Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe inline shut-off valve with BSP internal thread is used to stop the flow of the medium in the installation. It is intended for air installations, and it can also be used with non-flammable and non-toxic gases (nitrogen, carbon dioxide, helium, argon, etc.). The closure of the shut-off valve is achieved by manually turning the knob, which moves the ball until it is completely sealed. The direction of flow is indicated by an arrow on the valve body. Maximum working pressure is constant across the full temperature range. Body material: brass. Ball material: stainless steel AISI 304. Stem sealing: NBR. Working pressure: from 25 bar to 40 bar, depending on the internal diameter DN. Operating temperature: from -10°C to +90°C.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPiston-type REG pressure reducing valve, characterized by resistance to harsh working conditions, intended for the NEW DEAL series. Possibility of wall mounting using holes in the body. Size: 1/4", 3/8", 1/2", 3/4", 1". Output pressure range: 0÷2, 0÷4, 0÷8, 0÷12 bar. Supply pressure: up to 18 bar. Operating temperature: up to +50°C. Connection: BSP female thread 1/4", 3/8", 1/2", 3/4", 1". Pressure gauge connection: BSP female thread 1/8" for valves up to 1/2" (above - BSP female thread 1/4"). Flow rate: 650 l/min - 1/4", 2500 l/min - 3/8", 1/2", 4500 l/min - 3/4", 1" (at an inlet pressure of 6 bar Δp = 1 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight JIC 37° fitting with external UNF thread (seal on 37° cone). Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-pressure adapter (connecting nut), type A106 with internal BSP threads (flat sealing). Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFilter with a piston-type pressure regulator from the NEW DEAL series, featuring a high degree of reliability, intended for compressed air systems or in close proximity to actuating devices. Wall mounting capability via holes in the housing. Size: 1/4", 3/8", 1/2". Output pressure range: 0 to 8, 0 to 12 bar. Supply pressure: up to 18 bar, for drain RA up to 10 bar. Operating temperature: up to +50°C. Connection: BSP female thread 1/4", 3/8", 1/2". Pressure gauge connection: BSP female thread 1/8". Condensate drain: manual / semi-automatic (RMSA), automatic (SAC). Flow rate: 700 l/min - 1/4", 2500 l/min - 3/8", 1/2" (at an inlet pressure of 6 bar Δp = 1 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCAMLOCK D connector socket with internal BSP or NPT thread made according to the American military standard MIL-C-27487 (A-A-59326), commonly used as a transfer connection, particularly in the petrochemical industry. Working pressure: up to 10 bar, depending on the size of the connector. Material: brass. Levers: AISI 304 steel. Sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsScrewed hydraulic end, type S, with internal BSP thread and nut, sealing cone 60° (DKR). Designed for screwing into rubber and thermoplastic hoses using a screwed sleeve. Material: AISI 316 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight water gun AKBO made of PA66 polyamide reinforced with fiberglass, stainless steel valve and lever, EPDM rubber cover, seals made of EPDM and Viton (FDA). It features an adjustable outlet nozzle, smooth flow regulation, and a trigger lock. Complies with FDA requirements. Used in the food industry. Working pressure: 12 bar. Maximum operating temperature: +50°C. Weight: approx. 0.48 kg. Flow rate: 48 l/min (12 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsTwo-output distribution rail for use in pneumatic systems, allowing for the distribution of compressed air under pressure to several other branches. It has additional holes for mounting in the desired location of the installation. Inlet - internal BSP threads, outlet - internal BSP threads. Working pressure: 12 bar. Operating temperature: from -10°C to +80°C. Material: anodized aluminum.