Our products
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA strong screw clamp with a hinged closure for heavy loads, featuring a durable construction and two solid pins. Recommended for tight connections of thick-walled, reinforced industrial hoses. The clamp is made of high-quality steel band from 18 mm to 26 mm wide. The rolled edges of the band prevent damage to the hose surface on which the clamp works. The clamp is marked on the band with the minimum and maximum diameter and the material it is made of. Thanks to the hexagon screw head, commonly used tools such as open-end, socket and adjustable wrenches can be used. Material: all components made of AISI 316 stainless steel.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA strong screw clamp with a hinged closure for heavy loads, featuring a durable construction and two solid pins. Recommended for tight connections of thick-walled, reinforced industrial hoses. The clamp is made of high-quality steel band from 18 mm to 26 mm wide. The rolled edges of the band prevent damage to the hose surface on which the clamp works. The clamp is marked on the band with the minimum and maximum diameter and the material it is made of. Thanks to the hexagon screw head, commonly used tools such as open-end, socket and adjustable wrenches can be used. Material: all components made of galvanized steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA high-quality general-purpose worm-drive clamp intended for quick and easy fastening of industrial hoses, made entirely of AISI 316 stainless steel, recommended for use in the food, chemical, marine and similar industries. Manufactured in accordance with the requirements of DIN 3017 and the RoHS Directive 2002/95/EC. The ASFA-S clamp with a band width of 12 mm has greater strength and a higher permissible tightening torque than the ASFA-L clamp (9 mm), ensuring a stronger grip, and is recommended for heavier applications. The unique worm mechanism in a compact housing and the cold-formed thread in the band, smooth on the inside, ensure a secure, repeated grip without damaging the hose surface. Material: AISI 316 stainless steel (W4).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsRight-hand bridge worm-drive clamp with a band width of 9 and 12 mm, intended for quick and easy repeated fastening of hoses reinforced with a steel spiral, e.g., ventilation hoses. The bridge's task is to enclose the spiral wire and ensure the clamp fits the hose accurately. Using a bridge in the clamp provides a tight connection that does not damage the hose. The right-hand OMP clamp is intended for mounting typical spiral suction hoses with a right-wound wire spiral, e.g., P1PU, P2PU, P3PU, P7PU, SMARTFLEX. The clamp's unique worm mechanism in a compact housing and the cold-formed thread in the band, smooth on the inside, ensure a secure, repeated grip without damaging the hose surface. The number of segments depends on the clamp's minimum/maximum diameter. Material: AISI 430 steel (screw made of galvanized steel).- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBand clamp with a worm-drive lock, equipped with a spring to compensate for dimensional changes in the connection (hose shrinkage due to cold flow of the material or due to large temperature changes). The spring is a set of 8 disc (Belleville) springs – washers under the screw head. This maintains the clamp's grip and sealing around the entire circumference of the hose, preventing leakage from the installation. The clamp's spring mechanism automatically increases or decreases its diameter while maintaining the clamp's grip. Particularly recommended in the case of large temperature changes. Correct clamping is indicated by the screw end protruding beyond the lock housing and by the flattened disc springs. The clamp's inner insert protects the hose surface from damage. Installation tightening torque 5.6 Nm (max. 9.6 Nm). Screw/lock material: stainless steel 410. Band material: stainless steel 300. Band width: 14.3 mm (9/16").
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA strong two-screw clamp with a double band and a hinged closure for heavy loads. Two screws and solid pins ensure an accurate and tight connection between the hose and the fitting. Recommended for connections of thick-walled, reinforced industrial hoses. The clamp is made of high-quality steel band 20 mm and 24 mm wide. The rolled edges of the bridges prevent damage to the hose surface. The clamp is marked on the band with the minimum and maximum diameter and the material. Screws are tightened with an Allen key. All components are made of AISI 316 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBand clamp with a worm-drive lock, equipped with a spring to compensate for dimensional changes in the connection (hose shrinkage due to cold flow of the material or due to large temperature changes). The spring is a set of 10 disc (Belleville) springs – washers under the screw head. This maintains the clamp's grip and sealing around the entire circumference of the hose, preventing leakage from the installation. The clamp's spring mechanism automatically increases or decreases its diameter while maintaining the clamp's grip. Particularly recommended in the case of large temperature changes for heavier applications. Correct clamping is indicated by the screw end protruding beyond the lock housing and by the flattened disc springs. The clamp's inner insert protects the hose surface from damage. Installation tightening torque 8.5 Nm (max. 14.1 Nm). Screw/lock material: stainless steel 410. Band material: stainless steel 300. Band width: 16 mm (5/8").
