quarries, construction, road construction, etc. Available on special order: 1. outer layer compliant with MSHA; 2. inner layer resistant to oil mist; 3. other diameters, pressures, and colors; 4. version resistant to temperatures up to 100°C. Possibility of installing hose fittings. Standard length: 60 m or 120 m. Inner layer: black SBR rubber. Reinforcement: double steel braid. Outer layer: yellow EPDM rubber. Working pressure: from 30 bar to 70 bar - depending on the hose diameter. Operating temperature: from -30°C to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible hose designed for the transfer of liquid food substances, drinking water, and chemicals. The inner layer of the hose is made of high-density polyethylene (HDPE) of food quality. This material meets high requirements for drinking water regarding the absence of migration of components to the water remaining in the hose and the lack of tendency to form biofilm (microbiological test). At the same time, it meets food contact requirements for liquid food substances and has very high chemical resistance (acids, bases, hydrocarbons, solvents). Therefore, the hose can be used for: 1) drinking water installations (Germany: KTW, DVGW); 2) liquid food substances (water, fruit juices, alcohols, milk and its products, fats and oils); 3) chemicals in a wide range (selection in contact with Tubes International Sp. z o.o.). Thanks to the multi-layer construction of the hose, where the intermediate and outer layers are made of soft polyethylene, the hose is very flexible. For installation, fittings with a spigot ("tail" for the hose) without sharp notches that could cut the inner layer of HDPE upon tightening should be used. Standards and requirements: 1) Food industry, food contact - compliant with European requirements 1935/2004/EC and 10/2011/EU (simulant fluids A, B, C, D1, D2), 2023/2006/EC (GMP). 2) Approval for drinking water KTW-A (certificate from the German Institute of Hygiene) and DVGW W270 (microbiological material test). Inner layer: HDPE polyethylene. Intermediate layers: natural soft polyethylene PE. Reinforcement: polyester braid. Outer layer: blue soft polyethylene PE. Working pressure: 16 bar, dependent on temperature. Operating temperature: from -15°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, very flexible and elastic hose designed for the extraction of hot vapors, smoke, gases, blowing, and the discharge of cooling air. Reinforced version of the NEOPRENE 1 hose, with two layers of fabric impregnated with neoprene and a steel spiral placed between the layers. Chemically resistant, UV resistant, and aging resistant. Used, among others, for hot air in granulate dryers and film blowers in plastic processing, in paint dryers in printing houses, other industrial dryers, in the electronics industry, in vehicles and engines for cooling air, incinerators, as well as for the extraction of exhaust gases and welding gases. Smooth inside (in a straightened state), with a small bending radius allowing easy installation in tight spaces of equipment and vehicles. Installation with clamps. Other diameters and lengths, soft ends of sections, etc., available on special order. Hose material: two glass fabrics impregnated with black CR rubber (Neoprene® - chloroprene rubber). Reinforcement: steel wire spiral, with two fiberglass cords on the outside. Operating temperature: from -35°C to +135°C (temporarily up to +150°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible hose designed for hydraulic oil installations, gases, air, fuels, water-based fluids. Standards: DIN 24951, SAE 100R7, ISO 3949-R7. Inner layer: polyester. Reinforcement: double polyester braid. Outer layer: micro-perforated polyurethane. Working pressure: from 77 bar to 235 bar, depending on hose diameter. Operating temperature: from -40°C to +93°C (for water and air up to +65°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-viscosity anaerobic adhesive for securing screws against loosening, very strong, difficult to disassemble. Color: green. Maximum thread diameter: up to M20 or R3/4". Operating temperature range: from -60°C to +180°C. Breakaway torque for the screw: 30-35 Nm. Time to achieve initial strength: 2-5 min (depending on the material). Time to achieve full strength: after 2-4 h (depending on the material). Pen-type container.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-quality quick-connect water plug NiTO 3/4" with internal thread. Material: chrome-plated brass. Working pressure: up to 25 bar. Operating temperature: up to +80°C. Sealing: NBR (not suitable for gasoline and oils).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBand-It® Standard system tape fasteners. Fasteners with so-called "ears" secure the end of the tape after bending. Material: AISI 201 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal ball valve type 7163 intended for gas installations, in pressure class MOP 5-20. Complies with the requirements of the PED directive 2014/68/EU and 2009/142/EC, in accordance with standard EN331 + A1. Maximum constant working pressure across the full temperature range. Body material: nickel-plated brass. Ball material: chrome-plated brass. Lever material: carbon steel. Ball sealing: PTFE. Stem sealing: FKM + NBR. Connection: BSP thread. Operating temperature: from -20°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSTOP shut-off valve series STP-U with a check valve and internal thread, primarily used as a safety valve. When installed on the actuator's supply connections, it allows airflow only in the presence of a pneumatic control signal. The actuator is stopped after a drop in control pressure. Operating pressure: 0.5 ÷ 10 bar. Operating temperature: from -10°C to +60°C. Body material: nickel-plated brass. Sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsRubber nozzle set for CEJN guns for use on delicate surfaces; direct installation on the tube. Available