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-quality aluminum compressed air gun designed for removing all contaminants from surfaces: liquids, fine chips, shavings, etc. Flow regulation by the degree of lever pressure. Made of forged aluminum, protected by anodizing, ensuring high strength, durability, and corrosion resistance. Can be used with water. Ideal for even the most challenging working conditions. The gun is equipped with a nozzle 120 mm in length, with an external connection thread M12x1.25. Other nozzles can be installed instead of the standard nozzle – see EWO gun accessories. Connection: EUROSTANDARD 7.2 plug. Material: aluminum (forging). Outer diameter of the nozzle (tube): 6 mm. Length of the nozzle: 120 mm. Maximum pressure: 10 bar. Operating pressure: 2 ÷ 8 bar. Operating temperature: from -10°C to +50°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSliding valve, type 4/2, electrically controlled with centering springs, intended for panel mounting. Used in hydraulic systems of industrial machines. Standardly supplied with O-rings and mounting screws. The coupling is equipped with a power status indicator LED. Material: cast iron (body), hardened steel (slider). Sealing: NBR. Maximum operating pressure: 315 bar (ports P, A, B), 160 bar (port T). Available for the following control voltages: 12 V DC, 24 V DC, 110 V AC, or 220 V AC. Operating temperature: from -20°C to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsNon-coated self-locking strap designed for easy and simple manual installation or using a tensioning and cutting tool (index: BD-KE9229). It has high resistance to fire, corrosion, UV radiation, and high and low temperatures. Material: AISI 304 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdjustable "L" plug tee with external tapered thread, type R38, intended for connecting hoses and other components in pneumatic systems. Easy and quick to use for multiple assemblies without loss of sealing on the mechanical and pneumatic sides. Material: nickel-plated brass. Working pressure: 16 bar. Working medium: vacuum, air. Operating temperature: from -20°C to +80°C. Sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsClassic, high-quality, self-tightening rubber hose (PUSH-ON). For low-pressure hydraulic systems, pneumatic systems, and as a universal industrial hose for air, water, oils, greases, light chemicals, and cleaning fluids. Widely used in the automotive industry (no silicone used in hose production). The outer layer is resistant to weather conditions, abrasion, and oil. Flame resistance complies with MSHA 2G-14C/14 standard. Non-conductive (R > 1 MΩ/inch at 1000 V DC). Safety factor 4:1. The hose is designed to work with self-tightening PUSH-ON type fittings. Available in colors: black (BK), blue (BL), green (G), gray (GY), red (R), and yellow (Y). Inner layer: black synthetic rubber Chemivic™ (NBR + vinyl). Reinforcement: synthetic braid. Outer layer: black, blue, green, gray, red, or yellow synthetic rubber. Working pressure: 20 bar. Operating temperature: from -40°C to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, highly flexible and bendable, chemically resistant and flame-retardant hose designed for use in air conditioning, ventilation, and heating systems. For the extraction and transmission of hot air, chemically aggressive vapors, exhaust gases, and gases in ventilation and heating systems. It has resistance to UV, ozone, and weather conditions. Used in vehicle equipment, engines, and the chemical industry. Characterized by high compressibility - up to 1:6, strong construction resistant to vibrations and stretching, and impact resistance due to the external spiral. Also available with a stainless steel spiral (from a diameter of 80 mm). Hose installation on couplings with bridge clamps (left-handed). Chemical resistance verification - chemical resistance table for CSM (preliminary selection), confirmation of resistance and application conditions - by Tubes International. Standard length: from 2 to 10 m. Hose material: externally black polyester fabric coated with CSM - Hypalon. Reinforcement: external spiral made of galvanized steel wire and sheet. Operating temperature: from -35°C to +175°C (temporarily up to +190°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, highly durable, universal high-quality flat hose used in the mining, oil, energy, and agriculture industries. Particularly used for water, sludge, wastewater, and fertilizers. Made from hydrolysis and microbe-resistant polyurethane - polyether. Reinforced with circumferentially woven polyester braid bonded and surrounded by polyurethane in the original hot thermoplastic polyurethane extrusion production process through braiding. The hose has high tensile strength, with minimal elongation under pressure (up to 2%) and no tendency to kink or twist. Due to its durability combined with ease of handling (unrolling, laying, storing), it is widely used in water systems (drainage of open-pit mines, water supply, drainage, and wastewater discharge) and beyond. Resistant to a wide range of chemicals, microbes, fungi, hydrolysis, weather conditions, UV, and ozone. Good abrasion resistance. Available on special order in lengths longer than 200 meters in diameters up to 6”. To confirm the resistance and application conditions of the hose, contact Tubes International. Maximum working pressure for temporary use established according to a safety factor of 2:1 approved by the manufacturer (only for water and safe, non-flammable liquids). For maximum longevity, it is not recommended to exceed 1/3 of the bursting pressure. Standard roll length: 200 m. Hose material: black polyurethane - polyether (PU). Working pressure: from 8 bar to 27 bar - depending on hose diameter and temperature. Operating temperature: from -50°C to +75°C (water).