Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight hose suction-delivery intended for transfer milk and substances food, demanding use rubber free of smell and taste. Nie contains plasticizers, phthalates ani substances origin animal. special The design hose "CRUSH PROOF" of spiral with plastic allows return hose pod pressure for primary shape po accidental running over go np. truck forklift. hose is light and easy for handling. hose designed primarily for unloading milk with tankers. Nie recommended for heavy conditions use in use process. standards and requirements : 1) general: EC 2002/95 (RoHS), EC 1907/2006 (REACH). 2) industry food, contact with food: EC 1935/2004, EC 2023/2006 (GMP). Layer inner compliant with D.M. 21/03/73, FDA 21 CFR 177.2600, BfR, RAL (German institute ensuring quality and certification. Inner layer: white mixture NR/NBR. Reinforcement: braid synthetic, spiral PET. Outer layer: blue rubber synthetic. pressure working: 16 bar. Vacuum: 0.7 bar. Operating temperature: from -30°C to +85°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose suction-delivery intended for transferring substances food, demanding use rubber free of smell and taste. Nie contains phthalates and bisphenol A. Layer inner with NBR/PVC resistant na used standard in industry food agents and processes cleaning. appropriate for milk and its products and fatty substances food. wide used in industry food in standard conditions use. Standards and requirements: Food industry, food contact: 1935/2004/EC and 2023/2006/EC (GMP). D.M. 21/03/73, FDA 21 CFR 177.2600, BfR XXI kat. 2. Inner layer: white rubber NBR/PVC. Reinforcement: braid synthetic, spiral steel. Outer layer: blue rubber synthetic. pressure working: 10 bar. Vacuum: 0.9 bar. Operating temperature: from -15°C to +90°C.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong hose suction-delivery with layer inner with resistant chemical polyethylene o ultra-high weight molecular (UPE, UHMWPE). Layer inner with UPE resistant na most aggressive chemicals, antistatic (R 6 Ω), compliant with requirements for hoses food, smooth, o low coefficient friction during flow, protecting deposition medium na walls. facilitates to significantly cleaning and allows na use also in industry cosmetic, pharmaceutical and food. Reinforced with synthetic cord and steel spirals. Layer outer with resistant chemical rubber EPDM, antistatic (R 6 Ω), resistant na abrasion, ozone, conditions atmospheric, fire-resistant. compliant with requirements EN 12115:11 type Ω/T, completely antistatic - ensures discharge charges electrostatic also through wall hose (R 9 Ω). allows to use hose in zones hazard explosion. hose wide used for many applications in industry chemical. standards and requirements: hoses chemical: EN 12115:2011 (type Ω/T). industry food, contact with food (Layer inner): 1935/2004/EC, 2023/2006/EC (GMP), 10/2011/EU (simulant fluids A, B, C, D2). installing: should use fitting with a spigot ("a tail" for hose) smooth, not having sharp or high notches, which could po crimping cut or damage layer inner with UPE. Diameter spigot should be precisely matched for diameter hose in order to ensuring tightness. installing sleeves clamping or clamps shell. confirmation resistance and conditions use requires contact with Tubes International, in particularly for temperatures above 50°C. Inner layer: black polyethylene UPE. Reinforcement: cord textile, spiral steel. Outer layer: black rubber EPDM. pressure working: 16 bar. Operating temperature: from -30°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose suction - delivery intended for transferring liquid products industry petrochemical containing for 50% carbon aromatic, fuels, gasoline, oil drive, heating, oils lubricating itp. Layer inner with black, smooth, antistatic (dissipating charges electrical 10 4 Ω 9 Ω) rubber NBR. Reinforced with synthetic cord and steel spirals. Layer outer with black rubber NBR, resistant na oil and conditions atmospheric. relatively small weight and flexible The design hose makes, that hose is easy for handling, is characterized wide, universal use for transferring fuels or other compatible media in typical conditions use. Inner layer: black rubber NBR. Reinforcement: cord synthetic, spirals steel. Outer layer: black rubber NBR. pressure working: 10 bar. Vacuum: 0.9 bar. Operating temperature: from -35°C to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong hose delivery RIG STAR D and suction - delivery RIG STAR SD intended is for transferring and transfer oil petroleum, products petrochemical and cuttings drilling mixed with oil petroleum (for 50% compounds aromatic). can be used also for cement, barite, water sea and brine. Layer inner with black, smooth, antistatic rubber NBR. has copper cable ensuring continuity electrical between fitting hose. Layer outer with rubber chloroprene CR, flame-retardant, resistant na abrasion, ozone, water sea and conditions atmospheric. designed as specialized hose OFFSHORE for operation na platforms drilling. wide used na platforms sea northern. can be with success used in use land. Inner layer: black rubber NBR. Reinforcement: cord synthetic, spiral steel. Outer layer: black rubber CR. pressure working: 20 bar. Vacuum: 0.9 bar. Operating temperature: from -30°C to +85°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose suction-delivery intended for transferring fuels and liquid products industry petrochemical, containing for 50% compounds aromatic, m.in. gasoline, oil drive and oil mineral. can be used for tankers, tanks, stations loading, equipment industrial. hose wide used in industry and transport in standard conditions use. Layer inner with smooth, black, antistatic (R 6 Ω/m) rubber NBR. Reinforcement cord synthetic and spiral steel. has two cable copper ensuring continuity electrical between fitting hose – pod a condition correct connection for ends. Layer outer with black rubber SBR/NBR, antistatic (R 6 Ω/m), resistant na abrasion, oil, ozone and conditions atmospheric. Inner layer: black rubber NBR. Reinforcement: cord synthetic, spiral steel. Outer layer: black rubber SBR/NBR. pressure working: 10 bar. Vacuum: 0.9 bar. Operating temperature: from -30°C to +85°C (for +100ºC for oil).