Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsFree of braid version TO (Tube Only) hose VISIFLON, made with high quality PTFE serrated spirally (clockwise) ensuring exceptional among hoses PTFE flexible, flexibility and resistance na vibration. hose VISIFLON TO can be used for conveying substances chemical, food, fuels, oils, paints, solvents, adhesives, dyes, detergents in conditions very low pressure. standard version VISIFLON TO made is with natural, semi-transparent PTFE, co allows visual control flow. version antistatic VISIFLON TO AS with PTFE with addition carbon (black) ensures discharge and dissipation charges electric for substances and conditions hazard electricity static. Material hose meets requirements FDA (21 CFR 177.1550 for VISIFLON TO, 21 CFR 178.3297 for VISIFLON TO AS). Flame-retardant (UL94 V-0) and with a high oxygen index (LOI). assembly hose requires straightening notches na length tail fitting, made na special equipment. fitting can be mounted then through crimping ferrules tube of steel stainless. value pressure working for hose PTFE VISIFLON without braid, applies only for temperatures 100°C, a in case vacuum for temperatures 80°C. above these temperatures occurs drop pressure working and vacuum. assuming use hose above these temperatures should to take into account and carry out appropriate test in conditions use. Material hose: spirally Serrated PTFE (teflon). temperature use: from -70°C to +100°C (up to +230°C). pressure working: from 2 bar to 4 bar - depending on diameter hose.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMedium wall thickness, flexible hose intended for discharge dusts, sawdust, chips, offcuts, light bulk materials etc. Specially designed according to the requirements of the wood and furniture industry, it can also be used in other industries. compliant with the standard DIN 26057 Type 2. Antistatic and flame-retardant, it ensures a high level of work safety. less pliable and compressible than SMARTFLEX® 0.4 and 0.6, za to smooth inside, flexible also in low temperatures. With very good abrasion resistance, also resistant to microbes and hydrolysis. Contains no halogen compounds or plasticisers. Resistant to oils and petrol. The optimal flow direction of the medium is marked with an arrow. The hose wall thickness is measured between the spiral. Assembly on connectors with bridge clamps (prawo-handed). Other diameters may be available on special order. Anti-electrostatic properties: permanently antistatic (in accordance with ISO 8031 resistance R 9 Ω, in accordance with the German technical regulations TRGS 727 (6.4.2.4) specific resistance R 8 Ωm, in accordance with directive 2014/34/EU (ATEX) it can be used in specified explosion-hazard zones - which should be preceded by a risk analysis). After effective two-sided earthing of the spiral, it can be treated as electrically conductive – in accordance with BGI 739-2 recommendations. Flame-retardant – in accordance with DIN 4102 class B1. Hose material: transparent polyether-polyurethane. Wall thickness measured between the spiral: 0.7 mm. Reinforcement: spiral with wire steel. Operating temperature: od -40°C up to +100°C (momentarily up to +125°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong hose suction - delivery intended for conveying substances food, requiring the use of rubber free of odour and taste. Contains no phthalates or bisphenol A. thanks to reinforcement spiral steel, has good resistance to vacuum. Suitable for milk and dairy products, as well as wine, beer, fruit juices. not recommended for oils and greasy substances food. Widely used in industry food. Layer outer hose resistant to abrasion and conditions atmospheric. Standards and requirements: Food industry, food contact: 1935/2004/EC and 2023/2006/EC (GMP). D.M. 21/03/73, FDA 21 CFR 177.2600, BfR XXI kat. 2. Inner layer: white rubber natural (NR). Reinforcement: cord synthetic, steel spiral. Outer layer: blue EPDM rubber. Working pressure: 6 bar. Operating temperature: from -25°C to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSemi-transparent, yellow, flexible hose designed specially for fuels and oils lubricating. resistant na swelling and hardening na result operation hydrocarbons, reduces significantly risk cracking and leakage. minimum extractability secures cleanliness fuels, a low factor penetration substances aromatic secures the operator and environment. resistant na ozone and radiation UV. flexibility hose facilitates its installations even in tight places. semi-transparent wall allows na monitoring flow. hose is resistant na most products petroleum-based and fuels (also with addition ethanol for 10%) and can be used for gasoline, kerosene, oil drive and heating, agents lubricating, coolants for cutting and na base glycol. commonly used and proven in thousands applications: small engines, automotive, vehicles recreational, mowers garden, saws, installations coolant and lubrication, equipment for cutting and polishing. Length of a full hose roll 15 m. pressure working determined relative to pressure bursting at factor safety 1:5. Material: PVC (special). Maximum operating temperature: +74°C. temperature brittleness: -37°C. Hardness: 57° Shore (A). Density: 1.26 g/cm 3. Note: The product is packaged in the Tubes International Clean Zone (CLEAN ROOM) in compliance with rigorous standards. Return of the product after opening the package is not possible.