Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible and lightweight polyamide hose, intended for pneumatic, oil, fuel, and hydraulic installations, resistant to chemicals and lubricants. It has a calibrated outer diameter, allowing for the use of plug couplings, which significantly shortens and facilitates its installation. Compliant with DIN 73378 standard. Available in colors: yellow, orange, red, blue, green, natural, and black. Hose material: polyamide PA 12 (nylon). Working pressure: from 16 bar to 49 bar, depending on the diameter and wall thickness of the hose. Operating temperature: from -55°C to +100°C (for water-based media +70°C).- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible welding hose for oxygen made according to ISO 3821 standards. It is characterized by resistance to kinks and weather conditions. Not recommended for gases produced from fuels, oils, and LPG gas. Inner layer: black SBR/NR rubber. Reinforcement: synthetic braid. Outer layer: blue smooth SBR/NR rubber. Working pressure: 20 bar. Operating temperature: from -20°C to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal, lightweight, highly flexible suction and discharge hose designed for general industrial applications for water and light chemicals, other liquids (excluding fats, oils, and hydrocarbons). It can also be used for air, vacuum transfer of dust and powders – abrasion resistance and potential static electricity issues should be considered. It can be used (at temperatures up to +40°C) for liquid and semi-liquid food products such as juices, beverages, beer, wine, alcohols up to 50% concentration, milk, and dairy products. It is not recommended for oils and fatty food substances. The reinforcement with a steel wire spiral embedded in a soft PVC wall provides good resistance to vacuum and hose collapse. The transparent wall allows for easy visual monitoring of flow. As a hose reinforced only with a steel spiral (without a braid), it exhibits some elongation under pressure, which should be taken into account in applications, especially at elevated temperatures. The METALFLEX PVC hose complies with European regulations 1935/2004/EC, 10/2011/EU (simulants A, B, C, and D1), 2023/2006/EC (GMP), and FDA CFR 21 175.300 and 175.1210. It is suitable for temporary contact with food during the transfer of food substances - under the conditions specified in the manufacturer's declaration of conformity (available from Tubes International). Hose material: transparent, soft PVC. Reinforcement: galvanized steel spiral. Working pressure for a temperature of 20°C: from 1 bar to 9 bar - depending on the hose diameter. As the operating temperature increases, the working pressure value of the hose decreases. Operating temperature: from -10°C to +65°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe version of the HYPERLINE hose without a braid (Tube Only) is externally spiral corrugated (right-handed) and internally smooth. The hose combines the advantages of a flexible corrugated hose and a smooth-walled hose with undisturbed flow. The standard version is made of natural, semi-transparent PTFE, allowing for visual flow monitoring. The antistatic AS version made of carbon-filled Teflon (black) ensures the dissipation and dispersion of electric charges for substances and conditions at risk of static electricity. The hose material meets FDA requirements (21 CFR 177.1550 for the standard hose, 21 CFR 178.3297 for the antistatic version). It is flame-retardant (UL94 V-0) and has a high oxygen index (LOI). It can be used for the transfer of chemicals, foodstuffs, fuels, oils, paints, solvents, adhesives, dyes, and detergents under very low pressure conditions. Ends can be fitted with crimped stainless steel tube sleeves. The relationship between working pressure and temperature for the HYPERLINE FX Teflon hose without a braid applies only up to a temperature of 150°C. Above this temperature, there is a decrease in working pressure and vacuum. If the hose is to be used above these temperatures, this must be taken into account, and appropriate tests should be conducted under operating conditions. Available versions: standard and antistatic. Hose material: PTFE (Teflon). Operating temperature: from -70°C to +150°C (up to +260°C - working pressure of the hose dependent on temperature).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe HYPERLINE SB (HYDRAFLON) hose features an inner layer made of high-quality seamless PTFE, ensuring minimal porosity, maximum flexibility, and resistance to vibrations. The braid is made from heat-treated AISI 304 stainless steel wire with a tensile strength of 1700 MPa. It is used for the transmission of chemicals, food substances, fuels, oils, paints, solvents, adhesives, dyes, detergents, steam, etc. - as well as for classic high-pressure hydraulic oil installations. The HYPERLINE SB hose is a version of the SMOOTHBORE hose with a medium wall thickness and an internal diameter adapted to standard hydraulic fittings; installation is done using standard straight clamp jaws. In cases where static electricity hazards are identified (risk of charge generation and accumulation), HYPERLINE SB hoses in the antistatic AS version should