Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / Details90° INTERLOCK SAE 3000 flange end, O-ring seal or other gasket in the flange groove, for hose type 4SH, R13, and R15. Material: carbon steel, galvanization.- Select options This product has multiple variants. The options may be chosen on the product page / Details90° INTERLOCK SAE 6000 flange end, O-ring seal or other gasket in the flange groove, for hose type 4SH, R13, and R15. Material: AISI 316L steel.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° Non-Skive Flare Fitting SAE 3000 (SFL 90), lightweight series, designed for crimping in hoses type 4SP, 4SH, R13, and R15 using TI-N crimping sleeve... Installation: without cutting the hose rubber. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° NON SKIVE SUPERCAT flange end (SFC 90), designed for crimping in hoses type 4SP, 4SH, R13, and R15 using TI-N crimping sleeve... Installation: without cutting the hose rubber. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° TRICLOVER flange end with a smooth "tail" for rubber and plastic hoses, as well as rubber hoses with a layer of UPE, PTFE, FEP, MFA, PFA. For use in the pharmaceutical, biotechnology, cosmetic, food, and chemical industries, for liquid and high-viscosity media. The working pressure depends on the size of the connection and the type of clamp used (at least 16 bar for size 2", 10 bar for sizes above 2"). Installation: TI-LR, TI-LDR clamp sleeves or using RS shell clamp. Material: AISI 316 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight non-skive flange end SAE 3000 (SFL), lightweight series, intended for crimping in hoses type 4SP, 4SH, R13, and R15 using crimping sleeve TI-N... Installation: without cutting the hose rubber. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight non-skive collar end SUPER CAT (SFC), designed for crimping in hoses type 4SP, 4SH, R13, and R15 using crimping sleeve TI-N... . Installation: without cutting the hose rubber. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSAE 6000 flange end (SFL), 45° angled, heavy series. Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the hose type. Surface coated with zinc-nickel with a layer thickness of 6-10 µm, which exhibits very high corrosion resistance (up to 720 hours without corrosion in a salt spray chamber). Material: carbon steel, zinc-nickel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSAE 6000 flange end (SFL), 90° angled, heavy series. Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the hose type. Material: AISI 316L steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSAE 6000 flange end (SFL), 90° angled, heavy series. Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the hose type. Surface coated with zinc-nickel with a layer thickness of 6-10 µm, characterized by very high corrosion resistance (up to 720 hours without corrosion in a salt spray chamber). Material: carbon steel, zinc-nickel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSAE 6000 SUPERCAT (SFS) flange end, 90° angle. Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the type of hose. Surface coated with zinc-nickel with a layer thickness of 6-10 µm, which exhibits very high corrosion resistance (up to 720 hours without corrosion in a salt spray chamber). Material: carbon steel, zinc-nickel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSAE 6000 collar end (SFL), heavy series. Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the type of hose. Material: AISI 316L steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSAE 6000 flange end (SFL), heavy series. Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the hose type. Surface coated with zinc-nickel with a layer thickness of 6-10 µm, characterized by very high corrosion resistance (up to 720 hours without corrosion in a salt spray chamber). Material: carbon steel, zinc-nickel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsNiTO hose end made of AISI 316L stainless steel with external thread. Available in two sizes: 1/2″ and 3/4″. Used in conditions with high hygiene and corrosion resistance requirements (e.g., food industry, hospitals). Material: AISI 316L steel. Working pressure: up to 25 bar. Operating temperature: from -20°C to +150°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsRotary end AK with external BSPT tapered thread without flange. Designed for installation in industrial hoses, particularly in washing hoses at the connection point with the water gun, where rotation of the gun is required due to its operation. Material: AISI 316 steel. Working pressure: up to 40 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsRotary end AK with external BSPT tapered thread without anti-kink spring. Designed for installation in industrial hoses, particularly in washing hoses at the connection point with the water gun, where rotation of the gun is required due to its operation. Material: AISI 316 steel. Working pressure: up to 40 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsScrewed end fitting type S3 with external NPT thread (seal on the thread), made according to standard EN 14424, intended for rubber hoses and certain types of thermoplastic hoses, with soft textile reinforcement (without wire spiral). Commonly used in the fuel sector in fuel and gas distribution lines (e.g., LPG). Basic version made entirely of brass; also available in a stainless steel version (end fitting) with a chrome-plated brass sleeve. Material: brass (B). Working pressure: 16 bar (up to 25 bar for DN25). Operating temperature: from -20°C to +65°C (from -30°C to +70°C - for LPG).