Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery strong and thick, flexible hose intended for extraction and conveying abrasive bulk materials, granulates, sand, gravel, pebbles, substrate agricultural. used for loading and emptying silos, vehicles and excavators suction, handling with tankers etc. thick wall and fairly dense spiral reinforcing ensures high resistance to pressure and vacuum. smooth inside, non-compressible, fairly pliable (r=2.5xD), flexible also in low temperatures. hose o sound resistance to abrasion, resistant also on oils and gasoline. Assembly on connectors with bridge clamps (prawo-handed) or assembly special on ends industrial e.g. flange. Other diameters may be available on special order. versions: P3 SV PU – with polyester – polyurethane, very resistant to abrasion; P3 SV PU AE - version with polyether – polyurethane, resistant to abrasion, resistant to microbes and hydrolysis, compliant with the European requirements 1935/2004/EC and 10/2011/EU (simulant E), 2023/2006/EC (GMP) and American FDA 21 CFR 177.2600 and 178.2010. is suitable for time contact with food at conveying dry, bulk, free of fat on surface, substances food - on conditions defined in declaration conformity the manufacturer (Available in Tubes International). Hose material: transparent polyester-polyurethane (P3 SV PU), polyether – polyurethane (P3 SV PU AE). Wall thickness measured between the spiral: 2.5 mm. Reinforcement: spiral with wire steel. Operating temperature: od -40°C up to +100°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible hose suction intended for sewage and water. externally Serrated, almost smooth in center. special profile makes, that hose is resistant to vacuum and creasing, (returns for its shape). as hose with polyethylene has very good resistance chemical and resistance to corrosion biological (rotting, rotting). is flexible in low temperatures. hose is commonly used for emptying septic tanks and portable toilets, in construction, facilities tourist, in marinas and on airports. Hose material: yellow profile polyethylene (PE). Reinforcement: black profile polyethylene (PE). Vacuum: 0.95 bar (for diameter 51mm ÷ 76 mm); 0.85 bar (for diameter 102 mm). Operating temperature: od -40°C up to +60°C.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong hose suction-delivery intended for greasy and non-greasy substances food, requiring the use of rubber free of odour and taste. Contains no plasticisers, phthalates or substances of animal origin. especially recommended for handling and heavy conditions use. widely used in industry food in dairies and oil mills. Layer inner made with NBR resistant is on standard used in industry food agents and processes cleaning. Layer outer resistant to momentary contact with fats animal and vegetable, abrasion and conditions atmospheric. standards and requirements : 1) general: EC 2002/95 (RoHS), EC 1907/2006 (REACH). 2) industry food, contact with food: EC 1935/2004, EC 2023/2006 (GMP). Layer inner compliant with D.M. 21/03/73, FDA 21 CFR 177.2600, BfR, 3A Sanitary Standards. RAL (German institute ensuring quality and certification). Vacuum: 0.9 bar. Inner layer: white NBR rubber. Reinforcement: cord synthetic, steel spiral. Outer layer: blue rubber CR. Working pressure: 10 bar. Operating temperature: from -20°C to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, exceptionally flexible and compressible hose intended for air conditioning, discharge and air blowing air, extraction fumes welding. Widely used for arms ducting, ventilation, heating tents, drying the structure construction. self-extinguishing and non-flammable (non-spreading flame) in accordance with UL94 V-0. resistant to hydrolysis and microbes. Other diameters are available on special order in the scope 30 ÷ 800 mm and color: black, blue, white and yellow. Assembly of the hose on connectors with bridge clamps (prawo-handed). Hose material: fabric polyester impregnated grey PVC. Wall thickness: 0.4 mm. Reinforcement: spiral with wire steel. Operating temperature: od -30°C up to +80°C (momentarily up to +100°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, very pliable and flexible hose intended for extraction hot vapours, fumes, gases, air blowing and discharge air cooling. reinforced version hose NEOPRENE 1, o two layers fabric impregnated neoprene and spiral steel placed between layers. resistant chemical, on radiation UV and aging. used