be used. The antistatic Teflon in the AS version is black (contains appropriately dispersed graphite in PTFE) and has a resistance R <10^8 Ω (according to ISO 8031 annex A). This ensures the dissipation and dispersion of electric charges. At operating temperatures above +130°C, the maximum working pressure should be reduced by 0.75% for each 1°C increase in temperature. The value "Wall thickness [mm]" provided in the Technical Data refers to the PTFE layer. Hose material: smooth PTFE (Teflon). Reinforcement: single braid of AISI 304 steel. Working pressure: from 80 bar to 350 bar - depending on the hose diameter. Operating temperature: from -70°C to +260°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose for cleaning and washing installations and machines in the food industry with steam and hot water. The inner layer meets FDA 21 CFR 177.2600 and BfR XXI category 2 requirements. The outer layer is resistant to vegetable and animal fats. High-quality hose, commonly used for cleaning and washing with hot water or steam in the food industry (e.g., dairies, meat industry). Note: the hose should not be used simultaneously for water and steam. For steam, use special screw-on fittings designed for steam. To extend the lifespan, the hose should be emptied of steam after use to avoid condensation buildup. Standard roll length: 60 m (or 120 m - contact Tubes International). Inner layer: white butyl rubber. Reinforcement: synthetic cord. Outer layer: blue NBR/PVC rubber. Working pressure: 6 bar (10 bar - for water). Safety factor: 10:1 (3:1 - for water). Operating temperature: from -30°C to +165°C (from -30°C to +95°C - for water).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose intended for hot water pressure washing equipment. Inner layer resistant to detergents, outer layer resistant to abrasion, oils, ozone, and weather conditions. Standards: ISO 1307. Inner layer: black synthetic rubber. Reinforcement: single steel braid or double steel braid. Outer layer: black or blue synthetic rubber (micro-perforated). Working pressure: 250 bar or 400 bar, depending on the type of hose. Operating temperature: from -40°C to +120°C or from -40°C to +150°C, depending on the type of hose.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible hose for propane-butane and natural gas. Meets the requirements of ISO 3821 standard. Inner layer: black NBR rubber. Reinforcement: two textile braids. Outer layer: orange EPDM/SBR rubber. Working pressure: 20 bar. Operating temperature: from -30°C to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-quality large-diameter refrigerant hose designed for automotive (especially trucks and buses) and industrial refrigeration and air conditioning systems operating on R 134a and R404a refrigerants, as well as mineral and synthetic oils PAG and POE. The outer layer is resistant to oil, abrasion, high temperatures, and weather conditions. Standards: SAE J2064 type B (dimensions SAE 100R5). Installation: use special screwed or clamped fittings. Inner layer: black IIR rubber. Reinforcement: steel braid. Outer layer: black CSM rubber, micro-perforated. Working pressure: 35 bar. Operating temperature: from -40°C to +125°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible pressure hose used for washing with cold and hot water and for the transfer of light chemicals, detergents, and disinfectants. Suitable for use in the food industry. Compliant with European requirements for food substances according to regulation 1935/2004 EC and directive 2007/19/EC (simulated fluids A, B, C). Hydraulic type fittings (TI-Z...) should be used, properly secured with sleeves, or fittings attached using two clamps, which should be tightened after the first use at higher temperatures. Fittings and sleeves should be secured after preheating the hose in water at +60°C for 30 seconds. Inner layer: white, smooth PVC. Reinforcement: synthetic cord. Outer layer: blue, smooth PVC. Working pressure: 33 bar. Operating temperature: from -15°C to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight and flexible hose designed for the transport of air, dust, powders, wood shavings, fine chips, lightweight bulk materials, etc. Specifically designed according to the requirements of the woodworking and furniture industries, it can also be used in other industrial sectors. Antistatic and flame-retardant, it ensures high work safety. Flexible and elastic, even at low temperatures. Less compressible than the SMARTFLEX® 0.4 hose, but smoother on the inside. With very good abrasion resistance, also resistant to microbes and hydrolysis. Free from halogen compounds and plasticizers. Resistant to oils and gasoline. The optimal direction of medium flow is marked with an arrow. The wall thickness of the hose is measured between the spiral. Installation on couplings with bridge clamps (right-handed). Other diameters may be available upon special request. Antistatic properties: permanently antistatic (according to ISO 8031 resistance R <109 Ω, according to German technical regulations TRGS 727 (6.4.2.4) specific resistance R < 2.5 x 108 Ω, according to directive 2014/34/EU (ATEX) can be used in specific explosion hazard zones - which must be preceded by a risk