Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-pressure hydraulic adapter, type A101, with external BSP threads (60° cone sealing). Material: carbon steel, galvanized.- Select options This product has multiple variants. The options may be chosen on the product page / Details1/4" flat angle spray nozzle with external BSPT thread for mounting, e.g., with a lance (connection via coupling). Material: stainless steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSet of interchangeable seals for compact actuator ISO 21287, LINER series. Material: polyurethane. Diameter: 32 ÷ 63.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVentilated extension lance with thermal insulation, designed for high-pressure washer. Length: 400 mm. Connections: (inlet) GZ 1/4" BSP / (outlet) GZ 1/4" BSP. Working pressure: up to 310 bar. Maximum pressure: 350 bar. Flow rate: 45 l/min. Operating temperature: up to +160°C. Material: stainless steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLeft-handed bridge worm clamp with a band width of 9 and 12 mm designed for quick and easy multiple fastening of hoses reinforced with a steel spiral, e.g., ventilation hoses. The purpose of the bridge is to encompass the spiral wire and ensure precise adherence of the clamp to the hose. The use of the bridge in the clamp provides a tight and non-damaging connection to the hose. The left-handed OML clamp is intended for mounting CLIP type hoses (hoses of this type are made from impregnated fabric, and the left-wound spiral is made from sheet metal and steel wire) e.g., KEVLAR SI CL, SILICON CL, TEFLON CL, GRIPFLEX. The unique worm mechanism of the clamp in a compact housing and the cold-extruded thread in the band, smooth on the inside, ensure a secure multiple grip without damaging the hose surface. The number of segments depends on the minimum/maximum diameter of the clamp. Material: AISI 316 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAKBO BIG FLOW hot water gun with increased flow rate. Made of stainless steel, insulated trigger, EPDM rubber covers, Viton seals. Use with hot water requires special caution. Not intended for steam! Connection: 1/2" BSP. Working pressure: 24 bar. Flow rate: 120 l/min. Operating temperature: up to +95°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMultiple lower plate for welding for the assembly of DIN 3015 standard type 100/101. For size group 0 ÷ 3, number of clamps: 10. For size group 4 ÷ 5, number of clamps: 5. For size group 0, there is one hole for a screw. For size group 1 ÷ 6, there are two holes for screws. Material: carbon steel or AISI 316L steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSAE 6000 backing flange with socket for welding to connect with flange fitting, without fastening screws and sealing. Material: carbon steel, galvanized. Operating temperature: from -20°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA steel wire spiral protecting the fitting from external mechanical damage, which extends the lifespan of the hose.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPressure sleeve, type FM, placed in the nut, allows for proper compression of the metric pipe to the fitting (coupling). Material: AISI 316 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsScrewed sleeve for thermoplastic hoses type SAE100R7, MT1, MTH1, OL7M or VE7M. Use only with a screwed fitting from the same supplier (TI-S...). Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsProfiled gasket according to DIN 3869 for high-pressure connections with metric and/or inch threads according to DIN 3852-11E. Material: Viton, hardness 80 according to Shore.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible medium-thickness hose designed for the extraction and transport of powders, grains, light granules, and other bulk materials. Intended for use in the food and pharmaceutical industries. Used, among others, for powdered milk, grains, rice, coffee, tea, flour (PAS version). Flexible, fairly compressible, almost smooth inside, elastic even at low temperatures. Good abrasion resistance, resistant to microbes and hydrolysis. Non-toxic, free from halogen compounds and plasticizers. Resistant to oils and gasoline. Installation on couplings with bridge clamps (right-handed). Other diameters may be available upon special request. The hose is available in the following versions: P7 OL PU FOOD – steel wire (copper-plated) spiral; P7 L PU PAS FOOD – stainless steel spiral, hose material permanently antistatic (R ≤108 Ω, according to TRGS 727). The P7 OL PU FOOD and P7 L PU PAS FOOD hoses comply with European requirements 1935/2004/EC and 10/2011/EU (simulant E), 2023/2006/EC (GMP), and American FDA 21 CFR 177.2600 and 178.2010. Suitable for temporary contact with food during the transport of dry, bulk, non-fatty food substances - under the conditions specified in the manufacturer's declaration of conformity (available from Tubes International). Hose material: