Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsMultifunctional AKBO gun, equipped with a special quick connector at the outlet, with a guard in the form of a stainless steel arch. This gun can be used to: apply foam to cleaned surfaces, wash with water using an adjustable stream from the gun, spray, for example, a disinfectant (with the appropriate nozzle). Note: the gun's quick connectors and nozzles are not interchangeable with other systems! Material: brass. Trigger made of stainless steel. Guard made of blue EPDM rubber. Sealing: EPDM. Connection (inlet): GW 1/2" BSP. Maximum working pressure: 24 bar. Maximum operating temperature: +95°C.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMultiple rotary connection at the inlet with internal BSP thread, at the outlet with internal BSP threads. Working pressure: 12 bar. Operating temperature: from -10°C to +80°C. Material: nickel-plated brass.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSTOR coupling hanger for mounting on a smooth surface. Convenient accessory designed for easy storage of couplings by placing a coupling of a specific size DN onto the hanger and then twisting it to secure it against loss. Intended for sizes such as DN52, DN75, and DN110. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsTwo-part insert of DIN 3015 type 201 clamp made according to DIN 3015 standard. Standardly features a profiled (grooved) surface for the pipe opening. Insert material: rubber. Operating temperature: from -40°C to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsTwo-part insert for clamp DIN 3015 type 301 made in accordance with DIN 3015 standard. It typically features a profiled (grooved) surface for the pipe opening. Insert material: rubber. Operating temperature: from -40°C to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsEnd fitting for high-pressure cleaning devices, under nut M22x1.5. Material: carbon steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsReinforcing insert for thin-walled pipes DIN 2353. Material: brass.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsWater separator for a 28 mm diameter pipe tee for the SPEEDFIT system. Material: brass. Working pressure: 10 bar (+23°C), 7 bar (+70°C). Operating temperature: from -20°C to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe LAM L pressure indicator in the version with a threaded connection with an O-ring on one side and a plug connection on the other side (thread - hose) is used to signal (green or orange signal) the aeration of the system; when the system is vented, the sight glass indicator is "empty." Operating pressure: 2 ÷ 10 bar. Operating temperature: from -20°C to +60°C. Medium: filtered compressed air, oiled or non-oiled.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBC bracket for mini cylinder ISO 6432. Includes 1 pin and 2 retaining rings. Cylinder sizes: Ø8, Ø10, Ø12, Ø16, Ø20, Ø25. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSupport bracket model BC for cylindrical actuator series RNDC. Supplied with 2 screws. Actuator size: Ø32, Ø40, Ø50. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMounting bracket for wall (pair), intended for the BIT system 1/8" and 1/4".
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsElectric plug 15 mm. Color: black or transparent.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° quick coupling plug for hose with nut and valve is intended for gas detection, medical devices, chemical analyzers, inkjet printing, as equipment for optical devices, etc. The effectiveness of the connection is indicated by an audible click. Length L [mm] - total length. Material: acetal (NBR o-ring). Working pressure: up to 8.3 bar. Operating temperature: from -40°C to +82°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMedium-sized 90° quick coupling plug without valve with hose end intended for washing installations, deionized water filtration, industrial machines, leak detection, etc. Length L [mm] - total length. Material: polypropylene. Sealing: EPDM o-ring. Working pressure: up to 8.3 bar. Operating temperature: from 0°C to +71°C.