analysis). After effective double grounding of the spiral, it can be treated as electrically conductive – in accordance with the recommendations of BGI 739-2. Flame-retardant – according to DIN 4102 class B1. Hose material: transparent polyester-polyurethane. Wall thickness measured between the spiral: 0.6 mm. Reinforcement: spiral made of steel wire. Operating temperature: from -40°C to +100°C (temporarily up to +125°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-quality, flexible hose in cream color, specifically designed for the pharmaceutical industry, biotechnology, and laboratories. It has high fatigue resistance, exceptionally long service life in peristaltic pumps, and good resistance to spallation (the chipping of micro-particles from the hose material due to rotor pressure). It also features very low permeability to gaseous media, low absorption levels of transmitted products, and good resistance to acids, bases, and oxidation. Ideal for use in diagnostic processes, sampling and culturing of in vitro cell cultures, vaccine production, bioreactors, sterile filling lines, fermentation processes, extraction, and purification. The opaque wall of the hose protects sensitive products from UV radiation. The hose complies with USP Class VI requirements and is completely non-cytotoxic, non-hemolytic, and non-pyrogenic. Compliant with ISO 10993 for contact with blood, bodily fluids, and tissues for up to 30 days. Meets NSF-51 requirements for food contact. Multiple sterilization by steam in autoclaves is possible (30 min, 1 bar, 121°C), CIP and SIP cleaning of installations, ethylene oxide, or radiation (gamma Cobalt 60 up to 5 Mrad). Flame resistant (UL 94-HB). Full hose roll length is 7.5 m. Working pressure specified relative to burst pressure with a safety factor of 1:5. Material: thermoplastic elastomer (TPE). Operating temperature: from -51°C to +135°C. Brittleness temperature: -75°C. Hardness: 64° Shore (A). Density: 0.98 g/cm³. Note: Product packaged in the Clean Room of Tubes International with strict standards maintained. Return of the product after opening the packaging is not possible.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPressure hose, very flexible, resistant to aging, ozone, weather conditions, and abrasion. Designed for air, water, and light chemicals: non-oxidizing, diluted acids (e.g., hydrochloric and sulfuric), diluted bases, salt solutions, alcohols, acetone, ketones, glycol-based coolants. Not suitable for oils, fuels, aromatic hydrocarbons. Can be used for various water-soluble paints and those based on ketones and esters. Not suitable for cellulose paints, chlorinated rubber, and others containing aromatic solvents (e.g., toluene, xylene) or gasoline. Inner and outer layer antistatic R<106 Ω according to EN ISO 8031:2009. Inner layer: black EPDM rubber. Reinforcement: single or double (DN 32÷38) spiral textile braid. Outer layer: black EPDM rubber. Operating temperature: from -40°C to +120°C (temporarily up to +140°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSpiral hose intended for pneumatic control systems, hand tools, industrial robots, etc. Finished on both ends with a straight section of 100 mm in length and external BSPT threaded ends. The stated total length is the maximum length of the hose when stretched. Hose material: blue polyamide PA 11/12 (nylon). Working pressure: up to 27 bar (depending on the diameter and wall thickness of the hose). Operating temperature: from -40°C to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPUSH-IN hose for lubricating products with calibrated outer diameter intended for connection with PUSH-IN plug couplings. For operating temperatures above +20°C, the maximum working pressure of the hose should be reduced according to the correction factor value: (operating temperature/correction factor) +20°C/1.00; +30°C/0.83; +40°C/0.72; +50°C/0.64; +60°C/0.58; +70°C/0.52; +80°C/0.47. Material: polyamide 66. Operating temperature: from 0°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSuction and discharge hose intended for the transfer of industrial water, sewage, sludges, non-corrosive liquids, etc. Lightweight, flexible, resistant to kinks and vacuum. The outer layer is resistant to ozone and weather conditions. Commonly used for pumps in industry, construction, and agriculture. Installation – depending on the diameter and type of fittings using clamps, brackets, compression sleeves, tapes. Standard length: 60 m (or 120 m - contact Tubes International). Inner layer: black SBR rubber. Reinforcement: synthetic cord, steel spiral. Outer layer: black SBR rubber. Working pressure: from 5 bar to 10 bar, depending on the hose diameter. Vacuum: 0.9 bar. Operating temperature: from -30°C to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, semi-transparent smooth-walled PTFE hose with excellent chemical resistance. Designed for low-pressure installations of chemicals, paints, fuels, oils, greases, air, gases, water, steam, and water-based fluids – in all types of industry. As it is chemically inert and does not contain components that could leach into the internal medium, it can be used for food substances. Compliant with FDA 21 CFR 177.1550, EU 10/2011, EC 1935/2004, and Italian D.M. 174 06/04/2004. The hose is not antistatic (does not dissipate electric charges for non-conductive substances). Not recommended for pneumatic plug connections. It can also be used as mechanical guidance for hoses or rods due to the low friction coefficient and self-lubricating properties of Teflon. Flame retardant (UL94 V-0) and with a high oxygen index (LOI). Safety factor n = 3:1. The burst and working pressure of the hose decreases at operating temperatures above 20°C and is dependent on its height. Hose material: PTFE (Teflon). Operating temperature: from -60°C to +260°C. Working pressure: from 3 bar to 56 bar - depending on the diameter and wall thickness of the hose.