Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsFairly Light, flexible and pliable, resistant to temperature two-layer hose suction intended for discharge vapours, fumes and air o high temperature. Flame-retardant, to some extent resistant to hot sparks. used at furnaces and engines for extraction gases o high temperature, in industry metallurgical, ceramic, shipbuilding, aviation, automotive and equipment military. It is characterised by high compressibility - up to 1:6, a strong construction thanks to glass fabric reinforced with stainless steel threads, and impact resistance thanks to the external spiral. Used only as a suction hose working under vacuum, due to the possibility of gases penetrating outwards under overpressure (degassing). Also available with a stainless steel spiral (from 80 mm diameter). Assembly of the hose on connectors with bridge clamps (lewo-handed). Standard length: from 2 to 10 m - contact Tubes International. Hose material: 2 layer impregnated fabric glass with fibres of steel stainless, grey. Reinforcement: outer spiral with wire and sheet steel galvanized. Operating temperature: od -50°C up to +650°C.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA light, flexible hose in a twin version (two hoses with a welded outer layer), intended for oil hydraulic systems, fuels, water-based fluids. Micro-perforated on request (for gases and air). Inner layer: polyester. Reinforcement: a steel braid. Outer layer: polyurethane. Working pressure: from 190 bar to 325 bar, depending on the hose diameter. Operating temperature: from -40°C to +100°C (for water and air up to +70°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, very flexible and pliable, resistant chemical two-layer hose intended for discharge most aggressive chemical vapours, gases, dusts and fibres (non-abrasive). very good resistance chemical on aggressive chemicals thanks to internal layer film PTFE. W version standard inner Layer white natural PTFE meets requirements industry food (FDA). W version antistatic EL black inner Layer PTFE is electrically conductive (R ≤10 6 Ω). hose is characterized high compressibility - for 1:6, strong design resistant on vibration, stretching and tearing, resistance on impacts thanks to outer spiral. resistant to radiation UV, ozone and aging. used in industry chemical and food. Also available with a stainless steel spiral (from 80 mm diameter). Assembly of the hose on connectors with bridge clamps (lewo-handed). Checking chemical resistance - the chemical resistance table for PTFE (preliminary selection), confirmation of resistance and conditions of use - by Tubes International. length standard: od 2 for 10 m. Material hose Inner layer: white foil PTFE PTFE - version standard PETEF, black conductive foil PTFE PTFE - version antistatic PETEF EL. Material hose Outer layer: fabric polyethylene coated polyethylene (PE). Reinforcement: outer spiral with wire and sheet steel galvanized. Operating temperature: od -40°C up to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible hose intended for oil hydraulic systems, gases, air, fuels, water-based fluids. standards: SAE 100R18, ISO 3949-R18. Assembly: use type Z fittings. Inner layer: polyester. Reinforcement: a double polyester braid. Outer layer: polyurethane. Working pressure: from 210 bar to 250 bar, depending on the hose diameter. Operating temperature: from -40°C to +100°C (for water and air up to +70°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA strong suction-delivery hose intended for conveying dry abrasive substances. Layer inner with white, smooth, resistant to abrasion rubber (80 mm 3 acc. to ISO 4649, formerly DIN 53516), compliant with requirements FDA 21 CFR 177.2600 for contact with food. Two built-in copper wires which, after earthing (or connection to an earthed end), discharge electric charges. Layer outer resistant to conditions atmospheric and ozone. A hose intended for conveying dry food substances: grain, sugar, powders, feed, granulates, etc. and other abrasive substances, e.g. PVC granulate, for which a white, non-staining inner layer is required. It is not intended for work in ATEX explosion-hazard zones. Standards and requirements: Food industry, food contact: 1935/2004/EC, 2023/2006/EC (GMP), BfR XXI kat.4. Standard length: 60 m (or 120 m - contact Tubes International). Inner layer: white rubber NR/SBR. Reinforcement: cord synthetic, steel spiral. Outer layer: black EPDM rubber. Working pressure: from 6 bar to 8 bar, depending on the diameter hose. Vacuum: 0.9 bar. Operating temperature: -30°C up to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible hose intended for discharge dusts, sawdust, chips, light