Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh quality hose for cleaning for industry food. high resistance to abrasion and kinking. excellent resistance to oils and fats. Do use in industry food, dairy, etc. Layer inner compliant with FDA 177:2600. Inner layer: black blend rubber NBR. Reinforcement: a synthetic braid. Outer layer: blue rubber Carbryn® secured coating Microban. Working pressure: 20 bar. Operating temperature: od -30°C up to +93°C.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA universal, very flexible, unreinforced hose intended for pressureless (or pod very low pressure) conveying air, water and liquids in use general-industrial, light chemicals (np. diluted acids and bases) and as A guard pipes, lines, cables itp. It can be used (at temperatures up to +40°C) for substances food such as juices, drinks, beer, wine, alcohols with a concentration up to 50%, milk and its dairy products. Not recommended for oils and greasy food substances. hose CRISTALLO EXTRA complies with the European requirements 1935/2004/EC, 10/2011/EU (simulants A, B, C and D1), 2023/2006/EC (GMP). Suitable for temporary contact with food when conveying food substances - under the conditions specified in the manufacturer's declaration of conformity (available at Tubes International). The stated working pressure is the approximate value of the recommended working pressure at a safety factor of 5:1. Hose material: transparent PVC. Operating temperature: from -20°C to +60°C, working pressure depends on temperature.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible hose o calibrated diameter outer, intended specially for installations pneumatic automotive systems brake. Not contains plasticisers, not stiffens and is resistant to radiation UV. Available only in black. standard: ISO 7628 : 2010 (category 1). Hose material: thermoplastic elastomer (TPE) based on polyester. Working pressure: 10 bar. Operating temperature: od -40°C for + 100°C (for media based on water +65°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh quality hydrophobic hose delivery made in accordance with technology improvement platinum. free of odour and taste. smooth surface prevents adhesion contaminants. sterilization steam in temperature +135°C, alternatively argon, cobalt. compliant with requirements FDA, USP kl.VI, European Pharmacopoeia 3.1.9 and directives EC 1935/2004 and EC 2023/2006 (GMP). Safety factor 3:1. Inner layer: semi-transparent silicone. Reinforcement: a polyester braid. Outer layer: semi-transparent silicone. Operating temperature: od -60°C up to +200°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMultifunction, light, exceptionally pliable and flexible hose resistant to oil and gasoline. intended for air, water, oils, fuels, greases, chemicals (np. light acids and bases), pesticides, fertilisers itp. smooth Layer outer resistant to conditions atmospheric, aging, ozone, radiation UV, non-staining. popular and Widely used in industry, construction, agriculture, workshops automotive. Inner layer: black blend NBR/PU/PVC. Reinforcement: a polyester braid. Outer layer: black blend NBR/PVC. Working pressure: 25 bar. Operating temperature: from -20°C to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsExceptionally flexible hose intended for compressed air. Due to such features as: lightness, flexibility in low temperatures, resistance to elongation is especially recommended for tools pneumatic, compressors, hose reels drum, etc. Inner layer: black PVC. Reinforcement: a polyester braid. Outer layer: blue PVC. Working pressure: 15 bar. temperatures use: od -20°C up to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe highest quality, very flexible, resistant to twisting and kinking A universal hose industrial. used in industry, construction, agriculture, quarries, mining and road construction, in industry petroleum and shipbuilding. Layer inner resistant to action oil, fats, light chemicals, air, kerosene (naphtha), cold and hot water. Layer outer has very good resistance to abrasion and on fats animal and oils. Due to high strength and low expansion especially recommended for hose reels drum. outer resistance to flame compliant with the standard MSHA 2G-14C/39. Non-conductive (R > 1 MΩ/inch of hose length at a voltage of 1000 V DC). Inner layer: black NBR rubber. Reinforcement: an aramid braid, for 2" a synthetic braid. Outer layer: yellow rubber Carbryn® (XNBR, carboxylated NBR). Working pressure: 35 bar. Operating temperature: from -29°C to +88°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose delivery intended for water cooling in smelters, foundries and we all use, where hose rubber works close source heat. coated fiber glass resistant to temperature up to +530°C caused radiation thermal. used in systems cooling. especially recommended for installation water at furnaces metallurgical. resistant to momentary action splashes red-hot hot metal. Roll length: 60 m or 120 m. Inner layer: black EPDM rubber. Reinforcement: cord synthetic. Outer layer: EPDM rubber coated fiber glass. Working pressure: 10 bar. Operating temperature: od -40°C up to +120°C, outer up to +530°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA light, flexible hose with a calibrated outer diameter, intended for pneumatic, hydraulic, oil, fuel, lubrication and chemical systems. Available in colours: natural, black, blue, red, yellow. Hose material: polyamide PA 12 (nylon). Working pressure: from 19 bar to 28 bar, depending on the diameter and wall thickness wall hose. Operating temperature: od -40°C up to +80°C (for media based on water +70°C). standard: SAE J 844 (diameter od 1/8" for 5/16").