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSuction-delivery hose made in accordance with technology improvement platinum, resistant na UV and ozone. compliant with requirements 1935/2004 CE, FDA 21 CFR 177.2600, USP kl. VI, European Pharmacopeia 3.1.9, BfR XV, Journal Officiel Brochure 1227. At a working temperature above +100°C, the maximum working pressure given in the tables should be reduced by 1% for each 1°C rise in temperature. factor safety is 4:1. Inner layer: semi-transparent silicone. Reinforcement: four braids polyester, spiral steel (AISI 316). Outer layer: semi-transparent silicone. Operating temperature: from -60°C to +180°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSuction-delivery hose made in accordance with technology improvement platinum. The inner layer of the hose is extruded. compliant with requirements with FDA 21 CFR 177.2600, USP kl. VI, European Pharmacopoeia 3.1.9, BfR XV, Journal Officiel Brochure 1227 and directives CE 1935/2004. maximum vacuum 736.6 mm Hg (0.98 bar). At a working temperature above +100°C, the maximum working pressure given in the tables should be reduced by 1% for each 1°C rise in temperature. Inner layer: semi-transparent silicone. Reinforcement: four braids polyester, spiral of steel AISI 316. Outer layer: semi-transparent silicone. Operating temperature: from -60°C to +180°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible hose suction-delivery intended for water, juices, beverages and other products food, reinforced has been spiral with hard PVC, through co hose gained also na lightness. additional resistant na impact spiral, ensures good strength na vacuum and kinking hose. transparent wall whereas, facilitates easy control visual flow medium, a no phthalates in material, use hose for transferring milk and its products and alcohols o concentration for 50%. not recommended is for oils and fatty substances food. smooth surface inner reduces losses flow and ensures ease cleaning. outer surface also smooth, facilitates installing ends using bands or straps, reduces damage external in result abrasion and facilitates maintaining hose in cleanliness. as hose reinforced only spiral with hard PVC, nie having braid, pod pressure undergoes certain elongation, co should take into account in use, particularly in temperatures above 40°C. Standards and requirements: Food industry, food contact: compliant with the European requirements 1935/2004/EC and 10/2011/EU (simulant fluids A, B, C and D1), 2023/2006/EC (GMP). Material hose: transparent PVC. Reinforcement: spiral with hard PVC. pressure working: from 5 bar to 7 bar, depending on diameter hose. Operating temperature: from -15°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, very flexible hose suction-delivery intended for water, juices, beverages, alcohols o concentration for 50% (and for 20% for hoses o index SO-PVCSTAR-MS), and other products food. Not recommended for food substances containing fats and oils. is suitable for milk and its products (with railway nie is suitable for milk and products milk hose o index SO-PVCSTAR-MS). Reinforcement spiral with wire steel, embedded in wall, PVC, ensures good resistance na vacuum and kinking hose. smooth surface inner reduces losses flow and ensures ease cleaning. transparent wall allows na easy control visual flow. at the absence direct contact with food (in industry, construction, agriculture) can be used for light chemicals, water, sludge and sewage, other liquids (without fat, oils and carbon). as hose without braid is characterized certain elongation pod pressure. Standards and requirements: Food industry, food contact: compliant with the European requirements 1935/2004/EC and 10/2011/EU (simulant fluids A, B, C and D1), 2023/2006/EC (GMP). Dla hoses o index SO-PVCSTAR-MS: industry food, contact with food: compliant with the European requirements 1935/2004/EC and 10/2011/EU (simulant fluids A, B and C), 2023/2006/EC (GMP). Material hose: transparent PVC. Reinforcement: spiral steel galvanized. pressure working: od 6 bar for 11.5 bar, depending on diameter hose. Operating temperature: from -15°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible, flexible and almost smooth inside hose intended for extraction and transferring dusts, powders, granulates, grain, flakes and similar light materials o properties abrasive. thanks to made with polyether–polyurethane has good resistance na abrasion, ozone, conditions atmospheric, hydrolysis and corrosion biological. is suitable for contact with food in the scope transferring bulk and liquid materials food, in this fatty or oily. Nie recommended for milk and its products. Reinforcement spiral with hard PVC ensures good resistance na crushing. version antistatic hose has copper cable anti-electrostatic embedded with outer side hose along spiral reinforcing. effective grounding cable ensures sufficient for many applications level discharge charges electrostatic. used in particularly in industry agricultural–food, plastics, materials construction itp. hose WIND STAR PU is compliant with the European requirements 10/2011/EU (simulants A, B, C, D2 and E), and American FDA 21 CFR 177.2600 „d”, „e”, „f” (dry, liquid-water, fatty). information additional regarding applications food and pharmaceutical – see section „hoses for products food”. Material hose: transparent polyether- polyurethane. Reinforcement: spiral with hard PVC. Operating temperature: from -40°C to +80°C (pressure working dependent od temperatures).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery Light, flexible hose intended for discharge air, vapours oil and fuels, dust, dusts, very fine sawdust, chips and light bulk materials. Dla all types industry, in particular often used for dedusting and discharge vapours and fine particles solid in industry wood, furniture, ceramic, plastics. very pliable and very compressible axially, flexible also in low temperatures. O sound resistance to abrasion, in version AS with polyether resistant also on microbes and hydrolysis. non-toxic, Contains no halogen compounds or plasticisers. Resistant to oils and petrol. Assembly on connectors with bridge clamps (prawo-handed). Other diameters may be available on special order. hose Available is in following versions: P2 PU – version with polyester - polyurethane, o very sound resistance to abrasion; P2 PU AS – version antistatic (R ≤10 8 Ω, compliant with TRBS 2153, for extraction also with TRGS 727), made with polyether - polyurethane, o sound resistance to abrasion, resistant to microbes and hydrolysis. Hose material: transparent polyester-polyurethane (P2 PU), polyether – polyurethane (P2 PU AS). Wall thickness measured between the spiral: 0.4 mm. Reinforcement: spiral with wire steel. Operating temperature: od -40°C up to +100°C (momentarily for + 