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA high-quality general-purpose worm-drive clamp intended for quick and easy fastening of industrial hoses, made entirely of AISI 316 stainless steel, recommended for use in the food, chemical, marine and similar industries. Manufactured in accordance with the requirements of DIN 3017 and the RoHS Directive 2002/95/EC. The ASFA-L clamp with a band width of 9 mm is recommended for standard applications. The unique worm mechanism in a compact housing and the cold-formed thread in the band, smooth on the inside, ensure a secure, repeated grip without damaging the hose surface. Material: AISI 316 stainless steel (W5).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA high-quality general-purpose worm-drive clamp intended for quick and easy fastening of industrial hoses. Manufactured in accordance with the requirements of DIN 3017 and the RoHS Directive 2002/95/EC. The ASFA-L clamp with a band width of 9 mm is recommended for standard applications. The unique worm mechanism in a compact housing and the cold-formed thread in the band, smooth on the inside, ensure a secure, repeated grip without damaging the hose surface. Material: galvanized carbon steel (W1).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA high-quality general-purpose worm-drive clamp intended for quick and easy fastening of industrial hoses. Manufactured in accordance with the requirements of DIN 3017 and the RoHS Directive 2002/95/EC. The ASFA-S clamp with a band width of 12 mm has greater strength and a higher permissible tightening torque than the ASFA-L clamp (9 mm), ensuring a stronger grip, and is recommended for heavier applications. The unique worm mechanism in a compact housing and the cold-formed thread in the band, smooth on the inside, ensure a secure, repeated grip without damaging the hose surface. Material: galvanized carbon steel (W1).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA strong two-screw clamp with a double band and a hinged closure for heavy loads. Two screws and solid pins ensure an accurate and tight connection between the hose and the fitting. Recommended for connections of thick-walled, reinforced industrial hoses. The clamp is made of high-quality steel band 20 mm and 24 mm wide. The rolled edges of the bridges prevent damage to the hose surface. The clamp is marked on the band with the minimum and maximum diameter and the material. Screws are tightened with an Allen key. All components are made of galvanized steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA high-quality, strong clamp with a hinged closure for heavy loads and rolled band edges, recommended for securing thick-walled, reinforced industrial hoses and pipes. The unique design provides even pressure around the entire circumference, ensuring optimal sealing. The movable bridge allows repeated installation without removing the hose. Manufactured in accordance with the RoHS Directive 2002/95/EC. Three spot welds on the band, a high-strength screw with a spacer, and securing half-rollers guarantee maximum, reliable pressure. The clamp is marked on the band with the minimum and maximum diameter and the material it is made of. The W4 version is made entirely of stainless steel and is intended for demanding applications requiring high corrosion resistance – marine applications and the food industry. Thanks to the hexagon screw head, commonly used tools such as open-end, socket and adjustable wrenches can be used. Important! Exceeding the tightening torque will bend the screw housing; installation with pneumatic tools is not recommended. The band and bridge are made of AISI 430 steel, the screw and rollers of galvanized steel. The maximum working pressure of up to 45 bar depends on the hose type and the clamping diameter.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsRight-hand bridge worm-drive clamp with a band width of 9 and 12 mm, intended for quick and easy repeated fastening of hoses reinforced with a steel spiral, e.g., ventilation hoses. The bridge's task is to enclose the spiral wire and ensure the clamp fits the hose accurately. Using a bridge in the clamp provides a tight connection that does not damage the hose. The right-hand OMP clamp is intended for mounting typical spiral suction hoses with a right-wound wire spiral, e.g., P1PU, P2PU, P3PU, P7PU, SMARTFLEX. The clamp's unique worm mechanism in a compact housing and the cold-formed thread in the band, smooth on the inside, ensure a secure, repeated grip without damaging the hose surface. The number of segments depends on the clamp's minimum/maximum diameter. Material: AISI 304 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsEAR CLIP clamping ring with 2 ears for mounting various types of low-pressure hoses, braid-reinforced or without reinforcement. Easy and quick installation using dedicated pincers. Rounded edges inside the ring protect the hose from damage. Material: galvanized carbon steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA high-quality, strong clamp with a hinged closure for heavy loads and rolled band edges, recommended for securing thick-walled, reinforced