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° quick-connect plug with valve for hose is intended for gas detection, medical devices, chemical analyzers, inkjet printing, as equipment for optical devices, etc. The effectiveness of the connection is indicated by an audible click. Length L [mm] - total length. Material: acetal (NBR o-ring). Working pressure: up to 8.3 bar. Operating temperature: from -40°C to +82°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMedium-sized 90° quick-connect plug with a hose nut, intended for washing installations, deionized water filtration, industrial machines, leak detection, etc. Length L [mm] - total length. Material: acetal. Sealing: NBR o-ring. Working pressure: up to 8.3 bar. Operating temperature: from -40°C to +82°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMedium-sized 90° quick-connect plug with a hose nut, intended for washing installations, deionized water filtration, industrial machines, leak detection, etc. Length L [mm] - total length. Material: polypropylene. Sealing: EPDM o-ring. Working pressure: up to 8.3 bar. Operating temperature: from 0°C to +71°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDN 6 quick coupling plug with hose end, without valve, widely used in the industry for cooling injection molds and casting parts made of plastics, aluminum, brass, and zinc alloys. Can be used for water in cleaning machines, hot oil, and steam. Flow diameter: 6 mm. Working pressure: 25 bar. Material: brass (plug body).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDN 6 quick coupling plug with tube, without thread, for locking ring. Widely used in the industry for cooling injection molds and casting parts made of plastics, aluminum, brass, and zinc alloys. Can be used for water in cleaning machines, hot oil, and steam. Flow diameter: 6 mm. Working pressure: 25 bar. Material: brass.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick-connect socket with hose end, without valve, intended for inkjet printing installations, blood, cooling fluids, gas chromatography, etc. The connection involves twisting two parts of the coupling relative to each other. Their design allows for easy one-handed operation, and the characteristic click ensures a secure connection. Versions with a valve and in black color are also available. Nominal size of the quick coupling: DN 1.2 mm. Length L [mm] - total length. Material: acetal. Sealing: NBR o-ring. Working pressure: up to 6.9 bar. Operating temperature: from -40°C to +82°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMedium-sized quick coupling plug with hose end intended for washing installations, deionized water filtration, industrial machines, leak detection, etc. Length L [mm] - total length. Material: acetal. Sealing: NBR o-ring. Working pressure: up to 8.3 bar. Operating temperature: from -40°C to +82°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe quick-connect flange plug with a valve for hoses is intended for gas detection, medical devices, chemical analyzers, inkjet printing, as equipment for optical devices, etc. The effectiveness of the connection is indicated by an audible click. Length L [mm] - total length. Material: acetal (NBR o-ring). Working pressure: up to 8.3 bar. Operating temperature: from -40°C to +82°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick coupling plug with free flow and Eurostandard DN5 (MINI) valve socket, series 21KA with external thread lBSP. Widely used in the industry where compact dimensions are required along with high flow efficiency and low pressure drop. One-handed operation. Flow rate: 560 l/min (Pe = 6 bar, Δp=0.5 bar - air), 8 l/min (Δp=1 bar Kv=0.48 - water). Working pressure: 35 bar. Material: AISI 316Ti steel (threaded part of the socket, coupling body, sleeve, valve, spring, and ring), AISI 420 steel (balls). Sealing: viton. Operating temperature: from -15°C to +200°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-pressure water quick coupling NiTO plug with internal metric thread and sealing sleeve (NT-65632B9 - without sealing sleeve). Material: hardened steel. Working pressure: 180 bar. Operating temperature: +150°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsNiTO quick coupling plug for high-pressure water with external metric thread. Material: hardened steel. Working pressure: 180 bar. Operating temperature: +150°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsNitto Kohki ROTARY PLUG without valve with external thread. One-way shut-off quick coupling designed for connecting pneumatic devices and tools. It features a rotating connection part of the plug with a thread allowing for 360° rotation. A 45° connection with the tool eliminates resistance transmitted by the connected hose. Plugs can be connected with Nitto Kohki HI CUPLA series sockets. Operating temperature: from -20°C to +80°C. Working pressure: 15 bar.