m.in. for hot air in dryers granulate and blow-moulding machines film in processing plastics, in dryers paints in printing houses, other dryers industrial, in industry electronic, in vehicles and engines for air cooling, incineration plants, a also for extraction exhaust gases and gases welding. smooth inside (in state extended), o small radius bending enabling easy installations in tight spaces equipment and vehicles. Assembly with clamps. Other diameters are available on special order. Hose material: two fabric glass impregnated black rubber CR (neoprene® - rubber chloroprene). Reinforcement: spiral with wire steel, on outside two cable with fibre glass. Operating temperature: od -35°C up to +135°C (momentarily up to +150°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsIntended for installation sanitary, cold and hot water, water pool, sea, drinking. Nie is suitable for oils mineral, water cooling of agents anti-corrosion containing oil, oily air and for installation where fixed pressure working exceeds 10 bar. Marked na bellows single red point. Inner layer: butyl rubber (IIR) / EPDM. Reinforcement: nylon cord. Outer layer: rubber EPDM. Flanges: galvanized carbon steel. Operating temperature: from -40°C to +90°C (momentarily +120°C depending on medium).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery Light, flexible, having resistance to creasing hose intended for discharge air, fumes, dusts fibres, dust and other light substances. used in vacuum cleaners industrial. made with conductive polyethylene (PE) and elastomer, o low resistance material, excellent for applications in which required is avoiding accumulation charges electric (should then effectively earth hose). shaped in profile hose outer spiral reinforcing, left-handed, allows screwing on appropriate ends for vacuum cleaners with a left-hand thread e.g. ends plastic for hose EVA: DN32, 38 and 50 or appropriate ends conductive. Assembly of the hose with clamps on suitable ends, pipe spigots etc. is also possible. hose o diameter DN38 and DN50 has declaration conformity with requirements ATEX and standards TRGS 727 and It can be used in zones hazard explosion, under a condition effective earthing hose and carrying out through user analysis risk. Hose material: black special polyethylene (PE) and elastomer. Reinforcement: spiral reinforcing shaped in material hose. Operating temperature: od -20°C up to +60°C (podworking pressure depends on temperature).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA rubber bellows for a compensator, intended for work in installations in which the medium consists of mineral oils, vegetable and animal fats, oils in aerosol, water with the addition of anti-corrosion substances. Inner layer: rubber NBR. Reinforcement: nylon cord. Outer layer: rubber CR. Operating temperature: from -30°C to +90°C (depending on medium).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery light, very flexible and pliable hose intended for discharge aggressive vapours chemical and gases, ventilation and air conditioning. good resistance chemical on solvents and other aggressive vapours. Checking chemical resistance - the chemical resistance table for polyethylene (preliminary selection), confirmation of resistance and conditions of use - by Tubes International. resistant to hydrolysis and corrosion biological. Contains no halogen compounds or plasticisers. used mainly in industry chemical. on request available diameter in the scope 40 ÷ 610 mm. hose available in two versions: P2PE - standard and P2PE EL - conductive electrically o resistance R ≤10 4 Ω, compliant with the directive ATEX 2014/34/EU and the standard TRGS 727, made with black polyethylene. Hose material: polyethylene (PE), transparent - version standard P2PE, black - version conductive electrically P2PEEL. Wall thickness: 0.4 mm. Reinforcement: spiral with wire steel. Operating temperature: od -40°C up to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible hose medium wall thickness intended for extraction and conveying powders, grains, light granulates and other bulk materials. intended for use in industry food and pharmaceutical. used m.in. for milk in powder, grain, rice, coffee, tea, flour (version PAS). pliable, fairly compressible, almost smooth inside, flexible also in low temperatures. O sound resistance to abrasion, resistant to microbes and hydrolysis. non-toxic, Contains no halogen compounds or plasticisers. Resistant