Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsThick, strong, flexible, resistant to kinking hose delivery designed for conveying hot, dry air of compressor for installation bowl tankers. used in tankers road for transport bulk materials: cement trucks, feed trucks etc. and in other installations industrial. Layer outer resistant to ozone and conditions atmospheric. length standard: 60 m or 120 m. Inner layer: white rubber EPR. Reinforcement: cord synthetic. Outer layer: blue EPDM rubber. Working pressure: 10 bar. Operating temperature: od -40°C up to +200°C (momentarily up to +240°C).- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, very flexible hose for compressed air, o sound resistance to oils mineral. very resistant to abrasion. yellow color ensures excellent visibility hose. hose has thickened layer external co 20 m, marked on hose („TAGLIO / CUT”) and in these places recommended is cutting hose and assembly fittings. then space mounting fittings is reinforced and more resistant to bending. Z roll 60 m can make 3 lines o length 20 m with fittings. possible is however use hose with fittings mounted in places non-thickened. hose used for hammers and drills pneumatic. Inner layer: black blend PVC/NBR. Reinforcement: double polyester braid. Outer layer: black or yellow blend PVC/PU. Working pressure: 20 bar - dependent od temperatures. Operating temperature: od -10°C up to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose delivery for plastering. Layer inner with rubber o sound resistance to abrasion (70±5 mm 3 acc. to ISO 4649 / DIN 53516). The antistatic inner and outer layer prevents the accumulation of electric charges. multiple Reinforcement cord synthetic ensures high strength pressure. Layer outer resistant abrasion, conditions atmospheric and ozone. used for spraying wet mortar: cement, plaster and gypsum in works construction. commonly used for units plastering. Mounted with special plastering ends. hose NIAGARA LIGHT to version economical o slightly thinner wall (marked letter "L" on the end index). length standard: 60 m and 40 m version LIGHT (or 120 m - contact with Tubes International). Inner layer: black rubber SBR/NR. Reinforcement: cord synthetic. Outer layer: black rubber SBR/NR. Working pressure: 40 bar. Operating temperature: od -40°C up to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose delivery for pneumatic conveying dry substances abrasive. special The design hose o exceptional resistance to abrasion. Layer inner smooth, with black antistatic rubber natural with embedded in it balls with corundum (Al 2 O 3 – oxide aluminum), material ceramic o high hardness. built-in cable copper, which po earthing (connection with earthed fitting) discharges charges electrical. Layer outer with black, antistatic (R 6 Ω) rubber SBR / NR resistant to abrasion and aging. hose intended for conveying dry strong abrasive substances: e.g. dry cement, carbon, dust carbon, coke, solid fuels with raw materials secondary, minerals, powders ceramic, shot steel, fragments glass, fibre glass. used in smelters, coking plants, power plants, cement plants, mines, smelters glass, factories materials abrasive and materials insulating. advantage is large service life hose in these use – traditional hose with rubber resistant to abrasion can work e.g. only several dni, a hose ALUSPHERE in these same conditions even several months. Inner layer: balls ceramic embedded in black rubber NR. Reinforcement: cord synthetic. Outer layer: black rubber SBR/NR. Working pressure: 12 bar. Operating temperature: od -30°C up to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose delivery for sandblasting. thick Layer inner with rubber o very sound resistance to abrasion (50±5 mm 3 acc. to ISO 4649 / DIN 53516). The antistatic inner and outer layer prevents the accumulation of electric charges. Used for sand and steel shot in abrasive blast treatment of steel structures, castings, concrete surfaces, etc.. commonly used in industry metal and shipbuilding. Mounted with special sandblasting ends. Standard length: 60 m (or 120 m - contact Tubes International). Inner layer: black rubber NR/SBR. Reinforcement: cord synthetic. Outer layer: black rubber NR/SBR. Working pressure: 12 bar. Operating temperature: od -40°C up to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, smooth, flat rollable hose intended for discharge bulk materials. especially used in installations exposed on vibration and damage mechanical. is suitable for contact with food and in industry pharmaceutical being free of taste and odour, in the scope conformity with requirements FDA (21CFR177.2600). Not is subject to hydrolysis and is resistant to microbes. resistant also on oils mineral, aging, factors atmospheric, ozone, UV and many substances chemical. Hose material: transparent polyurethane. Working pressure: from 0.135 bar to 1.03 bar, depending on the diameter hose. Operating temperature: -40°C up to +90°C (momentarily +125°).