125°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsColorless, semi-transparent, flexible hose with rubber silicone vulcanized platinum. used in industry pharmaceutical, cosmetic and biotechnology, equipment medical, culture cells, sterile lines filling, for water for injection (WFI), in chemistry and analyzers blood, in chromatography liquid. can be used in pumps peristaltic – moderate service life. is characterized exceptionally smooth surface inner prevents deposition and adhesion contamination inside hose and growth bacteria. facilitates to total cleaning and sterilization hose. smooth Layer inner reduces also resistance flow through hose. low extractability, nie toxicity, nie hemolyticity and nie pyrogenicity ensures total cleanliness liquids we sensitive use. meets requirements hygienic American FDA 21 CFR 177.2600, NSF-51, 3-A and USP Class VI and ISO 10993 for contact with blood, fluids body and tissues for 30 dni. possible sterilization steam (30 min, 1 bar, 121°C), oxide ethylene or radiation (for 2.5 Mrad). Length of a full hose roll 15 m. hose Available in sizes inch and metric. pressure working determined relative to pressure bursting at factor safety 1:5. Material: silicone (platinium). Maximum operating temperature: +204°C. temperature brittleness: -80°C. Hardness: 50° Shore (A). Density: 1.14 g/cm 3. Note: The product is packaged in the Tubes International Clean Zone (CLEAN ROOM) in compliance with rigorous standards. Return of the product after opening the package is not possible.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong hose suction - delivery with layer inner with resistant chemical polyethylene o ultra-high weight molecular (UPE, UHMWPE), black – white type MARBLE (marbled), smooth, antistatic (R 6 Ω). The inner layer is resistant to most acids and bases and many other aggressive chemicals (in elevated, ale nie very high temperatures), co makes, that hose is wide used in industry chemical and petrochemical. Layer inner with UPE type MARBLE is also compliant with requirements for hoses food, is characterized also low a coefficient friction during flow and prevents deposition medium na walls. This significantly facilitates cleaning and allows use also in the cosmetic, pharmaceutical and food industry. Reinforcement cord synthetic and spiral steel. Layer outer with resistant chemical rubber EPDM, antistatic (R 6 Ω), resistant na abrasion, ozone and conditions atmospheric. compliant with requirements EN 12115:11 (type Ω/T, completely antistatic (R 9 Ω) - ensures discharge charges electrostatic also through wall hose, co allows na use we all zones hazard explosion. standards and requirements: hoses chemical: EN 12115:2011(type Ω/T). industry food, contact with food (Layer inner): 1935/2004/EC, 2023/2006/EC (GMP), 10/2011/EU, FDA 21 CFR 177.1520 (c), D.M. 21/03/73. atmospheres explosive: directive ATEX (zones: 0, 1, 2, 20, 21, 22), EN 50014/ IEC 60079-0. assembly: should use fitting with a spigot („tail” for hose) smooth, not having sharp or high notches, which could po crimping cut or damage layer inner with UPE. The spigot diameter should be precisely matched to the hose diameter to ensure tightness. Assembly with clamping ferrules or shell clamps. Inner layer: white-black polyethylene UPE. Confirmation of resistance and application conditions requires contact with Tubes International, in particular for temperatures above 50°C. Inner layer: white-black polyethylene UPE. Reinforcement: synthetic cord, steel spiral. Outer layer: black rubber EPDM. pressure working: from 12 bar to 16 bar - depending on diameter hose. temperature use: from -35°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose HYPERLINE FX is optimal solution in use industrial, when required are large flow rates, resistance chemical and temperature, resistance na penetration. perfectly is suitable for conveying substances chemical, fuels, oils, paints, solvents, adhesives, dyes, gases and steam water, detergents, water and substances food. at temperature use above +160°C maximum pressure working given in table should reduced o 1% na each 1°C above tej temperatures. for example at temperature 180°C maximum pressure working for hose AF-FXSS-10 is: 100 bar – (180°C-160°C) x 1 = 100 bar – 20% = 80 bar. W case, when a hose PTFE flows substances, which is poor conductor and has potential properties electrification, charge electric will accumulated na internal surface PTFE and to avoid problem electricity static is used antistatic AS variant PTFE. antistatic teflon in version AS contains appropriate distributed in PTFE graphite and has resistance R 8 Ω (in accordance with the standard ISO 8031 anex A). Material hose: inside smooth, externally Serrated PTFE (teflon) - natural white and antistatic - black. Reinforcement: braid of steel AISI 304. pressure working: from 50 bar to 110 bar - depending on diameter hose. temperature use: from -70°C to +260°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsARMORVIN HNA to hose suction-delivery intended for conveying juices, drinks, milk, water, wine, beer, alcohols with a concentration up to 50% and other products food. not recommended for greasy substances such as oils. except for intended use food, can be used between other in industry, construction czy agriculture, for light chemicals, dirty water, sludge, sewage and other liquids not containing fats, oils and hydrocarbons. is suitable also for air, a embedded in wall hose steel spiral allows use go for vacuum conveying dusts, powders, granulates and other lightly abrasive substances bulk. at this kinds substances, should take into account abrasion resistance and any problem electricity static. smooth surface inner reduces losses flow and ensures ease cleaning. Standards and requirements: Food industry, food contact: compliant with the European requirements 1935/2004/EC and 10/2011/EU (simulant fluids A, B, C and D1), 2023/2006/EC (GMP). Hose material: transparent PVC. Reinforcement: galvanised steel spiral. Working pressure: from 2 bar to 7 bar - depending on the diameter hose. vacuum at 20°C: from 0.7 bar to 0.85 bar - depending on the diameter hose. Operating temperature: from -5°C to +65°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPliable and flexible, easy in handling hose suction-delivery intended for conveying greasy and non-greasy substances food, requiring the use of rubber free of odour and taste. Contains no plasticisers, phthalates or substances of animal origin. Layer inner with NBR resistant to used standard in industry food agents and processes cleaning. Layer outer resistant to momentary contact with fats animal and vegetable. especially recommended for applications demanding small radius bends at sound strength on pressure and vacuum. Widely used in industry dairy and for handling milk in ordinary conditions use. not recommended for applications transfer in heavy conditions use and at pressure pulsating. standards and requirements : 1) general: EC 2002/95 (RoHS), EC 1907/2006 (REACH). 