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight end fitting for hose with BSP thread series 1D type EM, widely used in laboratories, medicine, pharmaceutical, chemical, and food industries. It is designed for flexible PFA hoses, which require thermal expansion of the ends for installation (so-called flared connection). This solution guarantees no particle deposition, accumulation of bacteria, and elimination of medium leakage. Material: PFA, PVDF. Working pressure: 10 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight end fitting for hose with BSP GW type EM, widely used in laboratories, medicine (e.g., dialysis devices), pharmaceutical, chemical, and food industries. It features an integrated sleeve, and hose locking occurs via a clamping ring located inside the knurled nut. Due to its flexibility, the clamping ring can be used multiple times in the same connection. It is designed for flexible, smooth-walled, unreinforced hoses made of PVC, PA, PUR, PTFE, FKM, silicone, and TYGON® hoses. Other sizes and diameters of fittings and couplings are available. Material: polypropylene, PVDF. Working pressure: 10 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight end fitting for hose with BSP thread series 1C type EM, widely used in laboratories, medicine, pharmaceutical, chemical, and food industries. Installation is done by pushing the hose onto the integrated connecting sleeve. Locking occurs via a locking ring made of PEEK and a knurled nut. Sealing is provided by a sealing ring made of PTFE. Designed for smooth-walled unreinforced hoses and tubes made of harder materials such as PTFE, PFA, FEP, PA, PE. Other sizes and diameters of fittings and couplings are available. Material: polypropylene, PVDF. Working pressure: 10 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight end fitting for hose with BSP GW series 2N type EM, widely used in laboratories, medicine, pharmaceutical, chemical, and food industries. Designed for rigid hoses and tubes made of fluoropolymers PTFE, FEP, PFA, glass tubes, metal, polyamide (PA), and tubes made of polyethylene (PE). Hose/tube locking in the fitting occurs via a locking ring and nut. Sealing of the connection is ensured by a PTFE ring. This solution eliminates cross-sectional reductions in the hose, which consequently does not affect the flow of media. Other sizes and diameters of fittings and couplings are available. Material: polypropylene, PVDF. Working pressure: 10 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight end fitting for hose with GZ BSP type EM, widely used in laboratories, medicine (e.g., dialysis devices), pharmaceutical, chemical, and food industries. It features an integrated sleeve for easy installation, and hose locking occurs via a clamping ring located inside the knurled nut. Due to its flexibility, the clamping ring can be reused multiple times in the same connection. It is designed for flexible, smooth-walled, unreinforced hoses made of PVC, PA, PUR, PTFE, FKM, silicone, and TYGON® hoses. Other sizes and diameters of fittings and couplings are available. Material: polypropylene, PVDF. Working pressure: 10 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight end for hose with GZ BSP series 1B type EM, widely used in laboratories, medicine, pharmaceutical, chemical, and food industries. Installation occurs by pushing the hose onto the integrated connecting sleeve, and locking is achieved using a knurled nut that clamps the flexible hose onto the connecting sleeve. Multiple installations are possible. It is designed for flexible hoses made of materials (PVC, silicone) reinforced with a specific wall thickness braid. The end withstands short pressure spikes up to 30 bar at a temperature of +20°C. Other sizes and diameters of ends and couplings are available. Material: polypropylene, PVDF. Working pressure: 10 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight end for hose with GZ BSP series 1C type EM, finds wide application in laboratories, medicine, pharmaceutical, chemical, and food industries. Installation is done by pushing the hose onto the integrated connecting sleeve. Locking occurs via a locking ring made of PEEK and a knurled nut. Sealing is provided by a sealing ring made of PTFE. It is intended for smooth-walled unreinforced hoses and tubes made from harder materials such as