diameters: Ø 14 mm, Ø 25 mm, and Ø 34 mm. Working pressure: 16 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° adjustable angled plug connector with internal thread, type R34/F, designed for connecting hoses and other components in pneumatic systems. Easy and quick to use for multiple assemblies without loss of sealing on the mechanical and pneumatic sides. Material: plastic. Working pressure: 12 bar. Working medium: vacuum, air. Operating temperature: from -20°C to +60°C. Sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThree-part long adaptor for high-pressure cleaning devices with metric connection M22x1.5. Material: brass. Working pressure: up to 280 bar. Operating temperature: up to +160°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAutomatic drum reel made of stainless steel designed for cold and hot water, oil, lubricants, and other media. The retractable spring tested for 25,000 winding and unwinding cycles. Compliant with ATEX directive 94/9 IIB 2GD c T4 T135C X. Includes hose bumper. The drum is not equipped with a hose, which must be ordered separately. Rotating suspension or additional fixed suspension for quick disassembly (e.g., in winter) ordered separately. Advantages: rotating connection made of AISI 304 steel, viton sealing. Material: AISI 304 steel. Sealing: viton. Operating temperature: up to +130°C (without hose).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFoam nozzle 50200 with 1/2” BSP external thread, spray angle 50°, flow rate 200 l/min at 20 bar pressure. Material: stainless steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsProfessional key with a flexible steel arm ending in a 7 mm socket for ASFA-L, ASFA-S, and similar worm clamps. The arm length allows work in hard-to-reach places. Comfortable ergonomic handle ensures a secure grip. Handle color: blue.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDesigned for sanitary installations, cold and hot water, pool water, seawater, drinking water. Not suitable for mineral oils, cooling water with corrosion inhibitors containing oil, oil-laden air, and installations where the constant working pressure exceeds 10 bar. Marked on the sleeve with a single red dot. Inner layer: butyl rubber (IIR) / EPDM. Reinforcement: nylon cord. Outer layer: EPDM rubber. Flanges: galvanized carbon steel. Operating temperature: from -40°C to +90°C (temporarily +120°C depending on the medium).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSet of interchangeable seals for compact actuator ISO 21287, LINER series. Material: polyurethane. Diameter: 80, 100.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVentilated extension lance with nozzle protection, designed for high-pressure washer. Connections: (inlet) GZ 1/4" BSP / (outlet) GW 1/4" NPT. Working pressure: up to 250 bar. Permissible pressure: 280 bar. Flow rate: 45 l/min. Operating temperature: up to +160°C. Material: stainless steel.
- Select options This product has multiple variants. The options may be chosen on the product page / Detailscoupling for joining two garden hoses with installed quick coupling sockets. Material: PVC. Working pressure: up to 6 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal "premium" class gun for air, water, and non-explosive fluids, designed for more demanding users. Effectively cleans surfaces of contaminants with air and water. Ideal for cooling surfaces during metal processing. Features unmatched blowing power, with adjustable stream shape - from narrow to wide and adjustable intensity. The nozzle design ensures no medium leakage. Plastic nozzle edges prevent damage to the cleaned surface. Lightweight construction, non-slip grip, and ergonomic shape of the gun provide high work comfort. Impact and crack-resistant housing qualifies the device for use in harsh conditions. Material: polyoxymethylene (POM), thermoplastic elastomer (TPE), aluminum (Al). Sealing: NBR. Working pressure: 16 bar. Burst pressure: 64 bar. Operating temperature: from -20°C to +60°C (16 bar) / up to +80°C (10 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsWater nozzle for washing and cleaning, with a flow adjustable using the thumb. The greater the bending radius, the stronger the water flow, and it closes when the nozzle returns to the horizontal position. The nozzle is resistant to external damage (stepping on it, being run over by a vehicle, etc.). Made of EPDM rubber, with a brass head. Special precautions must be taken when working with hot water. Not intended for steam! Connection: 3/4" BSP. Maximum working pressure: 16 bar. Maximum operating temperature: +65°C (continuous operation). Flow rate: 13.5 l/min (at 2.5 bar pressure). Weight: 280g. Length: 230 mm.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard handle (lever) for CAMLOCK couplings, type HR. Material: AISI 304 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSelf-closing band in full epoxy coating (increased corrosion protection, non-toxic material, halogen-free) designed for easy and simple manual installation or using a tensioning and cutting tool (index: BD-KE9229). It has high resistance to fire, corrosion, UV radiation, and high and low temperatures. Material: AISI 316 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsY-type reducing tee connector with plug connections for hoses with metric diameter, series S, type PYM. An economical solution for connecting flexible pneumatic hoses with calibrated metric outer diameter. Easy and quick to use. Material: plastic. Working pressure: 10 bar. Vacuum: 0.99 bar. Operating temperature: from 0°C to +60°C. Sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsScrewed sleeve for rubber hydraulic hoses type 2SN (R2T). Use only with a screwed fitting from the same supplier (TI-S…). Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCircular cross-section gasket (o-ring) for general use (range 2.9x1.78 ÷ 17.3x2.4). Material: NBR, hardness 70 Shore.