industrial hoses and pipes. The unique design provides even pressure around the entire circumference, ensuring optimal sealing. The movable bridge allows repeated installation without removing the hose. Manufactured in accordance with the RoHS Directive 2002/95/EC. Three spot welds on the band, a high-strength screw with a spacer, and securing half-rollers guarantee maximum, reliable pressure. The clamp is marked on the band with the minimum and maximum diameter and the material it is made of. The W4 version is made entirely of stainless steel and is intended for demanding applications requiring high corrosion resistance – marine applications and the food industry. Thanks to the hexagon screw head, commonly used tools such as open-end, socket and adjustable wrenches can be used. Important! Exceeding the tightening torque will bend the screw housing; installation with pneumatic tools is not recommended. The band and bridge are made of AISI 304 steel, the screw and rollers of AISI 302 steel. The maximum working pressure of up to 45 bar depends on the hose type and the clamping diameter.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsRight-hand bridge worm-drive clamp with a band width of 9 and 12 mm, intended for quick and easy repeated fastening of hoses reinforced with a steel spiral, e.g., ventilation hoses. The bridge's task is to enclose the spiral wire and ensure the clamp fits the hose accurately. Using a bridge in the clamp provides a tight connection that does not damage the hose. The right-hand OMP clamp is intended for mounting typical spiral suction hoses with a right-wound wire spiral, e.g., P1PU, P2PU, P3PU, P7PU, SMARTFLEX. The clamp's unique worm mechanism in a compact housing and the cold-formed thread in the band, smooth on the inside, ensure a secure, repeated grip without damaging the hose surface. The number of segments depends on the clamp's minimum/maximum diameter. Material: AISI 316 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMINI single-screw clamp intended for industrial hoses of moderate diameter and relatively thin wall. Equipped with a band tongue that protects the hose from contact with the screw and ensures even circumferential pressure. The rolled edges of the clamp do not damage the hose. The clamp fits and adheres perfectly to the hose surface, providing a strong, uniform grip. The hexagon-head screw has slots allowing various tools to be used for installation. Material: electrolytically galvanized carbon steel (W1).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBand intended for producing clamps for hoses of any diameter. Standard length: 25 m. Band width: 8 mm or 14 mm. Material: stainless steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe EAR CLIP-W clamping ring is an improved version of the EARCLIP ring. It has an internal protective insert whose role is to protect the hose surface at the ring's clamping point and provide more even pressure around the circumference. Recommended for hoses of delicate construction. Rounded edges inside the ring protect the hose from damage. Material: AISI 304 steel (main ring), AISI 301 steel (insert).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe EAR CLIP-W clamping ring is an improved version of the EARCLIP ring. It has an internal protective insert whose role is to protect the hose surface at the ring's clamping point and provide more even pressure around the circumference. Recommended for hoses of delicate construction. Rounded edges inside the ring protect the hose from damage. Material: galvanized carbon steel (main ring), AISI 301 stainless steel (insert).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMINI single-screw clamp intended for industrial hoses of moderate diameter and relatively thin wall. Equipped with a band tongue that protects the hose from contact with the screw and ensures even circumferential pressure. The rolled edges of the clamp do not damage the hose. The clamp fits and adheres perfectly to the hose surface, providing a strong, uniform grip. The hexagon-head screw has slots allowing various tools to be used for installation. Material: all components made of AISI 304 (W4) steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBand clamp with a worm-drive lock, equipped with a spring to compensate for dimensional changes in the connection (hose shrinkage due to cold flow of the material or due to large temperature changes). The spring is a set of 8 disc (Belleville) springs – washers under the screw head. This maintains the clamp's grip and sealing around the entire circumference of the hose, preventing leakage from the installation. The clamp's spring mechanism automatically increases or decreases its diameter while maintaining the clamp's grip. Particularly recommended in the case of large temperature changes. Correct clamping is indicated by the screw end protruding beyond the lock housing and by the flattened disc springs. The clamp's inner insert protects the hose surface from damage. Installation tightening torque 5.6 Nm (max. 9.6 Nm). Screw/lock material: galvanized carbon steel. Band material: stainless steel 300. Band width: 14.3 mm (9/16").