bulk materials o properties abrasive. used in industry wood, construction, food. resistant to ozone. Wall thickness measured between the spiral. available other diameter in the scope 30 ÷ 400 mm. Hose material: transparent polyurethane. Reinforcement: copper-plated spiral with wire steel. Operating temperature: od -40°C up to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible hose intended for solvents, paints, isocyanate, polyol, gases, air, water-based fluids. Inner layer: polyamide. Reinforcement: an aramid braid + a steel braid. Outer layer: micro-perforated polyurethane. Operating temperature: from -40°C to +93°C (for water and air up to +65°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, very flexible and pliable, resistant chemical hose intended for discharge aggressive chemical vapours, gases, dusts and fibres. used mainly in industry chemical and m.in. at removal asbestos. very good resistance chemical on solvents and other aggressive vapours. resistant to hydrolysis and corrosion biological. Contains no halogen compounds or plasticisers. is characterized high compressibility - for 1:8, strong design, resistance on impacts thanks to outer spiral. Also available with a stainless steel spiral (from 80 mm diameter). Assembly of the hose on connectors with bridge clamps (lewo-handed). Checking chemical resistance - the chemical resistance table for polyethylene (preliminary selection), confirmation of resistance and conditions of use - by Tubes International. length standard: od 2 for 10 m. Hose material: fabric polyethylene coated polyethylene (PE). Reinforcement: outer spiral with wire and sheet steel galvanized. Operating temperature: od -40°C up to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible hose intended for oil hydraulic systems, gases, air, fuels, water-based fluids. Resistant to very low temperatures and harsh weather conditions. standards: SAE 100R18, ISO 3949-R18. Inner layer: polyester. Reinforcement: one or two synthetic braids. Outer layer: micro-perforated polyurethane. Working pressure: 210 bar. Operating temperature: from -55°C to +100°C (for water and air up to +70°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery light and extremely pliable hose rubber, for extraction dusts, powders and other lightly abrasive materials. Layer inner smooth, with abrasion-resistant rubber o wall thickness 2.4 mm. Layer outer corrugated, resistant to abrasion and conditions atmospheric. thanks to reinforcement spiral steel resistant to kinking and vacuum for 0.6 bar. Not is intended for use with overpressure, designed only for vacuum (extraction). Due to lightness and exceptional as on hose rubber flexible perfectly works in systems vacuum cleaning in industry, on example in quarries or smelters. It has a copper anti-electrostatic wire for discharging electric charges. Inner layer: black rubber natural. Reinforcement: cord synthetic, steel spiral. Outer layer: black rubber SBR. Vacuum: for 0.6 bar. Operating temperature: od -40°C up to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose polyurethane, reinforced spiral with wire steel, intended for discharge and conveying bulk materials, dusts and sawdust. resistant to ozone. Hose material: transparent polyurethane. Reinforcement: spiral with galvanized wire steel. Operating temperature: od -40°C up to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible hose intended for oil hydraulic systems, fuels, water-based fluids. Micro-perforated on request (for gases and air). Assembly: contact TUBES INTERNATIONAL®. Inner layer: polyester. Reinforcement: an aramid braid + a steel braid. Outer layer: polyurethane. Working pressure: from 200 bar to 425 bar - depending on the hose diameter. Operating temperature: from -40°C to +100°C (for water and air up to +70°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong and thick hose suction-delivery intended for conveying bulk substances abrasive e.g. powders, cement, granulates, abrasive etc. externally Serrated, inside smooth. Layer inner with resistant to abrasion polyurethane. is characterized good resistance on impacts external and heavy conditions use. resistant to radiation UV and low temperatures. hose has arranged next to spiral cable copper coated polyurethane, which po earthing (or connection with earthed fitting) discharges charges electrical. used in installations industrial, for handling, in construction and industry shipbuilding. Inner layer: blue polyurethane. Reinforcement: rigid-PVC spiral. Hose material: grey and violet PVC. Working pressure: from 5 bar to 6 bar - depending on the diameter hose and temperatures. Vacuum: for 0.9 bar. Operating temperature: od -20°C up to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery light and pliable hose suction-delivery intended for conveying liquid products petrochemical containing up to 30% compounds aromatic (except products based on esters). Layer outer flame-retardant, made in accordance with the standard ASTM C 542, resistant to abrasion, oil, ozone and conditions atmospheric. Inner layer: black NBR rubber. Reinforcement: cord synthetic, two spirals steel. Outer layer: black rubber CR. Working pressure: 5 bar. Vacuum: 0.5 bar. Operating temperature: od -30°C up to +120°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong and pliable hose suction - delivery for low-pressure parts installations hydraulics power, based on the requirements of the SAE J517 100 R4 standard. used in particular as hose suction and return oil. intended primarily for liquids hydraulic based on oil mineral and some synthetic liquids hydraulic. can be also used for liquids hydraulic based on water and for water at limiting temperatures up to +70°C. is suitable for conveying many liquid products industry petrochemical o low content compounds aromatic. Not recommended for gasoline, oil drive and oils based on esters phosphate. Layer inner with black, smooth, oil-resistant rubber synthetic. Reinforcement consists of layer cord synthetic and steel spiral ensuring high resistance to vacuum and very good flexible hose without kinking. Layer outer with black rubber synthetic, resistant to abrasion, conditions atmospheric and light oiling. Standard length: 60 m (or 120 m - contact Tubes International). Inner layer: black synthetic rubber. Reinforcement: cord synthetic, steel spiral. Outer layer: black synthetic rubber. Working pressure: from 2 bar to 21 bar - depending on the diameter hose. Operating temperature: od -40°C up to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA strong suction-delivery hose intended for unleaded petrol, diesel oil and liquid fuels containing up to 50% aromatic compounds. Used in industry and transport for conveying and handling petrochemical products, in road tankers, at road and rail fuel unloading and loading terminals. Layer inner with black, smooth, antistatic (R ≤ 10 6 Ω) rubber NBR (NBR1). Reinforcement layers high-strength cord and spiral steel. It has two copper wires ensuring electrical continuity between the hose ends – provided they are correctly connected to the ends. Layer outer with black, antistatic (R ≤ 10 6 Ω) rubber synthetic, self-extinguishing, resistant to abrasion, oil, ozone and conditions atmospheric. Resistance through the hose wall R ≤ 10 9 Ω (type M/T). compliant with standards EN12115:11 (16 bar), EN 1761(10 bar), ISO 2929 (10 bar), TRbF. Certified for Ex explosion-hazard zones (ATEX). excellent resistance to action products petrochemical, strong The design and properties antistatic both layer internal and outer, built-in cable antistatic, recommend this hose for demanding applications, also in explosion-hazard zones. In every case, however, use in an explosion-hazard zone (ATEX) should be preceded by a risk analysis carried out by a specialist. A version without a wire (type Ω/T) is available on special order.. Inner layer: black, smooth NBR rubber. Reinforcement: cord synthetic, steel spiral. Outer layer: black synthetic rubber. Working pressure: 16 bar. Operating temperature: od -30°C up to +90°C (momentarily up to +110°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery strong and flexible, resistant to abrasion hose suction-delivery intended for pressure conveying oils and fuels. special blend PVC, PU and NBR ensures high resistance to oil drive, biodiesel, and blue oil (fuel used in maritime navigation). Reinforcement spiral with galvanized wire steel, embedded in layer internal, PVC, ensures good resistance to vacuum and kinking hose. smooth Layer inner reduces losses flow. thanks to reinforcement a braid hose has high pressure working and small deformation under pressure. used in distribution, refuelling and handling oils and fuels, e.g. in tankers automotive for refuelling oil heating in domestic systems heating. hoses o diameters 76 ÷ 102 mm have external layer polyurethane (increasing significantly resistance to abrasion) and copper cable antistatic. Inner layer: black PVC / PU / NBR. Reinforcement: steel spiral, a polyester braid. Outer layer: black PVC / PU / NBR (diameter 19 mm ÷ 63 mm); black PU (diameter 76 mm and more). Operating temperature: od -25°C up to +60°C (working pressure depends on temperature).