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose o excellent resistance temperature and strength on elevated pressure made of special, non-flammable polymer. has calibrated diameter external. Material is resistant to aging and action radiation UV, characterised good properties sliding co counteracts abrasion material. Material impermeable for gases, resistant to action greater concentrated bases and acids inorganic, organic, alcohols and solvents in elevated temperatures. has properties electrical-insulating. calibrated Diameter outer allows connection with plugs or couplings leading manufacturers. accuracy dimensional ensures constant strength on compression even for hoses with greater diameter makes, that is suitable for wider range practical applications. Hose material: polyfluoride vinylidene PVDF. Working pressure: from 16 bar to 80 bar (depending on the diameter hose). Operating temperature: od -50°C up to +140°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA very light, flexible suction-delivery hose intended for conveying chemical substances. made with thermoplastic vulcanizate TPV – material combining advantages processing polymers thermoplastic (PP – polypropylene) with properties vulcanized rubber (EPDM). good resistance chemical - close for rubber EPDM allows na use go for many substances, among others acids (hydrochloric, sulfuric), bases, salts, alcohols, glycols and ketones, concentrated detergents. not recommended for fuels, oils, solvents aromatic. resistant na conditions atmospheric, aging and abrasion (abrasion resistance compliant with ISO 4649:150 mm 3 ). low weight and small radius bending hose ensure ease operation, co can be advantage at transfer with tankers and container. Na special order Available version VACUPRESS SUPER CHEMI (diameter for 63 mm) with layer inner lined polyethylene (LLDPE) co increases resistance chemical hose and allows its use among others for concentrated acids hydrochloric and sulfuric, for acid nitric and for aggressive herbicides and insecticides. Inner layer: thermoplastic rubber TPV. Reinforcement: braid polyester, spiral steel galvanized. Outer layer: thermoplastic rubber TPV. pressure working for temperatures +20°C : od 7 up to 15 bar - depending on diameter hose. temperature use: from -25°C to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose HYPERLINE FX is optimal solution in use industrial, when required are large flow rates, resistance chemical and temperature, resistance na penetration. perfectly is suitable for conveying substances chemical, fuels, oils, paints, solvents, adhesives, dyes, gases and steam water, detergents, water and substances food. at temperature use above +130°C maximum pressure working given in table should reduced o 1% na each 1°C above tej temperatures. for example at temperature 170°C maximum pressure working for hose AF-FXAM-10 is: 70 bar – (170°C-160°C) x 1 = 70 bar – 40% = 42 bar. W case, when a hose PTFE flows substances, which is poor conductor and has potential properties electrification, charge electric will accumulated na internal surface PTFE and to avoid problem electricity static is used antistatic AS variant PTFE. antistatic teflon in version AS contains appropriate distributed in PTFE graphite and has resistance R 8 Ω (in accordance with the standard ISO 8031 anex A). Material hose: inside smooth, externally Serrated PTFE (teflon) - natural white and antistatic - black. Reinforcement: braid aramid. pressure working: from 35 bar to 77 bar - depending on diameter hose. temperature use: from -70°C to +180°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsColorless, semi-transparent, reinforced a braid flexible hose with rubber silicone vulcanized platinum. intended for higher pressures. used in industry pharmaceutical, cosmetic, food, biotechnology, sterile lines filling, systems treatment water, production vaccines, bioreactors. is characterized exceptionally smooth surface inner prevents deposition and adhesion contamination inside hose and growth bacteria. facilitates to total cleaning and sterilization hose. smooth Layer inner reduces also resistance flow through hose. low extractability, nie toxicity, nie hemolyticity and nie pyrogenicity ensures total cleanliness liquids we sensitive use. minimal level loads biological (bioburden). meets requirements hygienic American FDA 21 CFR 177.2600, 3-A and USP Class VI. possible sterilization steam (30 min, 1 bar, 121°C), cleaning CIP and SIP installations, oxide ethylene or radiation (for 5 Mrad). Length of a full hose roll 15 m (od diameter internal 31.8 mm – 7.5 m). pressure working determined relative to pressure bursting at factor safety 1:4. Material: silicone (platinum). Maximum operating temperature: up to +160°C. temperature brittleness: -80°C. Hardness: 70° Shore (A). Density: 1.18 g/cm³. Note: The product is packaged in the Tubes International Clean Zone (CLEAN ROOM) in compliance with rigorous standards. Return of the product after opening the package is not possible.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong, flexible, thick hose intended for discharge sawdust, chips, offcuts, bulk materials etc. Specially designed according to the requirements of the wood and furniture industry, it can also be used in other industries. compliant with the standard DIN 26057 Type 3. Antistatic and flame-retardant, it ensures a high level of work safety. thick wall and dense spiral reinforcing ensure high parameters pressure. very smooth inside, little compressible. flexible also in low temperatures. With very good abrasion resistance, also resistant to microbes and hydrolysis. Contains no halogen compounds or plasticisers. Resistant to oils and petrol. The optimal flow direction of the medium is marked with an arrow. The hose wall thickness is measured between the spiral. Assembly on connectors with bridge clamps (prawo-handed). Other diameters may be available on special order. Anti-electrostatic properties: permanently antistatic (in accordance with ISO 8031 resistance R 9 Ω, in accordance with the German technical regulations TRGS 727 (6.4.2.4) specific resistance R 8 Ωm, in accordance with directive 2014/34/EU (ATEX) it can be used in specified explosion-hazard zones - which should be preceded by a risk analysis). After effective two-sided earthing of the spiral, it can be treated as electrically conductive – in accordance with BGI 739-2 recommendations. Flame-retardant – in accordance with DIN 4102 class B1. Wall thickness measured between the spiral: 1.4 mm. Hose material: transparent polyether-polyurethane. Reinforcement: spiral with wire steel. Operating temperature: od -40°C up to +100°C (momentarily up to +125°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong hose suction - delivery with layer inner with resistant chemical polyethylene o ultra-high weight molecular (UPE, UHMWPE). The inner layer is resistant to most