transparent polyether-polyurethane. Wall thickness measured between the spiral: 0.7 mm. Reinforcement: steel wire spiral (P7 OL PU FOOD), stainless steel AISI 301 wire spiral (P7 L PU PAS FOOD). Operating temperature: from -40°C to +100°C (temporarily up to +125°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible hose designed for hydraulic oil installations, gases, air, fuels, water-based fluids. Inner layer: polyester. Reinforcement: aramid braid + steel braid. Outer layer: micro-perforated polyurethane. Working pressure: from 175 bar to 500 bar, depending on hose diameter. Operating temperature: from -40°C to +93°C (for water and air up to +65°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDurable, lightweight, and highly flexible (even at low temperatures) suction and discharge hose designed specifically for the wine industry for heavier working conditions. Stronger than the SPIRABEL® SNTS hose, with a thicker wall. A hose for demanding applications, intended for the transfer of water, beer, quality wines, and spirits with concentrations up to 50% and temperatures up to +40°C, juices, beverages, and other food products. Phthalate-free, allowing it to be used for milk and its derivatives. Not recommended for oils and fatty food substances. Reinforced with a hard PVC spiral, resistant to impacts, provides very good resistance to vacuum and hose collapse. The transparent wall allows for easy visual monitoring of the substance flow. The smooth inner surface reduces flow losses and ensures ease of cleaning. The ease of cleaning is also provided by the smooth outer surface, which is available in hoses up to 63 mm in diameter. In applications not involving direct contact with food (in industry, construction, agriculture), it can be used: 1) for light chemicals, water, sludges, and wastewater, other liquids (without fats, oils, and hydrocarbons); 2) for air, vacuum transfer of dust, powders, granules, and other lightly abrasive bulk substances (non-fatty). Abrasiveness and potential static electricity issues should be considered. As a hose reinforced with a hardened PVC spiral (without a braid), it exhibits some elongation under pressure, which should be taken into account in applications, especially at temperatures above +40°C. Standards and requirements: Food industry, food contact: Compliant with European requirements 1935/2004/EC and 10/2011/EU (simulant fluids A, B, C, and D1), 2023/2006/EC (GMP). Hose material: transparent PVC. Reinforcement: hardened PVC spiral. Working pressure: from 5 bar to 7 bar, depending on the hose diameter. Operating temperature: -25°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-quality quick-connect water plug NiTO 3/4" with external thread, for NiTO I gun. Material: chrome-plated brass. Working pressure: up to 25 bar. Operating temperature: up to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBand-It® Standard system tape fasteners. Fasteners with so-called "ears" secure the end of the tape after bending. Material: AISI 304 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal ball valve type 4354 intended for industrial installations. It can be used for air, gases, water, chemicals, petrochemical products, etc., considering the chemical resistance of the valve material and sealing. It meets the requirements of the PED directive 2014/68/EU. The working pressure depends on the operating temperature. Body material: nickel-plated brass. Ball material: chrome-plated brass. Lever material: aluminum. Ball sealing: PTFE. Stem sealing: FKM + NBR. Connection: BSP parallel/GSP tapered. Operating temperature: from -20°C to +150°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsButterfly valve, between-flange, centric, WAFER type, intended for industrial gas installations, in pressure class MOP5. It can be opened and closed manually or by a pneumatic actuator. The handle positions the valve in 9 positions: "open," "closed," and intermediate positions. It meets the requirements of the PED directive 2014/68/EU. It has NF ROBGAZ certification for compliance with standards EN 13774 and EN 549. Body material: ductile iron EN-GJS-500-7, coated with epoxy 250 ÷ 300 µm. Disc material: stainless steel CF8M (up to DN100), ductile iron EN-GJS-500-7 (from DN125). Stem material: stainless steel AISI 420. Lever material: aluminum. Disc and stem sealing: NBR. Connection: flange PN10/PN16 for DN32 ÷ DN200, ASA150 for DN40 ÷ DN200. Operating temperature: from -20°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsElectricly adjustable NAMUR valve for controlling pneumatic actuators. Its connection allows for direct mounting of valves on the actuator body. Function 5/2 - five-way, two-position. Material: valve body - aluminum, slider - nickel-plated aluminum, sealing - NBR, end cover - Hostaform®. Operating pressure: 2.5 ÷ 10 bar. Operating temperature: -10°C to +60°C. Nominal flow: 1100 l/min (at inlet pressure 6 bar Δp = 1 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal check valve type 2280 intended for industrial installations, can be used for air, gases, water, chemicals, petrochemical products, etc., considering the chemical resistance of the valve material. The valve can be installed in any position, according to the flow direction indicated on the body. Maximum constant working pressure across the full temperature range. Body material: brass. Spring material: AISI 302 steel. Disc: POM. Disc sealing: NBR. Connection: BSP thread. Operating temperature: from -10°C to +90°C. Minimum opening pressure: 0.02 bar for 3/8" to 2.1/2"; 0.1 bar for 3" to 4".
