Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible hose designed for hydraulic oil installations, fuels, water-based fluids. Available on request in micro-perforated version (for gases and air). Inner layer: polyester. Reinforcement: polyester braid. Outer layer: polyurethane. Working pressure: from 80 bar to 200 bar, depending on hose diameter. Operating temperature: from -40°C to +100°C (for water and air up to +70°C).- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible hose with conductive fibers in the braid (R<3x104 Ω/m) designed for solvents, paints, isocyanates, polyols, water-based fluids. Standards: ISO 8031, SAE 100R7, EN855-R7, ISO 3949-R7. Inner layer: polyamide. Reinforcement: double polyester braid with conductive fibers. Outer layer: microperforated polyurethane. Operating temperature: from -40°C to +100°C (for water and air up to +70°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible hose designed for solvents, paints, isocyanates, polyols, and water-based fluids. Also available in a microperforated version (for gases and air), marked with the letters "MP" at the end of the index. Inner layer: polyamide. Reinforcement: steel braid. Outer layer: polyurethane. Working pressure: from 70 bar to 375 bar - depending on the diameter. Operating temperature: from -40°C to +100°C (for water and air up to +70°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible hose designed for hydraulic oil installations, fuels, water-based fluids. For use near transformers and medium and high voltage electrical installations. Non-conductive - leakage during testing according to standards less than 50 µA for a voltage of 246 kV/m for 5 minutes. Standards: ANSI 92.2, SAE 100R7, ISO 3949-R7. Inner layer: polyester. Reinforcement: double polyester braid. Outer layer: orange polyurethane. Working pressure: from 70 bar to 230 bar, depending on hose diameter. Operating temperature: from -40°C to +100°C (for water up to +70°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible hose designed for hydraulic oil installations, gases, air, fuels, water-based fluids. Standards: DIN 24951, SAE 100R7, ISO 3949-R7. Inner layer: polyester. Reinforcement: double polyester braid. Outer layer: micro-perforated polyurethane. Working pressure: from 77 bar to 235 bar, depending on hose diameter. Operating temperature: from -40°C to +93°C (for water and air up to +65°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsNon-conductive hose - leakage during testing according to SAE 100 R8 standard less than 50 µA at a voltage of 246 kV/m for 5 minutes, used near electrical installations. Inner layer: polyester. Reinforcement: two aramid braids. Outer layer: orange polyurethane. Working pressure: 700 bar. Operating temperature: from -40°C to +100°C (for water and water-based fluids max. up to +65°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible hose designed for hydraulic oil installations, gases, air, fuels, water-based fluids. Standards: SAE 100R8, ISO 3949-R8 (except DN8). Inner layer: polyester. Reinforcement: double aramid braid. Outer layer: micro-perforated polyurethane. Working pressure: from 140 bar to 362 bar, depending on hose diameter. Operating temperature: from -40°C to +93°C (for water and air up to +65°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible hose designed for solvents, paints, isocyanates, polyols, gases, air, water-based fluids. Standards: DIN 24951, SAE 100R7, ISO 3949-R7. Inner layer: polyamide. Reinforcement: double polyester braid. Outer layer: microperforated polyurethane. Operating temperature: from -40°C to +93°C (for water and air up to +65°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible hose designed for hydraulic oil installations, gases, air, fuels, water-based fluids. Inner layer: polyester. Reinforcement: aramid braid + steel braid. Outer layer: micro-perforated polyurethane. Working pressure: from 175 bar to 500 bar, depending on hose diameter. Operating temperature: from -40°C to +93°C (for water and air up to +65°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible hose designed for solvents, paints, isocyanates, polyols, gases, air, water-based fluids. Standards: SAE 100R7, ISO 3949-R7. Inner layer: polyamide. Reinforcement: double polyester braid. Outer layer: micro-perforated polyurethane. Operating temperature: from -40°C to +100°C (for water and air up to +70°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible hose designed for hydraulic oil installations, gases, air, fuels, water-based fluids. Standards: SAE 100R8, ISO 3949-R8. Inner layer: polyester. Reinforcement: double aramid braid. Outer layer: micro-perforated polyurethane. Working pressure: from 145 bar to 420 bar, depending on hose diameter. Operating temperature: from -40°C to +100°C (for water and air up to +70°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible hose designed for hydraulic oil installations, gases, air, fuels, water-based fluids. Standards: SAE 100R7, ISO 3949-R7. Inner layer: polyester. Reinforcement: double polyester braid. Outer layer: micro-perforated polyurethane. Working pressure: from 70 bar to 230 bar, depending on hose diameter. Operating temperature: from -40°C to +100°C (for water and air up to +70°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible hose in a double version (two hoses with a welded outer layer) designed for hydraulic oil installations, gases, air, fuels, water-based fluids. Standards: SAE 100R7, ISO 3949-R7. Inner layer: polyester. Reinforcement: double polyester braid. Outer layer: micro-perforated polyurethane. Working pressure: from 140 bar to 210 bar, depending on the hose diameter. Operating temperature: from -40°C to +100°C (for water