90° hose fitting with a BSP female thread 1B series type EM, is widely used in laboratories, medicine, and the pharmaceutical, chemical and food industries. Assembly is carried out by pushing the hose onto the integrated connecting sleeve, and locking is achieved by means of a knurled nut that clamps the flexible hose onto the connecting sleeve. Repeated assembly is possible. It is intended for flexible plastic hoses (PVC, silicone) reinforced with a braid, of a specified wall thickness. The fitting withstands short pressure surges up to 30 bar at a temperature of +20°C. Other sizes and diameters of ends and connectors are available. Material: polypropylene, PVDF. Working pressure: 10 bar.

90° hose fitting with a BSP female thread type EM, is widely used in laboratories, medicine (e.g. dialysis devices), and the pharmaceutical, chemical and food industries. It has an integrated sleeve, which facilitates assembly, and the hose is locked by means of a clamping ring located inside the knurled nut. Thanks to its flexibility, the clamping ring can be used several times in the same joint. It is intended for flexible, smooth-walled, unreinforced hoses made of PVC, PA, PUR, PTFE, FKM, silicone and TYGON® hoses. Other sizes and diameters of ends and connectors are available. Material: polypropylene, PVDF. Working pressure: 10 bar.

90° hose fitting with a BSP male thread 1D series type EM, is widely used in laboratories, medicine, and the pharmaceutical, chemical and food industries. It is intended for flexible PFA hoses, whose ends must be thermally expanded for assembly (a so-called flared connection). This solution ensures no particle deposition, no bacterial build-up and elimination of medium leakage. Material: polypropylene, PVDF. Working pressure: 10 bar.

90° hose fitting with a BSP male thread, type EM, is widely used in laboratories, medicine, and the pharmaceutical, chemical and food industries. The design allows repeated assembly without the need for tools. The 1W+ series does not require smoothing the corrugations at the hose ends. It is intended for flexible, corrugated hoses with a smooth internal surface and unreinforced PTFE hoses. Material: PVDF. Working pressure: 4 bar.

Straight hose fitting with a BSP male thread, type EM, is widely used in laboratories, medicine, and the pharmaceutical, chemical and food industries. The design allows repeated assembly without the need for tools. The 1W+ series does not require smoothing the corrugations at the hose ends. It is intended for flexible, corrugated hoses with a smooth internal surface and unreinforced PTFE hoses. Material: polypropylene, PVDF. Working pressure: 4 bar.

Straight hose fitting with a BSP female thread type EM, is widely used in laboratories, medicine (e.g. dialysis devices), and the pharmaceutical, chemical and food industries. It has an integrated sleeve, and the hose is locked by means of a clamping ring located inside the knurled nut. Thanks to its flexibility, the clamping ring can be used several times in the same joint. It is intended for flexible, smooth-walled, unreinforced hoses made of PVC, PA, PUR, PTFE, FKM, silicone and TYGON® hoses. Other sizes and diameters of ends and connectors are available. Material: polypropylene, PVDF. Working pressure: 10 bar.

Straight hose fitting with a BSP male thread type EM, is widely used in laboratories, medicine (e.g. dialysis devices), and the pharmaceutical, chemical and food industries. It has an integrated sleeve, which facilitates assembly, and the hose is locked by means of a clamping ring located inside the knurled nut. Thanks to its flexibility, the clamping ring can be used several times in the same joint. It is intended for flexible, smooth-walled, unreinforced hoses made of PVC, PA, PUR, PTFE, FKM, silicone and TYGON® hoses. Other sizes and diameters of ends and connectors are available. Material: polypropylene, PVDF. Working pressure: 10 bar.

Straight hose fitting with a BSP male thread 1D series type EM, is widely used in laboratories, medicine, and the pharmaceutical, chemical and food industries. It is intended for flexible PFA hoses, whose ends must be thermally expanded for assembly (a so-called flared connection). This solution ensures no particle deposition, no bacterial build-up and elimination of medium leakage. Material: polypropylene, PVDF. Working pressure: 10 bar.

Straight TRI-CLAMP fitting with a BSP male thread 3C series type EM, is widely used in laboratories, medicine, and the pharmaceutical, chemical and food industries. The Tri-Clamp (Triclover) fitting is made in accordance with DIN 32676, ISO 2852 and BS 4825 standards and terminated with a BSP male thread. Supplied without a gasket, which should be ordered separately depending on the medium. Gaskets are available made of EPDM, FKM, Gylon® and PTFE. Material: polypropylene, PVDF. Working pressure: 6 bar.

Straight TRI-CLAMP fitting with a self-clamping spigot for a hose 3C series type EM, is widely used in laboratories, medicine, and the pharmaceutical, chemical and food industries. The Tri-Clamp (Triclover) fitting is made in accordance with DIN 32676, ISO 2852 and BS 4825 standards. Supplied without a gasket, which should be ordered separately depending on the medium. Gaskets are available made of EPDM, FKM, Gylon® and PTFE. The spigot, in turn, is intended for rigid hoses and tubes made of PTFE, FEP, PFA fluoropolymers, glass and metal tubes, polyamide (PA) tubes and tubes made of polyethylene (PE). The hose/tube is locked in the connector by means of a cutting ring and a nut. The connection is sealed by a PTFE ring. This solution eliminates any reduction of the hose cross-section, which as a result does not affect the flow of media. Material: polypropylene, PVDF. Working pressure: 6 bar.