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLeft-hand bridge worm-drive clamp with a band width of 9 and 12 mm, intended for quick and easy repeated fastening of hoses reinforced with a steel spiral, e.g., ventilation hoses. The bridge's task is to enclose the spiral wire and ensure the clamp fits the hose accurately. Using a bridge in the clamp provides a tight connection that does not damage the hose. The left-hand OML clamp is intended for mounting CLIP type hoses (hoses of this type are made of impregnated fabric, and the left-wound spiral is made of sheet metal and steel wire), e.g., KEVLAR SI CL, SILICON CL, TEFLON CL, GRIPFLEX. The clamp's unique worm mechanism in a compact housing and the cold-formed thread in the band, smooth on the inside, ensure a secure, repeated grip without damaging the hose surface. The number of segments depends on the clamp's minimum/maximum diameter. Material: AISI 304 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsEAR CLIP clamping ring with 2 ears for mounting various types of low-pressure hoses, braid-reinforced or without reinforcement. Easy and quick installation using dedicated pincers. Rounded edges inside the ring protect the hose from damage. Material: AISI 304 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA clamp with a smooth inner surface, full circumference and no gaps, made from a single length of material. Rounded edges protect the hose from damage. Intended for mounting lightweight PVC and rubber hoses. Particularly recommended for series production of flexible hoses thanks to easy and quick installation. The AISI 304 (W4) stainless steel construction allows use in the food, medical, electronics, automotive and welding-equipment industries. Material: AISI 304 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDouble-wire spring clamp intended for quickly fastening low-pressure hoses. Made of galvanized spring steel. Installed with universal pliers by pressing the clamp's legs together, which allows the clamp to be placed on a hose with a diameter slightly larger than the maximum (within the clamp's diameter range: the inner diameter of the spring clamp that provides suitable elastic pressure).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHERBIE CLIP® reusable clamps made of black, UV-resistant polyamide (PA66). Also available in polypropylene (PP). The double row of teeth provides more than twice the clamping force of similar products with only one row. The clamp design allows easy and quick assembly and disassembly using dedicated special tools, standard "frog" type tools, or by hand. Operating temperature: from -40°C to +125°C (PA66, briefly up to +170°C), from -40°C to +60°C (PP, briefly up to +90°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLock intended for producing clamps. Lock for band 8 mm or 14 mm wide. Lock material: AISI 304 or AISI 430 steel. Screw material: galvanized steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsEAR CLIP clamping ring with 1 ear for mounting various types of low-pressure hoses, braid-reinforced or without reinforcement. Easy and quick installation using dedicated pincers. Rounded edges inside the ring protect the hose from damage. Material: galvanized carbon steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsEAR CLIP clamping ring with 1 ear for mounting various types of low-pressure hoses, braid-reinforced or without reinforcement. Easy and quick installation using dedicated pincers. Rounded edges inside the ring protect the hose from damage. Material: AISI 304 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDurable hand pincers intended for installing EAR-CLIP type or similar clamps. The jaw profile allows easy and reliable front crimping.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsProfessional wrench with a flexible steel arm ending in a 7 mm socket, for ASFA-L, ASFA-S and similar worm-drive clamps. The arm length allows work in hard-to-reach places. A comfortable, ergonomic handle ensures a secure grip. Handle color: blue.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLeft-hand bridge worm-drive clamp with a band width of 9 and 12 mm, intended for quick and easy repeated fastening of hoses reinforced with a steel spiral, e.g., ventilation hoses. The bridge's task is to enclose the spiral wire and ensure the clamp fits the hose accurately. Using a bridge in the clamp provides a tight connection that does not damage the hose. The left-hand OML clamp is intended for mounting CLIP type hoses (hoses of this type are made of impregnated fabric, and the left-wound spiral is made of sheet metal and steel wire), e.g., KEVLAR SI CL, SILICON CL, TEFLON CL, GRIPFLEX. The clamp's unique worm mechanism in a compact housing and the cold-formed thread in the band, smooth on the inside, ensure a secure, repeated grip without damaging the hose surface. The number of segments depends on the clamp's minimum/maximum diameter. Material: AISI 430 steel (screw made of galvanized steel).