Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong suction and discharge hose designed for the transport and handling of crude oil, petrochemical products, and drilling cuttings mixed with crude oil (up to 50% aromatic compounds). Inner layer made of black, smooth NBR/PVC rubber blend. Reinforced with layers of durable synthetic cord and steel spiral. It has copper wires ensuring electrical continuity between the hose ends – provided that it is properly connected to the fittings. Outer layer made of CR chloroprene rubber, flame-retardant, resistant to oil, seawater, abrasion, and weather conditions. Designed as a specialized OFFSHORE hose for operation on drilling platforms. Widely used on North Sea platforms, successfully utilized in land applications. Higher working pressure versions (20 / 27 / 30 / 35 bar) available on special order, with specified breaking strength under tension (up to 2T for 2”, 4T for 3”, and 7T for 4”, 5”, and 6”) and ABS type approval for the complete hose. Inner layer: black NBR/PVC rubber. Reinforcement: synthetic cord, steel spiral. Outer layer: black CR rubber. Working pressure: from 17 bar to 20 bar - depending on the hose diameter. Operating temperature: from -20°C to +90°C.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSuction and discharge hose intended for the transfer of aviation fuel (jet fuel, kerosene, e.g., Jet A1) and petrochemical products containing up to 50% aromatic compounds, primarily for draining fuel from aircraft tanks, loading and unloading airport tankers and fuel dispensers. The outer layer is antistatic, abrasion-resistant, oil-resistant, and weather-resistant. It features copper wires ensuring electrical continuity (R < 100 Ω) between the hose ends and dissipation of electrostatic charges. Compliant with requirements for aviation fuel hoses (type E/M) ISO 1825, API 1529:05, AS 2683, VG 95955, NFPA 407. Inner layer: black NBR rubber. Reinforcement: synthetic cord, steel spiral. Outer layer: black synthetic rubber. Working pressure: 20 bar. Vacuum: 0.85 bar. Operating temperature: from -25°C to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery strong suction-discharge hose for aviation fuel, intended for filling and emptying aircraft tanks, loading and unloading airport tankers and fuel dispensers. As a hose without metal components, it can be used for direct filling and emptying of aircraft tanks. It can be wound on reels. Suitable for aviation fuel for turbine engines (aviation kerosene, e.g., Jet A1), aviation gasoline, and fuels with aromatic hydrocarbon content up to 50%. Inner layer made of black, smooth NBR rubber. Reinforcement with layers of high-strength synthetic cord and a polymer spiral (PET). Outer layer made of black, antistatic synthetic rubber, resistant to abrasion, weather conditions, and contact with oil. Antistatic outer layer ensures the required low resistance of the hose between the ends (10^3 Ω < R < 10^6 Ω, ISO 8031). Compliant with requirements for aviation fuel hoses (type F/Ω) API 1529:05, AS 2683, VG 95955, NFPA 407. Other diameters and hoses with fluorescent markings visible at night are available upon special order. Inner layer: black NBR rubber. Reinforcement: synthetic cord, PET spiral. Outer layer: black synthetic rubber. Working pressure: 20 bar. Operating temperature: from -25°C to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHyperline FX SS AS SI WHITE hose is a lightweight, flexible Teflon hose. Due to its properties, it is recommended for the transfer of hot media and CIP applications. The hose can be supplied by the meter or as complete assemblies. The outer layer made of white silicone facilitates cleanliness maintenance. This solution also protects the operator from burns. High resistance of the inner layer to prolonged exposure to steam. At operating temperatures above +160°C, the maximum working pressure specified in the technical data should be reduced by 1% for each 1°C above this temperature. For example, at a temperature of 180°C, the maximum working pressure for hose AF-FXSS-10 is: 100 bar – (180°C-160°C) x 1 = 100 bar – 20% = 80 bar. The specified value of vacuum is defined for operating temperatures up to 150°C. The hose is standardly available in an antistatic version and is also available in a natural PTFE version. Hose material: smooth inside, corrugated outside, antistatic PTFE (Teflon). Reinforcement: single braid of AISI 304 steel with an additional protective layer of white silicone rubber. Working pressure: from 50 bar to 110 bar - depending on the hose diameter. Operating temperature: from -70°C to +204°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe HYPERLINE V (VISIFLON) hose features an inner layer made of high-quality corrugated PTFE, providing exceptional flexibility and vibration resistance. It has a polypropylene fiber braid characterized by low weight and high chemical resistance. At operating temperatures