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible hose delivery intended for transport products petrochemical o content compounds aromatic up to 50%, fuels, for systems oil, lubrication, etc. Layer outer resistant to action fuels, oils, conditions atmospheric. Inner layer: black NBR rubber. Reinforcement: a synthetic braid. Outer layer: black NBR rubber/PVC. Working pressure: 10 or 20 bar. Operating temperature: od -20°C up to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong hose delivery intended for hot oil in installations hydraulic under pressure up to 40 bar. Layer outer made is with blue rubber synthetic, self-extinguishing (in accordance with requirements MSHA), resistant to conditions atmospheric. Standard length: 60 m (or 120 m - contact Tubes International). Inner layer: black synthetic rubber. Reinforcement: a synthetic braid. Outer layer: blue self-extinguishing synthetic rubber. Working pressure: 40 bar. Operating temperature: od -30°C up to +130°C (momentarily up to +150°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight and flexible hose delivery intended for conveying liquid products industry petrochemical, containing up to 30% compounds aromatic. It has a copper wire ensuring electrical continuity between the hose ends. Layer outer resistant to abrasion, oil and conditions atmospheric. Standard length: 60 m (or 120 m - contact Tubes International). Inner layer: black NBR rubber. Reinforcement: cord synthetic. Outer layer: black synthetic rubber. Working pressure: 10 bar. Operating temperature: od -20°C up to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible hose pressure for oils industrial, mineral, gasoline unleaded (EN 228:2017), oil drive (EN 590:2010), oil heating (DIN 51 603 1÷5). is suitable also for compressed air. Layer inner with black, smooth rubber NBR, antistatic R 6 Ω/m (EN ISO 8031:2009). Reinforcement a braid textile ensures factor safety 3.15 : 1. resistant to small vacuum for ok. 0.5 bar. Layer outer with black, smooth blend rubber NBR / EPDM resistant to oil, ozone, abrasion and conditions atmospheric. Inner layer: black NBR rubber. Reinforcement: textile braid. Outer layer: black NBR rubber/EPDM. Working pressure: 25 bar. Operating temperature: od -40°C up to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible, soft hose rubber with external a braid of galvanized steel, intended for gasoline and oils petroleum-based such as e.g. oil drive, heating, lubricating. mounted in installations fuel and oil small vehicles and equipment industrial. It can also be used for water, cooling liquids, non-oxidising detergents, air. Based on the requirements of the DIN 73379 standard. Layer inner with smooth, black rubber NBR. The external reinforcing braid of galvanized steel provides high pressure resistance. W braid black band marking. The maximum working temperature depends on the medium: for petrol, unleaded petrol, fuels up to 50% aromatic hydrocarbon content: +40°C; for diesel oil (diesel): +80°C; for water and cooling liquids based on ethylene glycol: +90°C; for air: +80°C; for liquid, non-oxidising detergents: +80°C. Hose material: black NBR rubber. Reinforcement: external braid wire of galvanized steel. Working pressure: from 10 bar to 20 bar, dependent od diameter hose. Operating temperature: od -35°C up to +80°C (Maximum temperature dependent od medium).