Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible hose designed for the transmission of LPG (liquid and gas) and natural gas. The outer layer is resistant to ozone and weather conditions. Antistatic (R <106 Ω/m). It has a copper wire ensuring electrical continuity between the hose ends. Manufactured according to standard EN 1762:2018, type D. Inner layer: black synthetic rubber. Reinforcement: synthetic braid. Outer layer: black micro-perforated synthetic rubber. Working pressure: 25 bar. Operating temperature: from -30°C to +70°C.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-quality suction and discharge hose designed for the transfer of wine, beer, fruit juices, and other food substances free of fats, requiring the use of odorless and tasteless rubber. It is free from phthalates and bisphenol A. Designed for high-class wines and spirits, for use in breweries and distilleries. Widely used in the spirits industry for the transfer of strong alcohols with concentrations up to 96%. It features copper wires that ensure electrical continuity between the hose ends, enhancing the safety of transferring high-proof, flammable alcohol (ensure contact of the wire with the end during installation). The outer layer is resistant to abrasion, aging, and weather conditions. Standards and requirements: Food industry, food contact 1935/2004/EC, 2023/2006/EC (GMP). Inner layer compliant with FDA 21 CFR 177.2600, BfR XXI cat.2, D.M. 21/03/73. Inner layer: white butyl rubber (IIR). Reinforcement: synthetic cord, steel spiral. Outer layer: red butyl rubber (IIR). Working pressure: 10 bar. Vacuum: 0.9 bar. Operating temperature: from -40°C to +120°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery lightweight and flexible suction and discharge hose for agriculture, food industry, and general applications. Designed for water, light chemicals, sludges and wastewater, plant protection products, and other liquids (excluding fats, oils, and hydrocarbons). Also suitable for air, vacuum transfer of dust, powders, granules, and other lightly abrasive bulk materials (non-greasy). Abrasiveness and potential static electricity issues should be considered. In the food industry, it can be used for the transfer of hydrated food, acidic substances, and alcohols up to 20%, e.g., juices, beverages, beer, wine (simulants A, B, C; up to +40°C). Not recommended for milk and its derivatives or food substances containing fats and oils. Reinforced with a hard PVC spiral, resistant to impact, ensuring good vacuum resistance and preventing hose collapse. The outer surface is corrugated, while the inside is smooth. The AGROFLEX LD hose complies with European regulations 1935/2004/EC, 10/2011/EU (simulants A, B, C), 2023/2006/EC (GMP). Suitable for temporary contact with food during the transfer of food substances - under conditions specified in the manufacturer's declaration of conformity (available from Tubes International). Hose material: green transparent PVC. Reinforcement: white spiral made of hard PVC. Working pressure at 20°C: from 2 bar to 6 bar. As the operating temperature increases, the working pressure value of the hose decreases. Operating temperature: from -10°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe hose is made of a smooth, seamless PTFE tube. The Teflon tube of the hose is extruded under strictly defined and controlled conditions, ensuring its highest quality, minimal porosity, and maximum flexibility and elasticity achievable for a smooth PTFE hose. The braid is made of annealed AISI 304 stainless steel wire with a high tensile strength of 1700 N/mm², with a strictly controlled angle of arrangement and tension of the braid wire bundles, resulting in minimal length changes of the hose under high pressure. Due to the unique properties of PTFE (wide operating temperature range, resistance to most substances and chemical compounds, negligible surface adhesion), the SMOOTHBORE hose is perfectly suited for the transfer of chemicals, foodstuffs, fuels, oils, paints, solvents, adhesives, dyes, detergents, steam, etc. - as well as for classic high-pressure hydraulic oil installations. In cases where there is a risk of static electricity (danger of charge generation and accumulation), SMOOTHBORE hoses made of antistatic Teflon should be used – the antistatic version AS. The antistatic Teflon of version AS is black (contains appropriately distributed carbon in PTFE) and has a resistance R <10⁸ Ω (according to ISO 8031 annex A). This ensures the dissipation and dispersion of electric charges. The safety factor is 3:1; if a factor of 4:1 is required (e.g., according to EN 16643), the values should be multiplied by 0.75. At operating temperatures above +130°C, the maximum working pressure specified in the parameters should be reduced by 0.75% for each 1°C above this temperature. For example, at a temperature of 170ºC, the maximum working pressure for the hose AF-SWSB-06 is: 240 bar – (170°C-130°C) x 0.75 = 240 bar – 30% = 168 bar. The value "Wall thickness [mm]" provided in the Technical Data refers to the PTFE layer. Hose material: smooth PTFE (Teflon). Reinforcement: single braid of AISI 304 steel. Working pressure: from 55 bar to 240 bar - depending on the hose diameter. Operating temperature: from -70°C to +260°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUnreinforced and highly flexible transparent PVC hose intended for non-pressurized (or very low-pressure) transfer of water, beer, wine, alcohols with a concentration of up to 20%, juices, beverages, and other food liquids. Not recommended for milk and dairy products, as well as oils and fatty food substances. Also used for liquids in general industrial applications, for light chemicals (e.g., diluted acids and bases), and as a protective cover for pipes, conduits, hoses, etc. For the hose, the stated pressure value is an indicative value of the recommended working pressure, assumed for a typical PVC hose, with a safety factor of 5:1. The use of the hose for a specific working pressure should be preceded by testing under working conditions. Standards and requirements: Food industry, contact with food: compliant with European requirements 1935/2004/EC and 10/2011/EU (simulant fluids A, B, and C), 2023/2006/EC (GMP). Hose material: transparent PVC. Working pressure: low, up to several bar, depending on temperature. Operating temperature: from -5°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsWidely used for washing floors and industrial equipment with hot water. Also suitable for outdoor use. Resistant to weather conditions and abrasion. Not resistant to oil, not recommended for air with oil mist. Compared to the "Tubes 2116," it has a thicker wall. Inner layer: white EPDM rubber. Reinforcement: polyester braid. Outer layer: red or blue micro-perforated EPDM rubber. Working pressure: 10 bar. Operating temperature: from -40°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCreamy, flexible chemical hose with a multi-layer construction designed specifically to combine chemical resistance with high longevity in peristaltic pumps. Smooth inner layer with very good chemical resistance, free of plasticizers, resistant to acids, bases, salts, alcohols, and ketones, with low absorption and adsorption of water-based fluids. Outer layer made of thermoplastic elastomer (Norprene®) provides excellent properties and high longevity when used in peristaltic pumps. The hose meets hygiene requirements and is suitable for food contact: US FDA 21 CFR 177.1520 and is resistant to most cleaning and disinfecting agents. Sterilization by steam, ethylene oxide, or radiation. Ideal for dosing soap and detergents, laundry detergents, and dishwashing liquids. Used for the production and dosing of various chemicals in all sectors of industry. Full hose roll length is 15 m. The specified working pressure is defined relative to the burst pressure with a safety factor of 1:5. Material: polyolefin / TPE (Norprene® - thermoplastic elastomer). Operating temperature: from -60°C to +74°C. Brittleness temperature: -60°C. Hardness: 61° Shore (A). Density: 0.98 g/cm³. Note: Product packaged in the Clean Room of Tubes International (CLEAN ROOM) adhering to strict standards. Return of the product after opening the packaging is not possible.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, very flexible and elastic hose designed for the extraction of hot vapors, smoke, gases, blowing, and the discharge of cooling air. Reinforced version of the SILICONE 1 hose, featuring two layers of fabric coated with silicone and a steel spiral placed between the layers. Chemically resistant, UV resistant, and aging resistant. Used, among others, for gas extraction in the metallurgical industry, foundries, glass and ceramic industries, for hot air in industrial dryers, in printing houses and paper mills, in vehicles and engines for cooling air, incinerators, as well as for the extraction of exhaust gases and welding fumes. Smooth inside (when straightened), with a very small bending radius allowing easy installation in tight spaces of equipment and vehicles. Not recommended for continuous dynamic bending. Installation with clamps. Other diameters and lengths, soft ends of sections, etc., available on special order. Hose material: two layers of glass fabric coated with red silicone. Reinforcement: steel wire spiral, double external fiberglass cord. Operating temperature: from -70°C to +250°C (temporarily up to +300°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible hose with calibrated outer diameter, intended for pneumatic, hydraulic, oil, fuel, lubrication, and chemical installations. Compliant with DIN 73378 standard. Available in colors: natural, blue. Hose material: polyamide PA 12 (nylon). Working pressure: from 11 bar to 40 bar, depending on the diameter and wall thickness of the hose. Operating temperature: from -10°C to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery flexible, abrasion-resistant, crack-resistant, and kink-resistant spiral hose designed for pneumatic installations in automotive braking systems. Resistant to oil, gasoline, ozone, and UV radiation. Maintains high flexibility at low temperatures. Finished on both ends with external metric threaded fittings. The stated total length is the maximum length of the hose when stretched. Available in yellow and red. Hose material: polyurethane. Spring material: galvanized steel. Maximum working pressure: 10 bar. Operating temperature: from -40°C to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible hose with a smooth inner surface designed for compressed air, water, light chemicals, fungicides, fertilizers, and