to oils and petrol. Assembly on connectors with bridge clamps (prawo-handed). Other diameters may be available on special order. hose Available is in following versions: P7 OL PU FOOD – spiral with wire steel (copper-plated); P7 L PU PAS FOOD – spiral of steel stainless, Material hose permanently antistatic (R ≤10 8 Ω, in accordance with TRGS 727). hoses P7 OL PU FOOD and P7 L PU PAS FOOD are compliant with requirements European 1935/2004/EC and 10/2011/EU (simulant E), 2023/2006/EC (GMP) and American FDA 21 CFR 177.2600 and 178.2010. are suitable for time contact with food at conveying dry, bulk, free of fat on surface, substances food - on conditions defined in declaration conformity the manufacturer (Available in Tubes International). Hose material: transparent polyether-polyurethane. Wall thickness measured between the spiral: 0.7 mm. Reinforcement: spiral with wire steel (P7 OL PU FOOD), spiral with wire of steel stainless AISI 301 (P7 L PU PAS FOOD). Operating temperature: od -40°C up to +100°C (momentarily for + 125°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrength, light and very flexible (also in low temperatures) hose suction-delivery designed specially for industry wine for heavier conditions use. strong than hose SPIRABEL ® SNTS, o thicker wall. hose for demanding applications, intended for conveying water, beer, good win and alcohols with a concentration up to 50% and temperature up to +40°C, juices, drinks and other products food. Not contains phthalates, co allows use go also for milk and its dairy products. not recommended for oils and greasy substances food. Reinforcement spiral with hard PVC, resistant on impact, ensures very good strength on vacuum and kinking hose. transparent wall allows on easy control visual movement substances. smooth surface inner reduces losses flow and ensures ease cleaning. ease cleaning, ensures also smooth surface outer, which available in hoses for diameter 63 mm. W use not regarding direct contact with food (in industry, construction, agriculture) It can be used: 1) for light chemicals, water, sludge and sewage, other liquids (without fat, oils and hydrocarbons); 2) for air, vacuum conveying dusts, powders, granulates and other lightly abrasive substances bulk (not greasy). In that case the abrasiveness and the possible problem of static electricity must be taken into account. as hose reinforced spiral with hardened PVC (without braid) is characterized a certain elongation under pressure, co should take into account in use, especially in temperatures above +40°C. Standards and requirements: Food industry, food contact: compliant with the European requirements 1935/2004/EC and 10/2011/EU (simulant fluids A, B, C and D1), 2023/2006/EC (GMP). Hose material: transparent PVC. Reinforcement: spiral with hardened PVC. Working pressure: from 5 bar to 7 bar, depending on the diameter hose. Operating temperature: -25°C up to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery light and flexible hose intended for discharge air, dust, dusts, fine sawdust and chips, very light bulk materials etc. Dla all types industry, in particular often used for dedusting and discharge fine particles solid in industry wood, furniture, ceramic, plastics. very pliable and very compressible axially, flexible also in low temperatures. O sound resistance to abrasion, resistant also on microbes and hydrolysis. Not toxic, Contains no halogen compounds or plasticisers. Resistant to oils and petrol. hose marked is an arrow indicating correct direction flow medium. The hose wall thickness is measured between the spiral. Assembly on connectors with bridge clamps (prawo-handed). Other diameters may be available on special order. hose Available is in following versions: ECO – version standard, ECO SE – version with material flame-retardant (without classification flame retardancy), ECO AS – version permanently antistatic (ISO 8031: R 9 Ω, TRGS 727 (6.4.2.4): R 8 Ωm, directive 2014/34/EU (ATEX): It can be used in defined zones hazard explosion po analysis risk, ECO SE AS – version antistatic and flame-retardant (Available on special order). hose ECO produced is in process production compliant with with policy sustainable growth in which uses raw materials originating with recycling pure waste with process production, energy renewable, closed circulation water and other innovation. Hose material: transparent polyether-polyurethane. Reinforcement: spiral with wire steel. Wall thickness measured between the spiral: 0.4 mm. Operating temperature: od -40°C up to +100°C (momentarily for + 125°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose suction-delivery for demanding, versatile applications in industry food. excellent for conveying many types products food such as: olive oil, wine, beer, juices fruit, milk, fats and alcohols with a concentration up to 96%. The inner layer is free of phthalates, plasticisers and components of animal origin. Contains no phthalates or bisphenol A and no polycyclic aromatic hydrocarbons (PAH Free), in accordance with ZEK 01.4-08 Cat.1. Tested for the presence of heavy metals. Layer outer resistant to conditions atmospheric and ozone. thanks to external corrugation hose is exceptionally pliable and flexible. recommended way mounting with fitting are special clamp shell EASY SHELL, o shape adapted for serrated hose. standards and requirements : industry food, contact with food 1935/2004/EC and EC 2023/2006/EC (GMP). Layer inner compliant with FDA 21 CFR 177.2600, BfR XXI kat. 2, D.M. 21/03/73, 3-A Sanitary Standard 18-03 class II. Inner layer: white, smooth synthetic rubber. Reinforcement: cord synthetic, spirals steel. Outer layer: blue synthetic rubber. Working pressure: 10 bar. Vacuum: 0.6 bar. Operating temperature: from -30°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, single-layer, very pliable and flexible hose intended for extraction hot vapours, fumes, gases, air blowing and discharge air cooling. resistant chemical, on radiation UV and aging. used m.in. for hot air in dryers granulate and blow-moulding machines film in processing plastics, in dryers paints in printing houses, other dryers industrial, in industry electronic, in vehicles and engines for air cooling, incineration plants, a also for extraction exhaust gases and gases welding. smooth inside (in state extended), o very small radius bends enabling easy installations in tight spaces equipment and vehicles. Assembly with clamps. Other diameters are available on special order. Hose material: fabric glass impregnated black rubber CR (neoprene® - rubber chloroprene). Reinforcement: inner spiral with wire steel, outer cable with fibre glass. Operating temperature: od -35°C up to +135°C (momentarily up to +150°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrength, light and flexible hose suction-delivery designed specially for industry wine for heavier conditions use. strong than hose LUISIANA, o thicker wall. hose for demanding applications. intended for conveying water, beer, good win and alcohols with a concentration up to 20%, juices, drinks and other products food. Not contains phthalates. not recommended for milk and its dairy products, oils and greasy substances food. Reinforcement spiral with hard PVC, resistant on impact, ensures very good strength on vacuum and kinking hose. transparent wall allows on easy visual control of the flow. A smooth inner surface reduces flow losses and ensures ease of cleaning. W use not regarding direct contact with food (in industry, construction, agriculture) It can be used: 1) for light chemicals, water, sludge and sewage, other liquids (without fat, oils and hydrocarbons); 2) for air, vacuum conveying dusts, powders, granulates and other lightly abrasive substances bulk (not greasy). In that case the abrasiveness and the possible problem of static electricity must be taken into account. standards and requirements : industry food, contact with food - compliant with the European requirements 1935/2004/EC and 10/2011/EU (simulant fluids A, B and C), 2023/2006/EC (GMP). Hose material: transparent PVC. Reinforcement: rigid-PVC spiral. Operating temperature: from -5°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose intended for discharge dusts, sawdust, chips in industry wood and furniture. designed for machine CNC for machining wood and plastics: centres machining, milling machines vertical, plotters milling. thick steel spiral coated white PVC is resistant to corrosion, has good adhesion for material hose and ensures high parameters pressure. despite strong the structure, thanks to optimal matched large surge spiral is very flexible, pliable and compressible. especially recommended for extraction dust and chips from under quickly moving heads working (CNC Router Dust Collection System). resistant to microbes, hydrolysis and oils and gasoline. Contains no halogen