2) industry food, contact with food: EC 1935/2004, EC 2023/2006 (GMP). Layer inner compliant with D.M. 21/03/73, FDA 21 CFR 177.2600, BfR, 3A Sanitary Standards, RAL (German institute ensuring quality and certification). Inner layer: white NBR rubber. Reinforcement: cord synthetic, steel spiral. Outer layer: blue synthetic rubber. Working pressure: 10 bar. Vacuum: 0.9 bar. Operating temperature: from -20°C to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsColorless, transparent, soft and flexible hose for applications laboratory and food. ideal for equipment analytical, condensers, incubators, desiccators, as lines for gases and drainage. Do products food and biopharmaceutical. used often also for cooling processors computers. glassy smoothed, free of pores surface inner prevents deposition and adhesion contamination inside hose and facilitates its cleaning. total repeatability parameters hose we all batches. can be used for pumps peristaltic, ale service life nie is large. hose free of is phthalates and BPA (bisphenol A). meets requirements hygienic and for contact with food: European 1935/2004/EC and 10/2011 EU (for conditions and substances acc. to certificate), American FDA, NSF-51, 3-A, USP Class VI, Japanese #370/1959. possible sterilization steam, oxide ethylene or radiation. compliant with REACH and California Proposition 65 – nie contains substances hazardous and banned. Length of a full hose roll 15 m. Available version VACUUM o thicker walls for applications vacuum. The given working pressure is determined relative to the bursting pressure at a safety factor of 1:5. Material: PVC (special). Maximum operating temperature: up to +74°C. temperature brittleness: -46°C. Hardness: 56° Shore (A). Density: 1.21 g/cm³. Note: The product is packaged in the Tubes International Clean Zone (CLEAN ROOM) in compliance with rigorous standards. Return of the product after opening the package is not possible.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong and flexible suction – delivery hose, PVC intended for water and sewage. smooth wall inner, externally lightly Serrated. good resistance to external impacts and heavier conditions use. flexible in low temperatures. used in systems irrigation, tankers and vehicles sewage, for purification sewers and emptying septic tanks. Hose material: green PVC. Reinforcement: rigid-PVC spiral. Working pressure: from 1.8 bar to 4.5 bar - depending on the diameter hose and temperatures. Operating temperature: od -25°C up to +55°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMedium wall thickness hose flexible of spiral reinforcing, intended for extraction and conveying bulk materials abrasive, granulates, chips, offcuts etc. used in various branches industry, in particular often used for discharge particles solid in industry plastics, wood, materials construction and metal. pliable and flexible, also in low temperatures. smooth inside, little compressible. dense and thick steel spiral coated white PVC ensures high parameters pressure, is resistant to corrosion and has good adhesion for material hose. hose o sound resistance to abrasion, resistant also on oils and gasoline. Assembly on connectors with bridge clamps (prawo-handed). Other diameters may be available on special order. versions: P3 PU – version standard, with polyester – polyurethane, very resistant to abrasion; P3 PU AS – version antistatic (R ≤10 8 Ω), compliant with TRBS 2153 and for extraction also with TRGS 727, with polyether – polyurethane, o sound resistance to abrasion, resistant to microbes and hydrolysis; P3 PU EL – version conductive electrically (R ≤10 4 Ω), compliant with ATEX 2014/34/EU, TRBS 2153 and for extraction also with TRGS 727, can be used in zones hazard explosion po carrying out analysis risk, made with black polyether – polyurethane, o sound resistance to abrasion, resistant to microbes and hydrolysis. Hose material: transparent polyester-polyurethane (P3 PU), transparent polyether-polyurethane (P3 PU AS), black polyether-polyurethane (P3 PU EL). Wall thickness measured between the spiral: 0.8 ÷ 1.5 mm (depending on the diameter hose). Reinforcement: spiral with wire steel coated white PVC. Operating temperature: od -40°C up to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA universal, light, very flexible hose suction-delivery, intended for applications general-industrial for water and light chemicals, other liquids (without fat, oils and hydrocarbons). It can be used also for air, vacuum conveying dusts and powders – In that case the abrasiveness and the possible problem of static electricity must be taken into account. It can be used (at temperatures up to +40°C) for liquid and semi-liquid products food such as juices, drinks, beer, wine, alcohols with a concentration up to 50%, milk and its dairy products. Not recommended for oils and greasy food substances. Reinforcement spiral with wire steel, embedded in wall with soft PVC, ensures good resistance to vacuum and kinking hose. transparent wall allows on easy visual control of the flow. As a hose reinforced only with a steel spiral (without a braid), it shows a certain elongation under pressure, which must be taken into account in use, especially at elevated temperatures. hose METALFLEX PVC complies with the European requirements 1935/2004/EC, 10/2011/EU (simulants A, B, C and D1), 2023/2006/EC (GMP) and FDA CFR 21 175.300 and 175.1210. Suitable for temporary contact with food when conveying food substances - under the conditions specified in the manufacturer's declaration of conformity (available at Tubes International). Hose material: transparent, soft PVC. Reinforcement: galvanised steel spiral. Working pressure at a temperature of 20°C: from 1 bar to 9 bar - depending on the diameter hose. As the working temperature rises, the hose's working pressure value decreases. Operating temperature: from -10°C to +65°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFree of braid version TO ( Tube Only ) hose HYPERLINE, externally spirally serrated (clockwise), a in center smooth. hose combines advantages flexible hose serrated and hose smooth