pesticides. Commonly used in agriculture for spraying, irrigation, and applications. The outer layer is resistant to abrasion and weather conditions. Inner layer: black PVC. Reinforcement: polyester braid (double polyester braid for REFITTEX 80 BAR version). Outer layer: black PVC. Working pressure at 20°C: 20 bar (white stripe), 40 bar (blue stripe), 80 bar for internal diameter 13 mm, above 50 bar (red stripe). As the operating temperature increases, the working pressure value of the hose decreases. Operating temperature: from -20°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDouble welding hose for oxygen and acetylene. Manufactured according to ISO 3821 standard. Inner layer: black synthetic rubber. Reinforcement: double polyester braid. Outer layer: smooth synthetic rubber in red (acetylene) and blue (oxygen). Working pressure: 20 bar. Operating temperature: from -32°C to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe unbraided version TO (Tube Only) of the VISIFLON hose, made of high-quality spiral corrugated PTFE (right-handed), provides exceptional flexibility, elasticity, and vibration resistance among Teflon hoses. The VISIFLON TO hose can be used for the transfer of chemicals, foodstuffs, fuels, oils, paints, solvents, adhesives, dyes, and detergents under very low pressure conditions. The standard version of VISIFLON TO is made of natural, translucent PTFE, allowing for visual flow control. The antistatic version VISIFLON TO AS made of carbon-infused Teflon (black) ensures the dissipation and dispersion of electric charges for substances and conditions at risk of static electricity. The hose material meets FDA requirements (21 CFR 177.1550 for VISIFLON TO, 21 CFR 178.3297 for VISIFLON TO AS). It is flame-retardant (UL94 V-0) and has a high oxygen index (LOI). Hose assembly requires straightening the corrugations along the length of the tail of the fitting, performed on special equipment. The fittings can then be installed by crimping with stainless steel ferrules. The working pressure value for the unbraided VISIFLON Teflon hose applies only up to a temperature of 100°C, and in the case of vacuum, up to a temperature of 80°C. Above these temperatures, there is a decrease in working pressure and vacuum. If the hose is to be used above these temperatures, this must be taken into account, and appropriate tests should be conducted under operating conditions. Hose material: spiral corrugated PTFE (Teflon). Operating temperature: from -70°C to +100°C (up to +230°C). Working pressure: from 2 bar to 4 bar - depending on the hose diameter.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe hose is made of a smooth, seamless PTFE tube. The Teflon tube of the hose is extruded under strictly defined and controlled conditions, ensuring its highest quality, minimal porosity, and maximum flexibility and elasticity achievable for a smooth PTFE hose. The heavy-duty HW version is recommended for harsher working conditions, gases (up to 100 bar), and applications where cyclic temperature changes occur. The braid is made of annealed AISI 304 stainless steel wire with a high tensile strength of 1700 N/mm², with a strictly controlled angle of arrangement and tension of the braid wire bundles, resulting in minimal length changes of the hose under high pressure. Due to the unique properties of PTFE (wide temperature range, resistance to most substances and chemical compounds, negligible surface adhesion), the SMOOTHBORE hose is perfectly suited for the transfer of chemicals, foodstuffs, fuels, oils, paints, solvents, adhesives, dyes, detergents, steam, etc. - as well as for classic high-pressure hydraulic oil installations. In cases where there is a risk of static electricity (danger of charge generation and accumulation), SMOOTHBORE hoses made of antistatic Teflon should be used – the antistatic version AS. The antistatic Teflon of version AS is black (contains appropriately distributed carbon in PTFE) and has a resistance R <10⁸ Ω (according to ISO 8031 annex A). This ensures the dissipation and dispersion of electric charges. The safety factor is 3:1; if a 4:1 factor is required (e.g., according to EN 16643), the values should be multiplied by 0.75. At operating temperatures above +130°C, the maximum working pressure specified in the parameters should be reduced by 0.75% for each 1°C above this temperature. For example, at a temperature of 170°C, the maximum working pressure for hose AF-HWSB-06 is: 260 bar – (170°C-130°C) x 0.75 = 260 bar – 30% = 182 bar. The value "Wall thickness [mm]" provided in the Technical Data refers to the PTFE layer. Hose material: smooth PTFE (Teflon). Reinforcement: single braid of AISI 304 steel. Working pressure: from 55 bar to 240 bar - depending on the hose diameter. Operating temperature: from -70°C to +260°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose designed specifically for the transfer of AdBlue® (AUS32, DEF) - 32.5% aqueous urea solution. The inner layer of the hose consists of black, smooth, antistatic (R‹10^6 Ω/m) EPDM rubber vulcanized without sulfur. The inner layer of the hose is free from contaminants such as aluminum, calcium, chlorine, copper, iron, potassium, magnesium, sodium, nickel, and zinc, ensuring the highest purity of the medium in accordance with ISO 22241-2. This is