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible hose designed for solvents, paints, isocyanates, polyols, water-based fluids. Micro-perforated on request (for gases and air). Inner layer: polyamide. Reinforcement: double steel braid. Outer layer: polyurethane. Operating temperature: from -40°C to +100°C (for water and air up to +70°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible suction and discharge hose designed for the transfer of water, beer, wine, alcohols with a concentration of up to 20%, and other food products. Not recommended for milk and its derivatives, oils, and fatty food substances. Compliant with European regulations 1935/2004/EC and 10/2011/EU (simulant fluids A, B, and C). An antistatic wire is placed along the outer layer of the hose. The working pressure is 25% of the bursting pressure. Hose material: transparent PVC. Reinforcement: gray PVC spiral. Working pressure: from 2.4 bar to 5.6 bar, depending on the hose diameter. Operating temperature: from 0°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsTwo-part insert of clamp DIN 3015 type 201 made according to standard DIN 3015. Standardly features a profiled (grooved) surface for the pipe opening. Insert material: aluminum. Operating temperature: up to +350°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick-connect plug (adapter) for water NiTO CLICK 1/2" with NiTO system socket 1/2". NiTO CLICK quick-connects are water quick-connects made according to the profile of very popular plastic garden quick-connects and are compatible with them. Sealing is achieved using an o-ring placed externally on the plug. Manufactured in Denmark – 5-year warranty. They maintain the simplicity of commonly known plastic quick-connects and are characterized by strength and durability. Designed for water, water with cleaning agents for use in industry, services, horticulture, agriculture, etc. Material: chrome-plated brass (matte - satin). Working pressure: up to 25 bar. Operating temperature: from -30°C to +80°C. Sealing: NBR (not suitable for gasoline and oils).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBlind plug for QC4 and QC6 quick coupling socket compliant with Standard Instrumentation, with a tether. The blind plug is not designed to withstand pressure. It protects plugs and sockets from contamination and damage when the quick coupling is disconnected. Size: 1/4", 3/8". Material: AISI 316 steel. Operating temperature: from -26°C to +204°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThrottle check valve series RFL type U, regulating air flow value in only one direction. Used for controlling the working speed of actuators in pneumatic systems. Size: M5, 1/8″, 1/4″, 3/8″, 1/2″. Working pressure: up to 10 bar. Operating temperature: up to +70°C. Body material: aluminum. Housing material: brass.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdjustable 90° JIC 37° fitting with external thread and internal UNF thread, nut (seal on 37° cone). Material: AISI 316 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdaptor - high-pressure tee type A111 with internal thread 3 x BSP. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBilateral seal for quick coupling socket made of EPDM. Resistant to hot water. Operating temperature: up to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdjustable nozzle with variable flow designed for spraying and washing. Flow regulation is achieved by rotation. Connection: 3/4" BSP female thread. Working pressure: up to 25 bar. Material: nickel-plated brass.