o unobstructed notches flow. standard version made is with natural, semi-transparent PTFE, co allows visual control flow. version antistatic AS with PTFE with addition carbon (black) ensures discharge and dissipation charges electric for substances and conditions hazard electricity static. Material hose meets requirements FDA (21 CFR 177.1550 for hose standard, 21 CFR 178.3297 for antistatic). Flame-retardant (UL94 V-0) and with a high oxygen index (LOI). can be used for conveying substances chemical, food, fuels, oils, paints, solvents, adhesives, dyes, detergents in conditions very low pressure. fitting can be mounted crimped ferrules tube of steel stainless. dependence pressure working od temperatures for hose PTFE HYPERLINE FX without braid, applies only for temperatures 150°C. above tej temperatures occurs drop pressure working and vacuum. assuming use hose above these temperatures should to take into account and carry out appropriate test in conditions use. available versions: standard and antistatic. Material hose: PTFE (teflon). temperature use: from -70°C to +150°C (up to +260°C - pressure working hose dependent od temperatures).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose o elevated resistance to abrasion for use for equipment for washing pressure cold and hot water. resistant to detergents in solutions water used e.g. for washers pressure, oils, ozone and conditions atmospheric. Inner layer: black synthetic rubber. Reinforcement: single or a double steel braid. Outer layer: micro-perforated polyurethane. Working pressure: from 210 bar to 400 bar, depending on the diameter and type hose. Operating temperature: od -40°C up to +120°C (momentarily up to +155°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight and flexible hose intended for discharge air, dust, dusts, sawdust, fine chips, light bulk materials etc. Specially designed according to the requirements of the wood and furniture industry, it can also be used in other industries. Antistatic and flame-retardant, it ensures a high level of work safety. pliable and flexible, also in low temperatures. less compressible than hose SMARTFLEX® 0.4, ale smoother inside. With very good abrasion resistance, also resistant to microbes and hydrolysis. Contains no halogen compounds or plasticisers. Resistant to oils and petrol. The optimal flow direction of the medium is marked with an arrow. The hose wall thickness is measured between the spiral. Assembly on connectors with bridge clamps (prawo-handed). Other diameters may be available on special order. Anti-electrostatic properties: permanently antistatic (in accordance with ISO 8031 resistance R 9 Ω, in accordance with the German technical regulations TRGS 727 (6.4.2.4) specific resistance R 8 Ωm, in accordance with directive 2014/34/EU (ATEX) it can be used in specified explosion-hazard zones - which should be preceded by a risk analysis). After effective two-sided earthing of the spiral, it can be treated as electrically conductive – in accordance with BGI 739-2 recommendations. Flame-retardant – in accordance with DIN 4102 class B1. Hose material: transparent polyether-polyurethane. Wall thickness measured between the spiral: 0.6 mm. Reinforcement: spiral with wire steel. Operating temperature: od -40°C up to +100°C (momentarily up to +125°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh quality, flexible hose in color cream, designed specially for industry pharmaceutical, biotechnology and laboratories. has high resistance fatigue, exceptionally high service life in use in pump peristaltic and good resistance na flaking („spallation” - crumbling microparticles material hose in result pressure rotor pump). is characterized also very low permeability for media gas, low level absorption conveyed products, good resistance na acids, bases and oxidation. ideal for use in processes diagnostics, sampling and culture cultures cellular in vitro, production vaccines, for bioreactors, sterile lines filling, processes fermentation, extraction and purification (purification). opaque wall hose protects sensitive products against radiation UV. hose is compliant with requirements USP Class VI and is completely nie cytotoxic, nie hemolytic and nie pyrogenic. compliant with ISO 10993 for contact with blood, fluids body and tissues for 30 dni. meets requirements NSF-51 for contact with food. possible multiple sterilization steam in autoclaves (30 min, 1 bar, 121°C), cleaning CIP and SIP installations, oxide ethylene or radiation (gamma Cobalt 60 for 5 Mrad). resistant na flame (UL 94-HB). length full roll hose 7.5 m. pressure working determined relative to pressure bursting at factor safety 1:5. Material: thermoplastic elastomer (TPE). temperature use: from -51°C to +135°C. temperature brittleness: -75°C. Hardness: 64° Shore (A). Density: 0.98 g/cm³. Note: The product is packaged in the Tubes International Clean Zone (CLEAN ROOM) in compliance with rigorous standards. Return of the product after opening the package is not possible.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose suction-delivery intended for conveying water industrial, sewage, sludge, liquids non-corrosive etc. light, pliable, resistant to kinking and vacuum. Layer outer resistant to ozone and conditions atmospheric. used commonly for pumps in industry, construction and agriculture. assembly – depending on the diameter and type fittings using straps, clamps, ferrule clamping, bands. Standard length: 60 m (or 120 m - contact Tubes International). Inner layer: black rubber SBR. Reinforcement: cord synthetic, steel spiral. Outer layer: black rubber SBR. Working pressure: from 5 bar to 10 bar, depending on the diameter hose. Vacuum: 0.9 bar. Operating temperature: od -30°C up to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBlack flexible hose A universal o exceptional resistance na aging, conditions weather and ozone, o sound resistance chemical. resistant na temperature in wide the scope from -60°C to +135°C. extremely flexible, flexible, o high resistance fatigue na deformation, resistant na abrasion. excellent for use in pumps peristaltic. used for conveying and dosing in industry and services np. for dispensing soaps and agents disinfectant, agents cleaning, soda caustic, chemicals for etching and electroplating, in systems washing glass and glass panes itp. soft Material hose (61° Shore (A)) is very flexible and ensures excellent service life for 1000 hours use in pump peristaltic. hose is alternative for used often hoses with traditional mixtures rubber