Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA universal pressure gauge industrial 63 mm with connection rear for installation FM 633, produced in accordance with the standard EN 837-1 in housing of steel stainless with filling glycerine. pressure gauge resistant is on shocks, vibration, moisture, o elevated resistance to sudden rises pressure, intended for straight measurements pressure liquids o low viscosity, vapours and gases, not operating corrosion on alloys copper and not crystallising. filling pressure gauge glycerine promotes reduction fluctuations indicator and reduction wear parts moving mechanism at pulsations pressure and vibration. also prevents condensation and formation atmosphere corrosion inside pressure gauge, which could damage parts internal. range measuring should select appropriate for pressure use, tak to pressure fixed or slowly changing not exceed 75% range; pressure pulsating not exceed 60% range and pulses pressure not exceeded maximum range. Diameter disc: 63 mm. Material: housing - steel AISI 304, sight glass - plexiglas, Connection - brass, mechanism - brass and alloys copper, filling - glycerine. Class accuracy: 1.6. temperature ambient: od -40°C up to +65°C. temperature medium: maximum +60°C. Connection rear: 1/4" BSP male (G 1/4 B, EN ISO 228-1, B means tolerance thread).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsNipple (Adapter) with both a BSPT male thread intended for use in pipe connections of industrial installations. Material: steel AISI 316. Working pressure: 10 bar. The given dimensions are indicative and may differ slightly depending on the manufacturer.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA DIN 3015 standard clamp, type 101 (with a top plate) intended for quick, easy, durable and aesthetic mounting of pipes, cables and hoses in various branches of industry, in above-ground and marine installations. Made in accordance with the DIN 3015 standard. The clamp is mounted to the structure by welding the clamp base (it is also possible to bolt it on or mount it on a rail). As standard, the clamp has a profiled (grooved) surface of the pipe hole. A clamp with a smooth hole surface is also available, intended for hoses and cables, marked with the letter H at the end of the index code. For dimension group 0 there is one bolt with a hexagonal head, for dimension groups 1 ÷ 6 there are two bolts with a hexagonal head. In addition to the standard metal element, you can order: extension plates, rails and bolts for mounting clamp sets. The selection of element should be consulted with TUBES INTERNATIONAL®. Material clamp: self-extinguishing polyamide. Material bolts: steel galvanized. Material plate: steel galvanized. Material base: steel carbon. Operating temperature: from -40°C to +180°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsShell clamp according to EN 14420-3 (DIN 2817) intended for securing hoses on fittings with a safety flange. DN – hose inner diameter x hose wall thickness. Material: AISI 316 steel. Working pressure: 25 bar (with an appropriately selected hose and EN 14420-3 fitting).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThree-part clamp according to DIN 20039 B, with hooks ("claws") for the fitting's safety flange and separate inserts – pressure "tongues". Material: galvanized ductile cast iron. With correct installation and an appropriately selected hose and fitting, working pressure up to 25 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsGun for removing rust and contaminants solid with hard-to-reach for grinders areas at use mineral material abrasive. Diameter grains 0.1 ÷ 0.8 mm depending on sandblasted material. version of tank with plastic o capacity 0.7 l. Diameter nozzle: 4 mm. pressure maximum: 8 bar. pressure operating: 4 ÷ 7 bar. Operating temperature: od 0°C up to +50°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAluminum A gun for compressed air, intended for removing with surfaces all contamination: liquids, fine chips, filings itp. Flow adjustment by the degree of lever press. made method casting with aluminum. A gun equipped is in standard nozzle o diameter hole 1.5 mm, replaceable, with a thread connection external M12x1.25. Instead of the standard nozzle, other nozzles can be mounted – see accessories for EWO guns. depending on connections we distinguish A gun terminated a plug EUROSTANDARD 7.2 or fitting for hose o diameter 6 mm, 9 mm and 13 mm. Material: aluminum (cast). diameter hole nozzle: 1.5 mm. pressure Maximum: 10 bar. pressure operating: 2 ÷ 8 bar. Operating temperature: from -10°C to +50°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA universal light Water gun with adjustable nozzle outlet, smooth regulation flow and a lock trigger. Available with connection: plug NiTO 1/2", plug NiTO 3/4", 1/2" male or plug CLICK 1/2". housing: high-strength plastic. nozzle: brass chrome-plated. Working pressure: 6 bar for +40°C, 4 bar for +60°C. Flow rate: 8.5 ÷ 10.5 l/min (3 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFilling gun type 222 made of glass-fiber reinforced polypropylene, intended for diesel fuel. As standard it is equipped with a 1" BSP female swivel connection that prevents hose twisting. It does not have an automatic fuel shut-off system, so it is not compatible with dispensers at fuel stations. It is not intended for AdBlue® or unleaded gasoline. Outlet diameter: 25 mm. Material: glass-fiber reinforced polypropylene. Color: black. Flow rate: 60 ÷ 80 l/min. Swivel connection: yes.