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible, suction-delivery hose intended for conveying liquid products industry petrochemical, containing up to 50% compounds aromatic. Layer inner antistatic R 6 Ω. It has a copper wire ensuring electrical continuity between the hose ends and discharge charges electrostatic. excellent for systems transfer and thanks to external corrugation for applications demanding small radius bending. Layer outer resistant to abrasion, oils mineral, ozone, aging, conditions atmospheric and momentary contact with carbon. used for tankers fuel and special cars for cleaning sewers. Inner layer: black NBR rubber. Reinforcement: a synthetic braid, spirals steel. Outer layer: black synthetic rubber. Working pressure: from 10 bar to 16 bar - depending on the diameter hose. Vacuum: 0.9 bar. Operating temperature: od -30°C up to +80°C (momentarily up to +120°C depending on kinds medium).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong hose suction - delivery intended for conveying and handling hot liquid asphalt, tar, products bituminous. used for loading and unloading tankers road, railway, in plants masses bituminous and in ports. Inner layer: black blend polyacrylic. Reinforcement: cord with wire steel, steel spiral. Outer layer: black synthetic rubber. Working pressure: 10 bar. Operating temperature: od -15°C up to +200°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose suction-delivery o extreme flexibility intended for conveying liquid products industry petrochemical, containing up to 60% compounds aromatic. appropriate for use in tankers automotive for transport oil drive, ethanol, gasoline, oils. Layer inner with black, smooth rubber Chemigum ® (NBR, resistance to oil: RMA class A). Reinforcement cord synthetic and two spirals with wire steel. Layer outer, deep corrugated, with black rubber synthetic Chemivic ® (NBR/PVC), resistant to action substances petrochemical, oils and greases and on abrasion. It has a copper wire ensuring electrical continuity between the hose ends – under a condition correct connection for ends. thanks to external corrugation, hose is extremely pliable, a for its bending needed is small force. its minimal radius bends, equal is diameter internal hose. external serrated reduces also resistance pulling hose po ground, a light The design facilitates operating a hose. Inner layer: black NBR rubber. Reinforcement: cord synthetic, spirals steel. Outer layer: black synthetic rubber Chemivic®. Working pressure: from 10 bar to 17 bar - depending on the diameter hose. Vacuum: 0.9 bar. Operating temperature: od -40°C up to +93°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible hose suction-delivery intended for conveying liquid products industry petrochemical. It can be used for oil drive and gasoline. standard version CARACAS recommended is for fuels o content up to 30% hydrocarbons aromatic, whereas version CARACAS 50, at more aggressive fuels (up to 50% compounds aromatic). It has a copper wire ensuring electrical continuity between the hose ends. excellent for systems transfer. Layer outer resistant is on abrasion, oil, ozone and conditions atmospheric, a thanks to corrugation, hose is very pliable and flexible – its minimal radius bends is only 2.5 x Diameter inner. is also light and easy in handling. excellent for systems transfer, tankers fuel in not very heavy external conditions use. Inner layer: black synthetic rubber. Reinforcement: a synthetic braid, spirals steel. Outer layer: black synthetic rubber. Working pressure: 6 bar. Vacuum: 0.6 bar. Operating temperature: od -20°C up to +70°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose for coolant in system 1/2" made with resistant to corrosion, solvents, oils and greases acetal, ensuring rigidity and resilient lines. intended for low-pressure conveying air, water, oils and other substances used in processes cooling and treatment metals. resistant to abrasion and vibration, ensures 100% stability position and not causes damage tools cutting. very easy in expansion modular The design. available length: 2x140 mm, 100 mm, 200 mm, 300 mm, 400 mm, 500 mm, 600 mm, 700 mm, 800 mm 900 mm and 1000 mm. Material: acetal. Working pressure: up to 2 bar. maximum Flow rate: 2173 l/h. Operating temperature: up to +76°C.