and air up to +70°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible hose designed for solvents, paints, isocyanates, polyols, gases, air, water-based fluids. Inner layer: polyamide. Reinforcement: steel braid. Outer layer: microperforated polyurethane. Operating temperature: from -40°C to +93°C (for water and air up to +65°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible hose designed for solvents, paints, isocyanates, polyols, water-based fluids. Micro-perforated on request (for gases and air). Inner layer: polyamide. Reinforcement: double steel braid. Outer layer: polyurethane. Operating temperature: from -40°C to +100°C (for water and air up to +70°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible hose in a double version (two hoses with a welded outer layer) designed for hydraulic oil installations, gases, air, fuels, water-based fluids. Standards: DIN 24951, SAE 100R7, ISO 3949-R7. Outer layer: micro-perforated polyurethane. Working pressure: from 157 bar to 215 bar, depending on the hose diameter. Operating temperature: from -40°C to +93°C (for water and air up to +65°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible, antistatic (R<3x104 Ω/m) hose designed for solvents, paints, isocyanates, polyols, gases, air, water-based fluids. Standards: ISO 8031, SAE 100R8, ISO 3949-R8. Inner layer: polyamide. Reinforcement: double aramid braid with conductive fibers. Outer layer: microperforated polyurethane. Operating temperature: from -40°C to +100°C (for water and air up to +70°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose intended for filling gas cylinders. Odorless inner layer compliant with FDA 21 CFR requirements, Directive 2011/10/EU, and CGA G-7.1-2004 (for breathing air). Not to be used for explosive gases, e.g., oxygen, hydrogen. Installation: use fittings type Z. Inner layer: polyester. Reinforcement: aramid braid. Outer layer: microperforated polyurethane. Operating temperature: from -40°C to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible hose designed for hydraulic oil installations, fuels, water-based fluids. Available on request in micro-perforated version (for gases and air). Inner layer: polyester. Reinforcement: steel braid. Outer layer: polyurethane. Working pressure: from 70 bar to 325 bar, depending on hose diameter. Operating temperature: from -40°C to +100°C (for water and air up to +70°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible hose designed for hydraulic oil installations, fuels, water-based fluids. For use near transformers and medium and high voltage electrical installations. Non-conductive - leakage during testing according to standards less than 50 µA for voltage 246 kV/m for 5 minutes. Standards: DIN 24951, SAE 100R7, ISO 3949-R7. Inner layer: polyester. Reinforcement: double polyester braid. Outer layer: orange polyurethane. Working pressure: from 157 bar to 220 bar, depending on hose diameter. Operating temperature: from -40°C to +93°C (for water up to +65°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible hose designed for hydraulic oil installations, gases, air, fuels, water-based fluids. Inner layer: polyester. Reinforcement: polyester braid. Outer layer: micro-perforated polyurethane. Working pressure: from 110 bar to 130 bar, depending on the hose diameter. Operating temperature: from -40°C to +93°C (for water and air up to +65°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose intended for CO2 installation in industrial and marine fire protection systems. Resistant to very low temperatures. Inner layer: polyester. Reinforcement: steel braid. Outer layer: microperforated polyurethane. Operating temperature: from -60°C to +93°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible hose designed for hydraulic oil installations, gases, air, fuels, water-based fluids. Standards: SAE 100R7, EN855-R7, ISO 3949-R7. Inner layer: polyester. Reinforcement: one or two synthetic braids. Outer layer: micro-perforated polyurethane. Working pressure: from 70 bar to 210 bar, depending on hose diameter. Operating temperature: from -40°C to +100°C (for water and air up to +70°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible hose in a double version (two hoses with a welded outer layer) designed for hydraulic oil installations, fuels, and water-based fluids. Available on request in micro-perforated form (for gases and air). Inner layer: polyester. Reinforcement: steel braid. Outer layer: polyurethane. Working pressure: from 190 bar to 325 bar, depending on the hose diameter. Operating temperature: from -40°C to +100°C (for water and air up to +70°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible hose designed for hydraulic oil installations, gases, air, fuels, water-based fluids. Standards: SAE 100R18, ISO 3949-R18. Installation: use fittings type Z. Inner layer: polyester. Reinforcement: double polyester braid. Outer layer: polyurethane. Working pressure: from 210 bar to 250 bar, depending on hose diameter. Operating temperature: from -40°C to +100°C (for water and air up to +70°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible hose designed for solvents, paints, isocyanates, polyols, gases, air, and water-based fluids. Inner layer: polyamide. Reinforcement: aramid braid + steel braid. Outer layer: microperforated polyurethane. Operating temperature: from -40°C to +93°C (for water and air up to +65°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible hose designed for hydraulic oil installations, gases, air, fuels, water-based fluids. Resistant to very low temperatures and harsh weather conditions. Standards: SAE 100R18, ISO 3949-R18. Inner layer: polyester. Reinforcement: one or two synthetic braids. Outer