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible, soft hose rubber with external a braid textile, intended primarily for installations fuel gasoline leaded and unleaded and oil drive small vehicles (cars, motorcycles, mopeds, tractors garden) or equipment industrial. mounted e.g. between pump fuels a carburettor. Not is suitable for engines with system injection fuels. It can also be used for water, cooling liquids, non-oxidising detergents, air. Based on the requirements of the DIN 73379 standard type B (03/1982). Layer inner with smooth, black rubber NBR. The external braid vulcanised with rubber reinforces the hose and protects against contact with hot element. The maximum working temperature depends on the medium: for petrol, unleaded petrol, fuels up to 50% aromatic hydrocarbon content: +40°C; for diesel oil (diesel): +80°C; for water and cooling liquids based on ethylene glycol: +90°C; for air: +80°C; for liquid, non-oxidising detergents: +80°C. Hose material: black NBR rubber. Reinforcement: external black textile braid. Working pressure: 10 bar. Operating temperature: od -35°C up to +120°C (momentarily), Maximum temperature use dependent od medium.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery pliable and flexible hose for gasoline unleaded and oil drive cars passenger, trucks and tractors. It can be used in compartment engine trucks. Layer inner with black, smooth rubber NBR highly resistant to fuel (resistance to oil: RMA class A), suitable for use with greater fuels automotive (standard oil drive B7 (EN590:2017), biodiesel B20, B100, standard gasoline unleaded E5 (EN228:2017), E10, E85 and E100 - 100% ethanol). Reinforcement strength a braid textile ensures Safety factor 4:1. Layer outer with black, smooth, high quality rubber synthetic resistant to oil, ozone and conditions atmospheric. commonly used hose fuel for vehicles automotive. compliant with standards SAE J30R2 and SAE J30 R6. Inner layer: NBR rubber. Reinforcement: textile braid. Outer layer: black synthetic rubber. Working pressure: 12 bar. Operating temperature: od -40°C up to +100°C externally up to +120°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible hose rubber CODAN 3106 intended for gasoline leaded and unleaded. used for connections e.g. carburettor with pump fuels in cars, motorcycles, mopeds, tractors garden, etc. Not is suitable for engines with system injection. Based on the requirements of the DIN 73379 standard type B (03/1982). Layer inner with smooth, black blend rubber NBR / PVC. The external braid vulcanised with rubber reinforces the hose and protects against contact with hot element. It can also be used for water, cooling liquids, non-oxidising detergents, air. The maximum working temperature depends on the medium: for water and cooling liquids based on ethylene glycol: +90°C, for air: +80°C, for liquid, non-oxidising detergents: +80°C, for diesel oil (diesel): +80°C, for petrol, unleaded petrol, fuels up to 50% aromatic hydrocarbon content: +40°C. Hose material: black NBR rubber/PVC. Reinforcement: external textile braid (black polyester). Working pressure: from 5 bar to 13 bar, depending on the diameter hose. Operating temperature: od -30°C up to +100°C (momentarily), Maximum temperature use dependent od medium.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh quality, multilayer hose fuel, Based on the requirements of the DIN 73379-3E standard (11/97). design: Layer inner with resistant chemical and temperature-wise Viton (FPM), Layer intermediate with epichlorohydrin (ECO), resistant to temperature and strength braid with fibers aramid, Layer outer with epichlorohydrin (ECO) – resistant to temperature, ozone, microcracks. Layer inner made of Viton ensures excellent resistance chemical on action hydrocarbons, products petrochemical a also many aggressive substances chemical and additives used for fuels, also in elevated temperatures use. especially recommended for biofuels based on esters methyl acids fatty (FAME) e.g. biodiesel B10, B20, B100. resistant to ester methyl acids fatty oil rapeseed (RME). It can be used for biopetrols containing alcohol ethyl e.g. E10, E100. resistant to esters phosphate (consists ofce also additives for fuels liquid). It can be used also for ordinary oil drive, gasoline, oils mineral. recommended for demanding applications under relative to high cleanliness fuels, resistance to temperature and aging. is characterized low permeability hydrocarbons through wall hose. Inner layer: rubber FPM (Viton). Intermediate layer: rubber epichlorohydrin (ECO). Reinforcement: textile braid aramid. Outer layer: rubber epichlorohydrin (ECO). Working pressure: 10 bar. Operating temperature: od -40°C up to +125°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible, soft hose rubber with external a braid of galvanized steel, intended for gasoline and oils petroleum-based such as e.g. oil gear, heating, drive. mounted in installations fuel and oil small vehicles and equipment industrial. It can also be used