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPneumatic extension - ready rubber line for air made with hose MPX20. terminated brass socket and a plug quick coupling Eurostandard DN7.2 (matches for typical connections). Do use general, in particular for tools pneumatic, tam where required is hose rubber o properties antistatic. Inner layer: black EPDM rubber. Reinforcement: textile braid. Outer layer: black EPDM rubber. Working pressure: 20 bar. Operating temperature: from -40°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsIndustrial hose for water and air. Widely used for washing hot water floors and equipment industrial. is suitable also for use external. resistant to conditions atmospheric, ozone and abrasion. Not is resistant to oil, not recommended also for air with mist oil. Inner layer: black EPDM rubber. Reinforcement: a polyester braid. Outer layer: red EPDM rubber. Working pressure: 10 bar. Operating temperature: od -40°C up to +100°C (momentarily up to 120°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBlack, opaque and flexible hose with fluoroelastomer (Viton), resistant na fuels, solvents, oils, chemicals, in particular at elevated temperature. used for concentrated acids, bases, alcohols, solvents chlorinated and aromatic, hot fuels and oils. is suitable for pumps peristaltic. resistant na aging, ozone, light solar and conditions atmospheric. flame-retardant. opaque black wall hose secures substances sensitive na light. used in laboratories and use general-industrial. constitutes economical alternative for hose VERSILONTM F-5500-A. length full roll hose 50 m (for diameter internal od 4 mm for 12 mm - 25 m, od 15 mm - 5 m). The given working pressure is determined relative to the bursting pressure at a safety factor of 1:5. Material: rubber fluoro (FKM). temperature use: from -20°C to +200°C (momentarily up to +300°C). temperature brittleness: -20°C. Hardness: 60° Shore (A) - for 4x6 mm, 70° Shore (A) - for 4x8 mm. Density: 1.90 g/cm³. Note: The product is packaged in the Tubes International Clean Zone (CLEAN ROOM) in compliance with rigorous standards. Return of the product after opening the package is not possible.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA light, flexible hose with a calibrated outer diameter, intended for pneumatic, hydraulic, oil, fuel, lubrication and chemical systems. especially recommended for industrial or automotive installations hot liquids (fuels, oils, agents refrigerant) or air, not containing water. Available only in black. Hose material: modified polyamide PPA. Working pressure: from 10 bar to 44 bar (depending on the diameter and wall thickness wall hose). Operating temperature: od -40°C for + 150°C (for media based on water +70°C). standard: DIN 73378, ISO 7628.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose silicone reinforced polyester intended is for systems cooling and systems heating in vehicles (water, liquids cooling, air clean or with small amount mist oil). For oils, fuels and oil mist, a version with a fluorosilicone inner layer is recommended. length standard: 1000 mm (Available also in section 2000 mm). Pressure safety factor: 3:1. The hose meets the SAE J20R1 standards. Hardness (standard version) approx. 65° Shore (A), density approx. 1.26 g/cm³. color layer outer: blue. Material: rubber silicone. Reinforcement: polyester plies. pressure working: od 0.86 bar for 8.75 bar (depending on diameter hose). Operating temperature: from -50°C to +180°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose delivery for conveying almost all aggressive substances chemical. designed specially for industry petrochemical for fuels o high concentration carbon aromatic, hot oil and solvents. Ze regard na high general resistance chemical rubber FPM can be used for aggressive chemicals, in many cases also in elevated temperatures. Layer inner with smooth black rubber fluorine FKM. Reinforcement cord synthetic. Layer outer with rubber chloroprene CR resistant na conditions atmospheric, ozone, abrasion and oils. Confirmation of resistance and application conditions requires contact with Tubes International, in particular for temperatures above 50 