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsPress P16 HP with a manual hydraulic pump drive, intended for repair workshops, service vehicles, service points, etc.. compact The design and small weight allows on performing repairs in space failure. An electric (battery) indicator of reaching the crimping diameter. All FINN-POWER crimping presses are adapted to work with interchangeable jaw sets (ordered separately). On example for range diameters crimp od 10 for 38 mm should order 8 sets jaws standard od FP-16-10 for FP-16-31, at which largest diameter crimp for 45 mm, obtained on jaws main.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsReady, flexible, reinforced four layers with wire steel line high-pressure, used in equipment for cutting and cleaning water. use hoses includes cleaning installation chemical and power, cleaning and cutting the structure concrete, surface road, cleaning surface steel. line is tested pressure and supplied of appropriate certificate. Inner layer: polyamide. Reinforcement: two compact and two loose layer wire steel. Outer layer: black polyurethane. Material fittings and ferrule: steel carbon, galvanized. Working pressure: up to 1040 bar. Operating temperature: od -30°C up to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThermal cover in the molds sleeve. strong, chemical resistant (za the exception acid hydrofluoric, phosphoric and strong bases). completely resistant na flame. high content pure silica (over 96%) ensures excellent resistance temperature, flexibility and minimal shrinkage. has properties electrical-insulating. Nie emits smoke ani fumes. wall thickness wall to ok. 1.65 mm. Material: fiber with silica (dioxide silicon). Operating temperature: up to +982°C (momentarily up to +1650°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCoupling - A tee for the SPEEDFIT system, used in compressed-air installations. The installation can be made using plastic or metal pipes (copper, brass, aluminum). Material: plastic plastic. pressure working: 10 bar (+23°C), 7 bar (+70°C). Operating temperature: from -20°C to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSheet-metal ferrule type H used for crimping hoses onto fittings that do not have a lock joining the sleeve with the fitting. It can also be used on NiTO fittings and on quick-coupling fittings. Sheet-metal ferrules can be used to crimp low-pressure hoses (up to approx. 30 bar depending on the diameter), made of various materials, provided that the hose material is soft enough for this type of crimping. Above all, rubber hoses with textile reinforcement and PVC hoses. It is also possible to crimp hoses with a steel braid (e.g. PZ type hose). The internal diameter of the ferrule should be selected to match the external diameter of the hose, while ensuring that the hole diameter at the front of the ferrule matches the fitting used. Diameter D2 - internal diameter. Diameter D3 - hole diameter. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsReinforcing sleeve, type B12, recommended when connecting plastic hoses to series B fittings with a cutting ring. Material: brass.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsType L ferrule intended for crimping a hydraulic-type fitting (fittings as for high-pressure hoses, type Z) onto industrial hoses (rubber and plastic with textile reinforcement, possibly with a reinforcing spiral – suction and delivery hoses). The ferrule should be selected taking into account the inner diameter Dw and outer diameter Dz of the hose. The ferrule length L should not exceed the length of the fitting tail Lk. Diameter D1 – outer diameter. Diameter D2 – inner diameter. Diameter D3 – lock diameter. Material: AISI 304 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA high-quality general-purpose worm-drive clamp intended for quick and easy fastening of industrial hoses, made entirely of AISI 316 stainless steel, recommended for use in the food, chemical, marine and similar industries. Manufactured in accordance with the requirements of DIN 3017 and the RoHS Directive 2002/95/EC. The ASFA-S clamp with a band width of 12 mm has greater strength and a higher permissible tightening torque than the ASFA-L clamp (9 mm), ensuring a stronger grip, and is recommended for heavier applications. The unique worm mechanism in a compact housing and the cold-formed thread in the band, smooth on the inside, ensure a secure, repeated grip without damaging the hose surface. Material: AISI 316 stainless steel (W4).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsGasket for coupling IBC for IBC containers with a thread trapezoidal (O-ring for S60x6, above a flat gasket). Material: EPDM, LDPE, PTFE, Viton or Santoprene.