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFilter with pressure regulator (filter regulator) series SYNTESI®, without end connections, is a device consisting of a filter and a pressure reducing valve. It is built from the same components as the filter and regulator, thus it has the same technical characteristics. It reduces and purifies the air supplied by the compressor. Size: SY1, SY2. Output pressure range: 0÷8, 0÷12 bar. Supply pressure: up to 15 bar for SY1 and up to 13 bar for SY2. Operating temperature: up to +50°C. Connection: BSP 1/8" ÷ 3/8" for SY1 and BSP 3/8" ÷ 1" for SY2. Additional connection for pressure gauge or fittings: BSP 1/8" for SY1 and 1/4" for SY2. Condensate drain: manual / semi-automatic (RMSA), automatic (RA). Flow rate: 1300 l/min - 1/8", 2000 l/min - 1/4", 3000 l/min - 3/8" (SY1), 5800 l/min - 3/8" (SY2), 7200 l/min - 1/2", 7400 l/min - 3/4", 1" (at an inlet pressure of 6 bar Δp = 1 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCAMLOCK B connector socket with external BSPT thread made according to the American military standard MIL-C-27487 (A-A-59326), commonly used as a transfer connection, particularly in the petrochemical industry. Working pressure: up to 10 bar, depending on the size of the connector. Material: brass. Levers: AISI 304 steel. Sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPUSH-ON end fitting with internal metric thread, type YMW111, designed for self-clamping hose intended for this type of fitting. Mounted to the hose without the use of clamps or bands. Features a special profile of grooves tailored to the material and dimensions of the PUSH-ON hose and the structure of its braid, causing the hose to clamp onto the grooves of the fitting. The fitting should not be used with other hoses or clamped with bands or clamps, as this may damage the hose. Operating temperature: from -40°C to +80°C. Working pressure in accordance with the specifications of the PUSH-ON hose. Material: galvanized carbon steel, brass, AISI 316 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDIN 3015 standard clamp type 101 (with top plate) designed for quick, easy, durable, and aesthetic mounting of pipes, hoses, and hoses in various industrial sectors, in ground and marine installations. Manufactured according to DIN 3015 standard. The clamp is mounted to the structure using welding of the clamp base (there is an option for bolting or mounting on a rail). The clamp typically features a profiled (grooved) surface for the pipe opening. A clamp with a smooth surface for hoses and hoses is also available, marked with the letter H at the end of the index. For size group 0, there is one hexagon head screw, and for size groups 1 to 6, there are two hexagon head screws. In addition to standard metal components, extended plates, rails, and screws for mounting clamp sets can be ordered. The selection of components should be consulted with TUBES INTERNATIONAL®. Clamp material: rubber. Screw material: galvanized steel. Plate material: galvanized steel. Base material: carbon steel. Operating temperature: from -40°C to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-quality aluminum compressed air gun designed for removing all contaminants from surfaces: liquids, fine chips, shavings, etc. Flow regulation by lever pressure. Made of forged aluminum, protected by anodizing, ensuring high strength, durability, and corrosion resistance. Ideal for use even in harsh working conditions. The gun is equipped with a SAFETYSTAR nozzle, interchangeable, with an external connection thread M12x1.25, bent with a length of 110 mm made of nickel-plated steel. Perfect for blowing out hard-to-reach areas while improving working conditions by reducing noise levels to 80 dB. Other nozzles can be installed instead of the SAFETYSTAR nozzle – see EWO gun accessories. Depending on the connection, we distinguish a gun finished with a EUROSTANDARD 7.2 plug, a hose end with diameters of 6 mm, 9 mm, and 13 mm, or an internal thread of 1/4". Material: aluminum (forging). Maximum pressure: 10 bar. Operating pressure: 2 ÷ 8 bar. Operating temperature: from -10°C to +50°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsDouble ball valve (distributor) for compressed air and water. Body material: galvanized carbon steel. Ball material: chrome-plated brass. Ball sealing: PTFE. Inlet with internal thread, outlet with external thread or with cast iron quick-connect fittings with a pin spacing of 42 mm, with rubber sealing (NBR) or brass. Lever with end stop. Equipped with venting. Working pressure: 10 bar. Operating temperature: from -20°C to +100°C. Robust, maintenance-free design. Used in compressors and construction and industrial equipment.