for water, cooling liquids, non-oxidising detergents, air. Based on the requirements of the DIN 73379 standard. Layer inner with smooth, black rubber NBR. The external reinforcing braid of galvanized steel provides high pressure resistance. Hose material: black NBR rubber. Reinforcement: external braid wire of galvanized steel. Working pressure: from 6 bar to 25 bar - depending on the diameter hose. Operating temperature: od -35°C up to +90°C (momentarily 110°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose of special blend PVC intended for oils, fuels and other products petrochemical based on hydrocarbons. Material hose has elevated resistance to leaching plasticisers and retains its flexibility even po long use. withstands repeated bending, a simultaneously exhibits excellent resistance to aging. intended for installations fuel: pumps, burners, equipment heating, installations oil. Not is suitable for hydrocarbons aromatic (benzene, toluene, xylene etc.). Not recommended for gasoline, in particular for intensive use or more demanding applications (in such case consider hose TECHNOBEL PU). It can be used for some products chemical: diluted acids, bases and alcohols. smooth surface inner and outer hose and translucent wall enable visual control flow. used widely in industry automotive, assembly shops, industry plastics, industry wood, workshops automotive, agriculture, forestry and services municipal. Inner layer: greenish transparent PVC. Reinforcement: a synthetic braid. Outer layer: greenish transparent PVC. Working pressure: from 8 bar to 13 bar, depending on the diameter hose. Operating temperature: od -15°C up to +60°C (working pressure depends on temperature).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, extremely flexible and pliable, o small radius bends hose, PVC with inner layer with polyurethane (PU, polyester-polyurethane). thanks to sound resistance chemical polyurethane hose It can be used for gasoline, gasoline unleaded, oils, products petroleum-based and many solvents. is suitable for compressed air, also air oiled. Due to good resistance polyurethane on abrasion can be also used for conveying average abrasive powders or granulates. Not is whereas recommended for acids, bases and solutions water at temperatures above 40ºC. Not is suitable for hydrocarbons aromatic (benzene, toluene, xylene etc.). hose widely used we all fields industry. used also in agriculture for spraying agricultural (agents insecticides, pesticides, agents herbicides etc.). used for compressed air for tools pneumatic, guns for spraying, painting, sandblasting etc. Layer outer resistant to carbon and solvents in the molds mist with spraying. is suitable for mounting on drums. Inner layer: transparent polyurethane (PU). Reinforcement: a polyester braid. Outer layer: black PVC. Working pressure: from 12 bar to 20 bar, dependent od diameter hose and temperatures. Operating temperature: od -15°C up to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible hose with connections intended for fittings sanitary (heat and cold water). Widely used for connections in installations industrial, central heating and air-conditioning. resistant to action glycol o a concentration up to 35%. the connection made with brass, ferrules of steel stainless (AISI 304). has certificate hygienic and approval technical for use in construction. Available on both sides with a female BSP thread and with a thread internal and external BSP. Inner layer: black EPDM rubber (o elevated parameters). Reinforcement: external braid of steel AISI 304. Working pressure: 16 bar. Operating temperature: up to +110°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose intended for water and non-corrosive media. used for installation sanitary, boilers, systems cooling. woven in in braid two red stripes inform o resistance hose on elevated temperature medium. Inner layer: non-toxic EPDM rubber. Reinforcement: braid of galvanized steel. Working pressure: from 6 bar to 15 bar, depending od diameter hose. Operating temperature: od -10°C up to +110°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose rubber reinforced a braid of galvanized steel ensuring high resistance pressure, perfectly works in installations oil small vehicles, installations fuel and equipment industrial. intended for gasoline and oils petroleum-based such as e.g. oil gear, heating czy drive. Layer inner made with rubber NBR in connection with a braid in the molds mesh (braid), make that hose is simultaneously soft and flexible. The maximum working temperature depends on the medium: for petrol, unleaded petrol, fuels up to 50% aromatic hydrocarbon content: +40°C; for diesel oil (diesel): +80°C; for water and cooling liquids based on ethylene glycol: +90°C; for air: +80°C; for liquid, non-oxidising detergents: +80°C. Inner layer: smooth, black NBR rubber. Reinforcement: external braid wire of galvanized steel. Working pressure: from 20 bar to 25 bar - depending on the diameter hose. Operating temperature: od -35°C up to +90°C (Maximum temperature use dependent od medium).