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsNitto Kohki TWIST PLUG coupling without valve with external thread. One-way shut-off quick coupling designed for connecting pneumatic devices and tools. It features a flexible connection between the quick coupling plug and the thread, allowing free angle adjustment (up to a maximum of 70°), which enables comfortable operation even in confined spaces or overhead. couplings can be combined with Nitto Kohki HI CUPLA series sockets. Operating temperature: from -20°C to +60°C. Working pressure: 10 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMiniature quick-connect measurement plug DN1.2, with plastic or metal cap and external thread, manufactured in Sweden, designed for measuring static, dynamic pressure, and vacuum in hydraulic systems. The plug is equipped with a valve ensuring leak-free connection, disconnection, and sealing, even at 90% vacuum. Measurement plugs made of hardened steel, durable and maintenance-free. Connections with external thread sealed using an O-ring recessed in the front surface (type A) or an O-ring at the front surface (type B). Material: galvanized steel. Sealing: NBR. Working pressure: 600 bar (for plugs TA-M-120: 400 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMeasurement plug equipped with a PVC cap, intended for connection with TEMA 100 socket, additionally connected with thermoplastic hose. Material: galvanized steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSwivel plug with external or internal BSP thread profile compliant with the popular EURO DN7.2 standard. The ability to rotate 360° effectively prevents the connected hose from twisting and allows for free operation with the connected pneumatic tool. An additional positioning option (maximum deflection of 30°) also enables installation in hard-to-reach places without the risk of kinking the hose. German quality and construction from nickel-plated steel ensure a longer lifespan than standard brass plugs. These couplings are suitable for use with impact tools (pneumatic wrenches, pneumatic nailers, etc.). Interchangeable with all Eurostandard DN7.2 ÷ 7.8 from other manufacturers. Application: pneumatics (air, nitrogen, other non-flammable gases). Working pressure: 10 bar - max. 25 bar (safety factor: 1.5). Flow rate: 1090 l/min, Pe = 6 bar, Δp = 1 bar. Operating temperature: from -20°C to +80°C. Material: nickel-plated steel.
Select options This product has multiple variants. The options may be chosen on the product page / Details90° quick coupling plug DYROS series 30 with external thread without valve. Available with metric or BSP thread. Designed for cooling liquids for molds in plastic processing, compressed air installations, gas cylinder applications, and other technical fields. Material: brass. Working pressure: 15 bar.- Select options This product has multiple variants. The options may be chosen on the product page / Details90° quick coupling plug DYROS series 40 with external BSP thread without valve. Designed for cooling liquids in plastic processing, compressed air installations, gas cylinder applications, and other technical fields. Material: brass. Working pressure: 15 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° quick coupling plug DYROS series 80 with external thread without valve. Available with metric or BSP thread. Designed for cooling liquids in plastic processing, compressed air installations, gas cylinders, and other technical fields. Material: brass. Working pressure: 15 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° quick coupling plug DYROS series 90 with external thread without valve. Available with metric or BSP thread. Designed for cooling liquids in plastic processing, compressed air installations, gas cylinders, and other technical fields. Material: brass. Working pressure: 15 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° quick coupling plug EATON series J70000 with hose end without valve. Designed for cooling and thermostating injection molds, for water and oil. Material: nickel-plated brass. Sealing: viton. Working pressure: 15 bar. Operating temperature: -15°C to +200°C (when using identifying rings for sockets, operating temperature up to +110°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDYROS 90° quick coupling plug series 30 with a ring-locking end without a valve. Designed for cooling liquids in plastic processing, compressed air installations, gas cylinders, and other technical fields. Material: brass. Working pressure: 15 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDYROS 90° quick coupling plug series 40 with a ring-locking end without a valve. Designed for cooling liquids in plastic processing, compressed air installations, gas cylinder applications, and other technical fields. Material: brass. Working pressure: 15 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° quick coupling plug DYROS series 6 with a ring locking end without a valve. Designed for cooling liquids for molds in plastic processing, compressed air installations, gas cylinders, and other technical fields. Material: brass. Working pressure: 15 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDYROS quick coupling plug 90° series 90 with a ring-locking end without a valve. Designed for cooling liquids in plastic processing, compressed air installations, gas cylinder applications, and other technical fields. Material: brass. Working pressure: 15 bar.