acids and bases and many other aggressive chemicals (in elevated, ale nie very high temperatures), co makes, that hose is wide used in industry chemical and petrochemical. Layer inner with UPE is also compliant with requirements for hoses food, free of phthalates and polycyclic carbon aromatic (PAH), is characterized also low a coefficient friction during flow and prevents deposition medium na walls. This significantly facilitates cleaning and allows use also in the cosmetic, pharmaceutical and food industry. Reinforcement cord synthetic and spiral steel, built-in cable copper for discharge charges electrostatic. Layer outer with resistant chemical rubber EPDM, resistant na abrasion, ozone and conditions atmospheric. compliant with requirements EN 12115:11 (type M, resistance between fitting the line R ≤ 100 Ω, guaranteed for lines o length for 40 m). standards and requirements : hoses chemical: EN 12115:2011. industry food, contact with food (Layer inner): 1935/2004/EC, 2023/2006/EC (GMP), 10/2011/EU (simulant fluids A, B, D2), FDA 21 CFR 177.1520, BfR III. Confirmation of resistance and application conditions requires contact with Tubes International, in particular for temperatures above 50°C. Inner layer: white cream polyethylene UPE. Reinforcement: synthetic cord, steel spiral. Outer layer: black rubber EPDM. pressure working: 16 bar. temperature use: from -40°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible, hose suction-delivery o internal layer with resistant to abrasion and oil polyurethane, with densely arranged steel spiral reinforcing for increasing pressure working and resistance to vacuum. intended for air, liquids, light chemicals, in systems pneumatic, hydraulic and for conveying substances solid. smooth surface inner reduces losses flow and ensures ease cleaning. transparent wall allows on visual control of the flow. Reinforcement dense spiral with wire steel ensures very good resistance to vacuum and kinking hose and small radius bends. W use general-industrial It can be used: for water, light chemicals and other liquids based on fat, oils and hydrocarbons (should take into account resistance chemical polyurethane) and for air, for vacuum conveying dusts, powders, granulates and other abrasive substances bulk (should then take into account abrasion resistance medium and any problem electricity static). It can be used in industry food (tam, where acceptable are requirements American FDA 21 CFR 177.2600 e, f) for liquid substances food for food hydrated („e”) and greasy („f”). Inner layer: transparent polyurethane. Reinforcement: steel spiral. Outer layer: transparent PVC. Working pressure at a temperature of 20°C: from 12 bar to 20 bar - depending on the diameter hose. Operating temperature: from -20°C to +90°C. As the working temperature rises, the hose's working pressure value decreases.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose Hyperline FX SS RC BLACK to light, flexible hose PTFE, has additional layer external made with black, antistatic and flame-retardant rubber EPDM, meeting (rubber) requirements for vehicles railway EN 45545. ensures to additional cover braid and hose against damage and easy cleaning hose. Ze regard na its properties recommended for applications in industry and vehicles mechanical. hose can be delivered without ends, jak and in the molds complete lines, gorowych for mounting. Material hose: inside smooth, externally Serrated PTFE (teflon). Reinforcement: single braid of steel AISI 304 with additional layer protective with rubber EPDM. pressure working: from 50 bar to 110 bar - depending on diameter hose. temperature use: from -40°C to +140°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible, pliable and almost smooth inside hose intended for extraction and conveying under slight overpressure dusts, powders, granulates, grain, flakes and similar light materials o properties abrasive. hose made is with polyether - polyurethane and has good resistance to abrasion, ozone, conditions atmospheric, hydrolysis and corrosion biological. is suitable for contact with food in the scope conveying bulk, dry materials food. complies with the European requirements 1935/2004/EC and 10/2011/EU (simulant E), 1895/2005/EC, 2023/2006/EC (GMP) and American FDA 21 CFR 177.2600 „d”. is suitable for time contact with food at conveying dry, bulk, free of fat on surface, substances food - on conditions defined in declaration conformity the manufacturer (Available in Tubes International). Reinforcement spiral with hard PVC ensures good resistance to crushing. Used in various industrial applications, in particular in industry agricultural – food, plastics, materials construction etc. versions: standard and antistatic - has copper cable anti-electrostatic embedded with outer side hose along spiral reinforcing. effective earthing cable ensures sufficient for many applications level discharge charges electrostatic. the given Wall thickness hose, measured is between spiral. Hose material: transparent polyether-polyurethane. Reinforcement: rigid-PVC spiral. Operating temperature: od -25°C up to +85°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsColorless, transparent, flexible hose completely free of plasticizers for applications chemical and food - demanding high resistance chemical, of regard na character substances (np. wine – alcohol, acids – sok orange) or used agents cleaning and disinfecting. resistant na acids, bases, salts, alcohols and ketones, o very low level absorption and adsorption. minimizes to risk changing properties, taste and smell liquid even at repeated use hose. glassy smoothed, free of pores surface inner prevents deposition and adhesion contamination inside hose and facilitates its cleaning. resistant na chemical agents cleaning and disinfectant. Not recommended for hydrocarbons. meets requirements hygienic and for contact with food: European 1935/2004/EC and 10/2011 EU (for conditions and substances acc. to certificate), American FDA 21 CFR 177.1520, NSF-51. possible sterilization oxide ethylene or radiation (for 2.5 Mrad). compliant with REACH – nie contains substances hazardous and banned. appropriate combustion used hoses nie causes release hazardous substances (np. hydrogen chloride). hose used both for substances food (np. dispensing wine) jak and chemical: installations detergents, dispensing paints printing, filling accumulators acid, analyzers chemical. Length of a full hose roll 15 m (for diameter internal 25.4 mm – 7.5 m). The given working pressure is determined relative to the bursting pressure at a safety factor of 1:5. Material: polyolefin. temperature use: from -75°C to +54°C. temperature brittleness: -75°C. Hardness: 75° Shore (A). Density: 0.90 g/cm³. Note: The product is packaged in the Tubes International Clean Zone (CLEAN ROOM) in compliance with rigorous standards. Return of the product after opening the package is not possible.