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible hose intended for conveying under higher pressure oils industrial, mineral, oil drive (EN 590:2010), biodiesel and oil heating (DIN 51 603 1÷5). is suitable also for compressed air, liquids cooling based on glycol. Layer inner with black, smooth rubber NBR, antistatic R 6 Ω/m (EN ISO 8031:2009). Reinforcement strength a braid textile ensures factor safety 4 : 1. resistant to small vacuum for ok. 0.6 bar. Layer outer with black, smooth rubber SBR / NVC (NVC - blend NBR and PVC) is resistant to oil, ozone and conditions atmospheric. Inner layer: black NBR rubber. Reinforcement: a polyester braid. Outer layer: black rubber SBR/NVC. Working pressure: 40 bar. Operating temperature: od -45°C up to +100°C for fuels and oils, od -45°C up to +70°C for air.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSoft, flexible, extruded hose delivery for conveying gasoline and oil drive at low pressure, fire-resistant, for small vessels - recreational boats up to 24 m long. Intended for fuel systems of stationary engines on ships, motorboats, yachts etc.. Suitable for unleaded petrol, petrol with up to 10% ethanol added (E10 petrol), diesel oil and diesel oil with 10% FAME esters added (B10 – biodiesel). Compliant with ISO 7840 type A1 (fireproof, fuel vapour permeability less than or equal to 100 g/m2/24 h), compliant with directive 94/25/EC, RINA certified, compliant with SAE 1527, USCG type A1. Layer inner with black, seamless rubber synthetic, resistant to oils and fuels up to 50% content hydrocarbons aromatic. Reinforcement synthetic a braid textile. Layer outer with black, resistant to fire, seamless rubber synthetic, resistant to aging, greases, conditions atmospheric and temperature (resistance to fire: ISO 7840 Annex A: hose filled fuel should withstand flame through 2.5 min). Inner layer: black synthetic rubber. Reinforcement: a synthetic braid. Outer layer: black synthetic rubber. Working pressure: from 2.5 bar to 3.4 bar - depending on the diameter hose. Operating temperature: od -20°C up to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA very strong delivery hose for aviation fuel, intended for direct pressurised refuelling of aircraft. It can also be used in fuel transfer operations in airport tankers – dispensers, in cases not requiring high vacuum. designed specially for kerosene (kerosene aviation - fuel for turbine engines aviation e.g. JET A1), gasoline aviation and fuels o content hydrocarbons aromatic up to 50%. It can be used on reels drum. Layer inner with black, smooth, antistatic rubber NBR. Reinforcement layers high-strength cord synthetic. Layer outer with black, antistatic, self-extinguishing rubber chloroprene (CR), resistant to abrasion, contact with carbon, conditions weather. The antistatic outer layer, in accordance with EN ISO 1825, provides the required low line resistance between the ends (10 3 Ω ‹ R ‹ 10 6 Ω, ISO 8031). Compliant with the requirements for aviation fuel hoses (type C/Ω) EN ISO 1825, EN 1361, BS 3158, EI 1529. Inner layer: black NBR rubber. Reinforcement: cord synthetic. Outer layer: black rubber CR. Working pressure: 20 bar. Operating temperature: od -30°C up to +70°C (for fuels aviation acc. to EN 1825).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible, soft hose rubber with external a braid of steel stainless, intended for gasoline and oils petroleum-based such as e.g. oil drive, heating, lubricating. mounted in installations fuel and oil small vehicles and equipment industrial. It can also be used for water, cooling liquids, non-oxidising detergents, air. Based on the requirements of the DIN 73379 standard. Layer inner with smooth, black rubber NBR. The external reinforcing braid of stainless steel provides high pressure resistance and is resistant to corrosion. The maximum working temperature depends on the medium: for petrol, unleaded petrol, fuels up to 50% aromatic hydrocarbon content: +40ºC; for diesel oil (diesel): +80ºC; for water and cooling liquids based on ethylene glycol: +90ºC; for air: +80ºC; for liquid, non-oxidising detergents: +80ºC. Inner layer: black NBR rubber. Reinforcement: external braid wire of steel stainless AISI 304. Working pressure: from 10 bar to 20 bar - depending on the diameter hose. Operating temperature: od -35°C up to +80°C (Maximum temperature use dependent od medium).