above +80°C, the maximum working pressure should be reduced by 5% for each 1°C increase in temperature. For example, at a temperature of 90ºC, the maximum working pressure for the hose AF-VFPB-19 is: 16 bar – (90°C-80°C) x 5 = 16 bar – 50% = 8 bar. There is an option to order a version with a black polymer braid (version PBB), with similar characteristics to version PB, for applications where bright colors cannot be used. Available versions: standard (orange) and antistatic (black). The antistatic Teflon of version AS contains evenly distributed carbon in the PTFE and has a resistance R <108 Ω (according to ISO 8031 annex A). This ensures the dissipation and dispersion of electric charges. Hose material: spiral corrugated PTFE (Teflon). Reinforcement: polypropylene braid. Working pressure: from 12.5 bar to 30 bar - depending on the hose diameter. Operating temperature: from -30°C to +100°C. Resistant to full vacuum up to a temperature of: +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible hose in a double version (two hoses with a welded outer layer) designed for hydraulic oil installations, gases, air, fuels, water-based fluids. Inner layer: polyester. Reinforcement: steel braid. Outer layer: micro-perforated polyurethane. Working pressure: from 180 bar to 300 bar, depending on the hose diameter. Operating temperature: from -40°C to +93°C (for water and air up to +65°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible hose in a double version (two hoses with a welded outer layer) designed for hydraulic oil installations, gases, air, fuels, water-based fluids. Standards: SAE 100R8, ISO 3949-R8. Inner layer: polyester. Reinforcement: double aramid braid. Outer layer: micro-perforated polyurethane. Working pressure: from 250 bar to 362 bar, depending on the hose diameter. Operating temperature: from -40°C to +93°C (for water and air up to +65°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible hose in a double version (two hoses with a welded outer layer) designed for hydraulic oil installations, gases, air, fuels, water-based fluids. Standards: SAE 100R8, ISO 3949-R8. Inner layer: polyester. Reinforcement: double aramid braid. Outer layer: micro-perforated polyurethane. Working pressure: from 245 bar to 350 bar, depending on the hose diameter. Operating temperature: from -40°C to +100°C (for water and air up to +70°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAntistatic hose (R < 3x104 Ω/m) designed for the transmission of non-conductive media. Inner layer: polyamide. Reinforcement: two aramid braids. Outer layer: blue polyurethane. Working pressure: 700 bar. Operating temperature: from -40°C to +100°C (for water and water-based fluids max. up to +65°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose designed for the transfer of aggressive chemical substances such as paints and solvents. Inner layer: polyamide. Reinforcement: aramid braid + steel braid. Outer layer: black polyurethane. Working pressure: 700 bar. Operating temperature: from -40°C to +100°C (for water and water-based fluids max. up to +65°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose designed for high-pressure hydraulic systems. Inner layer: polyester. Reinforcement: aramid braid + steel braid (UH-OL8M-06 - hose reinforcement consists of two aramid braids). Outer layer: black polyurethane. Working pressure: 700 bar. Operating temperature: from -40°C to +100°C (for water and water-based fluids max. up to +65°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDouble hose consisting of two strands of STANDARD type hose. Inner layer: polyester. Reinforcement: aramid braid + steel braid. Outer layer: black polyurethane. Working pressure: 700 bar. Operating temperature: from -40°C to +100°C (for water and water-based fluids max. up to +65°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible, antistatic (R<1.2x105 Ω/m) hose designed for natural gas (CNG - Compressed Natural Gas). Used for filling tanks of vehicles powered by CNG. Standards: ISO 8031, ISO 15500-17. Inner layer: conductive polyamide. Reinforcement: aramid braiding. Outer layer: microperforated polyurethane. Operating temperature: from -40°C to +82°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible hose designed for solvents, paints, isocyanates, polyols, and water-based fluids. Resistant to seawater. Micro-perforated on request (for gases and air). Installation: contact TUBES INTERNATIONAL®. Inner layer: polyamide. Reinforcement: aramid braid + steel braid. Outer layer: polyurethane. Operating temperature: from -40°C to +100°C (for water and air up to +70°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible hose designed for natural gas (CNG - Compressed Natural Gas). Used for filling tanks of vehicles powered by CNG. Available in a double version with a venting hose. Standards: ISO 15500-17. Inner layer: black conductive polyamide. Reinforcement: one or two aramid