particularly important in the automotive industry, where AdBlue® acts as a reductant to decompose harmful nitrogen oxides in the SCR catalyst. Its use allows compliance with European emission standards EURO 4, 5, and 6. For AdBlue® to be effective, it must be very pure, necessitating the use of specialized hoses, tanks, and fittings that are resistant to AdBlue® and do not contaminate it. Ends and fittings for AdBlue® should be made of stainless steel or suitable plastic. Besides automotive applications, the hose is also used in the chemical industry, for example, in the production of nitrogen fertilizers. Inner layer: black EPDM rubber. Reinforcement: synthetic braid. Outer layer: black EPDM rubber. Working pressure: 10 bar or 20 bar. Operating temperature: from -40°C to +100°C (temporarily up to +120°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose designed for conveying saturated steam, with good resistance to high temperature, abrasion, and ozone. Available on request, hose according to standard EN ISO 6134:2005 type 1 class A. Standard length: 60 m (or 120 m - contact Tubes International). Inner layer: black EPDM rubber. Reinforcement: synthetic cord. Outer layer: black EPDM rubber. Working pressure: 6 bar. Operating temperature: from -40°C to +165°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThick, strong hose designed for oxygen lances in the metallurgical industry. The outer layer is self-extinguishing and made according to ASTM C 542 standard. Inner layer: black CR rubber. Reinforcement: double textile cord, fiberglass spacer. Outer layer: yellow or blue CR rubber. Working pressure: 30 bar. Operating temperature: from -30°C to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible PVC hose reinforced with double polyester braid designed for washing under medium pressure with cold and hot water as well as light chemicals in the food industry. It features exceptional temperature resistance - up to +70° at a working pressure of 40 bar. Compliant with European requirements for food substances 1935/2004 CE and 2007/19/CE (simulated fluids A, B, C). Use crimped fittings for THERMOCLEAN hoses. Inner layer: gray, smooth PVC. Reinforcement: double polyester cord. Outer layer: blue PVC. Working pressure: 80 bar. Operating temperature: from -10°C to +70°C (temporarily up to +80°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMedium thickness, flexible hose designed for the removal of dust, wood shavings, chips, cuttings, lightweight bulk materials, etc. Specifically designed according to the requirements of the woodworking and furniture industries, it can also be used in other industrial fields. Compliant with DIN 26057 Type 2. Antistatic and flame-retardant, ensuring high workplace safety. Less flexible and compressible than SMARTFLEX® 0.4 and 0.6, but smooth inside, flexible even at low temperatures. With very good abrasion resistance, also resistant to microbes and hydrolysis. Free from halogen compounds and plasticizers. Resistant to oils and gasoline. The optimal direction of medium flow is marked with an arrow. The wall thickness of the hose is measured between the spiral. Installation on couplings with bridge clamps (right-handed). Other diameters may be available upon special request. Antistatic properties: permanently antistatic (according to ISO 8031 resistance R <109 Ω, according to German technical regulations TRGS 727 (6.4.2.4) specific resistance R < 2.5 x 108 Ωm, according to directive 2014/34/EU (ATEX) can be used in specific explosion hazard zones - which must be preceded by a risk analysis). After effective double grounding of the spiral, it can be treated as electrically conductive – in accordance with BGI 739-2 recommendations. Flame-retardant – according to DIN 4102 class B1. Hose material: transparent polyester-polyurethane. Wall thickness measured between the spiral: 0.7 mm. Reinforcement: steel wire spiral. Operating temperature: from -40°C to +100°C (temporarily up to +125°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong suction and discharge hose designed for the transfer of food substances, requiring the use of odorless and tasteless rubber. It contains no phthalates or bisphenol A. Thanks to the steel spiral reinforcement, it has good resistance to vacuum. Suitable for milk and its derivatives, as well as wine, beer, and fruit juices. Not recommended for oils and fatty food substances. Widely used in the food industry. The outer layer of the hose is resistant to abrasion and weather conditions. Standards and requirements: Food industry, contact with food: 1935/2004/EC and 2023/2006/EC (GMP). D.M. 21/03/73, FDA 21 CFR 177.2600, BfR XXI cat. 2. Inner layer: white natural rubber (NR). Reinforcement: synthetic cord, steel spiral. Outer layer: blue EPDM rubber. Working pressure: 6 bar. Operating temperature: from -25°C to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose designed for hot water mixed with antifreeze fluids. Used in cooling and heating systems, for pumps in engines and machines. Inner layer resistant to heat and cooling fluids. Outer layer resistant to heat and aging. Manufactured according to standard DIN 73411:79. Roll length: 60 m or 120 m. Inner layer: black EPDM rubber. Reinforcement: synthetic cord. Outer layer: black EPDM rubber. Working pressure: from 2 bar to 4 bar - depending