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong, resistant to abrasion hose delivery for designed specially for conveying fuels, other liquid hydrocarbons or for use as hose antistatic general purpose. lighter and more flexible than standard hoses rubber, has buoyancy (stays on surface) in water fresh and salt. flat at rest, co facilitates operation and storage. intended for conveying and handling products petrochemical, oils and fuels in refineries, industry and transport. used for refuelling vessels, cleaning tanks, applications firefighting and military. Meets the requirements of standards MIL-PRF-370J for hoses for fuels liquid. antistatic - has two externally longitudinally arranged copper cable ensuring continuity electrical between fitting hose easily available for correct connection for ends (R ‹ 0.02 Ω/m, Exceeds the requirements of standards MIL-PRF-370J). inner surface hose smooth, not causing losses flow. resistant to abrasion, conditions atmospheric, hydrolysis, ozone, fuels and commonly used chemicals (recommended range pH: 5 ÷ 9). resistant to loads longitudinal during unwinding and pulling. Hose material: polyurethane (PUR) pressed in braid in process extrusion hose. Working pressure: from 7 bar to 11 bar - depending on the diameter hose (given pressure working for fuels). Operating temperature: od-50°C up to +50°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight hose smooth with PTFE o properties antistatic and excellent resistance chemical. properties conducting and dissipation charges electric obtained are through additive for 2.5% carbon - carbon black (carbon black) – PTFE AS. allows to na reduction resistance material hose and meeting requirements standards EN12115 demanding resistance between ends hose smaller od 10 6 Ω/m. hose intended is in particular for aggressive chemical substances non-conductive np. solvents organic, which flow in standard hose PTFE can cause accumulation charges electric and related with this hazard. high cleanliness and distribution additives carbon in PTFE ensures compliance with FDA 21 CFR 178.3297 in the scope materials approved for time contact with food. Flame-retardant (UL94 V-0) and with a high oxygen index (LOI). use high quality fittings push-in is possible. factor safety n=4:1. pressure bursting and working hose, decreases in temperature use above 20°C and is dependent od jej the height. Material: antistatic PTFE (teflon), black. hardness Shore (D): 60. pressure working: od 5.5 up to 12 bar. temperature use: from -200°C to +260°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsElbow 45° RADIATOR intended for systems cooling engine in vehicles and engines type automotive (for water, liquids cooling na base glycol ethylene). Meets the requirements of the SAE J20 R4 Class D-1 standard. available with arms o length 200, 250 and 300 mm. pressure working: od 0.6 bar for 4.1 bar, depending on diameter elbow. Operating temperature: from -40°C to +125°C. Safety factor (bursting pressure / maximum working pressure) 3:1. Material a connector: black rubber EPDM. Reinforcement: textile braid.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsElbow silicone 135° reinforced polyester intended is for systems cooling and systems heating in vehicles (water, liquids cooling, air clean or with small amount mist oil). For oils, fuels and oil mist, a version with a fluorosilicone inner layer is recommended. Standard arm length: 102 mm. Pressure safety factor: 3:1. The hose meets the SAE J20R1 standards. Hardness (standard version) approx. 65° Shore (A), density approx. 