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible hose intended for air, water and other media. is characterized flame retardancy and resistance on sparks welding, hot chips metal. resistant to hydrolysis, corrosion biological, radiation UV, solvents and detergents. withstands vacuum 0.9 bar. The calibrated outer diameter allows use with push-in connectors. Hose material: flame-retardant polyurethane PUR. Working pressure: 20 bar. Operating temperature: od -35°C up to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong, flexible, hose suction-delivery intended for pressure conveying water, beer, wine, alcohols with a concentration up to 20%, juices, drinks, other liquid substances food and light chemicals. not recommended for milk and its dairy products, oils and greasy substances food. Reinforcement spiral with galvanized wire steel, embedded in layer internal, PVC, ensures good resistance to vacuum and kinking hose. smooth Layer inner reduces losses flow and ensures ease cleaning. thanks to reinforcement a braid hose has high resistance pressure and small deformation under pressure. Standards and requirements: Food industry, food contact: compliant with the European requirements 1935/2004/EC and 10/2011/EU (simulant fluids A, B and C), 2023/2006/EC (GMP). Hose material: transparent PVC. Reinforcement: a polyester braid, steel spiral. Working pressure: from 10 bar to 20 bar, depending on the diameter hose. Vacuum: 0.9 bar. Operating temperature: -5°C up to +65°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery pliable and flexible, A universal hose suction-delivery intended for water, liquids and light chemicals. used for loading and unloading tankers, IBC containers and for conveying liquids in installations industrial, itp. retains high flexibility at sub-zero temperatures ambient. smooth inner wall facilitates maintaining hose in cleanliness and increases unloading efficiency by 20% compared with typical rubber hoses. Layer outer resistant to abrasion and conditions atmospheric. W industry food It can be used for conveying and transfer food hydrated, acidic, alcohols for 20% np. juices, drinks, beer, wine, (simulants A, B, C; up to +40°C and 2 h). Not recommended for milk and dairy products or oils and greasy food substances. hose VACUPRESS SUPERELASTIC complies with the European requirements 1978/142/EEC, 1935/2004/EC, 1895/2005/EC and 10/2011/EU (simulants A, B, C), 2023/2006/EC (GMP). Suitable for temporary contact with food when conveying food substances - under the conditions specified in the manufacturer's declaration of conformity (available at Tubes International). Inner layer: white PVC. Reinforcement: steel spiral, a polyester braid. Outer layer: black PVC. Working pressure at a temperature of 20°C: from 5 bar to 20 bar - depending on the diameter hose. Operating temperature: from -25°C to +60°C. As the working temperature rises, the hose's working pressure value decreases.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsColorless, transparent, strong and flexible hose made with polyester - polyurethane, free of plasticizers, exceptionally resistant na abrasion and tearing, is characterized flexibility even in low temperatures and withstands cyclic changing temperatures. hose manufactured is in strict tolerances dimensional batch for batch, co ensures safe, repeatable connection with fitting. resistant na oils, greases and fuels and range chemicals. strength na conditions atmospheric and intensive daily use. found use in many branches industry: installations fuel and lubricating, for liquids cooling in automotive, for air in pneumatics and automation industrial, for conveying products abrasive and viscous, sludge and powders and as A guard cables electric. length full roll hose 30 m. pressure working determined relative to pressure bursting at factor safety 1:5. Material: tygothane® - polyurethane-polyester (PU). temperature use: from -73°C to +79°C (momentarily up to +93°C). temperature brittleness: -73°C. Hardness: 82° Shore (A). Density: 1.20 g/cm 3. Note: The product is packaged in the Tubes International Clean Zone (CLEAN ROOM) in compliance with rigorous standards. Return of the product after opening the package is not possible.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMedium wall thickness, strong and flexible hose intended for discharge sawdust, chips, offcuts, light bulk materials etc. Specially designed according to the requirements of the wood and furniture industry, it can also be used in other industries. Antistatic and flame-retardant, it ensures a high level of work safety. less pliable and compressible than SMARTFLEX® 0.4, 0.6 and 0.7, za to smooth inside, flexible also in low temperatures. With very good abrasion resistance, also resistant to microbes and hydrolysis. Contains no halogen compounds or plasticisers. Resistant to oils and petrol. The optimal flow direction of the medium is marked with an arrow. The hose wall thickness is measured between the spiral. Assembly on connectors with bridge clamps (prawo-handed). Other diameters may be available on special order. Anti-electrostatic properties: permanently antistatic (in accordance with ISO 8031 resistance R 9 Ω, in accordance with the German technical regulations TRGS 727 (6.4.2.4) specific resistance R 8 Ωm, in accordance with directive 2014/34/EU (ATEX) it can be used in specified explosion-hazard zones - which should be preceded by a risk analysis). After effective two-sided earthing of the spiral, it can be treated as electrically conductive – in accordance with BGI 739-2 recommendations. Flame-retardant – in accordance with DIN 4102 class B1. Wall thickness measured between the spiral: 1.0 mm. Hose material: transparent polyether-polyurethane. Reinforcement: spiral with wire steel. Operating temperature: od -40°C up to +100°C (momentarily up to +125°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA light, flexible hose with a calibrated outer diameter, intended for pneumatic, hydraulic, oil, fuel, lubrication and chemical systems. Hose material: polyamide PA 6 (nylon). Working pressure: from 11 bar to 40 bar (depending on the diameter hose). Operating temperature: od -10°C up to +80°C. standard: DIN 73378.