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSingle-acting plunger actuator with a screw-on gland, designed for hydraulic power systems. Depending on the application, load capacity (expressed in kG/100 bar) and stroke of the actuator must be selected. Repair kits for seals available upon request. Piston diameter: Ø 25 mm to Ø 60 mm. Working stroke: from 100 mm to 700 mm. Maximum working pressure: up to 210 bar. Medium: hydraulic oil. Material: carbon steel, cast iron (gland). Protective coating: chrome-plated plunger, the rest uncoated. Sealing: PU, POM, NBR. Operating temperature: from -30°C to +110°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsNon-coated self-locking strap designed for easy and simple manual installation or using a tensioning and cutting tool (index: BD-KE9229). It has high resistance to fire, corrosion, UV radiation, and high and low temperatures. Material: AISI 316 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsScrewed sleeve for thermoplastic hoses type OL5 or VE5. Use only with a screwed fitting from the same supplier (TI-S...). Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong suction and discharge hose designed for the transport of dry abrasive substances. The inner layer is smooth, antistatic, and highly resistant to abrasion (50±5 mm³ according to ISO 4649, formerly DIN 53516). Built-in copper wire that, when grounded (or connected to a grounded end), dissipates electric charges. The outer layer is resistant to weather conditions and ozone. The hose is intended for the transport of dry, highly abrasive substances: cement, sand, gravel, etc. Inner layer: black NR/SBR rubber. Reinforcement: synthetic cord, steel spiral. Outer layer: black EPDM rubber. Working pressure: 6 bar. Vacuum: from 0.8 bar to 0.9 bar - depending on the hose diameter. Operating temperature: -30°C to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible hose in a double version (two hoses with a welded outer layer) designed for hydraulic oil installations, gases, air, fuels, water-based fluids. Standards: DIN 24951, SAE 100R7, ISO 3949-R7. Outer layer: micro-perforated polyurethane. Working pressure: from 157 bar to 215 bar, depending on the hose diameter. Operating temperature: from -40°C to +93°C (for water and air up to +65°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-pressure, highly durable hose for compressed air transmission. Designed for use in harsh conditions such as construction sites, mines, etc., to power equipment with high compressed air consumption. Extremely robust and durable due to high-quality materials and a double-layer construction – double reinforcement with circumferentially woven high-strength polyester braid, completely covered and lined with thermoplastic polyurethane (PU). The hose has very good abrasion resistance, is puncture-resistant, tear-resistant, and oil-resistant. The hose does not elongate under pressure and is resistant to longitudinal loads. Flat in a resting state, which facilitates handling and storage. Available as ready-made hoses of 20 or 40 m in length, with factory-installed fittings. Use for high-pressure air should always be preceded by a risk analysis in case of accidental disconnection or rupture of the hose and potential application of safeguards. The maximum working pressure of the hose is established according to a safety factor of 4:1 approved by the manufacturer for air. Exceeding 1/3 of the specified breaking force is not recommended. Hose material: polyurethane (PU). Reinforcement: double polyester braid. Outer layer: orange polyurethane (PU). Working pressure: from 30 bar to 43.75 bar - depending on the hose diameter. Operating temperature: from -50°C to +110°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug cap for quick coupling QC4 and QC6 compliant with Standard Instrumentation, with a tether. Size: 1/4", 3/8". The cap is not designed for pressure transfer. Protects plugs and sockets from contamination and damage when the quick coupling is disconnected. Material: AISI 316 steel. Operating temperature: from -26°C to +204°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStainless steel hygienic valve with TRICLOVER connections, intended for the food, pharmaceutical, cosmetic, biotechnology, and chemical industries, manufactured according to the sanitary standard 3-A (63-03 and 78-01). Internal surface roughness Ra < 0.8 µm. The seal has PZH certification. Note: sizes from DN10 to DN20 are equipped with a plastic lever. Body material: AISI 304 steel. Seal: VMQ (silicone). Operating temperature: from -20°C to +100°C (short steam sterilization up to +120°C; cleaning with weak acid and base solutions up to +70°C). Tightness class: A according to DIN EN 12266-1. Working pressure: 10 bar.