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible pressure hose made of PVC for general purposes and food products. Used for compressed air, water, water-based coolants, light chemicals, and liquid and semi-liquid food products. The smooth inner wall reduces flow losses and ensures ease of cleaning. In the food industry, it can be used for the transfer of hydrated, acidic foods, and alcohols up to 20%, e.g., juices, beverages, beer, wine (simulants A, B, C; up to +40°C and 0.5 h). Not recommended for milk and its derivatives, as well as food substances containing fats and oils. The RAGNO CR hose complies with European requirements 1978/142/EEC, 1935/2004/EC, 1895/2005/EC, and 10/2011/EU (simulants A, B, C), 2023/2006/EC (GMP). Suitable for temporary contact with food during the transfer of food substances - under the conditions specified in the manufacturer's declaration of conformity (available from Tubes International). Inner layer: transparent PVC. Reinforcement: polyester braid. Outer layer: transparent PVC. Working pressure for a temperature of 20°C: from 8 bar to 20 bar - depending on the hose diameter. The working pressure value decreases with increasing temperature. Operating temperature: from -5°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBlack flexible universal hose with exceptional resistance to aging, weather conditions, and ozone, with good chemical resistance. Resistant to temperatures in a wide range from -60°C to +135°C. Extremely flexible, elastic, with high fatigue resistance to deformation, resistant to abrasion. Excellent for use in peristaltic pumps. Used for transfer and dosing in industry and services, e.g., for dispensing soap and disinfectants, cleaning agents, caustic soda, etching and galvanizing chemicals, in glass and window washing systems, etc. The soft hose material (61° Shore (A)) is very flexible and provides excellent longevity of up to 1000 hours of operation in a peristaltic pump. The hose is an alternative to commonly used hoses made from traditional rubber blends such as EPDM and chloroprene. It has good chemical resistance to a range of chemicals, particularly acids and bases, oxidizing agents such as hydrogen peroxide, sodium hypochlorite, or ozone (300 pphm). Resistant to a variety of animal and vegetable fats. Not recommended for hydrocarbons. Resistant to aging and UV radiation. Characterized by low gas permeability compared to rubber hoses. Hose connection by welding is possible. The VACUUM version with thick walls is designed for continuous operation with vacuum and is resistant to cracking and aging. Full hose roll length: 15 m. Working pressure specified relative to burst pressure with a safety factor of 1:5. Material: norprene® - thermoplastic elastomer (TPE). Maximum operating temperature: +135°C. Brittleness temperature: -60°C. Hardness: 61° Shore (A). Density: 0.98 g/cm³. Note: Product packaged in the Clean Room of Tubes International (CLEAN ROOM) adhering to strict standards. Return of the product after opening the packaging is not possible.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsIndustrial hose for cold and hot water for heavy-duty conditions, requiring high flexibility, abrasion resistance, weather resistance, and ozone resistance. Used, among other applications, for cooling and thermostating injection molds. Can be used for air. Application at temperatures above +95°C reduces hose lifespan. Not oil-resistant, also not recommended for air with oil mist. Recommended installation with clamps or ferrules. Inner layer: black EPDM rubber. Reinforcement: synthetic braid. Outer layer: black, blue, or red EPDM rubber. Working pressure: 20 bar. Operating temperature: from -30°C to +95°C (20 bar), from -30°C to +140°C (10 bar), temporarily up to +160°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible hose designed for industrial cooling systems (an alternative to copper tubes) and automotive air conditioning (only for filling and testing functions). Specifically for refrigerants (R22, R134a, R404a, R407c, R410a, R507) and compressor oils of the POE and PAG types. The hose in sizes from 1/12" to 1/4" can also be used for CO2 (R-744) transmission - using CO2 as a refrigerant requires pressures approximately 10 times higher than conventional refrigerants. Inner layer: polyamide (PA), for diameters from 1/12" to 1/4" a PA and TPE (thermoplastic elastomer) blend. Reinforcement: polyester braid. Outer layer: micro-perforated, abrasion-resistant polyurethane. Working