0

Our products

Filters
Product categories
Working pressure [bar]
Minimum operating temperature [°C]

Minimum operating temperature [°C]: -200 — 260

Maximum operating temperature [°C]

Maximum operating temperature [°C]: 50 — 1100

Material
Vacuum resistance
Standard length [m]
  • Select options This product has multiple variants. The options may be chosen on the product page / Details
    Light, flexible hose suction-delivery intended for water, juices, drinks and other products food. no phthalates in material allows on use hose for conveying milk and its dairy products and alcohols with a concentration up to 50% and temperature up to +60°C. not recommended for oils and greasy substances food. Reinforcement with a rigid-PVC spiral, impact-resistant, provides good resistance to vacuum and kinking of the hose. transparent wall allows on easy visual control of the flow. A smooth inner surface reduces flow losses and ensures ease of cleaning. also surface outer hose is smooth, co facilitates assembly ends using bands or straps, reduces damage external in result abrasion and facilitates maintaining hose in cleanliness. W use not regarding direct contact with food (in industry, construction, agriculture) It can be used both for light chemicals, water, sludge and sewage, other liquids (without fat, oils and hydrocarbons), as and for air, vacuum conveying dusts, powders, granulates and other lightly abrasive substances bulk (not greasy). In that case the abrasiveness and the possible problem of static electricity must be taken into account. as hose reinforced only spiral with hard PVC, not having braid, is characterized a certain elongation under pressure, co should take into account in use, especially in temperatures above +40°C. Standards and requirements: Food industry, food contact: compliant with the European requirements 1935/2004/EC and 10/2011/EU (simulant fluids A, B, C and D1), 2023/2006/EC (GMP). Hose material: transparent PVC. Reinforcement: spiral with hardened PVC. Working pressure: from 3 bar to 7 bar, depending on the diameter hose. Operating temperature: -15°C up to +60°C.
  • Select options This product has multiple variants. The options may be chosen on the product page / Details

    Hose for emptying septic tanks MULTIFLEX

    Air and water hoses | All products
    0 zł
    Externally Serrated flexible and strong hose suction - delivery for water and sewage. is characterized good resistance on impacts external and heavy conditions use and resistance on radiation UV and low temperatures. used for in systems irrigation, tankers, for rinsing sewers and emptying septic tanks. used also in installations industrial. Hose material: grey-violet PVC. Reinforcement: rigid-PVC spiral. Working pressure: from 3 bar to 8 bar, depending on the diameter hose and temperatures. Operating temperature: od -20°C up to +50°C.
  • Select options This product has multiple variants. The options may be chosen on the product page / Details
    Light, soft and flexible, easy in handling hose delivery intended for conveying substances food, requiring the use of rubber free of odour and taste. Contains no phthalates or bisphenol A. Suitable for milk and dairy products, as well as wine, beer, fruit juices. not recommended for oils and greasy substances food. Layer outer hose resistant to abrasion and conditions atmospheric. standards and requirements : industry food, contact with food 1935/2004/EC and 2023/2006/EC (GMP), D.M. 21/03/73, FDA 21 CFR 177.2600, BfR XXI kat. 2. Inner layer: white rubber natural (NR). Reinforcement: cord synthetic. Outer layer: blue EPDM rubber. Working pressure: 6 bar. Operating temperature: from -25°C to +80°C.
  • Select options This product has multiple variants. The options may be chosen on the product page / Details
    Light, flexible and pliable, resistant to temperature hose suction intended for discharge gases, vapours, fumes and air o high temperature. Flame-retardant, to some extent resistant to hot sparks. used mainly in industry metallurgical, foundry, ceramic, glass, at furnaces, engines and as A guard thermal. It is characterised by high compressibility - up to 1:6, a strong construction thanks to glass fabric reinforced with stainless steel threads, and impact resistance thanks to the external spiral. Used only as a suction hose working under vacuum, due to the possibility of gases penetrating outwards under overpressure (degassing). Also available with a stainless steel spiral (from 80 mm diameter). Assembly of the hose on connectors with bridge clamps (lewo-handed). Standard length: from 2 to 10 m - contact Tubes International. Hose material: impregnated fabric glass with fibres of steel stainless, externally grey. Reinforcement: outer spiral with wire and sheet steel galvanized. Operating temperature: od -50°C up to +400°C.
  • Select options This product has multiple variants. The options may be chosen on the product page / Details
    Very light and flexible hose suction-delivery, intended for applications general-industrial (in industry, construction, agriculture). It can be used for water, light chemicals, sludge and sewage, agents protection plants, other liquids (without fat, oils and hydrocarbons) as well as for air, vacuum conveying dusts, powders, granulates and other lightly abrasive substances bulk (non-greasy). In that case the abrasiveness and the possible problem of static electricity must be taken into account. W industry food It can be used for conveying food hydrated, acidic, alcohols for 20% np. juices, drinks, beer, wine,(simulants A, B, C; up to +60°C and 2 h). Not recommended for milk and dairy products or oils and greasy food substances. Reinforcement with a rigid-PVC spiral, impact-resistant, provides good resistance to vacuum and kinking of the hose. A smooth inner surface reduces flow losses and ensures ease of cleaning. The outer surface is lightly corrugated, smooth for small diameters. hose FLORIDA complies with the European requirements 1978/142/EEC, 1935/2004/EC, 1895/2005/EC and 10/2011/EU (simulants A, B, C), 2023/2006/EC (GMP). Suitable for temporary contact with food when conveying food substances - under the conditions specified in the manufacturer's declaration of conformity (available at Tubes International). Hose material: transparent PVC. Reinforcement: rigid-PVC spiral (grey). Working pressure at a temperature of 20°C: from 3 bar to 6.5 bar - depending on the diameter hose. As the working temperature rises, the hose's working pressure value decreases. Operating temperature: from -5°C to +60°C.
  • Select options This product has multiple variants. The options may be chosen on the product page / Details
    Pliable, light and strong hose suction-delivery intended for conveying water, sewage, sludge, liquids non-corrosive, fertilisers natural (slurry). Layer inner with smooth rubber synthetic, resistant to sludge and sewage. corrugated Layer outer ensures small radius bends and is resistant to ozone, conditions atmospheric and aging. intended for applications agricultural, construction and industrial, used for emptying septic tanks, as hose suction for pumps water and sewage, for dewatering and irrigation, for tankers. can be used for extraction air, dust and for bulk materials. assembly – depending on the diameter and type fittings using bands steel, straps, clamps or ferrule clamping. Inner layer: black synthetic rubber (SBR). Reinforcement: cord synthetic, steel spiral. Outer layer: black corrugated synthetic rubber. Working pressure: 3 bar. Operating temperature: od -30°C up to +70°C.
  • Select options This product has multiple variants. The options may be chosen on the product page / Details
    Light, very pliable and flexible hose intended for extraction hot vapours, fumes, gases, air blowing and discharge air cooling. resistant chemical, on radiation UV and aging. used m.in. for extraction gases in industry metallurgical, foundry, industry glass and ceramic, for hot air in dryers industrial, in printing houses and paper mills, in vehicles and engines for air cooling, incineration plants, a also for extraction exhaust gases and gases welding. smooth inside (in state extended), o very small radius bends enabling easy installations in tight spaces equipment and vehicles. not recommended for continuous dynamic bending. Assembly with clamps. Other diameters are available on special order. Hose material: fabric glass impregnated red silicone. Reinforcement: inner spiral with wire steel, outer cable with fibre glass. Operating temperature: od -70°C up to +250°C (momentarily up to +300°C).
  • Select options This product has multiple variants. The options may be chosen on the product page / Details