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible, very pliable, hose for conveying gasoline and oil drive, fire-resistant, for small vessels - recreational boats up to 24 m long. hose o pressure working 10 bar, manufactured method mandrel. Intended for fuel systems of stationary engines on ships, motorboats, yachts etc.. Suitable for unleaded petrol, petrol with up to 10% ethanol added (E10 petrol), diesel oil and diesel oil with 10% FAME esters added (B10 – biodiesel). Compliant with ISO 7840 type A1 (fireproof, fuel vapour permeability less than or equal to 100 g/m2/24 h), compliant with directive 94/25/EC, RINA certified, compliant with SAE 1527, USCG type A1. Layer inner with black, smooth rubber synthetic, resistant to oils and fuels up to 50% content hydrocarbons aromatic. Reinforcement layers synthetic cord, a for hose POSEIDON LL additional spiral steel. Layer outer with black, self-extinguishing rubber synthetic, resistant oil and conditions atmospheric (resistance to fire: ISO 7840 Annex A: hose filled fuel should withstand flame through 2.5 min). POSEIDON : hose POSEIDON is soft a hose delivery without reinforcement spiral steel. the manufacturer recommended assembly hoses POSEIDON o diameter over 19 mm in installations in sections straight or o gentle (high) radius bends. hose is used in particular in installations filling tanks fuels boats. On special order Available hose POSEIDON o smaller diameters 6, 8.10.13.16 and 19 mm, o pressure working 10 bar. POSEIDON LL : hose POSEIDON LL has additional Reinforcement spiral steel, co ensures resistance to vacuum and kinking. hose is very pliable, its minimal radius bends corresponds only three times diameter internal and can be easily installed in tight spaces compartment engine boats. universal use and high quality hose make, that is on readily and often used through manufacturers greater yachts motor. Standard length: 60 m (or 120 m - contact Tubes International). Inner layer: black synthetic rubber. Reinforcement: cord synthetic (POSEIDON); cord synthetic, steel spiral (POSEIDON LL). Outer layer: synthetic rubber. Working pressure: 10 bar. Operating temperature: od -30°C up to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight and flexible hose suction-delivery made of special, oil-resistant blend PVC. intended for conveying oils mineral and hydrocarbons and water industrial, sewage, liquid fertilisers, some chemicals – in particular tam, where elevated resistance PVC on carbon is required. Not is suitable for hydrocarbons aromatic (benzene, toluene, xylene etc.). It can be used for some products chemical – diluted acids, bases and alcohols. hose retains its flexibility even in sub-zero temperatures use, a its low weight and small radius bending ensure convenience and ease operation. Reinforcement spiral with hard PVC, resistant on impact, ensures very good strength on vacuum and kinking hose. smooth surface inner and outer. resistant to radiation UV, ozone, conditions atmospheric, abrasion. used widely in industry, agriculture, construction and road engineering. as hose reinforced spiral with hard PVC (without braid) is characterized a certain elongation under pressure, co should take into account in use, especially in temperatures above 40°C. Hose material: blue PVC. Reinforcement: spiral with white, hard PVC. Working pressure: from 2 bar to 5 bar - depending on the diameter hose. Operating temperature: od -25°C up to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery strong, o thick wall and thick spiral, flexible hose intended vacuum extraction and conveying materials abrasive e.g. sand, gravel, grain. Dla all types industry, in particular used for loading and emptying silos, vehicles and excavators suction, handling with tankers etc. thick wall and very dense spiral reinforcing ensures high resistance to vacuum. smooth inside, not compressible, not very pliable, but flexible, also in low temperatures. O excellent resistance to abrasion, resistant also on microbes and hydrolysis. Not toxic, Contains no halogen compounds or plasticisers. Resistant to oils and petrol. hose marked is an arrow indicating correct direction flow medium. The hose wall thickness is measured between the spiral. Other diameters may be available on special order. hoses ECO 2.0 and ECO 2.5 independently od its wall thickness, differ between each other design, a co za this goes also parameters. ECO 2.0 thanks to dense spiral has greater resistance to vacuum, ale is less pliable, whereas ECO 2.5 o greater stroke spiral is more pliable and flexible, especially in greater diameters. hose ECO produced is in process production compliant with with policy sustainable growth in which uses raw materials originating with recycling pure waste with process production, energy renewable, closed circulation water and other innovation. Hose material: transparent polyether-polyurethane. Reinforcement: spiral with wire steel. Wall thickness measured between the spiral: 2.0 mm (ECO 2.0), 2.5 mm (ECO 2.5). Operating temperature: od -40°C up to +100°C (momentarily for + 125°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible, economical hose suction-delivery for applications universal. smooth inside, with outside lightly Serrated. intended for water, light chemicals, sludge and sewage, agents protection plants, other liquids (avoiding fat, oils and hydrocarbons). also for air, vacuum conveying dusts, powders, light granulates and other lightly abrasive substances bulk. In that case the abrasiveness and the possible problem of static electricity must be taken into account. Widely used in agriculture, horticulture and use domestic. Hose material: green clear PVC. Reinforcement: white rigid-PVC spiral. Vacuum at a temperature of 20°C: 0.6 bar. Operating temperature: from -20°C to +60°C. As the working temperature rises, the hose's working vacuum value decreases.