pressure: from 45 bar to 120 bar, depending on hose diameter. Operating temperature: from -45°C to +130°C (for water and air up to +70°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSuction and discharge hose intended for the transfer of various chemical substances, mainly for acid, base, ketone, formaldehyde, industrial alcohol, and glycol solutions. Frequently used in industrial plants for draining contaminated water and process water. Also suitable for seawater. Inner and outer layer antistatic R≤106 Ω/m. Available pressure version (without steel spiral) - ORLANDO hose. Vacuum: 0.9 bar. Inner layer: black EPM (EPR) rubber. Reinforcement: synthetic cord, steel spiral. Outer layer: black EPM (EPR) rubber. Working pressure: 10 bar. Operating temperature: from -40°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-quality hose primarily intended for cleaning rooms and equipment in the food industry. It can be used for air, cold and hot water, oil, hydraulic fluids, light chemicals, and cleaning fluids. Strong, flexible, resistant to twisting and kinking. Non-soiling outer layer, weather-resistant and abrasion-resistant, oil and fat resistant, with increased resistance to animal fats. Due to its high durability and low elongation, it is particularly recommended for drum reels. Inner layer: black NBR rubber. Reinforcement: synthetic braid. Outer layer: blue Chemivic® rubber compound (NBR/PVC). Working pressure: 20.7 bar. Operating temperature: from -29°C to +88°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, very flexible and pliable hose designed for the discharge of chemically aggressive vapors and for operation at elevated temperatures. Good temperature resistance, good resistance to acid and solvent vapors. Also resistant to UV radiation, ozone, hydrolysis, and biological corrosion. Durable against bending. Used for mechanical vapor extraction, air conditioning, and ventilation in motor vehicles (buses, cars, and caravans, recreational boats, etc.), at air intakes for engines and compressors, in pellet and plastic dryers, in blow molding machines, etc. Other diameters ranging from 15 to 800 mm available on special order. The flame-retardant version P2SP SE complies with the requirements of DIN 4102 B1 for building materials. Hose material: polyester fabric impregnated with black TPE (thermoplastic elastomer). Wall thickness: 0.4 mm. Reinforcement: steel wire spiral. Operating temperature: from -40°C to +150°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHighly flexible and elastic polyurethane hose, featuring optimal mechanical properties and very high compressive strength over a wide temperature range. Calibrated outer diameter and wall thickness allow for the use of easy-to-use plug couplings from leading manufacturers. Resistant to abrasion, solvents, fuels, and hydrocarbons. Widely used in both pneumatic and hydraulic systems, in industrial robotics, and tool lines. Shore hardness (A): 90°. Available in natural, black, blue, green, red, and yellow colors. Hose material: PUR polyurethane. Working pressure: from 9 bar to 14.3 bar, depending on hose diameter. Operating temperature: from -40°C to +85°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery flexible, abrasion-resistant, tear-resistant, and kink-resistant spiral reinforced hose specifically designed for automotive workshops, for pneumatic control systems, hand tools, industrial robots, etc. Finished on both ends with straight sections of 100 mm and 500 mm in length and external BSPT threaded ends. Shore hardness (A) 98°. The stated total length is the maximum length of the hose when stretched. Hose material: blue polyurethane PUR. Working pressure: up to 15 bar. Operating temperature: from -40°C to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight transparent smooth-walled hose made of natural (non-regenerated) fluoropolymer FEP (fluorinated ethylene propylene), a material with properties similar to PTFE. The hose features excellent chemical resistance, dimensional and shape thermal stability, and a smooth internal and external surface. Good transparency of the hose allows for easy observation of fluid level or flow. UV resistant. Designed for low-pressure installations of aggressive chemicals or where high purity and chemical inertness of the hose material are required. Commonly used in laboratories, chemical and pharmaceutical industries. Due to its excellent insulating properties, it is used in the electronics and semiconductor industries. The hose is not antistatic (does not dissipate electric charges for non-conductive substances). Not recommended for pneumatic plug connections. Flame retardant (UL94 V-0) and with a high oxygen index (LOI). Safety factor n = 4:1. Hose material: FEP. Shore hardness (D) 55. Operating temperature: from -200°C to +206°C. Working pressure: from 4.25 bar to 13 bar - depending on the hose diameter.