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery flexible, lighter od rubber, hose suction-delivery intended for conveying water, sewage, sludge and dry bulk materials. used for systems irrigation, loading and unloading tankers, in installations industrial, etc. retains high flexibility at sub-zero temperatures ambient. smooth inner and outer wall facilitates maintaining hose in cleanliness and increases flow capacity unloading o 20%. is resistant to conditions atmospheric and abrasion. hose Available also in straight, not bent in coil sections 3 for 6 m. Inner layer: black PVC. Reinforcement: a polyester braid, galvanised steel spiral. Outer layer: black PVC. Working pressure: from 5 bar to 16 bar - depending on the diameter hose and temperatures. Operating temperature: od -25°C up to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, very flexible hose suction-delivery intended for water, juices, drinks, beer, wine, alcohols with a concentration up to 20% and other products food. not recommended for milk and its dairy products, oils and greasy substances food. Reinforcement with a rigid-PVC spiral, impact-resistant, provides good resistance to vacuum and kinking of the hose. transparent wall allows on easy visual control of the flow. A smooth inner surface reduces flow losses and ensures ease of cleaning. surface outer lightly corrugated. W use not regarding direct contact with food (in industry, construction, agriculture) It can be used: 1) for light chemicals, water, sludge and sewage, other liquids (without fat, oils and hydrocarbons); 2) for air, vacuum conveying dusts, powders, granulates and other lightly abrasive substances bulk (not greasy). In that case the abrasiveness and the possible problem of static electricity must be taken into account. Standards and requirements: Food industry, food contact: compliant with the European requirements 1935/2004/EC and 10/2011/EU (simulant fluids A, B and C), 2023/2006/EC (GMP). Hose material: transparent PVC. Reinforcement: rigid-PVC spiral. Working pressure: from 2 bar to 7 bar, depending on the diameter hose. Operating temperature: from -10°C to +55°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA very light, flexible suction-delivery hose intended for conveying chemical substances. made with thermoplastic vulcanizate TPV – material combining advantages processing polymers thermoplastic (PP – polypropylene) with properties vulcanized rubber (EPDM). good resistance chemical - close for rubber EPDM allows na use go for many substances, among others acids (hydrochloric, sulfuric), bases, salts, alcohols, glycols and ketones, concentrated detergents. not recommended for fuels, oils, solvents aromatic. resistant na conditions atmospheric, aging and ozone. low weight and small radius bending hose ensure ease operation, co can be advantage at transfer with tankers and container. Note: all sizes hose have na branding marking approximate pressure working (WP 10 bar).Confirmation of resistance and application conditions requires contact with Tubes International. Inner layer: thermoplastic rubber TPV. Reinforcement: braid polyester, spiral steel. Outer layer: thermoplastic rubber TPV. pressure working for temperatures +23°C : od 12 up to 14 bar - depending on diameter hose. temperature use: from -30°C to +80°C (pressure working dependent od temperatures).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsColorless, transparent, soft and very flexible hose o exceptionally high service life in use in pumps peristaltic (LFL - „long flex life”). has high resistance fatigue and exceptional resistance na flaking („spallation” - crumbling particles material hose in result pressure rotor pump). one with best hoses TYGON® for pumps peristaltic - service life 1000 h use (at pressure check 0 bar). resistance na flaking particles eliminates need frequent replacement filter and minimizes risk contaminants substances. is suitable for liquids o high viscosity, sticky and liquids sensitive na shearing. wide used in industry food, cosmetic, pharmaceutical and chemical, in production and laboratories. hose free of is phthalates and BPA (bisphenol A). meets requirements hygienic and for contact with food: European 1935/2004/EC and 10/2011 EU (for conditions and substances acc. to certificate), American FDA, NSF, USP Class VI, international ISO 10993, Japanese #370/1959. possible sterilization steam or oxide ethylene. compliant with REACH and California Proposition 65 - nie contains substances hazardous and banned. length full roll hose 7.5 m (od diameter internal 19 mm - 3 m). pressure working determined relative to pressure bursting at factor safety 1:5. Material: PVC (special). Maximum operating temperature: up to +74°C. temperature brittleness: -46°C. Hardness: 56° Shore (A). Density: 1.17 g/cm³. Note: The product is packaged in the Tubes International Clean Zone (CLEAN ROOM) in compliance with rigorous standards. Return of the product after opening the package is not possible.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible, pliable and almost smooth inside hose with soft polyvinyl chloride (PVC) reinforced spiral with hard PVC (right-handed). intended for discharge dusts, smoke, fibres, extraction contaminants air etc. used also for discharge condensate in installations air conditioning and as A guard lines and cables. Assembly of the hose with clamps on suitable ends, pipe spigots etc.. The hose wall thickness is measured between the spiral. Hose material: grey, soft PVC. Reinforcement: rigid-PVC spiral. Operating temperature: od -15°C up to +60°C (podworking pressure depends on temperature).