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° angular swivel joint GG90 with ball bearing designed for hydraulic oil. Used in systems requiring a rotating connection to eliminate hose stress. The joint is intended for rotation at low torque. Not designed for operation at high rotational speeds. Material: galvanized steel. Sealing: NBR. Connection: GZ / GW BSP or NPT. Operating temperature: from -40°C to +106°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsRotary joint with three independent paths, internal BSP threads at the inlet, internal BSP threads at the outlet. Working pressure: 12 bar. Operating temperature: from -10°C to +80°C. Material: nickel-plated brass.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight plug connector with external NPT thread, series S, type PCC. Economic solution for connecting flexible pneumatic hoses with inch calibrated outer diameter. Easy and quick to use. Material: plastic. Working pressure: 10 bar. Vacuum: 0.99 bar. Operating temperature: from 0°C to +60°C. Sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsTwo-part long adapter for high-pressure cleaning devices with metric connection M22x1.5. With O-ring on both sides of the connection. Material: brass. Working pressure: up to 280 bar. Operating temperature: up to +160°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-pressure adaptor type A101 with external BSP threads (60° cone sealing). Material: AISI 316L steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery lightweight and flexible hose designed for the transport of air, dust, powders, fine wood shavings and chips, very light bulk materials, etc. Suitable for all types of industry, particularly commonly used for dust extraction and the removal of fine solid particles in the woodworking, furniture, ceramics, and plastics industries. Highly flexible and very axially compressible, also elastic at low temperatures. Good abrasion resistance, also resistant to microbes and hydrolysis. Non-toxic, free from halogen compounds and plasticizers. Resistant to oils and gasoline. The hose is marked with an arrow indicating the correct direction of medium flow. Wall thickness of the hose is measured between the spiral. Installation on couplings with bridge clamps (right-handed). Other diameters may be available upon special request. The hose is available in the following versions: ECO – standard version, ECO SE – version made of flame-retardant material (without fire classification), ECO AS – permanently antistatic version (ISO 8031: R <109 Ω, TRGS 727 (6.4.2.4): R <2.5 x 108 Ωm, directive 2014/34/EU (ATEX): can be used in specific explosion hazard zones after risk analysis), ECO SE AS – antistatic and flame-retardant version (available on special request). The ECO hose is produced in a manufacturing process compliant with sustainable development policies, using raw materials from the recycling of clean production waste, renewable energy, closed water cycles, and other innovations. Hose material: transparent polyester-polyurethane. Reinforcement: steel wire spiral. Wall thickness measured between the spiral: 0.4 mm. Operating temperature: from -40°C to +100°C (temporarily up to +125°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDistribution rail with connections O 4-6-8 mm for use in pneumatic systems, allowing the distribution of compressed air under pressure to several other branches. It has additional holes for securing it in the desired location of the installation. Working pressure: 12 bar. Operating temperature: from -10°C to +80°C. Material: anodized aluminum.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsExtended bent nozzle with a hole diameter of 2.3 mm for air guns, finished with a metric thread M12x1.25. Material: nickel-plated steel. Maximum pressure: 10 bar. Operating temperature: from -10°C to +50°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCAMLOCK B connector socket with external BSPT thread made according to the American military standard MIL-C-27487 (A-A-59326), commonly used as a transfer connection, particularly in the petrochemical industry. Working pressure: up to 7 bar, depending on the size of the connector. Material: glass fiber reinforced polypropylene. Levers: AISI 304 steel. Sealing: EPDM.