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsIntended for work in installations in which the medium consists of products petroleum-based, gasoline, oil drive, oil heating, fuel aviation JET A1, kerosene. marked na bellows single yellow stripe and white letters LT. Inner layer: rubber NBR (NBR). Reinforcement: nylon cord. Outer layer: CR rubber (chloroprene). Flanges: galvanized carbon steel. Operating temperature: from -40°C to +90°C (momentarily +100°C depending on medium).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsIntended for work in installations in which the medium consists of products petroleum-based and fuels o content compounds aromatic for 50%, water cooling with oil agents anti-corrosion, oil lubricating and hydraulic, water sea. Marked na bellows yellow-blue-yellow stripe. Inner layer: rubber HNBR (NBR). Reinforcement: cord steel. Outer layer: CR rubber (chloroprene). Flanges: galvanized carbon steel. Operating temperature: from -35°C to +100°C (momentarily +120°C depending on medium).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThermoplastic hose terminated with a TEMA 100 plug, with a TA-M-120 plug and a TA-M-150 socket, TEMA 100. Hose length: 2.5 m. Operating temperature: from -40°C to +93°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsColorless, transparent, exceptionally soft and flexible, A universal hose laboratory free of phthalates (DEHP). excellent solution for complex installations equipment laboratory demanding small radii bends and repeated bends. Ten ultra soft hose is resistant na twisting and crushing and remains flexible in low temperatures (for -55°C). thanks to its softness nie requires large forces for compression consists ofc ideal solution for pumps peristaltic o low moment swivel or powered battery. is characterized greater service life in use in pump peristaltic od typical hoses silicone, having simultaneously good resistance chemical na range corrosion media (acids, bases, salts, alcohols). compliant with requirements FDA for contact with food and REACH. sterilization only oxide ethylene. Length of a full hose roll 15 m. The given working pressure is determined relative to the bursting pressure at a safety factor of 1:5. Material: PVC (special, without DEHP). Maximum operating temperature: +52°C. temperature brittleness: -55°C. Hardness: 40° Shore (A). Density: 1.1 g/cm³. Note: The product is packaged in the Tubes International Clean Zone (CLEAN ROOM) in compliance with rigorous standards. Return of the product after opening the package is not possible.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose suction-delivery for demanding, versatile applications in industry food. excellent for conveying many types products food such as: olive oil, wine, beer, juices fruit, milk, fats and alcohols with a concentration up to 96%. The inner layer is free of phthalates, plasticisers and components of animal origin. Contains no phthalates or bisphenol A and no polycyclic aromatic hydrocarbons (PAH Free), in accordance with ZEK 01.4-08 Cat.1. Tested for the presence of heavy metals. Layer outer resistant to conditions atmospheric and ozone. standards and requirements : industry food, contact with food 1935/2004/EC and EC 2023/2006/EC (GMP). Layer inner compliant with FDA 21 CFR 177.2600, BfR XXI kat. 2, D.M. 21/03/73, 3-A Sanitary Standard 18-03 class II. Inner layer: white, smooth synthetic rubber. Reinforcement: cord synthetic, steel spiral. Outer layer: blue synthetic rubber. Working pressure: 10 bar. Vacuum: 0.9 bar. Operating temperature: from -30°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsColorless, semi-transparent, strong and flexible hose reinforced a braid, intended for higher pressures. made with polyether - polyurethane, free of plasticizers, exceptionally resistant na abrasion and tearing, is characterized small radius bending and flexibility even in low temperatures. withstands cyclic changing temperatures. resistant na oils, greases and fuels and range chemicals. found use in many branches