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible hose o calibrated diameter outer, intended specially for installations pneumatic automotive systems brake. Not contains plasticisers, not stiffens and is resistant to radiation UV. Available only in black. standard: ISO 7628 : 2010 (category 1). Hose material: thermoplastic elastomer (TPE) based on polyester. Working pressure: 10 bar. Operating temperature: od -40°C for + 100°C (for media based on water +65°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh quality hydrophobic hose delivery made in accordance with technology improvement platinum. free of odour and taste. smooth surface prevents adhesion contaminants. sterilization steam in temperature +135°C, alternatively argon, cobalt. compliant with requirements FDA, USP kl.VI, European Pharmacopoeia 3.1.9 and directives EC 1935/2004 and EC 2023/2006 (GMP). Safety factor 3:1. Inner layer: semi-transparent silicone. Reinforcement: a polyester braid. Outer layer: semi-transparent silicone. Operating temperature: od -60°C up to +200°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight and flexible hose suction-delivery intended for water, juices, drinks, beer, wine, alcohols with a concentration up to 20% and other products food. not recommended for milk and its dairy products, oils and greasy substances food. Reinforcement with a rigid-PVC spiral, impact-resistant, provides good resistance to vacuum and kinking of the hose. transparent wall allows on easy visual control of the flow. A smooth inner surface reduces flow losses and ensures ease of cleaning. surface outer lightly corrugated. W use not regarding direct contact with food (in industry, construction, agriculture) It can be used both for light chemicals, water, sludge and sewage, other liquids (without fat, oils and hydrocarbons), as and for air, vacuum conveying dusts, powders, granulates and other lightly abrasive substances bulk (not greasy). In that case the abrasiveness and the possible problem of static electricity must be taken into account. Available in version antistatic LUISIANA AS - has additional copper cable built-in in Material hose parallel for spiral, PVC, co po connection ends cable for installations and earthing ensures discharge charges electrostatic. version ta Available is on special order, example index version antistatic: e.g. ME-LUISIANA-AS-050. Standards and requirements: Food industry, food contact: compliant with the European requirements 1935/2004/EC and 10/2011/EU (simulant fluids A, B and C), 2023/2006/EC (GMP). Hose material: transparent yellowish PVC. Reinforcement: rigid-PVC spiral. Working pressure: from 2 bar to 8 bar, depending on the diameter hose. Operating temperature: from -5°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSuction-delivery hose latest generation specially designed according to high requirements industry processing beer. intended is for conveying high quality beer raw, beer pasteurised and beer organic. The inner layer is free of phthalates, plasticisers and components of animal origin, co eliminates risk contamination medium and growth bacteria. Layer outer resistant to abrasion, aging and conditions atmospheric. tested and approved for conveying beer through Technical University WEIHENSTEPHAN in Munich – not causes changes taste beer. standards and requirements : 1) general: EC 2002/95 (RoHS), EC 1907/2006 (REACH). 2) industry food, contact with food: 1935/2004/EC, 2023/2006/EC (GMP). Layer inner compliant with FDA 21 CFR 177.2600, D.M. 21/03/73, 3-A n. 18-03-Class II. Inner layer: white rubber bromobutyl (BIIR). Reinforcement: cord synthetic, steel spiral. Outer layer: red rubber CR. Working pressure: 10 bar. Operating temperature: -40°C up to +120°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery light, extremely pliable and flexible hose intended for discharge dust, dust, contaminants air, fumes, vapours etc. thanks to unique the structure with longitudinal and transverse reinforcement fibres synthetic and of spiral steel is characterized very small radius bends, resistance on kinking and exceptional resistance on stretching. durable and reliable, commonly used in systems vacuum cleaners industrial and domestic, in works construction for purification and drying and as hose cover. Not contains cadmium in accordance with BGR 132. discharge charges electric through earthing spiral steel. left-handed spiral reinforcing allows screwing on appropriate ends for vacuum cleaners with a left-hand thread (ends PVC for hose SUPERELASTIC or other appropriate). possible is also Assembly of the hose with clamps on suitable ends, pipe spigots etc.. Hose material: two layer soft PVC reinforced fiber. Reinforcement: steel spiral coated PVC. Operating temperature: od 0°C up to +85°C (working pressure depends on temperature).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, very flexible hose for air, gases, water and other media. used in systems in which available danger accumulation charges electric and in zones hazard explosion. compliant with the directive ATEX (2014/34/UE). resistance surface R 6 Ω. resistant to hydrolysis, microorganisms, abrasion and radiation UV. The calibrated outer diameter allows use with push-in connectors. recommended for applications in industry electronic, painting powder, zones hazard explosion, mining, conveyors and sorters parts. pressure working given at factor safety 2:1 relative to maximum pressure not causing damage hose. Hose material: antistatic polyurethane PUR. Working pressure: from 9 bar to 16 bar (depending on the diameter hose). Operating temperature: od -30°C up to +80°C. Vacuum: for 0.95 bar (at vacuum should increase radius bends o 20%).