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLeft-hand bridge worm-drive clamp with a band width of 9 and 12 mm, intended for quick and easy repeated fastening of hoses reinforced with a steel spiral, e.g., ventilation hoses. The bridge's task is to enclose the spiral wire and ensure the clamp fits the hose accurately. Using a bridge in the clamp provides a tight connection that does not damage the hose. The left-hand OML clamp is intended for mounting CLIP type hoses (hoses of this type are made of impregnated fabric, and the left-wound spiral is made of sheet metal and steel wire), e.g., KEVLAR SI CL, SILICON CL, TEFLON CL, GRIPFLEX. The clamp's unique worm mechanism in a compact housing and the cold-formed thread in the band, smooth on the inside, ensure a secure, repeated grip without damaging the hose surface. The number of segments depends on the clamp's minimum/maximum diameter. Material: AISI 316 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDurable hand pliers intended for installing CAW type or similar clamps (with 1 or 2 "ears"). The jaw profile allows easy and reliable front and side crimping.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe DCL clamp is made from a single length of band with a snap closure that prevents accidental release. The clamping force is evenly distributed over the clamp, and the smooth inner surface of the band protects the hose from damage. Easy and quick assembly and disassembly using dedicated tools. The AISI 304 (W4) stainless steel construction allows use in the food, household-appliance and automotive industries. A colored strip on the clamp aids identification. Note: the snap clamp has no clamping adjustment; the diameter after installation must be precisely matched to the hose. Material: AISI 304 steel. Identification strip available in colors (specified in the note): blue, green, purple, black, red.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAn easy-to-install and adjustable clamp with a double wire and a screw-tightening system, intended for quickly fastening lightweight, low-pressure hoses with an external spiral. The smooth edges of the round wire minimize hose damage. The clamp is generally used in ventilation systems and household appliances. Ideal for industrial and domestic use. The maximum medium pressure depends on the hose type and the shape of the connecting part. Material: galvanized spring steel (screw made of galvanized steel).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBand clamp with a worm-drive lock, equipped with a spring to compensate for dimensional changes in the connection (hose shrinkage due to cold flow of the material or due to large temperature changes). The spring is a set of 10 disc (Belleville) springs – washers under the screw head. This maintains the clamp's grip and sealing around the entire circumference of the hose, preventing leakage from the installation. The clamp's spring mechanism automatically increases or decreases its diameter while maintaining the clamp's grip. Particularly recommended in the case of large temperature changes for heavier applications. Correct clamping is indicated by the screw end protruding beyond the lock housing and by the flattened disc springs. The clamp's inner insert protects the hose surface from damage. Installation tightening torque 8.5 Nm (max. 14.1 Nm). Screw/lock material: galvanized carbon steel. Band material: stainless steel 300. Band width: 16 mm (5/8").
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsEZYCLIK™-P low-head-profile snap clamps made of black, UV-resistant polyamide (PA66). Also available in polypropylene (PP) and glass-fiber reinforced polyamide. The clamps are specially designed for securing hoses in confined spaces. Their unique design ensures quick and reliable fastening. Note: the snap clamp has no clamping adjustment; the diameter after closing must be precisely matched to the hose. Operating temperature: from -40°C to +125°C (PA66), from -40°C to +60°C (PP).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHand pliers allow easy and quick assembly and disassembly of DCL clamps. A comfortable, ergonomic handle ensures a secure grip. Handle color: red.