º C. Inner layer: black rubber FKM (FPM, Viton). Reinforcement: synthetic cord. Outer layer: black rubber CR. pressure working: 10 bar. temperature use: from -25°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsConnector hose RADIATOR intended for systems cooling engine in vehicles and engines type automotive (for water, liquids cooling na base glycol ethylene). Meets the requirements of the SAE J20 R4 Class D-1 standard. Available in the molds simple a connector o length 1000 mm. pressure working: od 0.6 bar for 3.7 bar, depending on diameter a connector. Operating temperature: from -40°C to +125°C. Safety factor (bursting pressure / maximum working pressure) 3:1. Material a connector: black rubber EPDM. Reinforcement: textile braid.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery light hose multilayer o layer internal with resistant to abrasion and oil polyurethane, layer intermediate and outer with blend thermoplastic and PVC. very flexible, o small radius bending, not kinking. resistant to ozone, fats, oils and light chemicals. intended for compressed air and liquids. Widely used in industry for tools pneumatic, for air for guns for spraying and painting paints based on water, sandblasting, itp. is suitable for mounting on drums. The inner layer has approval for food contact - compliant with the European requirements 1935/2004/EC and 10/2011/EU (simulant fluids A, B and C), 2023/2006/EC (GMP). Inner layer: transparent polyurethane. Intermediate layer: PVC/PU (color black). Reinforcement: a polyester braid. Outer layer: TPE / PVC (color turquoise). Working pressure at a temperature of 20°C: 20 bar. Operating temperature: from -15°C to +60°C. As the working temperature rises, the hose's working pressure value decreases.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose pneumatic with polyethylene and aluminum for use in pneumatic systems control. very good resistance chemical layer outer allows on operation in environment aggressive chemical. Reinforcement in the molds aluminum coating increases strength hose co allows on assembly long sections without additional brackets. additional its advantage is possession tak called memory shape, enabling assembly in hard reachable places. can work buried without needs use additional covers. thanks to unique design, hose is about 5 times lighter od standard hoses pneumatic. Inner layer: polyethylene. Reinforcement: aluminum. Outer layer: black polyethylene. Working pressure: from 20 bar to 28.8 bar (depending on the diameter hose). Operating temperature: od -40°C up to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible, neutral biologically hose made in accordance with technology improvement peroxide hydrogen. retains properties chemical, electrical and mechanical in temperature up to +200°C. sterilization steam, oxide ethylene, radiation. meets standards FDA, BfR, USP (kl.VI), standards quality ISO 10993 (toxicity, irritation, cytotoxicity, hemolysis). Material: semi-transparent silicone. Hardness: 62° ±5° Shore (A). Density: 1.15 ±0.03 g/cm 3. Operating temperature: od -50°C up to +200°C (momentarily +230°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose delivery for conveying anhydrous ammonia in the molds liquid and gas. Layer inner with thick rubber antistatic (R≤10 6 Ω/m). Reinforcement with high-strength cord ensures high factor safety 5:1. Layer outer with rubber antistatic (R≤10 6 Ω/m) resistant na chemicals, abrasion, ozone and conditions atmospheric, micro-perforated. hose compliant with requirements standards EN ISO 5771:2008 for hoses rubber for conveying anhydrous ammonia. hose intended in particular for ammonia in processes production fertilizers nitric, agents cleaning and for syntheses many compounds chemical. can be used in other fields industry, using anhydrous ammonia, such jak refrigeration industrial (agent R717 – ammonia, used is in large installations refrigeration; hoses flexible serve primarily for filling installation), metallurgy and many other. hose can be also used for ammonia dissolved in water - water ammonia, used wide in industry m.in. in treatment plants sewage (regulator pH), for regeneration resins ion-exchange, in industry gum and plastics and for treatment water boiler. Inner layer: black rubber synthetic. Reinforcement: synthetic cord. Outer layer: black rubber synthetic, micro-perforated. pressure working: 25 bar. temperature use: from -40°C to +55°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsElbow 90° RADIATOR intended for systems cooling engine in vehicles and engines type automotive (for water, liquids cooling na base glycol ethylene). Meets the requirements of the SAE J20 R4 Class D-1 standard. available with arms o length 200, 250 and 300 mm. pressure working: od 0.6 bar for 4.1 bar, depending on diameter elbow. Operating temperature: from -40°C to +125°C. Safety factor (bursting pressure / maximum working pressure) 3:1. Material a connector: black rubber EPDM. Reinforcement: textile braid.