    Hose delivery for strong alcohols SCOTLAND BE®

    All products | Food and beverage hoses
    0 zł
    The highest quality hose delivery intended for conveying wine, beer, juices fruit etc. and substances food free of fats, requiring the use of rubber free of odour and taste. Contains no phthalates or bisphenol A. Designed for high-class wines and alcohols, for use in breweries and distilleries. Widely used in the spirits industry for conveying strong alcohols with a concentration up to 96%. It has copper wires ensuring electrical continuity between the hose ends, which increases the safety of conveying high-proof, flammable alcohol (during assembly, contact of the wire with the end must be ensured). Layer outer resistant to abrasion, aging and conditions atmospheric. standards and requirements : industry food, contact with food 1935/2004/EC, 2023/2006/EC (GMP). Layer inner compliant with FDA 21 CFR 177.2600, BfR XXI kat.2, D.M. 21/03/73. Inner layer: white rubber butyl (IIR). Reinforcement: cord synthetic. Outer layer: red rubber butyl (IIR). Working pressure: 10 bar. Operating temperature: from -40°C to +120°C.
  • Select options This product has multiple variants. The options may be chosen on the product page / Details

    Hose for oxygen medical NOBELAIR AS/R

    Air and water hoses | All products
    0 zł
    Flexible five-layer hose for compressed air. light, very pliable even in low temperatures, resistant to elongation. antistatic (R 6 Ω/m, EN ISO 8031), resistant to elevated temperature ambient, adapted for disinfection. specially designed for apparatus breathing in accordance with the standard EN 14593 and EN 14594. used in industry paint, petrochemical, construction and power nuclear. On special order DN6 and DN10 in color green. Inner layer: black, antistatic PVC. Reinforcement: a polyester braid. Outer layer: blue PVC. Working pressure: 15 bar (6 bar for temperatures 70°C). Operating temperature: od -20°C up to +70°C (momentarily up to +80°C), working pressure depends on temperature.
  • Select options This product has multiple variants. The options may be chosen on the product page / Details
    Strong, thick, flexible hose intended for extraction and conveying granulates and other bulk materials. intended for use in many types industry. used m.in. granulate plastics, materials insulating, waste, sand and other materials construction. fairly pliable, little compressible, smooth inside, flexible also in low temperatures. O sound resistance to abrasion, resistant to microbes and hydrolysis. non-toxic, Contains no halogen compounds or plasticisers. Resistant to oils and petrol. Assembly on connectors with bridge clamps (prawo-handed). can be available other diameter. besides version standard P7 M PU AE hose Available is in version P7 M PU EL conductive electrically (R ≤10 4 Ω), compliant with ATEX 2014/34/EU, TRBS 2153 and for extraction also with TRGS 727, can be ona used in zones hazard explosion po carrying out analysis risk. Hose material: polyether-polyurethane. Wall thickness measured between the spiral: 1.4 mm. Reinforcement: spiral with wire steel. Operating temperature: od -40°C up to +100°C (momentarily for + 125°C).
  • Select options This product has multiple variants. The options may be chosen on the product page / Details
    Very flexible hose intended for conveying food, pharmaceutical and cosmetic substances: water, fruit juices, beer, wine, vinegar, alcohols with a concentration up to 96%, milk and dairy products, creams, soaps, aromatic substances, pigments and others. Resistant to fats and oils within the standard range of use. Good chemical resistance to light chemicals – acid and base solutions. The extruded, completely smooth inner and outer surface of the hose facilitates flow and cleaning. The hose material is not vulcanised, is clean (contains no vulcanising additives), resistant to hydrolysis, does not promote bacterial growth, with low porosity and low permeability. Completely neutral in taste and odour, does not change the organoleptic properties of the medium. resistant to aging, conditions atmospheric and radiation UV. Cleaning, disinfection or sterilisation of the hose must be carried out strictly according to the recommendations given in the catalogue sheet below. Cleaning by the SIP method, which noticeably shortens the service life, is not recommended. Use for high-proof alcohol (its vapours or other flammable substances) requires taking into account the hazards associated with static electricity. standards and requirements : 1) industry food, contact with food: compliant with the European requirements 1935/2004/EC and 10/2011/EU (simulant fluids A, B, C, D1, D2), 2023/2006/EC (GMP) and American FDA 21 CFR 177.2600 „e”. 2) Pharmaceutical industry: USP CLASS VI. Hose material: transparent TPE-S. Reinforcement: a polyester braid. Working pressure: from 7 bar to 12 bar, depending on the diameter hose. Operating temperature: -30°C up to +100°C.
  • Select options This product has multiple variants. The options may be chosen on the product page / Details
    Light and flexible, popular hose, PVC general use. used for water, air, light chemicals in agriculture, horticulture, industry and for use domestic. Inner layer: transparent PVC. Reinforcement: a polyester braid. Outer layer: green clear PVC. Working pressure at a temperature of 20°C: from 10 bar to 17 bar - depending on the diameter hose. Operating temperature: from -5°C to +60°C. As the working temperature rises, the hose's working pressure value decreases.
  • Select options This product has multiple variants. The options may be chosen on the product page / Details

    Low-pressure unreinforced hose, PVC, type CP

    All products | General purpose hoses
    0 zł