1.26 g/cm³. color layer outer: blue. Material: rubber silicone. Reinforcement: polyester plies. pressure working: od 2 bar for 8.12 bar (depending on diameter hose). Operating temperature: from -50°C to +180°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA strong delivery hose intended for unleaded petrol, diesel oil and liquid fuels containing up to 50% aromatic compounds. Used in industry and transport for conveying and handling petrochemical products, in road tankers, at road and rail fuel unloading and loading terminals. Layer inner with black, smooth, antistatic (R ≤ 10 6 Ω) rubber NBR (NBR1). Reinforcement layers high-strength cord. It has two copper wires ensuring electrical continuity between the hose ends – provided they are correctly connected to the ends. Layer outer with black, antistatic (R ≤ 10 6 Ω) rubber synthetic, self-extinguishing, resistant to abrasion, oil, ozone and conditions atmospheric. Resistance through the hose wall R ≤ 10 9 Ω (type M/T). compliant with standards EN12115:11 (16 bar), EN 1761(10 bar), ISO 2929 (10 bar), TRbF. excellent resistance to action products petrochemical, strong The design and properties antistatic both layer internal and outer, built-in cable antistatic, recommend this hose for demanding applications, also in explosion-hazard zones. In every case, however, use in an explosion-hazard zone (ATEX) should be preceded by a risk analysis carried out by a specialist. A version without a wire (type Ω/T) is available on special order. Inner layer: black, smooth NBR rubber. Reinforcement: cord synthetic. Outer layer: black synthetic rubber. Working pressure: 16 bar. Operating temperature: od -30°C up to +90°C (momentarily up to +110°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong hose, PVC general use, o specially reinforced the structure wall and braid. O sound resistance to kinking. intended for water, air, light chemicals in agriculture, horticulture and industry. Inner layer: black PVC. Reinforcement: a polyester braid. Outer layer: yellow PVC. Working pressure at a temperature of 20°C: 10 bar. Operating temperature: from -5°C to +60°C. As the working temperature rises, the hose's working pressure value decreases.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong hose delivery for oils and fuels. lighter and more flexible than standard hoses rubber. flat at rest, co facilitates operation and storage. intended for conveying and handling products petrochemical, oils and fuels in refineries, industry and transport. used for refuelling vessels, cleaning tanks, applications firefighting and military. hose built is with high-strength braid polyester – polyamide, completely pressed in blend NBR/PVC. has copper cable ensuring continuity electrical between fitting hose – under a condition correct connection for ends. inner surface hose with NBR/PVC smooth, not causing losses flow, outer surface with NBR/PVC lightly longitudinally ribbed, co serves increasing resistance to abrasion and protection against contact with hot element. resistant externally on abrasion, ozone, conditions atmospheric, oil, fuels and wide range chemicals. Not requires cleaning and drying. resistant to loads longitudinal – during unwinding and pulling (force longitudinal not should never exceed 1/3 given force breaking, assembly ends should take into account force longitudinal). standard color green-grey (army green). Hose material: green-grey blend NBR/PVC pressed in braid polyester-polyamide in process extrusion hose. Working pressure: od 16 up to 20 bar - depending on the diameter a hose. Operating temperature: od -20°C up to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsRubber formed hose without reinforcement, flexible and stretchable (na diameter) o special serrated shape, ensuring resistance na kinking at bending and possibility cutting na sections o required length. manufactured in sections o length 1 m, which can cut and easily molds in installation. Available in version basic, made with rubber EPDM, for water, liquids cooling, resistant na diluted acids and principles, na elevated temperature and ozone. Range temperatures use from -40°C to +135°C (TUBANO) and in version o elevated resistance outer na oil, made with other rubber synthetic. Range temperatures use from -30°C to +120°C (TUBANO OIL). Material hose: formed rubber EPDM. pressure working: 1.5 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA universal flexible rubber hose delivery, intended for air, cold and hot water and light chemicals (with the exception acids). resistant to acetates and ketones. It can be used for dispersion water paints epoxy and polyurethane. Not is suitable for oils, fuels, hydrocarbons aromatic, paints cellulose, chlorinated-rubber and other containing solvents aromatic (np. toluene, xylene) or gasoline. When selecting for chemical applications we recommend contacting Tubes International. hose o strong the structure and small elongation pod pressure. is suitable for use on drums. Layer inner electrically conductive (R 6 Ω, EN ISO 8031), Layer outer resistant to ozone and conditions atmospheric. Inner layer: black EPDM rubber. Reinforcement: textile braid (PVA - alcohol polyvinyl). Outer layer: black EPDM rubber. Working pressure: 20 bar. Operating temperature: from -40°C to +95°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose intended for equipment for pressure washing hot water. Layer outer resistant to abrasion, oils and fats animal. large flexibility facilitates operation operator. Inner layer: black NBR rubber. Reinforcement: a single textile braid, a single steel braid or a double steel braid. Outer layer: yellow blend Carbryn®/NBR. Working pressure: 103 bar (for hose o nominal diameter internal DN12 - 83 bar), 206 bar or 310 bar, depending on type hose. Operating temperature: od -30°C up to +93°C (for hose with one a braid textile), od -30°C up to +120°C, other.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose delivery for cleaning dry ice – granulate solidified dioxide carbon. cleaning dry ice used is for removing coatings, adhesives, deposits etc. in many fields industry. advantage process is no damage cleaned surface, no aggressive substances chemical, no water in process (in comparison for cleaning high-pressure water), no residue abrasive (in comparison with sandblasting). dry ice (solidified dioxide carbon) has temperature for -78.5°C (temperature melting), moulds granulate and in during process sublimates for the molds gas. hose DRY ICE designed is specially for conveying dry ice. Layer inner smooth, with antistatic rubber synthetic resistant to abrasion and low temperature. Layer outer antistatic, resistant to abrasion, conditions atmospheric and ozone. mounted with use quick couplings of specialist guns for cleaning dry ice. Inner layer: black synthetic rubber. Reinforcement: cord synthetic. Outer layer: black synthetic rubber. Working pressure: 10 bar. Operating temperature: od -55°C up to +130°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose intended for pressure cleaning water sewers. standard length: 80, 100, 120, 150, 180, 200, 250 m. Inner layer: thermoplastic polyester. Reinforcement: double polyester braid. Outer layer: orange for JC 7 and red for JC 8 polyurethane, resistant to abrasion. Working pressure: from 200 bar to 345 bar (depending on the diameter and kinds hose). Operating temperature: od -40°C up to +55°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose delivery intended for high-pressure washing and flushing systems sewer. Layer outer resistant to abrasion, mist oil and conditions atmospheric. produced in accordance with the standard EN ISO 1307. Inner layer: black, smooth synthetic rubber. Reinforcement: double textile braid. Outer layer: black, smooth synthetic rubber. Working pressure: 250 bar. Operating temperature: od -40°C up to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose delivery o smaller diameters intended for conveying wine, juices fruit, beer, water. It can be used for hose reels drum. completely free of components origin animal, phthalates, plasticisers and nitrosamines. highly resistant to processes cleaning and disinfection used in industry food. Layer inner free of taste and odour. Layer outer resistant to abrasion and aging. standards and requirements : industry food, contact with food 1935/2004/EC, 2023/2006/EC (GMP). Layer inner compliant with FDA, D.M. 21/03/73, BfR II. Inner layer: white smooth technopolymer. Reinforcement: a synthetic braid. Outer layer: blue smooth technopolymer. Working pressure: 10 bar. Operating temperature: -20°C up to +80°C (momentarily up to +90°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsNon-staining, resistant to abrasion, oils and fats, high quality hose FORTRESS®. thanks to outer, antibacterial coating Microban® and high flexibility, found wide use in equipment washing in industry cosmetic, food, pharmaceutical, etc. Inner layer: black NBR rubber. Reinforcement: a single textile braid or a single steel braid. Outer layer: yellow rubber Carbryn® secured coating Microban®. Working pressure: 69 bar or 207, depending on type hose. Operating temperature: od -30°C up to +93°C or od -30°C up to +120°C, depending on type hose.