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible, resistant to kinks and atmospheric conditions welding hose for acetylene made according to ISO 3821 standard. Not recommended for gases produced from fuels, oils, and propane-butane (LPG). Inner layer: black SBR/NR rubber. Reinforcement: synthetic braid. Outer layer: smooth red SBR/NR rubber. Working pressure: 20 bar. Operating temperature: from -20°C to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong and flexible suction and discharge hose made entirely of abrasion-resistant polyurethane with high resistance to fats and oils. The hose is phthalate-free and can be used in the food industry for the transfer of liquid and dry food substances. This includes: - in particular, food fats and oils, e.g., olive oil (simulant D2; up to +40°C and 30 min); - milk and its derivatives, dairy beverages (simulant D1, up to +40°C and 30 min); - hydrated, acidic food, alcohol up to 20%, and dry food (simulants A, B, C, E; up to +70°C and 1 h). In applications not involving direct contact with food (in industry, construction, agriculture), it can be used for water, light chemicals, and other fat-based liquids as well as industrial oils (chemical resistance must be considered). Also used for air, vacuum transfer of dust, powders, granules, and other abrasive bulk materials (abrasiveness and potential static electricity issues must be considered). The very smooth inner surface reduces transmission losses and ensures ease of cleaning. The transparent wall allows for visual flow monitoring. Reinforcement with a dense steel wire spiral provides very good resistance to vacuum and hose collapse. The construction of the hose from polyurethane compared to similar PVC hoses results in significantly greater abrasion resistance, higher strength (working pressure and vacuum), and a wider temperature range with slightly less flexibility. The ARMORVIN TOTAL PU OIL TPHF hose complies with European regulations 1935/2004/EC, 1895/2005/EC, and 10/2011/EU (simulants A, B, C, D1, D2, E), 2023/2006/EC (GMP), and American FDA 21 CFR 177.2600 (d). Suitable for temporary contact with food during the transfer of food substances - under the conditions specified in the manufacturer's declaration of conformity (available from Tubes International). Hose material: transparent polyurethane. Reinforcement: galvanized steel spiral. Working pressure for a temperature of 20°C: from 3 bar to 7 bar - depending on the hose diameter. Operating temperature: from -40°C to +90°C, medium temperature, working pressure dependent on temperature. As the operating temperature increases, the working pressure value of the hose decreases.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe HYPERLINE V (VISIFLON) hose is made of high-quality spiral corrugated PTFE, providing exceptional flexibility, elasticity, and vibration resistance among Teflon hoses. Like any Teflon hose, due to the unique properties of PTFE (wide operating temperature range, resistance to most substances and chemical compounds, minimal surface adhesion), the VISIFLON hose is perfectly suited for the transfer of chemicals, foodstuffs, fuels, oils, paints, solvents, adhesives, dyes, detergents, steam, etc. In cases where there is a risk of static electricity (danger of charge generation and accumulation), VISIFLON hoses made of antistatic Teflon – the antistatic version AS – should be used. Antistatic Teflon is black (contains appropriately distributed graphite in PTFE) and has a resistance of R<108Ω (according to ISO 8031 annex A). This ensures the dissipation and dispersion of electric charges. The selection of the hose in the standard version made of natural PTFE or in the antistatic version should be confirmed with Tubes International. The SS version braid is made of annealed AISI 304 stainless steel wire and provides high pressure resistance. At operating temperatures above +130°C, the maximum working pressure should be reduced by 1% for every 1°C increase in temperature. Available versions of the inner layer: standard (natural white) and antistatic (black). Hose material: spiral corrugated PTFE (Teflon). Reinforcement: AISI 304 steel braid. Working pressure: from 20 bar to 60 bar - depending on the hose diameter. Operating temperature: from -70°C to +230°C. Resistant to full vacuum up to a temperature of: +130°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThick, strong, and flexible pressure hose compliant with the dimensions and requirements of standard EN ISO 6134:2005 type 2 class A (Ω), with steel reinforcement, intended for conveying saturated and superheated steam. The inner layer has good resistance to high temperature and saturated steam. It can be temporarily used for superheated steam at a temperature of 232°C and pressure of 18 bar; prolonged use with superheated steam reduces the hose's lifespan. The outer layer is resistant to temperature, weather conditions, abrasion, and aging. Antistatic R ≤106 Ω. The hose is used in the chemical, petrochemical, energy industries, and other industrial applications. It is not intended for steam cleaners ("dry steam cleaners"). For steam, use special screw-on fittings designed for steam. To extend the lifespan, the hose should be emptied of steam after use to avoid condensate accumulation. Standard length: 60 m (or 120 m - contact Tubes International). Inner layer: black EPDM rubber. Reinforcement: double steel wire braid. Outer layer: black micro-perforated EPDM rubber. Working pressure: 18 bar. Operating temperature: from -40°C