on the hose diameter. Operating temperature: from -40°C to +120°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsTranslucent, yellow, flexible hose designed specifically for fuel and lubricating oils. Resistant to swelling and hardening due to hydrocarbon exposure, significantly reduces the risk of cracking and leakage. Minimal extractability ensures fuel cleanliness, and low permeability to aromatic substances protects the operator and the environment. Ozone and UV radiation resistant. The flexibility of the hose facilitates installation even in tight spaces. The translucent wall allows for flow monitoring. The hose is resistant to most petroleum products and fuels (including those with up to 10% ethanol) and can be used for gasoline, kerosene, diesel, heating oil, lubricants, cutting fluids, and glycol-based fluids. Widely used and proven in thousands of applications: small engines, automotive, recreational vehicles, lawn mowers, saws, cooling and lubrication systems, cutting and polishing equipment. Full hose roll length: 15 m. Working pressure defined relative to burst pressure with a safety factor of 1:5. Material: PVC (special). Maximum operating temperature: +74°C. Brittleness temperature: -37°C. Hardness: 57° Shore (A). Density: 1.26 g/cm³. Note: Product packaged in the Clean Zone of Tubes International (CLEAN ROOM) adhering to strict standards. Return of the product after opening the packaging is not possible.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPolyurethane spiral hose designed for pneumatic control systems, hand tools, industrial robots, etc. Resistant to abrasion, rupture, and kinking, successfully used in the automotive industry as well. Its high flexibility is maintained even after many years of use. Finished on both ends with straight sections of 100 mm and 500 mm and external BSPT threaded ends (without springs for an outer diameter of 16 mm). The stated total length is the maximum length of the hose when stretched. Hose material: blue polyurethane PUR. Working pressure: up to 17 bar (depending on hose diameter). Operating temperature: from -40°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery lightweight, flexible suction and discharge hose designed for the transfer of chemical substances. Made from thermoplastic vulcanizate TPV – a material that combines the processing advantages of thermoplastic polymers (PP – polypropylene) with the properties of vulcanized rubber (EPDM). Good chemical resistance - similar to EPDM rubber allows for use with many substances, including acids (hydrochloric, sulfuric), bases, salts, alcohols, glycols, and ketones, concentrated detergents. Not recommended for fuels, oils, aromatic solvents. Resistant to weather conditions, aging, and abrasion (abrasion resistance according to ISO 4649:150 mm³). Low weight and small bending radius of the hose ensure ease of handling, which can be an advantage when transferring from tankers and containers. A special version, VACUPRESS SUPER CHEMI (diameters up to 63 mm), is available on special order with an inner layer lined with polyethylene (LLDPE), which increases the chemical resistance of the hose and allows its use with concentrated hydrochloric and sulfuric acids, nitric acid, as well as aggressive herbicides and insecticides. Inner layer: thermoplastic rubber TPV. Reinforcement: polyester braid, galvanized steel spiral. Outer layer: thermoplastic rubber TPV. Working pressure for temperature +20°C: from 7 to 15 bar - depending on the diameter of the hose. Operating temperature: from -25°C to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe HYPERLINE FX hose is an optimal solution for industrial applications where high flow rates, chemical and temperature resistance, and permeation resistance are required. It is perfectly suited for the transfer of chemicals, fuels, oils, paints, solvents, adhesives, dyes, gases, and steam, detergents, water, and food substances. At operating temperatures above +130°C, the maximum working pressure specified in the table should be reduced by 1% for each 1°C above this temperature. For example, at a temperature of 170°C, the maximum working pressure for the hose AF-FXAM-10 is: 70 bar – (170°C-160°C) x 1 = 70 bar – 40% = 42 bar. In cases where a substance that is a poor conductor and has potential electrification properties flows through the PTFE hose, the electric charge will accumulate on the inner surface of the PTFE, and to avoid static electricity issues, an antistatic AS variant of PTFE is used. Antistatic Teflon in the AS version contains appropriately distributed graphite in the PTFE and has a resistance R <108 Ω (according to ISO 8031 annex A). Hose material: smooth inside, corrugated outside PTFE (Teflon) - natural white and antistatic - black. Reinforcement: aramid braid. Working pressure: from 35 bar to 77 bar - depending on the hose diameter. Operating temperature: from -70°C to +180°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong and flexible pressure hose with steel reinforcement for conveying saturated steam. The inner layer has good resistance to high temperatures, saturated steam, and the phenomenon of pop-corning (destruction of the inner layer due to the ingress of steam condensate). It can temporarily withstand superheated steam at a temperature of 230°C and a pressure of 