industry: conveying products abrasive and viscous, sludge and pastes, conveying granulates and powders, lubrication and degreasing, for liquids cooling in automotive, for air in pneumatics and automation industrial. used in industry food and cosmetic - meets requirements FDA 21 CFR 177.1680 and FDA 21 CFR 177.2600 for contact with food and NSF-61 for use for water drinking (with limitation length hose depending od diameter). length full roll hose 30 m (od diameter internal 31.8 mm - 15 m). pressure working determined relative to pressure bursting at factor safety 1:4. Material: tygothane® - polyurethane - polyether (PU). temperature use: from -73°C to +82°C. temperature brittleness: -73°C. Hardness: 85° Shore (A). Density: 1.12 g/cm³. Note: The product is packaged in the Tubes International Clean Zone (CLEAN ROOM) in compliance with rigorous standards. Return of the product after opening the package is not possible.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBlack, opaque, the highest quality flexible hose with rubber fluorine, resistant na solvents, fuels, oils, aggressive chemicals, also in conditions elevated temperatures. used for solvents cleaning (laundries chemical, systems recovery solvents), aggressive chemicals, acids and bases, hot oils and fuels. is suitable for pumps peristaltic. resistant na ozone, light solar and conditions atmospheric. opaque black wall hose secures completely substances sensitive na light. process production hose with annealing po vulcanization removes all residue and ensures minimal degassing, required in use vacuum and space. Length of a full hose roll 15 m. pressure working determined relative to pressure bursting at factor safety 1:5. Material: fluoroelastomer (FKM). Maximum operating temperature: +204°C. temperature brittleness: -51°C. Hardness: 60° Shore (A). Density: 1.90 g/cm 3. Note: The product is packaged in the Tubes International Clean Zone (CLEAN ROOM) in compliance with rigorous standards. Return of the product after opening the package is not possible.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, very flexible and pliable, resistant chemical and temperature-wise two-layer hose intended for discharge and conveying most aggressive chemical vapours, gases, dusts and fibres (non-abrasive), air blowing hot air. very good resistance chemical on aggressive chemicals thanks to internal layer PTFE. W version standard inner Layer white natural PTFE meets requirements industry food (FDA). W version antistatic EL black inner Layer PTFE is electrically conductive (R ≤10 6 Ω). hose is characterized high compressibility - for 1:6, strong design resistant on vibration, stretching and tearing, resistance on impacts thanks to outer spiral. resistant to radiation UV, ozone and aging. used in industry chemical, petrochemical and food. Also available with a stainless steel spiral (from 80 mm diameter). Assembly of the hose on connectors with bridge clamps (lewo-handed). Checking chemical resistance - the chemical resistance table for PTFE (preliminary selection), confirmation of resistance and conditions of use - by Tubes International. length standard: od 2 for 10 m. Material hose Inner layer: white foil PTFE PTFE - version standard HYTEF, black conductive foil PTFE PTFE - version antistatic HYTEF EL. Material hose Outer layer: black fabric polyethylene coated rubber CSM. Reinforcement: outer spiral with wire and sheet steel galvanized. Operating temperature: od -35°C up to +175°C (momentarily up to +190°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, very flexible and pliable, resistant chemical hose intended for extraction and conveying aggressive chemical vapours solvents, paints, hydrocarbons, chemicals etc. thanks to conductive rubber FKM has properties anti-electrostatic (resistance surface R 6 Ω. very good resistance to oil, substances aromatic, most acids and chemicals. excellent resistance to elevated temperature. resistant to radiation UV and ozone. is characterized high compressibility - for 1:6, strong design resistant on vibration and stretching, resistance on impacts thanks to outer spiral. used in industry paint, chemical and paper. Also available with a stainless steel spiral (from 80 mm diameter). Assembly of the hose on connectors with bridge clamps (lewo-handed). Checking chemical resistance - the chemical resistance table for FKM (preliminary selection), confirmation of resistance and conditions of use - by Tubes International. length standard: od 2 for 10 m. Hose material: fabric polyester coated FKM, antistatic, externally black. Reinforcement: outer spiral with sheet and wire steel. Operating temperature: od -25°C up to +210°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight and o excellent flexibility hose intended for discharge vapours oils, dusts, light bulk materials. resistant to microorganisms and hydrolysis. meeting requirements FDA and directives European. Hose material: transparent polyether-polyurethane. Reinforcement: spiral with wire steel. Wall thickness measured between the spiral: 0.4 mm. Operating temperature: od -40°C up to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong, thick, flexible hose intended for extraction and conveying materials abrasive: sand, gravel, rubbish, leaves and other contaminants. intended for use in cleaning streets, squares and ways. used in sweepers and other equipment services municipal and road. special The design hose P7 M STREET makes, that despite high wall thickness wall (1.4 mm) hose has smaller radius bends (1.2 x D) than standard hoses o tej wall thickness. folds hose between spiral at bending fold over on outside, co reduces resistance flow and wear. pliable, little compressible, smooth inside, flexible also in low temperatures. O sound resistance to abrasion, resistant to microbes and hydrolysis. non-toxic, Contains no halogen compounds or plasticisers. Resistant to oils and petrol. Wall thickness measured between the spiral. assembly on spigots hose clamps bridge (right-handed). Other diameters may be available on special order. Hose material: transparent and black polyether – polyurethane. Wall thickness: 1.4 mm. Reinforcement: spiral with wire steel. Operating temperature: od -40°C up to +100°C (momentarily up to +125°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, very pliable and flexible, resistant to kinking hose intended for oil hydraulic, liquids based on water and other media. used in systems measurement, control, hydraulic systems brake in bicycles and micro-hydraulics (systems opening roofs automotive). Layer outer with resistant to abrasion polyurethane or with polyamide and micro-perforated, co allows use hose for media gas. hose has resistance to vacuum for 0.93 bar. temperature above 80°C can reduce service life hose. hose DN2 with polyamide (ZC-TEST8-5021PA) passed positively tests pulse 1 million cycles. Inner layer: polyester or polyamide. Reinforcement: single an aramid braid. Outer layer: black polyurethane or polyamide. Working pressure: from 412 bar to 500 bar, depending on the diameter and type hose. Operating temperature: od -40°C up to +100°C (for water and air up to +70°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSuction-delivery hose made in accordance with technology improvement platinum. sterilization steam (max. +135°C under pressure 3.5 bar through 30 min.). Layer inner Meets the requirements of FDA, USP kl.VI, D.M. 21/03/73 and regulation WE nr 10/2011. Layer outer meets requirements USP kl. VI, FDA and European Pharmacopoeia. hose compliant with EC 1935/2004 and 2023/2006/EC (GMP). free of substances origin animal, phthalates, adipates and materials subject restrictions the directive EC 1907/2006 (REACH). Safety factor 3:1. stated radius bends: refers to pressure static. pressure working (20°C): from 4 bar to 10 bar, depending on the diameter hose. Inner layer: white smooth fluoropolymer PFA. dynamic. Reinforcement: braids polyester, spiral of steel AISI 302. Outer layer: transparent silicone. Operating temperature: od -30°C up to +150°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible, reinforced a braid polyester hose free of smell and taste, non-toxic, nie containing phthalates and BPA (bisphenol A). intended for conveying and dispensing products food pod higher pressure. smooth, non-porous surface inner hose eliminates problem settling particles product and growth bacteria. resistant na action alkaline agents cleaning. meets requirements hygienic and for contact with food: European 1935/2004/EC and 10/2011 EU (for conditions and substances acc. to certificate), American FDA, NSF-51, NSF-61, 3-A, Japanese #370/1959 and MHLW370(3-D). compliant with REACH and California Proposition 65 - nie contains substances hazardous and banned. possible sterilization oxide ethylene. Po mounting ends o appropriate hygienic the structure possible is cleaning method CIP. Length of a full hose roll 15 m (od diameter internal 38.1 mm - 6 m). pressure working determined relative to pressure bursting at factor safety 1:4. Material: PVC (special). Maximum operating temperature: up to +74°C. temperature brittleness: -36°C. Hardness: 66° Shore (A). Density: 1.21 g/cm³. Note: The product is packaged in the Tubes International Clean Zone (CLEAN ROOM) in compliance with rigorous standards. Return of the product after opening the package is not possible.