PTFE, PFA, FEP, PA, PE. Other sizes and diameters of ends and couplings are available. Material: polypropylene, PVDF. Working pressure: 10 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight end for hose with GZ BSP series 1D type EM, finds wide application in laboratories, medicine, pharmaceutical, chemical, and food industries. It is designed for flexible PFA hoses, which require thermal expansion of the ends for installation (so-called flared connection). This solution guarantees no particle deposition, accumulation of bacteria, and elimination of medium leakage. Material: polypropylene, PVDF. Working pressure: 10 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight end fitting for hose with GZ BSP series 2N type EM, finds wide application in laboratories, medicine, pharmaceutical, chemical, and food industries. It is designed for rigid hoses and tubes made of fluoropolymers PTFE, FEP, PFA, glass tubes, metal, polyamide (PA), and tubes made of polyethylene (PE). Hose/tube locking in the fitting occurs via a locking ring and nut. Sealing of the connection is ensured by a PTFE ring. This solution eliminates cross-sectional reductions in the hose, which consequently does not affect the flow of media. Other sizes and diameters of fittings and couplings are available. Material: polypropylene, PVDF. Working pressure: 10 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight INTERLOCK end with internal metric thread, 24° cone with O-ring, heavy series, for hose type 4SH, R13, and R15. Material: AISI 316L steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight INTERLOCK end with external BSP thread, 60° cone, for hose type 4SH, R13, and R15. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight JIC INTERLOCK fitting with external NPTF thread, 60° cone, for hose types 4SH, R13, and R15. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight JIC INTERLOCK fitting with internal UNF thread, 74° cone with O-ring, for hose type 4SH, R13, and R15. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight JIC INTERLOCK fitting with external UNF thread, 74° cone, for hose type 4SH, R13, and R15. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight NON SKIVE end fitting with external UNF thread, featuring a seal on a 74° cone (AGJ), designed for crimping in hoses type 4SP, 4SH, R13, and R15 using crimping sleeve TI-N... . Installation: without cutting the hose rubber. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight NON SKIVE end fitting with external UNF thread, featuring flat sealing (AGO), designed for crimping in hoses type 4SP, 4SH, R13, and R15 using TI-N crimping sleeve. Assembly: without cutting the hose rubber. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight NON SKIVE end with internal UNF thread, with sealing on a 74° cone (DKJ), intended for crimping in hoses type 4SP, 4SH, R13, and R15 using crimping sleeve TI-N... . Installation: without cutting the hose rubber. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight NON SKIVE end fitting with internal UNF thread, featuring flat sealing (DKO), designed for crimping in hoses type 4SP, 4SH, R13, and R15 using crimping sleeve TI-N... . Installation: without cutting the hose rubber. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight end TRI-CLAMP with BSP thread series 3C type EM, finds wide application in laboratories, medicine, pharmaceutical, chemical, and food industries. The Tri-Clamp (Triclover) end is manufactured according to DIN 32676, ISO 2852, and BS 4825 standards and is finished with an internal BSP thread. Supplied without a gasket, which must be ordered separately depending on the medium. Gaskets are available made from EPDM, FKM, Gylon®, and PTFE materials. Material: polypropylene, PVDF. Working pressure: 6 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight end TRI-CLAMP with GZ BSP series 3C type EM finds wide application in laboratories, medicine, pharmaceutical, chemical, and food industries. The Tri-Clamp (Triclover) end is manufactured according to DIN 32676, ISO 2852, and BS 4825 standards and is finished with an external BSP thread. Supplied without a gasket, which must be ordered separately depending on the medium. Gaskets are available made from EPDM, FKM, Gylon®, and PTFE materials. Material: polypropylene, PVDF. Working pressure: 6 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight fitting with throttle valve for thermoplastic hose FR 5 DN2 (1/12"), with internal UNF thread, SAE type, 45° cone. Fitting material: brass. Sleeve material: brass.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight fitting with a sleeve for thermoplastic hose FR 5 DN2 (1/12"), with internal UNF thread, SAE type, 45° cone. Fitting material: brass. Sleeve material: brass.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight fitting with sleeve for thermoplastic hose FR 5 DN4 (5/32"), with internal UNF thread, SAE type, 45° cone. Fitting material: carbon steel, galvanized. Sleeve material: aluminum.