    A universal, very flexible, unreinforced hose manufactured in Great Britain. intended for pressureless (or pod very low pressure) conveying air, water and liquids in use general-industrial, for light chemicals (np. diluted acids and bases), in use laboratory, on level gauges and as A guard pipes, lines, cables itp. The hose material contains no phthalates, silicone or cadmium and complies with the REACH, RoHS and WEEE regulations. In accordance with EU regulations, use for food products is possible after first carrying out the required migration tests using appropriate model fluids simulating the given type of food (the material used to make the hose complies with the requirements of 10/2011/EU and FDA 21). The hose material is self-extinguishing per UL94-V2 and UL94-HB (at a thickness of 3 mm). The stated working pressure is the approximate value of the recommended working pressure at a safety factor of 5:1. Hose material: transparent PVC. Operating temperature: from -20°C to +55°C (momentarily up to +65°C, working pressure depends on temperature).
  • Select options This product has multiple variants. The options may be chosen on the product page / Details
    Very strong and thick, flexible hose intended for extraction and conveying abrasive bulk materials, granulates, sand, gravel, pebbles, substrate agricultural. used for loading and emptying silos, vehicles and excavators suction, handling with tankers etc. thick wall and fairly dense spiral reinforcing ensures high resistance to pressure and vacuum. smooth inside, non-compressible, fairly pliable (r=2.5xD), flexible also in low temperatures. hose o sound resistance to abrasion, resistant also on oils and gasoline. Assembly on connectors with bridge clamps (prawo-handed) or assembly special on ends industrial e.g. flange. Other diameters may be available on special order. versions: P3 SV PU – with polyester – polyurethane, very resistant to abrasion; P3 SV PU AE - version with polyether – polyurethane, resistant to abrasion, resistant to microbes and hydrolysis, compliant with the European requirements 1935/2004/EC and 10/2011/EU (simulant E), 2023/2006/EC (GMP) and American FDA 21 CFR 177.2600 and 178.2010. is suitable for time contact with food at conveying dry, bulk, free of fat on surface, substances food - on conditions defined in declaration conformity the manufacturer (Available in Tubes International). Hose material: transparent polyester-polyurethane (P3 SV PU), polyether – polyurethane (P3 SV PU AE). Wall thickness measured between the spiral: 2.5 mm. Reinforcement: spiral with wire steel. Operating temperature: od -40°C up to +100°C.
  • Select options This product has multiple variants. The options may be chosen on the product page / Details
    Flexible hose suction intended for sewage and water. externally Serrated, almost smooth in center. special profile makes, that hose is resistant to vacuum and creasing, (returns for its shape). as hose with polyethylene has very good resistance chemical and resistance to corrosion biological (rotting, rotting). is flexible in low temperatures. hose is commonly used for emptying septic tanks and portable toilets, in construction, facilities tourist, in marinas and on airports. Hose material: yellow profile polyethylene (PE). Reinforcement: black profile polyethylene (PE). Vacuum: 0.95 bar (for diameter 51mm ÷ 76 mm); 0.85 bar (for diameter 102 mm). Operating temperature: od -40°C up to +60°C.
  • Select options This product has multiple variants. The options may be chosen on the product page / Details
    Light, very flexible pressure hose delivery intended for conveying water, juices, drinks and other products food in temperature up to +40°C. The absence of phthalates in the hose material recommends it for conveying milk and dairy products and alcohols with a concentration up to 50% and a temperature up to +40°C. not recommended for oils and greasy substances food. used also widely in industry and laboratories for compressed air, gases, light chemicals. Reinforcement a braid spiral ensures high strength pressure and low deformation hose under pressure also at pulsations pressure (in the scope pressure working). Standards and requirements: Food industry, food contact: compliant with the European requirements 1935/2004/EC and 10/2011/EU (simulant fluids A, B, C and D1), 2023/2006/EC (GMP). Hose material: transparent PVC. Reinforcement: a polyester braid. Working pressure: from 9 bar to 27 bar, depending on the diameter hose. Operating temperature: from -15°C to +60°C.
  • Select options This product has multiple variants. The options may be chosen on the product page / Details
    Strong hose suction-delivery intended for greasy and non-greasy substances food, requiring the use of rubber free of odour and taste. Contains no plasticisers, phthalates or substances of animal origin. especially recommended for handling and heavy conditions use. widely used in industry food in dairies and oil mills. Layer inner made with NBR resistant is on standard used in industry food agents and processes cleaning. Layer outer resistant to momentary contact with fats animal and vegetable, abrasion and conditions atmospheric. standards and requirements : 1) general: EC 2002/95 (RoHS), EC 1907/2006 (REACH). 2) industry food, contact with food: EC 1935/2004, EC 2023/2006 (GMP). Layer inner compliant with D.M. 21/03/73, FDA 21 CFR 177.2600, BfR, 3A Sanitary Standards. RAL (German institute ensuring quality and certification). Vacuum: 0.9 bar. Inner layer: white NBR rubber. Reinforcement: cord synthetic, steel spiral. Outer layer: blue rubber CR. Working pressure: 10 bar. Operating temperature: from -20°C to +90°C.
  • Select options This product has multiple variants. The options may be chosen on the product page / Details