braids + synthetic braid. Outer layer: red micro-perforated polyurethane. Working pressure: 350 bar. Operating temperature: from -40°C to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible hose designed for hydraulic oil installations, gases, air, fuels, water-based fluids. Standards: SAE 100R7, ISO 3949-R7. Inner layer: polyester. Reinforcement: double polyester braid. Outer layer: micro-perforated polyurethane. Working pressure: from 155 bar to 207 bar, depending on hose diameter. Operating temperature: from -40°C to +93°C (for water and air up to +65°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible hose designed for low-pressure industrial installations. Particularly recommended for autogas (LPG - Liquefied Petroleum Gas). Used in automotive LPG systems as a connection between the tank and other system components. To maintain LPG homologation, special brass screw fittings must be installed. Standards: ECE R67-01. Installation: contact TUBES INTERNATIONAL®. Inner layer: polyamide. Reinforcement: polyester braid. Outer layer: micro-perforated polyurethane. Operating temperature: from -25°C to +125°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible hose designed for solvents, paints, isocyanates, polyols, gases, air, water-based fluids. Inner layer: polyamide. Reinforcement: polyester braid. Outer layer: microperforated polyurethane. Operating temperature: from -40°C to +93°C (for water and air up to +65°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible hose designed for solvents, paints, isocyanates, polyols, and water-based fluids. Also available in a micro-perforated version (for gases and air). Inner layer: polyamide. Reinforcement: polyester braid. Outer layer: polyurethane. Operating temperature: from -40°C to +100°C (for water and air up to +70°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible hose designed for hydraulic oil installations, gases, air, fuels, water-based fluids. Inner layer: polyester. Reinforcement: steel braid. Outer layer: micro-perforated polyurethane. Working pressure: from 97 bar to 330 bar, depending on hose diameter. Operating temperature: from -40°C to +93°C (for water and air up to +65°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible hose designed for hydraulic oil installations, gases, air, fuels, water-based fluids. Suitable for operation in high humidity and saline air environments. Standards: SAE 100R8, ISO 3949-R8. Inner layer: polyester. Reinforcement: double aramid braid. Outer layer: micro-perforated polyurethane. Working pressure: from 165 bar to 350 bar, depending on hose diameter. Operating temperature: from -40°C to +100°C (for water and air up to +70°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible hose designed for solvents, paints, isocyanates, polyols, gases, air, water-based fluids. Standards: SAE 100R8, ISO 3949-R8. Inner layer: polyamide. Reinforcement: double aramid braid. Outer layer: microperforated polyurethane. Operating temperature: from -40°C to +100°C (for water and air up to +70°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible hose designed for solvents, paints, isocyanates, polyols, gases, air, water-based fluids. Exceeds SAE 100R8, ISO 3949-R8 requirements. Installation: contact TUBES INTERNATIONAL®. Inner layer: polyamide. Reinforcement: double aramid braid. Outer layer: micro-perforated polyurethane. Operating temperature: from -40°C to +100°C (for water and air up to +70°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible hose designed for hydraulic oil installations, gases, air, fuels, water-based fluids. Resistant to seawater. Standards: SAE 100R7, ISO 3949-R7. Inner layer: polyester. Reinforcement: double polyester braid. Outer layer: micro-perforated polyurethane. Working pressure: from 155 bar to 207 bar, depending on hose diameter. Operating temperature: from -40°C to +93°C (for water and air up to +65°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible hose designed for hydraulic oil installations, gases, air, fuels, water-based fluids. Resistant to very low temperatures and seawater. Suitable for operation in high humidity and saline air environments. Standards: SAE 100R7, ISO 3949-R7. Inner layer: polyester. Reinforcement: double polyester braid. Outer layer: micro-perforated polyurethane. Working pressure: from 70 bar to 230 bar, depending on hose diameter. Operating temperature: from -54°C to +100°C (for water and air up to +70°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible hose intended for solvents, paints, isocyanates, polyols, gases, air, water-based fluids. Standards: SAE 100R18, ISO 3949-R18. Installation: use fittings type Z. Inner layer: polyamide. Reinforcement: double polyester braid. Outer layer: polyurethane. Operating temperature: from -40°C to +100°C (for water and air up to +70°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsColorless, crystal-clear, flexible hose free of