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsGasket socket lever coupling ANFOR. Material: rubber NR/SBR. Operating temperature: from -20°C to +50°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose delivery used as cover for cooling lines electrical in industry metallurgical. layer internal resistant na hot water cooling, water process, inhibitors corrosion and water with fluids non-freezing. layer internal and external non-conductive. resistance electrical R > 10 10 Ω/m, resistance na breakdown > 6 kV/mm. layer external resistant na aging, ozone, and heat radiation od electrical furnaces curved, self-extinguishing (compliant with the standard ASTM C-542). radius bends specified for pressure 1 bar. layer internal: black rubber EPDM. Reinforcement: textile braid. layer external: black rubber CR. pressure working: 10 bar. pressure bursting: 30 bar. Operating temperature: from -40°C to +90°C (momentarily +110°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose o elevated resistance to abrasion for use for equipment for washing pressure cold and hot water. resistant to detergents in solutions water used e.g. for washers pressure, oils, ozone and conditions atmospheric. Inner layer: black synthetic rubber. Reinforcement: single or a double steel braid. Outer layer: micro-perforated polyurethane. Working pressure: from 210 bar to 400 bar, depending on the diameter and type hose. Operating temperature: od -40°C up to +120°C (momentarily up to +155°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible hose for propane - butane and gas natural. Meets the requirements of standards ISO 3821. Inner layer: black NBR rubber. Reinforcement: two braids textile. Outer layer: orange EPDM rubber/SBR. Working pressure: 20 bar. Operating temperature: od -30°C up to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe highest quality hose freon o high diameter intended for automotive (especially trucks and buses) and industrial systems refrigerant and air-conditioning working based on freon R 134a and R404a and oils mineral and synthetic PAG and POE. Layer outer resistant to oil, abrasion, high temperature and conditions atmospheric. standards: SAE J2064 type B (dimensions SAE 100R5). assembly: use bolted or crimped fittings special. Inner layer: black rubber IIR. Reinforcement: a steel braid. Outer layer: black rubber CSM, micro-perforated. Working pressure: 35 bar. Operating temperature: od -40°C up to +125°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible hose delivery used for washing cold and warm water and for conveying light chemicals, detergents and agents disinfecting. Do use in industry food. corresponding requirements European for substances food according to regulation 1935/2004 CE and the directive 2007/19/CE (simulant fluids A, B, C). should use fittings type hydraulic (TI-Z...) appropriate crimped ferrules, or fittings fixed using two clamps, which should be tightened po first use at higher temperature. fittings and ferrules should fix po earlier heating hose in water o temperature +60°C through 30 seconds. Inner layer: white, smooth PVC. Reinforcement: cord synthetic. Outer layer: blue, smooth PVC. Working pressure: 33 bar. Operating temperature: od -15°C up to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight and flexible hose intended for discharge air, dust, dusts, sawdust, fine chips, light bulk materials etc. Specially designed according to the requirements of the wood and furniture industry, it can also be used in other industries. Antistatic and flame-retardant, it ensures a high level of work safety. pliable and flexible, also in low temperatures. less compressible than hose SMARTFLEX® 0.4, ale smoother inside. With very good abrasion resistance, also resistant to microbes and hydrolysis. Contains no halogen compounds or plasticisers. Resistant to oils and petrol. The optimal flow direction of the medium is marked with an arrow. The hose wall thickness is measured between the spiral. Assembly on connectors with bridge clamps (prawo-handed). Other diameters may be available on special order. Anti-electrostatic properties: permanently antistatic (in accordance with ISO 8031 resistance R 9 Ω, in accordance with the German technical regulations TRGS 727 (6.4.2.4) specific resistance R 8 Ωm, in accordance with directive 2014/34/EU (ATEX) it can be used in specified explosion-hazard zones - which should be preceded by a risk analysis). After effective two-sided earthing of the spiral, it can be treated as electrically conductive – in accordance with BGI 739-2 recommendations. Flame-retardant – in accordance with DIN 4102 class B1. Hose material: transparent polyether-polyurethane. Wall thickness measured between the spiral: 0.6 mm. Reinforcement: spiral with wire steel. Operating temperature: od -40°C up to +100°C (momentarily up to +125°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh quality, flexible hose in color cream, designed specially for industry pharmaceutical, biotechnology and laboratories. has high resistance fatigue, exceptionally high service life in use in pump peristaltic and good resistance na flaking („spallation” - crumbling microparticles material hose in result pressure rotor pump). is characterized also very low permeability for media gas, low level absorption conveyed products, good resistance na acids, bases and oxidation. ideal for use