    Hose for discharge fumes welding P2A1000

    All products | Ducting and ventilation hoses
    0 zł
    Light, exceptionally flexible and compressible hose intended for air conditioning, discharge and air blowing air, extraction fumes welding. Widely used for arms ducting, ventilation, heating tents, drying the structure construction. self-extinguishing and non-flammable (non-spreading flame) in accordance with UL94 V-0. resistant to hydrolysis and microbes. Other diameters are available on special order in the scope 30 ÷ 800 mm and color: black, blue, white and yellow. Assembly of the hose on connectors with bridge clamps (prawo-handed). Hose material: fabric polyester impregnated grey PVC. Wall thickness: 0.4 mm. Reinforcement: spiral with wire steel. Operating temperature: od -30°C up to +80°C (momentarily up to +100°C).
  • Select options This product has multiple variants. The options may be chosen on the product page / Details
    Flexible hose intended for conveying liquid substances food, water potable, chemicals. Layer inner hose made is with polyethylene high density (HDPE) o quality food. Material ten meets high requirements for water potable both in the scope the absence migration components for standing in hose water as and the absence tendency for formation biofilm (test microbiological). simultaneously Meets the requirements of for contact with food for liquid substances food and has very high resistance chemical (acids, bases, carbon, solvents). therefore hose It can be used for: 1) installations water potable (Germany: KTW, DVGW); 2) liquid substances food (water, juices fruit, alcohols, milk and its dairy products, fats and oils); 3) chemicals in wide the scope (selection in contact with Tubes International Sp. with o.o.). thanks to multilayer the structure hose, where layer intermediate and outer made are with soft polyethylene, hose is very flexible. Do mounting should use fittings with spigot ("tail" for hose) not having sharp barbs, which could po clamping cut layer inner with HDPE. standards and requirements : 1) industry food, contact with food - compliant with the European requirements 1935/2004/EC and 10/2011/EU (simulant fluids A, B, C, D1, D2), 2023/2006/EC (GMP). 2) approval for water potable KTW-A (certificate German institute hygiene) and DVGW W270 (microbiological test material). Inner layer: polyethylene HDPE. layer intermediate: natural soft polyethylene PE. Reinforcement: a polyester braid. Outer layer: blue soft polyethylene PE. Working pressure: 16 bar, dependent od temperatures. Operating temperature: from -15°C to +60°C.
  • Select options This product has multiple variants. The options may be chosen on the product page / Details

    Hose ducting for exhaust gases, gases NEOPRENE 2

    All products | Ducting and ventilation hoses
    0 zł
    Light, very pliable and flexible hose intended for extraction hot vapours, fumes, gases, air blowing and discharge air cooling. reinforced version hose NEOPRENE 1, o two layers fabric impregnated neoprene and spiral steel placed between layers. resistant chemical, on radiation UV and aging. used m.in. for hot air in dryers granulate and blow-moulding machines film in processing plastics, in dryers paints in printing houses, other dryers industrial, in industry electronic, in vehicles and engines for air cooling, incineration plants, a also for extraction exhaust gases and gases welding. smooth inside (in state extended), o small radius bending enabling easy installations in tight spaces equipment and vehicles. Assembly with clamps. Other diameters are available on special order. Hose material: two fabric glass impregnated black rubber CR (neoprene® - rubber chloroprene). Reinforcement: spiral with wire steel, on outside two cable with fibre glass. Operating temperature: od -35°C up to +135°C (momentarily up to +150°C).
  • Select options This product has multiple variants. The options may be chosen on the product page / Details
    Strength hose delivery intended for conveying water industrial, sewage, sludge, etc. Inner layer: black smooth rubber SBR. Reinforcement: cord synthetic o high strength. Outer layer: black rubber SBR. Working pressure: 10 bar. Operating temperature: od -30°C up to +70°C.
  • Select options This product has multiple variants. The options may be chosen on the product page / Details