odor and taste, non-toxic, phthalate-free, and BPA (Bisphenol A) free. Designed for the transfer of milk and dairy products, used in milking equipment. The smooth, non-porous inner surface of the hose eliminates the problem of fat deposition, product particles, and bacterial growth. The built-in blue tape on the hose wall assures the customer of receiving the original TYGON® S3™ M-34-R hose, specifically designed for transporting raw milk. Meets hygiene and food contact requirements: European 1935/2004/EC and 10/2011 EU (for conditions and substances according to certification), American FDA, 3-A, Japanese MHLW370(3-D). Cleaning by rinsing according to a special procedure. Compliant with REACH and California Proposition 65 - does not contain hazardous and prohibited substances. Full hose roll length: 30 m. Working pressure defined relative to burst pressure with a safety factor of 1:5. Material: PVC (special). Maximum operating temperature: up to +74°C. Brittleness temperature: -36°C. Hardness: 66° Shore (A). Density: 1.21 g/cm³. Note: Product packaged in the Clean Zone of Tubes International (CLEAN ROOM) adhering to strict standards. Return of the product after opening the packaging is not possible.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCoolant hose in the 1/4" system made of corrosion-resistant acetal, resistant to solvents, oils, and greases, providing rigidity and flexibility of the hoses. Designed for low-pressure transmission of air, water, oils, and other substances used in cooling processes and metalworking. Resistant to abrasion and vibrations, ensuring 100% positional stability and does not cause damage to cutting tools. Very easy to expand modular construction. Available lengths: 2x14.5 cm or 100 cm. Material: acetal. Working pressure: up to 3 bar. Maximum flow: 900 l/hour. Operating temperature: up to +65°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCoolant hose in a 1/2" system made of corrosion-resistant acetal, resistant to solvents, oils, and greases, providing rigidity and elasticity of the pipes. Designed for low-pressure transmission of air, water, oils, and other substances used in cooling processes and metalworking. Resistant to abrasion and vibrations, ensuring 100% positional stability and does not cause damage to cutting tools. Very easy to expand modular construction. Available lengths: 2x13.5 cm or 100 cm. Material: acetal. Working pressure: up to 2 bar. Maximum flow: 1700 l/hour. Operating temperature: up to +65°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCoolant hose in the 3/8" system made of corrosion-resistant acetal, resistant to solvents, oils, and greases, providing rigidity and elasticity of the hoses. Designed for low-pressure transmission of air, water, oils, and other substances used in cooling processes and metalworking. Resistant to abrasion and vibrations, ensuring 100% positional stability and does not cause damage to cutting tools. Very easy to expand modular construction. Available lengths: 2x14.5 cm or 100 cm. Material: acetal. Working pressure: up to 3 bar. Maximum flow: 1500 l/hour. Operating temperature: up to +65°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCoolant hose in the 1/4" system made of corrosion-resistant acetal, resistant to solvents, oils, and greases, providing rigidity and flexibility of the hoses. Designed for low-pressure transmission of air, water, oils, and other substances used in cooling processes and metalworking. Resistant to abrasion and vibrations, ensuring 100% positional stability and does not cause damage to cutting tools. Very easy to expand modular construction. Available lengths: 2x145 mm, 100 mm, 200 mm, 300 mm, 400 mm, 500 mm, 600 mm, 700 mm, 800 mm, 900 mm, and 1000 mm. Material: acetal. Working pressure: up to 3 bar. Maximum flow: 1136 l/hour. Operating temperature: up to +76°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsOil, grease, and hot chip resistant hose designed for low-pressure delivery of liquid or gaseous coolant during metal processing. It features a so-called shape memory, allowing for precise direction of the coolant flow. Supplied as ready-made hoses with an external BSP threaded connection ending with a metric external thread. Material: black PVC. Reinforcement: steel guiding cover, diameter DN 10 has an additional spiral cover made of nickel-plated steel sheet. Working pressure: 4 bar. Operating temperature: up to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose with magnetic base and valve for coolant supply - system 1/4". Components: 20 segments (L=300 mm), flat nozzle 1", valve with external thread 1/4" BSPT, and magnetic base with "tail" for 1/4" hose (end thread size 1/8" NPT). Material: acetal. Working pressure: up to 3 bar. Operating temperature: up to +65°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCoolant hose in a 3/4" system made of corrosion-resistant acetal, resistant to solvents, oils, and