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery light, flat (at rest), delivery hose intended for conveying water. economical solution for average conditions use. used in agriculture, construction and in other fields industry. Available in two versions: HIFLAT LD (green) and HIFLAT HD (blue). Inner layer: black PVC. Reinforcement: spacer polyester. Outer layer: green PVC (LD), blue PVC (HD). Working pressure: from 2.5 bar to 10 bar - depending on the diameter hose and temperatures and type hose (LD, HD). Operating temperature: od -20°C up to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPneumatic extension – ready line for air made with hose WTZ o diameter 10 mm and o length 10 or 15 m. terminated brass socket (TP-ES72-GK-10) and a plug (TP-ES72-WK-10) standard quick coupling pneumatic Eurostandard DN 7.2. the simplest solution for connection tools pneumatic. Inner layer: transparent PVC. Reinforcement: a polyester braid. Outer layer: transparent PVC. Working pressure at a temperature of 20°C: 10 bar. Operating temperature: from -5°C to +50°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, very flexible double hose used in systems pneumatic, hydraulic, lines tool, robots industrial, etc. Resistant to abrasion, solvents, fuels, hydrocarbons. Retains flexibility at low temperatures. Hardness per Shore (A): 90°. Hose material: polyurethane PUR (blue + black). Working pressure: from 12 bar to 23 bar (depending on the diameter hose). Operating temperature: od -40°C up to +85°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh quality hose silicone Widely used in industry (e.g. in systems cooling and for hot air). exceptionally resistant to vapours oil mineral. hardness 65° Shore (A). Inner layer: blue silicone. Reinforcement: plies textile. Outer layer: blue silicone. Operating temperature: od -60°C up to +180°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsElbow silicone 90° reinforced polyester intended is for systems cooling and systems heating in vehicles (water, liquids cooling, air clean or with small amount mist oil). For oils, fuels and oil mist, a version with a fluorosilicone inner layer is recommended. Arm length: 100 mm (also available with arms of length 152, 250 mm). Pressure safety factor: 3:1. The hose meets the SAE J20R1 standards. Hardness (standard version) approx. 65° Shore (A), density approx. 1.26 g/cm³. color layer outer: blue. Material: rubber silicone. Reinforcement: polyester plies. pressure working: od 1.83 bar for 8.75 bar (depending on diameter hose). Operating temperature: from -50°C to +180°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible hose general purpose reinforced a braid for compressed air, water, light chemicals. It can be used (at temperatures up to +40°C) for liquid and semi-liquid products food such as juices, drinks, beer, wine, alcohols with a concentration up to 50%, milk and its dairy products. Not recommended for oils and greasy food substances. hose REFITTEX CR complies with the European requirements 1935/2004/EC, 10/2011/EU (simulants A, B, C and D1), 2023/2006/EC (GMP). Suitable for temporary contact with food when conveying food substances - under the conditions specified in the manufacturer's declaration of conformity (available at Tubes International). Inner layer: transparent PVC. Reinforcement: a polyester braid. Outer layer: transparent PVC. Working pressure: from 5 bar to 30 bar, depending on the diameter hose. Operating temperature: from -20°C to +60°C, working pressure depends on temperature.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, transparent, flexible hose made with patented elastomer thermoplastic for applications biotechnological. is suitable for use in pumps peristaltic. non-toxic, non-hemolytic and pyrogen-free o high class purity, easily weldable thermally, co is important in processes biotechnological. possible sterilization in autoclave, radiation and oxide ethylene. resistant to action concentrated acids and bases. meets requirements USP kl. VI. Hose material: elastomer thermoplastic. Hardness: 60° Shore (A). Operating temperature: od -45°C up to +135°C. features leading: welding thermal using C’eal-Flex™ TPE Ultra Sealer.