such jak EPDM, chloroprene. It has good chemical resistance to a range of chemical substances, especially acids and bases, oxidizing agents jak np. water oxidized, hypochlorite sodium czy ozone (300 pphm). resistant na range fats animal and vegetable. Not recommended for hydrocarbons. resistant na aging and radiation UV. is characterized low permeability for gases in comparison with hoses rubber. possible is connection hose through welding. version VACUUM o thick walls Intended is for continuous use with vacuum and is resistant na cracking and aging. Length of a full hose roll 15 m. pressure working determined relative to pressure bursting at factor safety 1:5. Material: norprene® - thermoplastic elastomer (TPE). Maximum operating temperature: +135°C. temperature brittleness: -60°C. Hardness: 61° Shore (A). Density: 0.98 g/cm 3. Note: The product is packaged in the Tubes International Clean Zone (CLEAN ROOM) in compliance with rigorous standards. Return of the product after opening the package is not possible.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible hose intended for industrial systems refrigerant (alternative for copper tubes) and air conditioning automotive (only for function filling and testing). W particular for freons (R22, R134a, R404a, R407c, R410a, R507) and oils compressor type POE and PAG. hose in sizes od 1/12" for 1/4" can be also used for conveying CO 2 (R-744) - use CO 2 as the medium refrigerant requires pressures about 10 times greater than in case conventional freons. Inner layer: polyamide (PA), for diameters od 1/12" for 1/4" blend PA with TPE (elastomer thermoplastic). Reinforcement: a polyester braid. Outer layer: micro-perforated, resistant to abrasion, polyurethane. Working pressure: from 45 bar to 120 bar, depending on the diameter hose. Operating temperature: od -45°C up to +130°C (for water and air up to +70°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose suction-delivery intended for conveying many substances chemical, mainly for solutions acids, bases, ketones, formaldehydes, alcohols industrial and glycols. often used in plants industrial for discharge contaminants water and water process. appropriate also for water sea. Layer inner and outer antistatic R≤10 6 Ω/m. Available version delivery (without spiral steel) - hose ORLANDO. Vacuum: 0.9 bar. Inner layer: black rubber EPM (EPR). Reinforcement: synthetic cord, steel spiral. Outer layer: black rubber EPM (EPR). pressure working: 10 bar. temperature use: from -40°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, very flexible and pliable hose intended for discharge aggressive chemical vapours and for use in elevated temperature. good resistance to temperature, good resistance to vapours acids and solvents. resistant also on radiation UV, ozone, hydrolysis and corrosion biological. strength on bending. used for mechanical extraction vapours, air conditioning and ventilation in vehicles mechanical (buses, cars and trailers camping, boats recreational etc.), on inlets air for engines and compressors, in dryers granulates and plastics, in blow-moulding machines film etc. Other diameters are available on special order in the scope 15 ÷ 800 mm. version flame-retardant P2SP SE is compliant with requirements standards DIN 4102 B1 for materials construction. Hose material: fabric polyester impregnated black TPE (thermoplastic elastomer). Wall thickness: 0.4 mm. Reinforcement: spiral with wire steel. Operating temperature: od -40°C up to +150°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong and flexible hose suction-delivery with completely made with resistant to abrasion polyurethane o high resistance to fats and oils. hose not contains phthalates and It can be used in industry food for conveying liquid and dry substances food. includes to: - in particular fats and oils food np. olive oil (simulant D2, up to +40°C and 30 min); - milk and its dairy products, drinks milk (simulant D1, up to +40°C and 30 min); - food hydrated, acidic, alcohol for 20 % and dry (simulants A, B, C, E; up to +70°C and 1 h). W use not involving direct contact with food (in industry, construction, agriculture) It can be used for water, light chemicals and other liquids based on fat and oils industrial (should take into account resistance chemical). used also for air, vacuum conveying dusts, powders, granulates and other abrasive substances bulk (should then take into account abrasion resistance and any problem electricity static). very smooth surface inner reduces losses conveying and ensures ease cleaning. transparent wall allows on visual control of the flow. Reinforcement dense spiral with wire steel ensures very good resistance to vacuum and kinking hose. made hose with polyurethane in comparison with similar hoses, PVC results considerably greater resistance on abrasion, greater strength (pressure working and vacuum) and greater range temperature at slightly smaller flexible. hose ARMORVIN TOTAL PU OIL TPHF complies with the European requirements 1935/2004/EC, 1895/2005/EC and 10/2011/EU (simulants A, B, C, D1, D2, E), 2023/2006/EC (GMP) and American FDA 21 CFR 177.2600 (d). Suitable for temporary contact with food when conveying food substances - under the conditions specified in the manufacturer's declaration of conformity (available at Tubes International). Hose material: transparent polyurethane. Reinforcement: galvanised steel spiral. Working pressure at a temperature of 20°C: from 3 bar to 7 bar - depending on the diameter hose. Operating temperature: from -40°C to +90°C, temperature medium, working pressure depends on temperature. As the working temperature rises, the hose's working pressure value decreases.