    Hose for contaminants air, dusts, dust FLEXOCOND

    All products | Ducting and ventilation hoses
    0 zł
    Very Light, flexible, having resistance to creasing hose intended for discharge air, fumes, dusts fibres, dust and other light substances. used in vacuum cleaners industrial. made with conductive polyethylene (PE) and elastomer, o low resistance material, excellent for applications in which required is avoiding accumulation charges electric (should then effectively earth hose). shaped in profile hose outer spiral reinforcing, left-handed, allows screwing on appropriate ends for vacuum cleaners with a left-hand thread e.g. ends plastic for hose EVA: DN32, 38 and 50 or appropriate ends conductive. Assembly of the hose with clamps on suitable ends, pipe spigots etc. is also possible. hose o diameter DN38 and DN50 has declaration conformity with requirements ATEX and standards TRGS 727 and It can be used in zones hazard explosion, under a condition effective earthing hose and carrying out through user analysis risk. Hose material: black special polyethylene (PE) and elastomer. Reinforcement: spiral reinforcing shaped in material hose. Operating temperature: od -20°C up to +60°C (podworking pressure depends on temperature).
  • Select options This product has multiple variants. The options may be chosen on the product page / Details

    Hose rubber for greasy substances food PANAMA®

    All products | Food and beverage hoses
    0 zł
    Strong hose delivery, o thick wall, intended for conveying substances food requiring the use of rubber free of odour and taste. Contains no phthalates or bisphenol A. hose specially designed for conveying oils and fats. Widely used in industry oil and fat. Layer outer in fully resistant to fat and aging. standards and requirements : industry food, contact with food 1935/2004/EC and 2023/2006/EC (GMP). Layer inner compliant with FDA 21 CFR 177.2600, D.M. 21/03/73. Inner layer: white NBR rubber/PVC. Reinforcement: two layer cord synthetic. Outer layer: blue rubber CR. Working pressure: 10 bar. Operating temperature: -15°C up to +90°C.
  • Select options This product has multiple variants. The options may be chosen on the product page / Details
    Very light and flexible hose delivery flat-folding for water for hydrants and pumps fire-protection, without couplings. hose hydrant compliant with the standard EN 14540 used is in hydrants internal acc. to EN-671-2. hose for pumps used is for motor pumps firefighting, rescue and services forest. besides function fire-protection Widely used in industry, construction, agriculture and mining. can serve for conveying water, water sea, water industrial, solutions some substances chemical. Layer inner smooth, resistant to mould and rotting. Layer outer (braid) o high strength, resistant to conditions atmospheric and abrasion. Available also in version yellow luminescent (DN52, DN75, 20m, for pumps). certificates (Poland): hoses compliant with conditions technical regulation MSWiA with 27.04.2010. Inner layer: insert PVC (PU for DN110). Reinforcement: a polyester braid. Working pressure: from 12 bar to 15 bar - depending on the diameter hose. Operating temperature: od -30°C up to +60°C.
  • Select options This product has multiple variants. The options may be chosen on the product page / Details
    Flexible hose delivery intended for conveying water potable cold (+23°C) and hot (+60°C). its white, mirror surface inner prevents formation biofilm on walls and is easy in maintaining cleanliness. Not affects negatively on properties health, free of is phthalates, ADI (contaminants origin animal) and other substances hazardous subject restrictions in accordance with REACH. Not causes changes properties organoleptic water even in elevated temperatures. Layer outer resistant to abrasion, ozone and conditions atmospheric. cleaning: steam water o temp. +120°C through maximum 30 min. (in system open), other (CIP) in consultation with Tubes International. standards and requirements : 1) general: EC 2002/95 (RoHS), EC 1907/2006 (REACH). 2) approval for water potable: PZH B.BK.60110.0823.2022 (valid for 10.08.2025 r.), UBA-Leitlinie, KTW, DVGW W270, D.M.174. 3) industry food, contact with food: EC 1935/2004, EC 2023/2006 (GMP); EC 10/2011 (Layer inner). Inner layer: smooth o mirror surface technopolymer. Reinforcement: a synthetic braid. Outer layer: blue technopolymer. Working pressure: from 10 bar to 20 bar, depending on the diameter hose. Operating temperature: from -30°C to +90°C.
  • Select options This product has multiple variants. The options may be chosen on the product page / Details