to +210°C (temporarily up to +232°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery flexible and lightweight suction and discharge hose intended for water, juices, beverages, and alcohols with a concentration of up to 20%, as well as other food products. Not suitable for fatty substances such as milk or oils. Resistant to vacuum and collapsing due to the embedded steel wire spiral in the hose wall. A significant advantage is its transparent wall resistant to UV radiation, allowing for easy visual monitoring of media flow, as well as the smoothness of its inner part reducing flow losses and ensuring ease of cleaning. Compared to the ARMORVIN HNA hose, it features higher working pressure and greater resistance to vacuum. In applications not involving direct contact with food (in industry, construction, agriculture), it can be used: 1) for light chemicals, water, sludges, and wastewater, other liquids (without fats, oils, and hydrocarbons); 2) for air, vacuum transfer of dust, powders, granules, and other lightly abrasive bulk substances (non-fatty). Abrasiveness and potential static electricity issues should be considered. As a hose reinforced with a steel spiral (without a braid), it exhibits some elongation under pressure, which should be taken into account in applications, especially at elevated temperatures. Standards and requirements: Food industry, contact with food: compliant with European requirements 1935/2004/EC and 10/2011/EU (simulant fluids A, B, and C), 2023/2006/EC (GMP). Hose material: light green transparent PVC. Reinforcement: galvanized steel spiral. Working pressure: from 2 bar to 8 bar, depending on the hose diameter. Operating temperature: from -5°C to +65°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight smooth-walled hose made of PTFE with excellent chemical resistance in various color versions. Made from high-quality PTFE with added dye (material compliant with FDA). Flame retardant (UL94 V-0) and with a high oxygen index (LOI). Application for high-quality plug connections is possible. Safety factor n=4:1. The burst and working pressure of the hose decreases at operating temperatures above 20°C and is dependent on its height. Material: PTFE (Teflon), dyed. Shore hardness (D): 60. Working pressure: from 5.5 to 20 bar. Operating temperature: from -200°C to +260°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong, flexible medium-thickness hose designed for the removal of dust, wood shavings, chips, bulk materials, granules, etc. Suitable for all types of industry, particularly commonly used for the removal of chips and other solid particles in the woodworking, furniture, ceramics, and plastics industries. The dense reinforcing spiral provides greater resistance to vacuum compared to ECO 0.4 and ECO 0.6 hoses. Flexible, less compressible, smooth inside, and elastic - even at low temperatures. Good abrasion resistance, also resistant to microbes and hydrolysis. Non-toxic, free from halogen compounds and plasticizers. Resistant to oils and gasoline. The hose is marked with an arrow indicating the correct direction of medium flow. The wall thickness of the hose is measured between the spiral. Installation on couplings with bridge clamps (right-handed). Other diameters may be available upon special request. The hose is available in the following versions: ECO – standard version, ECO SE – flame-retardant material version (UL94 V-2), ECO AS – permanently antistatic version ISO 8031: R <109 Ω, TRGS 727 (6.4.2.4): R <2.5 x 108 Ωm, directive 2014/34/EU (ATEX): can be used in specific explosion hazard zones after risk analysis, ECO SE AS – antistatic and flame-retardant version (available on special request). The ECO hose is produced in a manufacturing process compliant with sustainable development policies, using raw materials from recycled clean production waste, renewable energy, closed water circulation, and other innovations. Hose material: transparent polyester-polyurethane. Reinforcement: steel wire spiral. Wall thickness measured between the spiral: 0.7 mm. Operating temperature: from -40°C to +100°C (temporarily up to +125°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal industrial hose designed for washing floors and equipment with hot water in the meat, food, dairy industries, etc. The inner layer meets FDA 21 CFR 177.2600 and BfR XXI category 3 requirements. The outer layer complies with ISO 22196:2011 (Ref.1), is antibacterial, and resistant to animal and vegetable fats. The outer layer is resistant to weather conditions, ozone, and abrasion. The hose is also intended for drum reels. Inner layer: white smooth synthetic rubber. Reinforcement: synthetic braid. Outer layer: blue PVC/NBR rubber. Working pressure: 10 bar. Operating temperature: from -20°C to +95°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCreamy-beige flexible hose, odorless and tasteless, non-toxic. Resistant to temperatures ranging from -60°C to +135°C. Extremely flexible, elastic, with high fatigue resistance to deformation, abrasion-resistant. Excellent for use in peristaltic pumps. Used for dispensing and portioning cold and hot food products, for soap, detergents, and disinfectants, for paints and toners, pesticides