in processes diagnostics, sampling and culture cultures cellular in vitro, production vaccines, for bioreactors, sterile lines filling, processes fermentation, extraction and purification (purification). opaque wall hose protects sensitive products against radiation UV. hose is compliant with requirements USP Class VI and is completely nie cytotoxic, nie hemolytic and nie pyrogenic. compliant with ISO 10993 for contact with blood, fluids body and tissues for 30 dni. meets requirements NSF-51 for contact with food. possible multiple sterilization steam in autoclaves (30 min, 1 bar, 121°C), cleaning CIP and SIP installations, oxide ethylene or radiation (gamma Cobalt 60 for 5 Mrad). resistant na flame (UL 94-HB). length full roll hose 7.5 m. pressure working determined relative to pressure bursting at factor safety 1:5. Material: thermoplastic elastomer (TPE). temperature use: from -51°C to +135°C. temperature brittleness: -75°C. Hardness: 64° Shore (A). Density: 0.98 g/cm³. Note: The product is packaged in the Tubes International Clean Zone (CLEAN ROOM) in compliance with rigorous standards. Return of the product after opening the package is not possible.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose delivery, very flexible, resistant na aging, ozone, conditions weather and abrasion. intended for air, water and light chemicals: non-oxidizing, diluted acids (np. hydrochloric and sulfuric), diluted bases, solutions salts, alcohols, acetone, ketones, coolants na base glycols. Nie is suitable for oils, fuels, carbon aromatic. can be used for various paints water-soluble and na base ketones and esters. Nie is suitable for paints cellulose, chlorinated-rubber and other containing solvents aromatic (np. toluene, xylene) or gasoline. Layer inner and outer antistatic R 6 Ω in accordance with EN ISO 8031:2009. Inner layer: black rubber EPDM. Reinforcement: single or double (DN 32÷38) braid textile spiral. Outer layer: black rubber EPDM. temperature use: from -40°C to +120°C (momentarily up to +140°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA hose intended for vehicle brake systems. Made in accordance with the SAE J1401 standard. Intended for conducting pressures in hydraulics, resistant to high temperature and aggressive chemical substances, DOT3 and DOT4 brake fluid. The outer surface is also resistant to the above-mentioned substances. The hose can be used in brake systems equipped with ABS - it reduces the pulsation effect. Inner layer: PTFE. Reinforcement: a single steel braid. Working pressure: 210 bar. Operating temperature: od -40°C up to +160°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA general-purpose hydraulic hose with a reduced outer diameter and mass and increased flexibility (COMPACT type). Confirmed hose service life of 400.000 pulse cycles. standards: EN 857 2SC, SAE 100R16, ISO 11237-1. Inner layer: black, oil-resistant synthetic rubber. Reinforcement: a double steel braid. Outer layer: black, oil-resistant synthetic rubber. Working pressure: from 165 bar to 400 bar depending on the diameter hose. Operating temperature: od -40°C up to +100°C (momentarily +120°C). For water and air, the maximum working temperature is +70°C. For air above 17 bar, microperforation of the outer layer is required.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight and flexible hose o calibrated diameter outer, intended for installations pneumatic, hydraulic, oil, fuel, lubrication and chemicals. resistant to action water and oiled air. hose o elevated resistance, acc. to standards DIN 73378 (P-plasticised, H-stable thermally, L-resistant to action radii UV). standards and requirements: compliant with standards DIN 74324, concerning pneumatic systems brake vehicles road and with DIN 73378, concerning hoses polyamide used in vehicles road. When working at an elevated temperature, the pressure drop with temperature must be taken into account. Available in colours: natural, black, blue, green, red and yellow. Hose material: polyamide PA 12 (nylon). Working pressure: from 12 bar to 44 bar (depending on the diameter and wall thickness wall hose). working pressure depends on temperature. Operating temperature: od -40°C up to +80°C (for media based on water +70°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSpiral hose intended for pneumatic systems control, tools hand, robots industrial, etc. Terminated on both sides with a straight section and ends with a male BSPT thread. The stated total length is the maximum hose length after stretching. Hose material: blue polyamide PA 11/12 (nylon). Working pressure: up to 27 bar (depending on the diameter and wall thickness wall hose). Operating temperature: od -40°C up to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose PUSH-IN for products lubricating o calibrated diameter outer intended for connecting of couplings push-in PUSH-IN. Dla temperatures use above +20°C, should reduced maximum pressure working hose in accordance with value coefficient correction: (temperature use/factor correction) +20°C/1.00; +30°C/0.83; +40°C/0.72; +50°C/0.64; +60°C/0.58; +70°C/0.52; +80°C/0.47. Material: polyamide 66. Operating temperature: od 0°C up to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose suction-delivery intended for conveying water industrial, sewage, sludge, liquids non-corrosive etc. light, pliable, resistant to kinking and vacuum. Layer outer resistant to ozone and conditions atmospheric. used commonly for pumps in industry, construction and agriculture. assembly – depending on the diameter and type fittings using straps, clamps, ferrule clamping, bands. Standard length: 60 m (or 120 m - contact Tubes International). Inner layer: black rubber SBR. Reinforcement: cord synthetic, steel spiral. Outer layer: black rubber SBR. Working pressure: from 5 bar to 10 bar, depending on the diameter hose. Vacuum: 0.9 bar. Operating temperature: od -30°C up to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, semi-transparent hose smooth with PTFE o excellent resistance chemical. intended for low-pressure installations chemicals, paints, fuels, oils, greases, air, gases, water, steam and liquids na base water – we all types industry. as inert chemical and free of components, which could penetrate for medium internal, can be used for substances food. compliant with FDA 21 CFR 177.1550, EU 10/2011, EC 1935/2004 and Italian D.M. 174 06/04/2004. The hose is not antistatic (it does not dissipate electric charges for non-conductive substances). Not recommended for pneumatic push-in fittings. can be used also as mechanical guiding cables or tie rods of regard na low factor friction and self-lubricating properties PTFE. Flame-retardant (UL94 V-0) and with a high oxygen index (LOI). factor safety n = 3:1. pressure bursting and working hose, decreases in temperature use above 20°C and is dependent od jej the height. Material hose: PTFE (teflon). temperature use: from -60°C to +260°C. pressure working: from 3 bar to 56 bar - depending on diameter and wall thickness wall hose.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible pressure hose, PVC general purpose and for products food. used for compressed air, water, liquids cooling based on water, light chemicals and liquid and semi-liquid products food. smooth wall inner reduces losses flow and ensures ease cleaning. W industry food It can be used for conveying food hydrated, acidic, alcohols for 20% np. juices, drinks, beer, wine, (simulants A, B, C; up to +40°C and 0.5 h). Not recommended for milk and dairy products or food substances containing fats and oils. hose RAGNO CR complies with the European requirements 1978/142/EEC, 1935/2004/EC, 1895/2005/EC and 10/2011/EU (simulants A, B, C), 2023/2006/EC (GMP). Suitable for temporary contact with food when conveying food substances - under the conditions specified in the manufacturer's declaration of conformity (available at Tubes International). Inner layer: transparent PVC. Reinforcement: a polyester braid. Outer layer: transparent PVC. Working pressure at a temperature of 20°C: from 8 bar to 20 bar - depending on the diameter hose. The working pressure value decreases as the temperature rises. Operating temperature: from -5°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCEJN 115 quick-coupling plug with a female thread and with a valve intended for hydraulic installations at very high pressures. Used in hydraulic presses, rescue equipment, hydraulic lifts, cutters, etc. Supplied as standard with a cap to protect against contamination. Material: hardened steel, galvanized. Sealing: NBR. Flow: 6 l/min (Δp = 4 bar). Nominal diameter: 2.5 mm. Working pressure: 1000 bar (coupling connected). Burst pressure: 2600 bar. Operating temperature: from -30°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug quick coupling for hose with a nut and valve intended is for detection gases, devices medical, analyzers chemical, printing inkjet, as equipment devices optical, itp. An audible click signals a successful connection. Length L - total length. Material: acetal (O-ring NBR). Working pressure: for 8.3 bar. Operating temperature: from -40°C to +82°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe RFL L type U throttle check valve (threaded connection with an O-ring at the inlet and a push-in connection at the outlet, to the actuator) regulates the airflow in one direction. Working pressure: 10 bar. Operating temperature: from -20°C to +60°C. Medium: filtered compressed air, oiled or non-oiled.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA high-quality two-way ball valve with threads internal BSP and holes mounting in body, intended for high-pressure installations hydraulic. Material: steel (body, ball, stem). Seals: POM (ball), NBR (stem). Operating temperature: from -40°C to +100°C (POM); from -40°C to +100°C (NBR).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-pressure valve needle intended for mounting in installation or mounting panel. used mainly in heavy conditions, for sampling samples, cutting flow and for stations for testing. standard with stem type V (work valve close - open). each valve is factory tested. Coupling material: steel AISI 316. Material stem: steel AISI 316. sealing valve: metal/metal (steel AISI 316). sealing gland: PTFE or GRAFOIL. Operating temperature: up to +204°C (PTFE), up to +648°C (GRAFOIL). Working pressure: up to 690 bar. Connection: BSP female.