    Very light, very flexible and pliable hose intended for discharge aggressive vapours chemical and gases, ventilation and air conditioning. good resistance chemical on solvents and other aggressive vapours. Checking chemical resistance - the chemical resistance table for polyethylene (preliminary selection), confirmation of resistance and conditions of use - by Tubes International. resistant to hydrolysis and corrosion biological. Contains no halogen compounds or plasticisers. used mainly in industry chemical. on request available diameter in the scope 40 ÷ 610 mm. hose available in two versions: P2PE - standard and P2PE EL - conductive electrically o resistance R ≤10 4 Ω, compliant with the directive ATEX 2014/34/EU and the standard TRGS 727, made with black polyethylene. Hose material: polyethylene (PE), transparent - version standard P2PE, black - version conductive electrically P2PEEL. Wall thickness: 0.4 mm. Reinforcement: spiral with wire steel. Operating temperature: od -40°C up to +60°C.
  • Select options This product has multiple variants. The options may be chosen on the product page / Details
    Light, flexible hose medium wall thickness intended for extraction and conveying powders, grains, light granulates and other bulk materials. intended for use in industry food and pharmaceutical. used m.in. for milk in powder, grain, rice, coffee, tea, flour (version PAS). pliable, fairly compressible, almost smooth inside, flexible also in low temperatures. O sound resistance to abrasion, resistant to microbes and hydrolysis. non-toxic, Contains no halogen compounds or plasticisers. Resistant to oils and petrol. Assembly on connectors with bridge clamps (prawo-handed). Other diameters may be available on special order. hose Available is in following versions: P7 OL PU FOOD – spiral with wire steel (copper-plated); P7 L PU PAS FOOD – spiral of steel stainless, Material hose permanently antistatic (R ≤10 8 Ω, in accordance with TRGS 727). hoses P7 OL PU FOOD and P7 L PU PAS FOOD are compliant with requirements European 1935/2004/EC and 10/2011/EU (simulant E), 2023/2006/EC (GMP) and American FDA 21 CFR 177.2600 and 178.2010. are suitable for time contact with food at conveying dry, bulk, free of fat on surface, substances food - on conditions defined in declaration conformity the manufacturer (Available in Tubes International). Hose material: transparent polyether-polyurethane. Wall thickness measured between the spiral: 0.7 mm. Reinforcement: spiral with wire steel (P7 OL PU FOOD), spiral with wire of steel stainless AISI 301 (P7 L PU PAS FOOD). Operating temperature: od -40°C up to +100°C (momentarily for + 125°C).
  • Select options This product has multiple variants. The options may be chosen on the product page / Details
    Strength, light and very flexible (also in low temperatures) hose suction-delivery designed specially for industry wine for heavier conditions use. strong than hose SPIRABEL ® SNTS, o thicker wall. hose for demanding applications, intended for conveying water, beer, good win and alcohols with a concentration up to 50% and temperature up to +40°C, juices, drinks and other products food. Not contains phthalates, co allows use go also for milk and its dairy products. not recommended for oils and greasy substances food. Reinforcement spiral with hard PVC, resistant on impact, ensures very good strength on vacuum and kinking hose. transparent wall allows on easy control visual movement substances. smooth surface inner reduces losses flow and ensures ease cleaning. ease cleaning, ensures also smooth surface outer, which available in hoses for diameter 63 mm. W use not regarding direct contact with food (in industry, construction, agriculture) It can be used: 1) for light chemicals, water, sludge and sewage, other liquids (without fat, oils and hydrocarbons); 2) for air, vacuum conveying dusts, powders, granulates and other lightly abrasive substances bulk (not greasy). In that case the abrasiveness and the possible problem of static electricity must be taken into account. as hose reinforced spiral with hardened PVC (without braid) is characterized a certain elongation under pressure, co should take into account in use, especially in temperatures above +40°C. Standards and requirements: Food industry, food contact: compliant with the European requirements 1935/2004/EC and 10/2011/EU (simulant fluids A, B, C and D1), 2023/2006/EC (GMP). Hose material: transparent PVC. Reinforcement: spiral with hardened PVC. Working pressure: from 5 bar to 7 bar, depending on the diameter hose. Operating temperature: -25°C up to +60°C.
  • Select options This product has multiple variants. The options may be chosen on the product page / Details