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose HYPERLINE V (VISIFLON) made is with high quality PTFE serrated spirally, ensuring exceptional among hoses PTFE flexible, flexibility and resistance na vibration. Jak each hose PTFE, Due to the unique properties of PTFE (large operating temperature range, resistance to most substances and chemical compounds, negligible adhesion surface), hose VISIFLON perfectly is suitable for conveying substances chemical, food, fuels, oils, paints, solvents, adhesives, dyes, detergents, steam water itp. W case when identified is hazard electricity static (danger formation and accumulation charges electric, should use hoses VISIFLON made with PTFE antistatic – version antistatic AS. antistatic teflon is black (contains appropriate distributed in PTFE graphite) and has resistance R 8 Ω (in accordance with the standard ISO 8031 anex A). ensures to discharge and dissipation (dissipation) charges electric. selection hose in version standard with natural PTFE or in version antistatic should confirm in Tubes International. braid in version SS made is with annealed wire of steel stainless AISI 304 and ensures high strength pressure. at temperature use above +130°C maximum pressure working should reduced o 1% na each 1°C rise temperatures. available versions layer internal: standard (natural white) and antistatic (black). Material hose: spirally Serrated PTFE (teflon). Reinforcement: braid of steel AISI 304. pressure working: from 20 bar to 60 bar - depending on diameter hose. temperature use: from -70°C to +230°C. resistant na full vacuum for temperatures: +130°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery flexible and at the same time light hose suction-delivery intended for water, juices, drinks, alcohols with a concentration up to 20% and other products food. not advisable for greasy substances such as milk czy oils. resistant to vacuum and kinking thanks to embedded spiral with wire steel in wall hose. high advantage its is both transparent wall resistant to radiation UV, allowing on easy visual control of the flow media, as well as smooth jej internal parts reducing losses flow and ensuring ease cleaning. W ratio for hose ARMORVIN HNA is characterized greater pressure working and greater resistance on vacuum. W use not regarding direct contact with food (in industry, construction, agriculture) It can be used: 1) for light chemicals, water, sludge and sewage, other liquids (without fat, oils and hydrocarbons); 2) for air, vacuum conveying dusts, powders, granulates and other lightly abrasive substances bulk (not greasy). In that case the abrasiveness and the possible problem of static electricity must be taken into account. as hose reinforced spiral steel (without braid) is characterized a certain elongation under pressure, co should take into account in use, especially in elevated temperatures. Standards and requirements: Food industry, food contact: compliant with the European requirements 1935/2004/EC and 10/2011/EU (simulant fluids A, B and C), 2023/2006/EC (GMP). Hose material: light green transparent PVC. Reinforcement: galvanised steel spiral. Working pressure: from 2 bar to 8 bar, depending on the diameter hose. Operating temperature: from -5°C to +65°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong, flexible hose medium wall thickness, intended for discharge dust, sawdust, chips, bulk materials, granulate etc. Dla all types industry, in particular often used for discharge chips and other particles solid in industry wood, furniture, ceramic, plastics. dense spiral reinforcing ensures greater resistance to vacuum in ratio for hoses ECO 0.4 and ECO 0.6. pliable, less compressible, smooth inside and flexible - also in low temperatures. O sound resistance to abrasion, resistant also on microbes and hydrolysis. Not toxic, Contains no halogen compounds or plasticisers. Resistant to oils and petrol. hose marked is an arrow indicating correct direction flow medium. The hose wall thickness is measured between the spiral. Assembly on connectors with bridge clamps (prawo-handed). Other diameters may be available on special order. hose Available is in following versions: ECO – version standard, ECO SE – version with material flame-retardant (UL94 V-2), ECO AS – version permanently antistatic ISO 8031: R 9 Ω, TRGS 727 (6.4.2.4): R 8 Ωm, directive 2014/34/EU (ATEX): It can be used in defined zones hazard explosion po analysis risk, ECO SE AS – version antistatic and flame-retardant (Available on special order). hose ECO produced is in process production compliant with with policy sustainable growth in which uses raw materials originating with recycling pure waste with process production, energy renewable, closed circulation water and other innovation. Hose material: transparent polyether-polyurethane. Reinforcement: spiral with wire steel. Wall thickness measured between the spiral: 0.7 mm. Operating temperature: od -40°C up to +100°C (momentarily for + 125°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCream - beige flexible hose free of smell and taste, non-toxic. resistant na temperature in the scope od - 60°C up to +135°C. extremely flexible, flexible, o high resistance fatigue na deformation, resistant na abrasion. excellent for use in pumps peristaltic. used for dispensing and portioning cold and hot products food, for soaps, detergents and agents disinfecting, for paints and toners, pesticides and fertilizers and in laboratories. soft Material hose (61° Shore-A) is very flexible and ensures excellent service life for 1000 hours use in pump peristaltic. hose is alternative for used often hoses, PVC or silicone. It has good chemical resistance to a range of chemical substances, especially acids and bases, oxidizing agents jak np. water oxidized, hypochlorite sodium czy ozone. resistant na range fats animal and vegetable. Not recommended for hydrocarbons. resistant na aging and radiation UV. meets requirements FDA 21 CFR 177.2600 for contact with food. possible multiple sterilization steam in autoclaves, cleaning CIP and SIP in installations, oxide ethylene or method radiation. length full roll hose: 15 m. Material: TPE (Norprene® – thermoplastic elastomer). Maximum operating temperature: up to +135°C. temperature brittleness: -60°C. Hardness: 61° Shore (A). Density: 0.98 g/cm³. Note: The product is packaged in the Tubes International Clean Zone (CLEAN ROOM) in compliance with rigorous standards. Return of the product after opening the package is not possible.