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery light economical hose, flat at rest, intended for conveying water. economical solution for low pressures working and not requiring conditions use. used in agriculture e.g. for irrigation crops, construction and in other fields industry. Hose material: blue PVC. Reinforcement: spacer polyester. Working pressure: 3 bar. Operating temperature: od -5°C up to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh quality multifunction flexible hose manufactured in Great Britain. intended for water, air and light chemicals. The hose material contains no phthalates, silicone or cadmium and complies with the RoHS and WEEE regulations. In accordance with EU regulations, use for food products is possible after first carrying out the required migration tests using appropriate model fluids simulating the given type of food (the material used to make the hose complies with the requirements of 10/2011/EU and FDA 21). The hose material is self-extinguishing per UL94-V2 and UL94-HB (at a thickness of 3 mm). Inner layer: transparent PVC. Reinforcement: a polyester braid. Outer layer: red (R) or blue (BL) PVC. Working pressure: from 10 bar to 18.3 bar - depending on the diameter hose. Operating temperature: from -20°C to +55°C (momentarily +65°C, temperature bending on cold for -45°C). As the working temperature rises, the hose's working pressure value decreases.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose delivery specially designed for transport water cooling, used at furnaces metallurgical, systems cooling transformers and transducers electric. used in metallurgy steel. Layer outer coated fiber glass resistant to action radiation heat up to +550°C (momentarily) and splashes hot materials. Layer inner insulating (dielectric), R>10 11 Ω, durable on breakdown electrical E≥6000 V/mm, o increased resistance to penetration water and steam at extreme parameters use. minimal radius bends in data technical stated is for pressure above 3 bar. Inner layer: light blue, insulating EPDM rubber. Reinforcement: cord synthetic. Outer layer: EPDM rubber coated fiber glass. Working pressure: 20 bar. Operating temperature: od -35°C up to +120°C, outer up to +550°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose made in accordance with technology improvement platinum o exceptional purity, intended for applications biotechnological. resistant to action high temperatures, ozone, radiation radiation, moisture, action conditions atmospheric. Not adsorbs and not absorbs odour ani taste. can be repeatedly sterilised in autoclave a also oxide ethylene or by radiation. Meets FDA requirements, USP kl. VI, ISO 10993, European Pharmacopoeia 3.1.9 and Japanese Pharmacopoeia - section 51. Safety factor 5:1. Material: transparent silicone. Hardness: 50° Shore (A). Density: 1.17 g/cm³. Operating temperature: od -65°C up to +260°C. length hose: 7.62 m, 15.24 m or 30.48 m.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose SUPER FLEX reinforced polyester and a spiral steel intended is for systems cooling and systems heating in vehicles (water, liquids cooling, air clean or with small amount mist oil). For oils, fuels and oil mist, a version made of fluorine rubber (fluorocarbon) is recommended. length standard: 1000 mm. Pressure safety factor: 3:1. The hose meets the SAE J20R1 standards. Hardness (standard version) approx. 65° Shore (A), density approx. 1.26 g/cm³. color layer outer: blue. Material: rubber silicone. Reinforcement: polyester plies + A spiral steel (wall thickness wire 1.2 mm). pressure working: od 2 bar for 8.12 bar (depending on diameter hose). Operating temperature: from -50°C to +180°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong hose delivery with layer inner with resistant chemical polyethylene o ultra-high weight molecular (UPE, UHMWPE). The inner layer is resistant to most acids and bases and many other aggressive chemicals (in elevated, ale nie very high temperatures), co makes, that hose is wide used in industry chemical and petrochemical. Layer inner with UPE is also compliant with requirements for hoses food, free of phthalates and polycyclic carbon aromatic (PAH), is characterized also low a coefficient friction during flow and prevents deposition medium na walls. This significantly facilitates cleaning and allows use also in the cosmetic, pharmaceutical and food industry. Reinforcement cord synthetic, built-in cable copper for discharge charges electrostatic. Layer outer with resistant chemical rubber EPDM, resistant na abrasion, ozone and conditions atmospheric. compliant with requirements EN 12115:2011 (type M, resistance between fitting the line R ≤ 100 Ω, guaranteed for lines o length for 40 m). standards and requirements: hoses chemical: EN 12115:2011. industry food, contact with food (Layer inner): 1935/2004/EC, 2023/2006/EC (GMP ), 10/2011/EU (simulant fluids A, B, D2), FDA 21 CFR 177.1520, BfR III. Confirmation of resistance and application conditions requires contact with Tubes International, in particular for temperatures above 50°C. Inner layer: white cream polyethylene UPE. Reinforcement: synthetic cord. Outer layer: black rubber EPDM. pressure working: 16 bar. temperature use: from -40°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsElbow silicone 180° reinforced polyester intended is for systems cooling and systems heating in vehicles (water, liquids cooling, air clean or with small amount mist oil). For oils, fuels and oil mist, a version with a fluorosilicone inner layer is recommended. Standard arm length: 102 mm. Pressure safety factor: 3:1. The hose meets the SAE J20R1 standards. Hardness (standard version) approx. 