    Very light, ecological hose ducting ECO 0.4

    All products | Ducting and ventilation hoses
    0 zł
    Very light and flexible hose intended for discharge air, dust, dusts, fine sawdust and chips, very light bulk materials etc. Dla all types industry, in particular often used for dedusting and discharge fine particles solid in industry wood, furniture, ceramic, plastics. very pliable and very compressible axially, flexible also in low temperatures. O sound resistance to abrasion, resistant also on microbes and hydrolysis. Not toxic, Contains no halogen compounds or plasticisers. Resistant to oils and petrol. hose marked is an arrow indicating correct direction flow medium. The hose wall thickness is measured between the spiral. Assembly on connectors with bridge clamps (prawo-handed). Other diameters may be available on special order. hose Available is in following versions: ECO – version standard, ECO SE – version with material flame-retardant (without classification flame retardancy), ECO AS – version permanently antistatic (ISO 8031: R 9 Ω, TRGS 727 (6.4.2.4): R 8 Ωm, directive 2014/34/EU (ATEX): It can be used in defined zones hazard explosion po analysis risk, ECO SE AS – version antistatic and flame-retardant (Available on special order). hose ECO produced is in process production compliant with with policy sustainable growth in which uses raw materials originating with recycling pure waste with process production, energy renewable, closed circulation water and other innovation. Hose material: transparent polyether-polyurethane. Reinforcement: spiral with wire steel. Wall thickness measured between the spiral: 0.4 mm. Operating temperature: od -40°C up to +100°C (momentarily for + 125°C).
  • Select options This product has multiple variants. The options may be chosen on the product page / Details
    Hose suction-delivery for demanding, versatile applications in industry food. excellent for conveying many types products food such as: olive oil, wine, beer, juices fruit, milk, fats and alcohols with a concentration up to 96%. The inner layer is free of phthalates, plasticisers and components of animal origin. Contains no phthalates or bisphenol A and no polycyclic aromatic hydrocarbons (PAH Free), in accordance with ZEK 01.4-08 Cat.1. Tested for the presence of heavy metals. Layer outer resistant to conditions atmospheric and ozone. thanks to external corrugation hose is exceptionally pliable and flexible. recommended way mounting with fitting are special clamp shell EASY SHELL, o shape adapted for serrated hose. standards and requirements : industry food, contact with food 1935/2004/EC and EC 2023/2006/EC (GMP). Layer inner compliant with FDA 21 CFR 177.2600, BfR XXI kat. 2, D.M. 21/03/73, 3-A Sanitary Standard 18-03 class II. Inner layer: white, smooth synthetic rubber. Reinforcement: cord synthetic, spirals steel. Outer layer: blue synthetic rubber. Working pressure: 10 bar. Vacuum: 0.6 bar. Operating temperature: from -30°C to +100°C.
  • Select options This product has multiple variants. The options may be chosen on the product page / Details

    Hose delivery for water TRICOFLEX, yellow

    Air and water hoses | All products
    0 zł
    Flexible hose delivery for water common use manufactured we France. multilayer in The design and strong, woven braid ensures high flexibility and no screwing facilitating hand operating a hose. very good resistance to repeated bending, crushing and stretching. low deformation under pressure. smooth Layer inner ensures good Flow rate. Layer outer resistant to abrasion, aging and radiation UV. Due to its construction especially recommended for systems irrigation in agriculture, horticulture and in construction and road engineering. Inner layer: two-layer, black PVC. Reinforcement: strong woven a polyester braid. Outer layer: two-layer yellow PVC. Working pressure: from 8 bar to 10 bar - depending on the diameter hose and temperatures. Operating temperature: od -15°C up to +60°C.
  • Select options This product has multiple variants. The options may be chosen on the product page / Details

    Hose ducting for exhaust gases, gases NEOPRENE 1

    All products | Ducting and ventilation hoses
    0 zł
    Light, single-layer, very pliable and flexible hose intended for extraction hot vapours, fumes, gases, air blowing and discharge air cooling. resistant chemical, on radiation UV and aging. used m.in. for hot air in dryers granulate and blow-moulding machines film in processing plastics, in dryers paints in printing houses, other dryers industrial, in industry electronic, in vehicles and engines for air cooling, incineration plants, a also for extraction exhaust gases and gases welding. smooth inside (in state extended), o very small radius bends enabling easy installations in tight spaces equipment and vehicles. Assembly with clamps. Other diameters are available on special order. Hose material: fabric glass impregnated black rubber CR (neoprene® - rubber chloroprene). Reinforcement: inner spiral with wire steel, outer cable with fibre glass. Operating temperature: od -35°C up to +135°C (momentarily up to +150°C).
  • Select options This product has multiple variants. The options may be chosen on the product page / Details
    Very light and flexible hose delivery flat-folding for water for pumps fire-protection, without couplings. used is for motor pumps firefighting, rescue and services forest. besides function fire-protection Widely used for conveying water in industry, construction, agriculture and mining. Layer inner smooth, resistant to mould and rotting. Layer outer (braid) o high strength, with coating polyurethane, not taking dirt, increasing resistance to abrasion and contact with flame. certificates: hoses compliant with conditions technical regulation MSWiA with 27.04.2010 r.. Inner layer: smooth polyurethane. Reinforcement: a polyester braid. Outer layer: red coating polyurethane. Working pressure: from 12 bar to 15 bar - depending on the diameter hose. Operating temperature: od -30°C up to +70°C.
  • Select options This product has multiple variants. The options may be chosen on the product page / Details
    Strength, light and flexible hose suction-delivery designed specially for industry wine for heavier conditions use. strong than hose LUISIANA, o thicker wall. hose for demanding applications. intended for conveying water, beer, good win and alcohols with a concentration up to 20%, juices, drinks and other products food. Not contains phthalates. not recommended for milk and its dairy products, oils and greasy substances food. Reinforcement spiral with hard PVC, resistant on impact, ensures very good strength on vacuum and kinking hose. transparent wall allows on easy visual control of the flow. A smooth inner surface reduces flow losses and ensures ease of cleaning. W use not regarding direct contact with food (in industry, construction, agriculture) It can be used: 1) for light chemicals, water, sludge and sewage, other liquids (without fat, oils and hydrocarbons); 2) for air, vacuum conveying dusts, powders, granulates and other lightly abrasive substances bulk (not greasy). In that case the abrasiveness and the possible problem of static electricity must be taken into account. standards and requirements : industry food, contact with food - compliant with the European requirements 1935/2004/EC and 10/2011/EU (simulant fluids A, B and C), 2023/2006/EC (GMP). Hose material: transparent PVC. Reinforcement: rigid-PVC spiral. Operating temperature: from -5°C to +60°C.
  • Select options This product has multiple variants. The options may be chosen on the product page / Details