18 bar; prolonged use with superheated steam reduces the hose's lifespan. The outer layer is resistant to temperature, weather conditions, abrasion, and aging. The hose is used in the chemical, petrochemical, and energy industries, as well as in other industrial applications. It is not intended for steam cleaners ("dry steam cleaners"). For steam, use special screw-on fittings designed for steam. To extend the lifespan, the hose should be emptied of steam after use to avoid condensate accumulation. Safety factor: 10:1. Standard length: 60 m. Inner layer: black IIR rubber. Reinforcement: double steel wire braid. Outer layer: red EPDM rubber, micro-perforated. Working pressure: 18 bar. Operating temperature: from -40°C to +210°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible hose designed for high-pressure grease lubrication systems. Standard: DIN 1283. Inner layer: polyester. Reinforcement: single synthetic braid. Outer layer: polyurethane (130A), micro-perforated polyurethane (130C). Operating temperature: from -40°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal flexible high-quality polyurethane hose with a braid produced in the United Kingdom. Designed for water, air, oils, fuels, lubricants, chemicals, and granules. Stronger than similar PVC hoses, maintaining its shape, resistant to kinking, hydrolysis, and abrasion, flexible at low temperatures. Contains no cadmium, silicone, plasticizers, or halogen compounds. Inner layer: transparent polyurethane-polyether. Reinforcement: polyester braid. Outer layer: transparent polyurethane-polyether. Working pressure at 20°C: from 10 bar to 20 bar - depending on the hose diameter. Operating temperature: from -30°C to +70°C (temporarily +100°C). As the operating temperature increases, the working pressure value of the hose decreases.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsColorless, semi-transparent, reinforced flexible hose made of platinum-cured silicone rubber. Designed for higher pressures. Used in the pharmaceutical, cosmetic, food, biotechnology industries, sterile filling lines, water treatment systems, vaccine production, bioreactors. Characterized by an exceptionally smooth internal surface that prevents the deposition and adhesion of contaminants inside the hose and the development of bacteria. This facilitates complete cleaning and sterilization of the hose. The smooth internal layer also reduces flow resistance through the hose. Low extractability, non-toxicity, non-hemolytic, and non-pyrogenicity ensure total fluid purity in sensitive applications. Minimal biological load (bioburden). Meets hygienic requirements of the American FDA 21 CFR 177.2600, 3-A, and USP Class VI. Sterilization possible by steam (30 min, 1 bar, 121°C), CIP and SIP cleaning of installations, ethylene oxide, or radiation (up to 5 Mrad). Full hose roll length 15 m (from internal diameter 31.8 mm – 7.5 m). Working pressure defined relative to burst pressure with a safety factor of 1:4. Material: silicone (platinum). Maximum operating temperature: up to +160°C. Brittleness temperature: -80°C. Hardness: 70° Shore (A). Density: 1.18 g/cm³. Note: Product packaged in the Clean Room of Tubes International (CLEAN ROOM) adhering to strict standards. Return of the product after opening the packaging is not possible.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong, flexible, thick hose designed for the removal of sawdust, chips, shavings, bulk materials, etc. Specifically designed according to the requirements of the woodworking and furniture industries, it can also be used in other industrial fields. Compliant with DIN 26057 Type 3. Antistatic and flame-retardant, ensuring high work safety. Thick wall and dense reinforcing spiral provide high pressure parameters. Very smooth inside, low compressibility. Flexible even at low temperatures. Excellent abrasion resistance, also resistant to microbes and hydrolysis. Free of halogen compounds and plasticizers. Resistant to oils and gasoline. The optimal flow direction of the medium is marked with an arrow. The wall thickness of the hose is measured between the spiral. Installation on couplings with bridge clamps (right-handed). Other diameters may be available upon special request. Antistatic properties: permanently antistatic (according to ISO 8031 resistance R <109 Ω, according to German technical regulations TRGS 727 (6.4.2.4) specific resistance R < 2.5 x 108 Ωm, according to directive 2014/34/EU (ATEX) can be used in specific explosion hazard zones - which must be preceded by a risk analysis). After effective double grounding of the spiral, it can be treated as electrically conductive – in accordance with BGI 739-2 recommendations. Flame-retardant – according to DIN 4102 class B1. Wall thickness measured between the spiral: 1.4 mm. Hose material: transparent polyester-polyurethane. Reinforcement: steel wire spiral. Operating temperature: from -40°C to +100°C (temporarily up to +125°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, highly flexible hose used in systems where frequent contact with water occurs (high resistance to microorganisms and hydrolysis), detergents, and solvents. Maintains high flexibility at low temperatures, resistant to abrasion and kinking. Calibrated outer diameter allows compatibility with plug couplings. Shore hardness (A): 98°. Complies with FDA requirements. Available in natural, black, blue, green, and red colors. Hose material: polyether-polyurethane. Working pressure: from 16 bar to 24 bar, depending on hose diameter. Operating temperature: from -40°C to +85°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery flexible spiral hose over a wide temperature range, resistant to abrasion, welding sparks, and hot metal chips. Designed for pneumatic control systems, hand tools, industrial robots, etc. Resistant to UV radiation and aging. Finished on both ends with straight sections of 100 mm and 500 mm and external BSPT threaded ends. Shore hardness (A) 98°. The stated total length is the maximum length of the hose when stretched. Hose material: flame-retardant polyurethane PUR. Working pressure: up to 13 bar (depending on hose diameter). Operating temperature: from -40°C to +70°C. Standards: UL 94 VO (outer layer). Color black.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong suction and discharge hose with an inner layer made of chemically resistant polyethylene with ultra-high molecular weight (UPE, UHMWPE). The inner layer is resistant to most acids and bases as well as many other aggressive chemicals (at elevated but not very high temperatures), making the hose widely used in the chemical and petrochemical industries. The UPE inner layer also complies with food-grade hose requirements, is free from phthalates and polycyclic aromatic hydrocarbons (PAH), and features a low friction coefficient during flow, preventing medium deposition on the walls. This significantly facilitates cleaning and allows for use in the cosmetic, pharmaceutical, and food industries as well. Reinforced with synthetic cord and steel spiral, with built-in copper wires for electrostatic discharge. The outer layer is made of chemically resistant EPDM rubber, resistant to abrasion, ozone, and weather conditions. Compliant with EN 12115:11 requirements (type M, resistance between hose ends R ≤ 100 Ω, guaranteed for hoses up to 40 m in length). Standards and requirements: Chemical hoses: EN 12115:2011. Food industry, contact with food (inner layer): 1935/2004/EC, 2023/2006/EC (GMP), 10/2011/EU (simulant fluids A, B, D2), FDA 21 CFR 177.1520, BfR III. Confirmation of resistance and application conditions requires contact with Tubes International, especially for temperatures above 50°C. Inner layer: white creamy UPE polyethylene. Reinforcement: synthetic cord, steel spiral. Outer layer: black EPDM rubber. Working pressure: 16 bar. Operating temperature: from -40°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible suction and discharge hose with an inner layer made of abrasion and oil-resistant polyurethane, reinforced with a densely arranged steel spiral to increase working pressure and resistance to vacuum. Designed for air, liquids, light chemicals, in pneumatic and hydraulic systems, as well as for the transport of solid substances. The smooth inner surface reduces flow losses and ensures ease of cleaning. The transparent wall allows for visual flow monitoring. Reinforcement with a dense steel wire spiral provides very good resistance to vacuum and hose collapse, as well as a small bending radius. In general industrial applications, it can be used for water, light chemicals, and other fluids based on fats, oils, and hydrocarbons (chemical resistance of polyurethane should be considered) and for air, for vacuum transport of dust, powders, granules, and other abrasive bulk materials (abrasiveness of the medium and potential static electricity issues should be considered). It can be used in the food industry (where American FDA 21 CFR 177.2600 e, f requirements are acceptable) for liquid food substances for hydrated food ("e") and fatty food ("f"). Inner layer: transparent polyurethane. Reinforcement: steel spiral. Outer layer: transparent PVC. Working pressure at 20°C: from 12 bar to 20 bar - depending on the hose diameter. Operating temperature: from -20°C to +90°C. As the operating temperature increases, the working pressure value of the hose decreases.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe Hyperline FX SS RC BLACK hose is a lightweight, flexible Teflon hose, featuring an additional outer layer made of black, antistatic, and flame-retardant EPDM rubber, meeting the requirements for railway vehicles EN 45545. This provides extra protection for the braid and hose against damage and allows for easy cleaning of the hose. Due to its properties, it is recommended for use in the industrial sector and mechanical vehicles. The hose can be supplied without fittings or as complete assemblies ready for installation. Hose material: smooth on the inside, corrugated PTFE (Teflon) on the outside. Reinforcement: single braid of AISI 304 steel with an additional protective layer of EPDM rubber. Working pressure: from 50 bar to 110 bar, depending on the hose diameter. Operating temperature: from -40°C to +140°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose for low-pressure parts of hydraulic power systems, compliant with SAE 100 R6 and ISO 4079 R6 standards. Designed primarily for hydraulic fluids based on mineral oil and some synthetic hydraulic fluids. It can also be used for water-based hydraulic fluids as well as for water and air with a temperature limit of +70°C (air