65° Shore (A), density approx. 1.26 g/cm³. color layer outer: blue. Material: rubber silicone. Reinforcement: polyester plies. pressure working: od 2 bar for 8.12 bar (depending on diameter hose). Operating temperature: from -50°C to +180°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsColorless, crystalline transparent, flexible hose chemical o multilayer the structure with inner layer with fluoropolymer FEP o unique resistance and inert chemical. Characterized significantly greater flexibility than rigid hoses made completely with PTFE or other fluoropolymers. smooth Layer inner, resistant and inert chemical eliminates risk contaminants liquid. resistant na wide range substances chemical od substances corrosive for solvents na base MEK. hose meets requirements hygienic and for contact with food: American FDA 21 CFR 177.1550, nie contains phthalates ani BPA (bisphenol A), is non-toxic, nie leaves smell ani taste. sterilization oxide ethylene. used in various use industrial: flow chemicals, substances pharmaceutical, beverages food, production and packaging paints, solvents and adhesives, for inks and toners, for chemicals photographic, fertilizers and pesticides, in production semiconductors. Length of a full hose roll 15 m. pressure working determined relative to pressure bursting at factor safety 1:5. Material: FEP / PVC special. Maximum operating temperature: +74°C. temperature brittleness: -36°C. Hardness: 66° Shore (A). Density: 1.21 g/cm 3. Note: The product is packaged in the Tubes International Clean Zone (CLEAN ROOM) in compliance with rigorous standards. Return of the product after opening the package is not possible.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery light and flexible hose delivery flat-folding of couplings for water for pumps fire-protection. used is for motor pumps firefighting, rescue and services forest. besides function fire-protection Widely used for conveying water in industry, construction, agriculture and mining. Layer inner smooth, resistant to mould and rotting. Layer outer (braid) o high strength, with coating polyurethane, not taking dirt, increasing resistance to abrasion and contact with flame. certificates: hoses compliant with conditions technical regulation MSWiA with 27.04.2010 r.., hoses of couplings (A complete lines) have certificate approvals CNBOP-PIB. Inner layer: smooth polyurethane. Reinforcement: a polyester braid. Outer layer: red coating polyurethane. Working pressure: from 12 bar to 15 bar - depending on the diameter hose. Operating temperature: od -30°C up to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSilicone hose delivery REDSIL, has versatile use in wide the scope temperatures. uses go both for hot air, as and e.g. in systems cooling. intended for liquids and gases, used in many branches industry between other chemical. Inner layer: transparent silicone. Reinforcement: olpot PET (polyester). Outer layer: red silicone. Hardness: 70° ±5° Shore (A). Operating temperature: od -50°C up to +200°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsElbow silicone 45° reinforced polyester intended is for systems cooling and systems heating in vehicles (water, liquids cooling, air clean or with small amount mist oil). For oils, fuels and oil mist, a version with a fluorosilicone inner layer is recommended. Arm length: 100 mm (also available with arms of length 152, 250 mm). Pressure safety factor: 3:1. The hose meets the SAE J20R1 standards. Hardness (standard version) approx. 65° Shore (A), density approx. 1.26 g/cm³. color layer outer: blue. Material: rubber silicone. Reinforcement: polyester plies. pressure working: od 1.5 bar for 8.33 bar (depending on diameter hose). Operating temperature: from -50°C to +180°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsKnown and proven od lat, light and soft hose with rubber natural o light brown color. easy for installation thanks to its softness (hardness 40° Shore – A), flexible and flexibility (Maximum stretchability 500%). has close properties for latex. resistant na abrasion, o sound resistance na acids and bases. used for liquids and gases, for many applications industrial np. dispensing and dosing soaps and detergents, products alcoholic and milk, laboratories. Sterilization steam 30 min. (1 bar, 141°C) or oxide ethylene. length full roll hose 50 m (od diameter internal 7 mm - 25 m). The given working pressure is determined relative to the bursting pressure at a safety factor of 1:5. Material: rubber natural (NR). temperature use: from -35°C to +70°C (120°C for moist hot). temperature brittleness: -40°C. Hardness: 40° Shore (A). Density: 0.98 g/cm³. Note: The product is packaged in the Tubes International Clean Zone (CLEAN ROOM) in compliance with rigorous standards. Return of the product after opening the package is not possible.