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe highest quality hose suction-delivery, intended for conveying aggressive substances chemical, solvents and concentrated chemicals, characterized by high strength thermal and mechanical and highest cleanliness layer internal. Layer inner with white polymer perfluoroalkoxy MFA (polymer fluorine o properties close for PTFE), mirror smooth (prevents deposition medium na walls and is easy in maintaining cleanliness), free of smell and taste, meeting high requirements hygienic (FDA, USP, European EU). layer intermediate with rubber synthetic, contain Reinforcement with cord synthetic, spiral with wire steel. outer Layer with rubber EPDM, antistatic (R 6 Ω ), resistant na abrasion, ozone and conditions atmospheric. hose is characterized excellent resistance chemical and cleanliness MFA, impermeability, resistance na temperature, oxidation and stresses mechanical. wide used in industry chemical of regard na total resistance na operation greater substances chemical. appropriate for conveying concentrated acids and alkalis (acid sulfuric, hydrochloric, phosphoric, nitric, lye sodium, potassium itp.). resistant na rigorous conditions cleaning method Cleaning-in-Place (CIP). Na special order version M according to EN 12115 with built-in two cables copper ensuring discharge charges electrical. standards and requirements: hoses chemical: EN 12115:2011 (type Ω). industry food, contact with food: 1935/2004/EC, 2023/2006/EC (GMP); Inner layer: 10/2011/EU, USP Class VI, FDA 21 CFR 177.1550 (e-and); ISO 10993. Nie contains plasticizers, phthalates ani substances origin animal. assembly: should use fitting with a spigot ("tail" for hose) smooth, not having sharp or high notches, which could po crimping cut or damage layer inner with MFA. The spigot diameter should be precisely matched to the hose diameter to ensure tightness. Assembly with clamping ferrules or shell clamps. Confirmation of resistance and application conditions requires contact with Tubes International. Inner layer: white polymer MFA. Reinforcement: synthetic cord, steel spiral. Outer layer: black rubber EPDM. pressure working: 16 bar. temperature use: from -50°C to +170°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsConnector hose SUPERFLEX RADIATOR intended for systems cooling engine in vehicles and engines type automotive (for water, liquids cooling na base glycol ethylene). version of reinforcement textile and a spiral steel securing against collapse bent hose. has „soft” fitting, free of spiral steel, enabling easy and tight installing na spigots using straps. serrated externally The design hose bends easily, replacing in many cases original formed connector and ensuring unobstructed solid flow even at strong bending. The design a connector corresponds standard SAE J20 R5 and is resistant na temperature and na fluids cooling used in automotive. no data regarding pressure working. Operating temperature: from -40°C to +125°C. Material a connector: black rubber EPDM. Reinforcement: textile braid + A spiral steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery light and flexible hose intended for discharge air, dust, dusts, fine sawdust and chips, very light bulk materials etc. Specially designed according to the requirements of the wood and furniture industry, it can also be used in other industries. compliant with the standard DIN 26057 Type 1. Antistatic and flame-retardant, it ensures a high level of work safety. very pliable and compressible, flexible also in low temperatures. With very good abrasion resistance, also resistant to microbes and hydrolysis. Contains no halogen compounds or plasticisers. Resistant to oils and petrol. The optimal flow direction of the medium is marked with an arrow. The hose wall thickness is measured between the spiral. Assembly on connectors with bridge clamps (prawo-handed). Other diameters may be available on special order. Anti-electrostatic properties: permanently antistatic (in accordance with ISO 8031 resistance R 9 Ω, in accordance with the German technical regulations TRGS 727 (6.4.2.4) specific resistance R 8 Ωm, in accordance with directive 2014/34/EU (ATEX) it can be used in specified explosion-hazard zones - which should be preceded by a risk analysis). After effective two-sided earthing of the spiral, it can be treated as electrically conductive – in accordance with BGI 739-2 recommendations. Flame-retardant – in accordance with DIN 4102 class B1. Hose material: transparent polyether-polyurethane. Reinforcement: spiral with wire steel. Wall thickness measured between the spiral: 0.4 mm. Operating temperature: od -40°C up to +100°C (momentarily up to +125°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, colorless, clear, flexible hose free of smell and taste, non-toxic, nie containing phthalates DEHP. designed specially for use in pumps peristaltic. used for dispensing and portioning cold and hot products food, for soaps and detergents, for paints and in laboratories. soft Material hose (60° Shore (A)) is very flexible and ensures very good service life over 500 hours use in pump peristaltic. hose is good alternative for used often hoses, PVC or silicone. is flexible even in temperature -40°C and withstands elevated temperature up to +121°C. has good resistance chemical na range substances chemical, np. acids and bases. Nie recommended for fats, high-percentage alcohols and hydrocarbons. resistant na ozone, oxygen and light solar, flame-retardant. is characterized low extractability (penetration components material for medium). meets requirements hygienic and for contact with food: European 10/2011 EU (for conditions and substances acc. to certificate), American FDA, NSF-51. possible sterilization steam, oxide ethylene or radiation. Length of a full hose roll 15 m. pressure working determined relative to pressure bursting at factor safety 1:5. Material: tygoprene® - thermoplastic elastomer styrene (TPE). Maximum operating temperature: up to +121°C. temperature brittleness: -66°C. Hardness: 60° Shore (A). Density: 0.9 g/cm³. Note: The product is packaged in the Tubes International Clean Zone (CLEAN ROOM) in compliance with rigorous standards. Return of the product after opening the package is not possible.