layer: micro-perforated polyurethane. Working pressure: 210 bar. Operating temperature: from -55°C to +100°C (for water and air up to +70°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible hose designed for hydraulic oil installations, fuels, water-based fluids. Available on request in micro-perforated version (for gases and air). Installation: contact TUBES INTERNATIONAL®. Inner layer: polyester. Reinforcement: aramid braid + steel braid. Outer layer: polyurethane. Working pressure: from 200 bar to 425 bar - depending on hose diameter. Operating temperature: from -40°C to +100°C (for water and air up to +70°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible hose in a double version (two hoses with a welded outer layer) designed for hydraulic oil installations, gases, air, fuels, water-based fluids. Inner layer: polyester. Reinforcement: steel braid. Outer layer: micro-perforated polyurethane. Working pressure: from 180 bar to 300 bar, depending on the hose diameter. Operating temperature: from -40°C to +93°C (for water and air up to +65°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible hose in a double version (two hoses with a welded outer layer) designed for hydraulic oil installations, gases, air, fuels, water-based fluids. Standards: SAE 100R8, ISO 3949-R8. Inner layer: polyester. Reinforcement: double aramid braid. Outer layer: micro-perforated polyurethane. Working pressure: from 250 bar to 362 bar, depending on the hose diameter. Operating temperature: from -40°C to +93°C (for water and air up to +65°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible hose in a double version (two hoses with a welded outer layer) designed for hydraulic oil installations, gases, air, fuels, water-based fluids. Standards: SAE 100R8, ISO 3949-R8. Inner layer: polyester. Reinforcement: double aramid braid. Outer layer: micro-perforated polyurethane. Working pressure: from 245 bar to 350 bar, depending on the hose diameter. Operating temperature: from -40°C to +100°C (for water and air up to +70°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAntistatic hose (R < 3x104 Ω/m) designed for the transmission of non-conductive media. Inner layer: polyamide. Reinforcement: two aramid braids. Outer layer: blue polyurethane. Working pressure: 700 bar. Operating temperature: from -40°C to +100°C (for water and water-based fluids max. up to +65°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose designed for the transfer of aggressive chemical substances such as paints and solvents. Inner layer: polyamide. Reinforcement: aramid braid + steel braid. Outer layer: black polyurethane. Working pressure: 700 bar. Operating temperature: from -40°C to +100°C (for water and water-based fluids max. up to +65°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose designed for high-pressure hydraulic systems. Inner layer: polyester. Reinforcement: aramid braid + steel braid (UH-OL8M-06 - hose reinforcement consists of two aramid braids). Outer layer: black polyurethane. Working pressure: 700 bar. Operating temperature: from -40°C to +100°C (for water and water-based fluids max. up to +65°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDouble hose consisting of two strands of STANDARD type hose. Inner layer: polyester. Reinforcement: aramid braid + steel braid. Outer layer: black polyurethane. Working pressure: 700 bar. Operating temperature: from -40°C to +100°C (for water and water-based fluids max. up to +65°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible, antistatic (R<1.2x105 Ω/m) hose designed for natural gas (CNG - Compressed Natural Gas). Used for filling tanks of vehicles powered by CNG. Standards: ISO 8031, ISO 15500-17. Inner layer: conductive polyamide. Reinforcement: aramid braiding. Outer layer: microperforated polyurethane. Operating temperature: from -40°C to +82°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible hose designed for solvents, paints, isocyanates, polyols, and water-based fluids. Resistant to seawater. Micro-perforated on request (for gases and air). Installation: contact TUBES INTERNATIONAL®. Inner layer: polyamide. Reinforcement: aramid braid + steel braid. Outer layer: polyurethane. Operating temperature: from -40°C to +100°C (for water and air up to +70°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible hose designed for natural gas (CNG - Compressed Natural Gas). Used for filling tanks of vehicles powered by CNG. Available in a double version with a venting hose. Standards: ISO 15500-17. Inner layer: black conductive polyamide. Reinforcement: one or two aramid braids + synthetic braid. Outer layer: red micro-perforated polyurethane. Working pressure: 350 bar. Operating temperature: from -40°C to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible hose designed for hydraulic oil installations, gases, air, fuels, water-based fluids. Standards: SAE 100R7, ISO 3949-R7. Inner layer: polyester. Reinforcement: double polyester braid. Outer layer: micro-perforated polyurethane. Working pressure: from 155 bar to 207 bar, depending on hose diameter. Operating temperature: from -40°C to +93°C (for water and air up to +65°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible hose designed for low-pressure industrial installations. Particularly recommended for autogas (LPG - Liquefied Petroleum Gas). Used in automotive LPG systems as a connection between the tank and other system components. To maintain LPG homologation, special brass screw fittings must be installed. Standards: ECE R67-01. Installation: contact TUBES INTERNATIONAL®. Inner layer: polyamide. Reinforcement: polyester braid. Outer layer: micro-perforated polyurethane. Operating temperature: from -25°C to +125°C.