and fertilizers, as well as in laboratories. The soft hose material (61° Shore-A) is highly flexible and provides excellent longevity of up to 1000 hours of operation in a peristaltic pump. The hose is an alternative to commonly used PVC or silicone hoses. It has good chemical resistance to a range of chemicals, particularly acids and bases, oxidizing agents such as hydrogen peroxide, sodium hypochlorite, or ozone. Resistant to a variety of animal and vegetable fats. Not recommended for hydrocarbons. Resistant to aging and UV radiation. Meets FDA 21 CFR 177.2600 requirements for food contact. Multiple sterilization possible with steam in autoclaves, CIP and SIP cleaning in the installation, ethylene oxide, or radiation methods. Full hose roll length: 15 m. Material: TPE (Norprene® – thermoplastic elastomer). Maximum operating temperature: up to +135°C. Brittleness temperature: -60°C. Hardness: 61° Shore (A). Density: 0.98 g/cm³. Note: Product packaged in the Clean Room of Tubes International (CLEAN ROOM) adhering to strict standards. Return of the product after opening the packaging is not possible.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-quality suction and pressure hose "FULL OHM" completely antistatic (Ω/T), designed for the transfer of highly flammable and chemically aggressive substances. The inner layer is made of perfluoroalkoxy polymer PFA (fluoropolymer with properties similar to Teflon), antistatic (R<106 Ω), mirror-smooth, meeting high hygiene requirements (FDA, USP, European EU). Intermediate layers made of synthetic rubber, reinforced with synthetic cord and a steel wire spiral. The outer layer is MARBLE type (marbled), smooth, coated with polyethylene (UPE), antistatic (R<106 Ω), meeting FDA requirements, odorless and tasteless, resistant to abrasion, ozone and aging, chemicals, and short-term action of aggressive acids. An advantage of the MARBLE layer is its low friction coefficient - the hose glides and does not soil the surfaces it contacts, making it easy to clean. Excellent chemical resistance of PFA and antistatic properties of both the inner and outer layers (R<106 Ω) as well as across the wall of the hose (R<109 Ω) make the hose a costly but technically ideal solution for applications requiring the highest safety in all explosion hazard zones (ATEX). Used in the chemical, petrochemical, pharmaceutical, and cosmetic industries, as well as in biotechnology. Not intended for sterilization in an autoclave. A version with additional built-in copper wires (M/T) is available on special order. Standards and requirements: Chemical hoses: EN 12115:2011. Food industry, contact with food: 1935/2004/EC, 2023/2006/EC (GMP); inner layer: 10/2011/EU, USP Class VI, FDA 21 CFR 177.1550; ISO 10993-4,-10,-11, non-cytotoxic (ISO 10993 Part 5); outer layer: FDA 21 CFR 177.1520. Contains no plasticizers, phthalates, or animal-derived substances. Explosive atmospheres: ATEX Directive (zones: 0, 1, 2, 20, 21, 22), EN 50014/IEC 60079-0. Confirmation of resistance and application conditions requires contact with Tubes International. Assembly: Use smooth fittings with a spigot ("tail" for the hose) that do not have sharp or high ribs that could cut or damage the inner layer of PFA when tightened. The diameter of the spigot should be precisely matched to the diameter of the hose to ensure tightness. Assembly with clamp sleeves or shell clamps. Inner layer: black PFA polymer. Reinforcement: synthetic cord, steel spiral. Outer layer: white-black UPE polyethylene, synthetic rubber. Working pressure: 10 bar. Vacuum: 0.9 bar. Operating temperature: from -35°C to +130°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong pressure hose designed for cooling water in foundries, smelters, and all applications where rubber hoses operate close to a heat source. Glass fiber covering resistant to temperatures up to +530°C caused by thermal radiation. Used in cooling systems. Particularly recommended for water installations near metallurgical furnaces. Resistant to short-term exposure to splashes of molten hot metal. Non-conductive – electrical resistance of the rubber compound ≥108 Ω/m. Inner layer: white insulating EPDM rubber. Reinforcement: synthetic cord. Outer layer: EPDM rubber covered with glass fiber. Working pressure: 20 bar. Operating temperature: from -40°C to +120°C (external up to +530°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible hose intended for air, water, and other media. Resistant to chemicals, physiologically safe, tasteless. Meets BGA and FDA requirements. Available in natural, black, and blue colors. Hose material: LDPE polyethylene. Working pressure: from 5 bar to 17 bar, depending on the hose diameter. Operating temperature: from -30°C to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose - spiral nylon polyamide tube intended for all types of pneumatic devices, control systems, etc. Finished on both ends with a straight section of 100 mm in length and external BSPT threaded fittings. The stated total length is the maximum length of the hose when stretched. Hose material: blue polyamide PA 12 (nylon). Working pressure: up to 28 bar (depending on hose diameter). Operating temperature: from -40°C to +80°C.