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLow-pressure hose suction-delivery with transparent layer inner with resistant chemical PFA and thick layer external with transparent silicone. intended for various applications in industry pharmaceutical, cosmetic, food and chemical, where besides the highest cleanliness, asepsis and resistance chemical required is observation flow medium. Layer inner with polymer perfluoroalkoxy PFA (polymer fluorine o properties close for PTFE), transparent, mirror smooth, free of smell and taste, inert chemical, meeting high requirements hygienic (FDA, USP, European EU). Reinforcement spiral of steel stainless ensures good resistance na vacuum. thick Layer outer with silicone cross-linked compounds platinum o smooth surface features properties nie adhesion (hose nie „adhesives ”) and small a coefficient friction. can be easily purified at use weak detergent. The design hose combines advantages PFA with flexibility silicone and its resistance na temperature. hose has small minimal radius bends, is flexible and flexible in low and elevated temperatures, resistant na cyclic bending in accordance with ASTM D 2176 and na loads dynamic. standards and requirements hygienic: Inner layer: USP Class VI, 3-A Sanitary Standards 18-03 Class I, 10/2011/EU, FDA, ISO 10993-4, -10, -11, non-cytotoxic (ISO 10993 Part 5), ICH Q3D; Outer layer: USP Class VI, 3-A Sanitary Standards 18-03 Class I, D.M. 21/03/73, FDA, BfR, European Pharmacopoeia 3.1.9, ISO 10993-4, -10, -11, non-cytotoxic (ISO 10993 Part 5). hose compliant with 1935/2004/EC, 2023/2006/EC (GMP), made in Cleanroom ISO 14644-1 Class 8, nie contains phthalates, adipates, nitrosamines, substances origin animal, substances subject EC 1907/2006 (REACH). Confirmation of resistance and application conditions requires contact with Tubes International. For confirmation of resistance and conditions of use, please contact Tubes International. assembly: should use fitting with a spigot („tail” for hose) smooth, not having sharp or high notches, which could po crimping cut or damage layer inner with PFA. The spigot diameter should be precisely matched to the hose diameter to ensure tightness. assembly ferrules clamping or hose clamps (clamps). Inner layer: transparent polymer PFA. Reinforcement: spiral of steel stainless AISI 302. Outer layer: transparent silicone. pressure working: from 1 bar to 3 bar, depending on diameter hose. temperature use: from -30°C to +150°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA light, flexible hose with a calibrated outer diameter, intended for pneumatic, hydraulic, oil, fuel, lubrication and chemical systems. especially recommended for industrial or automotive installations hot liquids (fuels, oils, agents refrigerant) or air, not containing water. Available only in black. Hose material: modified polyamide PPA. Working pressure: from 10 bar to 44 bar (depending on the diameter and wall thickness wall hose). Operating temperature: od -40°C for + 150°C (for media based on water +70°C). standard: DIN 73378, ISO 7628.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible and smooth with small grooves inside hose with soft polyvinyl chloride (PVC), reinforced spiral with hard PVC (right-handed). intended for extraction contaminants air, smoke, discharge dusts, chips, fibres in industry textile etc. widely used in various use industrial. self-extinguishing and flame-retardant, in accordance with American class flammability UL 94 V-2. Assembly of the hose with clamps on suitable ends, pipe spigots etc.. Wall thickness measured between the spiral. Hose material: soft grey PVC. Reinforcement: rigid-PVC spiral. Operating temperature: od -10°C up to +60°C (podworking pressure depends on temperature).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, very flexible hose suction-delivery intended for conveying water, juices, drinks and other products food in temperature up to +40°C. The absence of phthalates in the hose material recommends it for conveying milk and dairy products and alcohols with a concentration up to 50% and a temperature up to +40°C. not recommended for oils and greasy substances food. Reinforcement spiral with wire steel, embedded in wall with soft PVC, ensures good resistance to vacuum and kinking hose. smooth wall inner reduces losses flow and ensures ease cleaning. transparent wall resistant to radiation UV allows on easy visual control of the flow. W use not regarding direct contact with food (in industry, construction, agriculture) It can be used: 1) for light chemicals, water, sludge and sewage, other liquids (without fat, oils and hydrocarbons); 2) for air, vacuum conveying dusts, powders, granulates and other lightly abrasive substances bulk (not greasy). In that case the abrasiveness and the possible problem of static electricity must be taken into account. as hose reinforced only spiral steel (without braid) is characterized a certain elongation under pressure, co should take into account in use, especially in temperatures above +40°C. Standards and requirements: Food industry, food contact: compliant with the European requirements 1935/2004/EC and 10/2011/EU (simulant fluids A, B, C and D1), 2023/2006/EC (GMP). Hose material: transparent PVC. Reinforcement: galvanised steel spiral. Working pressure: from 2 bar to 12 bar, depending on the diameter hose. Vacuum: 0.9 bar. Operating temperature: from -15°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsExceptionally pliable and flexible hose suction-delivery intended for conveying substances food, requiring the use of rubber free of odour and taste. Contains no phthalates or bisphenol A. Suitable for milk and dairy products, as well as wine, beer, fruit juices. not recommended for oils and greasy substances food. commonly used in road tankers for handling milk. Due to high flexibility It can be used for hose reels drum. Layer outer hose resistant to abrasion and conditions atmospheric. Standards and requirements: Food industry, food contact: 1935/2004/EC and 2023/2006/EC (GMP), D.M. 21/03/73, FDA 21 CFR 177.2600, BfR XXI kat. 2. Inner layer: white rubber natural (NR). Reinforcement: cord synthetic, steel spiral. Outer layer: blue EPDM rubber. Working pressure: 6 bar. Operating temperature: -25°C up to +80°C.