applications may require micro-perforation of the outer layer). Suitable for many liquid products in the petrochemical industry: mineral and synthetic oils, diesel and heating oil, ethylene glycol, and others. Not recommended for gasoline and ester-based oils, unsuitable for aromatic hydrocarbons. Inner layer made of black, smooth synthetic rubber. Reinforcement with textile braid. Outer layer made of black synthetic rubber, resistant to abrasion, oil, ozone, and weather conditions. Inner layer: black synthetic rubber. Reinforcement: single textile braid. Outer layer: black synthetic rubber. Working pressure: from 12 bar to 28 bar - depending on the hose diameter. Operating temperature: from -40°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong and lightweight pressure hose with a thin wall, almost flat in a resting state, designed for operation in harsh conditions. Used for the transmission of industrial water and wastewater, for submersible pumps, drainage and irrigation systems, mobile irrigation. Resistant to abrasion, weather conditions, and ozone. The hose construction allows for easy coiling after use. Installation using straps or clamps. Standard length: 60 m (or 120 m - contact Tubes International). Inner layer: black synthetic rubber. Reinforcement: polyester cord. Outer layer: black synthetic rubber. Working pressure: 10 bar. Operating temperature: from -25°C to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsIndustrial hose designed for washing floors and equipment with hot water in the food, dairy, paper industries, etc. Also suitable for outdoor use. Resistant to weather conditions, ozone, and abrasion. Inner layer: white SBR rubber. Reinforcement: synthetic braid. Outer layer: white SBR rubber. Working pressure: 10 bar. Operating temperature: from -40°C to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-quality rubber pressure hose manufactured in the USA with an inner layer made of chemically resistant polyamide (nylon). The very smooth inner surface reduces flow losses and ensures ease of cleaning. Reinforcement with synthetic textile braiding provides high pressure resistance and low deformation under pressure. The smooth outer layer made of synthetic rubber is resistant to contact with chemicals and oil (RMA Class B – medium resistance). For hoses with an inner diameter of 1/4" and 3/8", the outer layer is antistatic R<106Ω. The hose is intended for industrial applications, particularly for organic solvents and petrochemical substances. The good resistance of polyamide to many solvents allows the hose to be used in the paint industry for the transfer of paints, varnishes, adhesives, and resins. Chemical resistance and potential static electricity issues must always be considered. In particular, antistatic hoses with diameters of 1/4" and 3/8" are widely used as pressure feed hoses for spray guns in automotive workshops, construction, and industry. Chemical resistance verification: chemical resistance table for PA (preliminary selection), confirmation of resistance and application conditions by Tubes International. Installation: smooth fittings with a spigot ("tail" for the hose) without sharp or high ribs that could cut or damage the inner polyamide layer when tightened should be used. Typical hydraulic fittings can be used. The spigot diameter should be precisely matched to the hose diameter to ensure sealing. Installation depending on working pressure with hose clamps, crimp fittings, or for larger diameters with shell clamps. Typical factory hoses for spray guns often have reusable screw fittings. Inner layer: polyamide (PA), silicone-free. Reinforcement: single textile braid for 1/4" and 3/8", double for 1/2". Outer layer: black synthetic rubber. Working pressure: 52 bar. Operating temperature: from -20°C to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible, bendable, and nearly smooth inside hose designed for suction and transport of light materials with abrasive properties, such as dust, powders, granules, grains, flakes, and similar substances under low pressure. The hose is made of polyether-polyurethane and has good resistance to abrasion, ozone, weather conditions, hydrolysis, and biological corrosion. It is suitable for contact with food for the transport of bulk, dry food materials. It complies with European regulations 1935/2004/EC and 10/2011/EU (simulant E), 1895/2005/EC, 2023/2006/EC (GMP), and American FDA 21 CFR 177.2600 "d". It is suitable for temporary contact with food during the transport of dry, bulk, non-fatty food substances - under conditions specified in the manufacturer's declaration of conformity (available from Tubes International). Reinforcement with a hard PVC spiral provides good crush resistance. Used in various industrial applications, particularly in the food and agricultural industry, plastics, construction materials, etc. Versions: standard and antistatic - featuring a copper antistatic wire embedded on the outer side of the hose along the reinforcing spiral. Effective grounding of the wire ensures a sufficient level of electrostatic charge dissipation for many applications. The specified wall thickness of the hose is measured between the spiral. Hose material: transparent polyether-polyurethane. Reinforcement: hard PVC spiral. Operating temperature: from -25°C to +85°C.