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe highest quality hose suction-delivery „FULL OHM” completely antistatic (Ω/T), intended for conveying substances highly flammable and very aggressive chemical. Layer inner with polymer perfluoroalkoxy PFA (polymer fluorine o properties close for PTFE), antistatic (R 6 Ω), mirror smooth, meeting high requirements hygienic (FDA, USP, European EU). layer intermediate with rubber synthetic, contain Reinforcement with cord synthetic and spiral with wire steel. outer Layer type MARBLE (marbled), smooth, coated polyethylene (UPE), antistatic (R 6 Ω), meeting requirements FDA, free of smell and taste, resistant na abrasion, ozone and aging, chemicals and short-term operation aggressive acids. advantage layer MARBLE is also low factor friction - hose slides and nie soils surface with which is in contact, is easy for cleaning. excellent resistance chemical PFA and properties antistatic both layer internal jak and outer (R 6 Ω) and in across wall hose (R 9 Ω) make, that hose is costly, ale technically ideal solution for applications demanding highest safety, we all zones hazard explosion (ATEX). used in industry chemical, petrochemical, pharmaceutical and cosmetic, a also in biotechnology. Nie is intended for sterilization in autoclave. Na special order Available version with additional built-in cables copper (M/T). standards and requirements: hoses chemical: EN 12115:2011. industry food, contact with food: 1935/2004/EC, 2023/2006/EC (GMP); Inner layer: 10/2011/EU, USP Class VI, FDA 21 CFR 177.1550; ISO 10993-4,-10,-11, nie cytotoxic (ISO 10993 Part 5); Outer layer: FDA 21 CFR 177.1520. Nie contains plasticizers, phthalates ani substances origin animal. atmospheres explosive: directive ATEX (zones: 0, 1, 2, 20, 21, 22), EN 50014/ IEC 60079-0. Confirmation of resistance and application conditions requires contact with Tubes International. assembly: should use fitting with a spigot („tail” for hose) smooth, not having sharp or high notches, which could po crimping cut or damage layer inner with PFA. The spigot diameter should be precisely matched to the hose diameter to ensure tightness. Assembly with clamping ferrules or shell clamps. Inner layer: black polymer PFA. Reinforcement: synthetic cord, steel spiral. Outer layer: white-black polyethylene UPE, rubber synthetic. pressure working: 10 bar. Vacuum: 0.9 bar. temperature use: from -35°C to +130°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe highest quality hose suction-delivery intended for conveying wine, beer, juices fruit etc. substances food free of fats, requiring the use of rubber free of odour and taste. Contains no phthalates or bisphenol A. Designed for high-class wines and alcohols, for use in breweries and distilleries. Widely used in the spirits industry for conveying strong alcohols with a concentration up to 96%. It has copper wires ensuring electrical continuity between the hose ends, which increases the safety of conveying high-proof, flammable alcohol (during assembly, contact of the wire with the end must be ensured). Layer outer resistant to abrasion, aging and conditions atmospheric. standards and requirements : industry food, contact with food 1935/2004/EC, 2023/2006/EC (GMP). Layer inner compliant with FDA 21 CFR 177.2600, BfR XXI kat.2, D.M. 21/03/73. Inner layer: white rubber butyl (IIR). Reinforcement: cord synthetic, steel spiral. Outer layer: red rubber butyl (IIR). Working pressure: 10 bar. Vacuum: 0.9 bar. Operating temperature: from -40°C to +120°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery light and flexible hose suction-delivery for agriculture, industry food and applications universal. intended water, light chemicals, sludge and sewage, agents protection plants, other liquids (without fat, oils and hydrocarbons). also for air, vacuum conveying dusts, powders, granulates and other lightly abrasive substances bulk (non-greasy). In that case the abrasiveness and the possible problem of static electricity must be taken into account. W industry food It can be used for conveying food hydrated, acidic, alcohols for 20% np. juices, drinks, beer, wine, (simulants A, B, C; up to +40°C). Not recommended for milk and dairy products or food substances containing fats and oils. Reinforcement with a rigid-PVC spiral, impact-resistant, provides good resistance to vacuum and kinking of the hose. The outer surface is corrugated, smooth inside. hose AGROFLEX LD complies with the European requirements 1935/2004/EC, 10/2011/EU (simulants A, B, C), 2023/2006/EC (GMP). Suitable for temporary contact with food when conveying food substances - under the conditions specified in the manufacturer's declaration of conformity (available at Tubes International). Hose material: green transparent PVC. Reinforcement: white rigid-PVC spiral. Working pressure at a temperature of 20°C: from 2 bar to 6 bar. As the working temperature rises, the hose's working pressure value decreases. Operating temperature: from -10°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCream, flexible hose chemical o multilayer the structure designed specially, to connect resistance chemical with high service life in pump peristaltic. smooth Layer inner o very sound resistance chemical, free of plasticizers, resistant na acids, bases, salts, alcohols and ketones, o low absorption and adsorption liquids na base water. Layer outer with thermoplastic elastomer (Norprene®) ensures excellent properties and high service life at use in pump peristaltic. hose meets requirements hygienic and for contact with food: American FDA 21 CFR 177.1520 and is resistant na most agents cleaning and disinfecting. sterilization steam, oxide ethylene or radiation. perfectly is suitable for dosing soaps and detergents, agents washing and for rinsing vessels. used for production and dosing various chemicals we all fields industry. Length of a full hose roll 15 m. The given working pressure is determined relative to the bursting pressure at a safety factor of 1:5. Material: polyolefin / TPE (Norprene® - thermoplastic elastomer). temperature use: from -60°C to +74°C. temperature brittleness: -60°C. Hardness: 61° Shore (A). Density: 0.98 g/cm³. Note: The product is packaged in the Tubes International Clean Zone (CLEAN ROOM) in compliance with rigorous standards. Return of the product after opening the package is not possible.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, very pliable and flexible hose intended for extraction hot vapours, fumes, gases, air blowing and discharge air cooling. reinforced version hose SILICONE 1, o two layers fabric coated silicone and spiral steel placed between layers. resistant chemical, on radiation UV and aging. used m.in. for extraction gases in industry metallurgical, foundry, industry glass and ceramic, for hot air in dryers industrial, in printing houses and paper mills, in vehicles and engines for air cooling, incineration plants, a also for extraction exhaust gases and gases welding. smooth inside (in state extended), o very small radius bends enabling easy installations in tight spaces equipment and vehicles. not recommended for continuous dynamic bending. Assembly with clamps. Other diameters are available on special order. Hose material: two fabric glass coated red silicone. Reinforcement: spiral with wire steel, double outer cable with fibre glass. Operating temperature: od -70°C up to +250°C (momentarily up to +300°C).