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsReplacement seal kit for compact actuator ISO 21287, LINER series. Material: polyurethane. Diameter: 20, 25.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsScrewed hydraulic end, type S, with internal metric thread and nut, metal-metal sealing on a 60° cone (DKM). Designed for screwing in rubber and thermoplastic hoses using a screwed sleeve. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFoam lance assembled with a quick-connect plug DN 11.8, without nozzle. Connection: (inlet) plug DN 11.8 / (outlet) G 1/2" BSP. Available lengths: 22 cm, 50 cm, and 60 cm. Material: stainless steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDIN 3015 standard clamp type 100 (without top plate) designed for quick, easy, durable, and aesthetic mounting of pipes, hoses, and hoses in various industrial sectors, in ground and marine installations. Manufactured according to DIN 3015 standard. The clamp is mounted to the structure using welding of the clamp base (there is an option for bolting or mounting on a rail). The clamp typically features a profiled (grooved) surface for the pipe opening. For size group 0, there is one hexagon socket screw, and for size groups 1 to 6, there are two hexagon socket screws. In addition to standard metal components, extended plates, rails, and screws for mounting clamp sets can be ordered. Selection of components should be consulted with TUBES INTERNATIONAL®. Clamp material: rubber. Screw material: galvanized steel. Base material: carbon steel. Operating temperature: from -40°C to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-pressure water gun SG35 with lance MT8 for industrial applications. Suitable for hot and cold water. The lever mechanism does not require the operator to exert significant force, resulting in comfortable and pleasant operation. The outlet part of the lance is finished with an internal metric thread M22x1.5. The lance is made of stainless steel or galvanized material. The gun is also available with a swivel connection for installation. Housing material: high-strength plastic. Working pressure: up to 310 bar. Maximum pressure: 350 bar. Flow rate: 45 l/min. Operating temperature: up to +160°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDurable hand pliers designed for the installation of CAW-type or similar hose ties (with 1 or 2 "ears"). The jaw profile allows for easy and reliable front and side clamping.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDouble loop band with built-in Band-It® Ultra-Lok® fastener made of AISI 201 steel designed for the most demanding applications. The double loop increases the strength of the clamp. The smooth surface of the band and its proper installation on a non-corrugated hose create a tight fitting of the end, preventing leaks into the clamp. Installation using electric tools BD-UL9010 or BD-UL4000B. For mounting 1/2" clamps to the mounting device, a BD-M09387 adjustment washer should be used. Material: AISI 201 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSuction and discharge hose for demanding, versatile applications in the food industry. Excellent for the transfer of various types of food products such as: olive oil, wine, beer, fruit juices, milk, fats, and alcohols with a concentration of up to 96%. The inner layer is odorless and tasteless. It does not contain phthalates and bisphenol A, as well as polycyclic aromatic hydrocarbons (PAH Free), in accordance with ZEK 01.4-08 Cat.1. Tested for heavy metals. The outer layer is resistant to weather conditions and ozone. Thanks to the external corrugation, the hose is exceptionally flexible and elastic. The recommended method of installation with fittings is special EASY SHELL clamp shells, shaped to fit the hose's corrugation. Standards and requirements: Food industry, contact with food 1935/2004/EC and EC 2023/2006/EC (GMP). The inner layer complies with FDA 21 CFR 177.2600, BfR XXI cat. 2, D.M. 21/03/73, 3-A Sanitary Standard 18-03 class II. Inner layer: white, smooth synthetic rubber. Reinforcement: synthetic cord, steel spirals. Outer layer: blue synthetic rubber. Working pressure: 10 bar. Vacuum: 0.6 bar. Operating temperature: from -30°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAnaerobic sealant for pipes and flanges (with PTFE). Characterized by high viscosity and medium strength. Has DVGW certification - approved for gas and hot water installations. Has KTW certification - approved for drinking water installations. Removable using standard tools. Maximum thread size: M 80. Operating temperature: -60°C to +150°C. Packaging type "pen" with a capacity of: 50 ml.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible hose designed for solvents, paints, isocyanates, polyols, gases, air, water-based fluids. Standards: SAE 100R7, ISO 3949-R7. Inner layer: polyamide. Reinforcement: double polyester braid. Outer layer: micro-perforated polyurethane. Operating temperature: from -40°C to +100°C (for water and air up to +70°C).