greases, providing rigidity and flexibility of the hoses. Designed for low-pressure transmission of air, water, oils, and other substances used in cooling processes and metalworking. Resistant to abrasion and vibrations, ensuring 100% positional stability and does not cause damage to cutting tools. Very easy to expand modular construction. Available lengths: 2x15 cm or 100 cm. Material: acetal. Working pressure: up to 1.4 bar. Maximum flow: 1900 l/hour. Operating temperature: up to +65°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible suction hose supplied as a ready-made pipe, in various lengths, with mounted fittings, intended for sewage and water. Externally corrugated, almost smooth on the inside. The special profile makes the hose resistant to vacuum and kinking (returns to its shape). As a polyethylene hose, it has very good chemical resistance and resistance to biological corrosion (rotting, decay). It is flexible at low temperatures. The hose is used for emptying septic tanks and portable toilets, in construction, tourist facilities, marinas, and airports. Available lengths: from 10 m to 25 m. Hose material: yellow polyethylene profile (PE). Reinforcement: black polyethylene profile (PE). Vacuum: 0.95 bar (for diameter 51mm ÷ 76 mm); 0.85 bar (for diameter 102 mm). Operating temperature: from -40°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible suction hose supplied as a ready-made pipe, with mounted fittings, clamp, and rope, intended for sewage and water. Externally corrugated, almost smooth on the inside. The special profile makes the hose resistant to vacuum and kinking (returns to its shape). As a polyethylene hose, it has very good chemical resistance and resistance to biological corrosion (rotting, decay). It is flexible at low temperatures. Short sections of hose, 1 m in length with fittings, are used as protective hoses, resting on the edge of the channel opening, inside which a pressure cleaning hose or inspection hose with a camera is introduced. The clamp mounted on the fitting with an attached 7.5 m rope allows for maintaining the proper position of the protective hose. Length: 1 m. Hose material: yellow polyethylene profile (PE). Reinforcement: black polyethylene profile (PE). Vacuum: 0.95 bar. Operating temperature: from -40°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCoolant hose with nozzle and valve with internal NPT thread in 1/2" system made of corrosion-resistant, solvent-resistant, oil and grease-resistant acetal, providing rigidity and elasticity of the hoses. Designed for low-pressure transmission of air, water, oils, and other substances used in cooling processes and metalworking. Resistant to abrasion and vibrations, ensuring 100% position stability and does not cause damage to cutting tools. Standard length: 350 mm. Number of segments: 14 pcs. Material: acetal. Working pressure: up to 2 bar. Maximum flow: 1700 l/hour. Operating temperature: up to +65°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCoolant hose with nozzle and valve with internal NPT thread in 1/4" system made of corrosion-resistant, solvent-resistant, oil and grease-resistant acetal, providing rigidity and elasticity of the hoses. Designed for low-pressure transmission of air, water, oils, and other substances used in cooling processes and metalworking. Resistant to abrasion and vibrations, ensures 100% position stability and does not cause damage to cutting tools. Standard length: 360 mm. Number of segments: 20 pcs. Material: acetal. Working pressure: up to 3 bar. Maximum flow: 900 l/hour. Operating temperature: up to +65°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCoolant hose with nozzle and valve with internal NPT thread in 3/8" system made of corrosion-resistant acetal, resistant to solvents, oils, and greases, providing rigidity and flexibility of the hoses. Designed for low-pressure transmission of air, water, oils, and other substances used in cooling processes and metalworking. Resistant to abrasion and vibrations, ensuring 100% positional stability and not causing damage to cutting tools. Standard length: 360 mm. Number of segments: 16 pcs. Material: acetal. Working pressure: up to 3 bar. Maximum flow: 1500 l/hour. Operating temperature: up to +65°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCoolant hose with nozzle and valve with external NPT thread in 1/2" system made of corrosion-resistant, solvent-resistant, oil and grease-resistant acetal, providing rigidity and elasticity of the hoses. Designed for low-pressure transmission of air, water, oils, and other substances used in cooling processes and metalworking. Resistant to abrasion and vibrations, ensures 100% position stability and does not cause damage to cutting tools. Standard length: 350 mm. Number of segments: 14 pcs. Material: acetal. Working pressure: up to 2 bar. Maximum flow: 1700 l/hour. Operating temperature: up to +65°C.