    Hose ducting for machine CNC for machining wood P2CNC

    All products | Ducting and ventilation hoses
    0 zł
    Hose intended for discharge dusts, sawdust, chips in industry wood and furniture. designed for machine CNC for machining wood and plastics: centres machining, milling machines vertical, plotters milling. thick steel spiral coated white PVC is resistant to corrosion, has good adhesion for material hose and ensures high parameters pressure. despite strong the structure, thanks to optimal matched large surge spiral is very flexible, pliable and compressible. especially recommended for extraction dust and chips from under quickly moving heads working (CNC Router Dust Collection System). resistant to microbes, hydrolysis and oils and gasoline. Contains no halogen compounds or plasticisers. flame-retardant, compliant with the standard German DIN 4102 Class B1. hose can treat as conductive electrically po made earthing spiral, in accordance with German recommendations industrial BGI 739-2. Assembly on connectors with bridge clamps (prawo-handed). Other diameters are available on special order in the scope 80 ÷ 600 mm. Hose material: transparent polyether-polyurethane. Reinforcement: spiral with wire steel coated white PVC. Operating temperature: od -40°C up to +100°C.
  • Select options This product has multiple variants. The options may be chosen on the product page / Details

    Hose delivery for conveying water JAMAICA L

    Air and water hoses | All products
    0 zł
    Very light, flat (at rest) industrial hose delivery, PVC. thanks to appropriate matched reinforcement textile spacer polyester has good resistance to elongation. intended for pressure conveying water and other liquids. Widely used in agriculture, construction, industry marine, mining, etc. length standard roll: 50 m or 100 m. Inner layer: black PVC. Reinforcement: spacer polyester. Outer layer: blue PVC. Working pressure: from 2.5 bar to 8.5 bar - depending on the diameter hose and temperatures. Operating temperature: od -5°C up to +60°C.
  • Select options This product has multiple variants. The options may be chosen on the product page / Details

    Hose for the system exhaust BOAT ETNA

    Air and water hoses | All products
    0 zł
    Light, very flexible hose suction-delivery intended for systems exhaust cooled water engines diesel boats motor and yachts (free discharge mixed exhaust gases and water cooling). used in short sections between pipes installation. Layer inner resistant to exhaust gases. Layer outer resistant to fire and conditions atmospheric. has resistance to vacuum. compliant with certificate type Lloyds 99/00169 (E4), approved VTT in accordance with Nordic Boat Standard MC9. Inner layer: black synthetic rubber CR. Reinforcement: cord synthetic, steel spiral. Outer layer: black, corrugated synthetic rubber CR. pressure bursting: ≥ 2 bar. Operating temperature: od -30°C up to +100°C.
  • Select options This product has multiple variants. The options may be chosen on the product page / Details
    Hose intended for conveying cold water potable (+23°C - approvals KTW, DVGW - Germany, WRAS – Great Britain, D.M.174 – Italy) in industry and in use such as households domestic, campsites etc. Material layer internal o quality food, free of odour and taste ensures retention unchanged properties organoleptic water. free of phthalates. Layer outer resistant to conditions atmospheric. standards and requirements : 1) general: EC 2002/95 (RoHS), EC 1907/2006 (REACH). 2) approval for water potable: UBA-Leitlinie, KTW, DVGW W270, D.M.174, WRAS in accordance with BS 6920. 3) industry food, contact with food: 1935/2004/EC, 2023/2006/EC (GMP); 21CFR 177.1520, BfR III, 10/2011/EU (Layer inner). Inner layer: white plastomer. Reinforcement: a synthetic braid. Outer layer: blue synthetic rubber. Working pressure: 20 bar. Operating temperature: -30°C up to +60°C.
  • Select options This product has multiple variants. The options may be chosen on the product page / Details
    Light, exceptionally flexible and pliable hose o sound resistance chemical and on radiation UV. resistant to hydrolysis and corrosion biological. Contains no halogen compounds or plasticisers. intended for discharge air, vapours and gases. used in industry chemical and in systems ventilation and air conditioning in vehicles. available other diameter in the scope 30 ÷ 610 mm. Checking chemical resistance - the chemical resistance table for polypropylene (preliminary selection), confirmation of resistance and conditions of use - by Tubes International. Hose material: black soft polypropylene (PP). Wall thickness: 0.4 mm. Reinforcement: spiral with wire steel. Operating temperature: od -20°C up to +100°C.
  • Select options This product has multiple variants. The options may be chosen on the product page / Details
    Suction-delivery hose intended for conveying many light products alcoholic such as: beer, wine, cider and drinks non-alcoholic. The inner layer is free of phthalates, plasticisers and components of animal origin, co eliminates risk contamination medium and growth bacteria. Layer outer resistant to abrasion, o sound resistance to aging. standards and requirements : 1) general EU 2015/863 (RoHS 3), EC 1907/2006 (REACH). 2) industry food, contact with food 1935/2004/EC, 2023/2006/EC (GMP). Layer inner compliant with FDA 21 CFR 177.2600, D.M. 21/03/73. Inner layer: white rubber bromobutyl (BIIR). Reinforcement: cord synthetic, steel spiral. Outer layer: red EPDM rubber. Working pressure: 10 bar. Vacuum: 0.9 bar. Operating temperature: -40°C up to +120°C.
Go to Top