compounds or plasticisers. flame-retardant, compliant with the standard German DIN 4102 Class B1. hose can treat as conductive electrically po made earthing spiral, in accordance with German recommendations industrial BGI 739-2. Assembly on connectors with bridge clamps (prawo-handed). Other diameters are available on special order in the scope 80 ÷ 600 mm. Hose material: transparent polyether-polyurethane. Reinforcement: spiral with wire steel coated white PVC. Operating temperature: od -40°C up to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, very flexible hose suction-delivery intended for systems exhaust cooled water engines diesel boats motor and yachts (free discharge mixed exhaust gases and water cooling). used in short sections between pipes installation. Layer inner resistant to exhaust gases. Layer outer resistant to fire and conditions atmospheric. has resistance to vacuum. compliant with certificate type Lloyds 99/00169 (E4), approved VTT in accordance with Nordic Boat Standard MC9. Inner layer: black synthetic rubber CR. Reinforcement: cord synthetic, steel spiral. Outer layer: black, corrugated synthetic rubber CR. pressure bursting: ≥ 2 bar. Operating temperature: od -30°C up to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, exceptionally flexible and pliable hose o sound resistance chemical and on radiation UV. resistant to hydrolysis and corrosion biological. Contains no halogen compounds or plasticisers. intended for discharge air, vapours and gases. used in industry chemical and in systems ventilation and air conditioning in vehicles. available other diameter in the scope 30 ÷ 610 mm. Checking chemical resistance - the chemical resistance table for polypropylene (preliminary selection), confirmation of resistance and conditions of use - by Tubes International. Hose material: black soft polypropylene (PP). Wall thickness: 0.4 mm. Reinforcement: spiral with wire steel. Operating temperature: od -20°C up to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSuction-delivery hose intended for conveying many light products alcoholic such as: beer, wine, cider and drinks non-alcoholic. The inner layer is free of phthalates, plasticisers and components of animal origin, co eliminates risk contamination medium and growth bacteria. Layer outer resistant to abrasion, o sound resistance to aging. standards and requirements : 1) general EU 2015/863 (RoHS 3), EC 1907/2006 (REACH). 2) industry food, contact with food 1935/2004/EC, 2023/2006/EC (GMP). Layer inner compliant with FDA 21 CFR 177.2600, D.M. 21/03/73. Inner layer: white rubber bromobutyl (BIIR). Reinforcement: cord synthetic, steel spiral. Outer layer: red EPDM rubber. Working pressure: 10 bar. Vacuum: 0.9 bar. Operating temperature: -40°C up to +120°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, very flexible hose intended for discharge dusts, sawdust, chips, light bulk materials o properties abrasive. used in industry wood, construction, food. resistant to ozone. Wall thickness measured between the spiral. available other diameter in the scope 20 ÷ 600 mm. Hose material: transparent polyurethane. Reinforcement: copper-plated (version L/R) or galvanized (version L) spiral with wire steel. Operating temperature: od -40°C up to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight hose suction-delivery intended for handling milk and its products and substances food, requiring the use of rubber free of odour and taste. Not contains phthalates, plasticisers and products origin animal. Layer inner resistant to standard used in industry food agents and processes cleaning. special The design hose „CRUSH PROOF” allows return hose under pressure for primary shape po accidental running over go e.g. truck forklift. hose is light and easy for handling. especially recommended for applications demanding small radius bends. retains its flexibility even in low temperatures. standards and requirements : 1) general: EC 2002/95 (RoHS), EC 1907/2006 (REACH). 2) industry food, contact with food: EC 1935/2004, EC 2023/2006 (GMP). Layer inner compliant with D.M. 21/03/73, FDA 21 CFR 177.2600, BfR, RAL (German institute ensuring quality and certification). Inner layer: white, smooth rubber NR/NBR. Reinforcement: cord synthetic, spiral plastic. Outer layer: blue synthetic rubber. Working pressure: 6 bar. Operating temperature: from -30°C to +85°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, very flexible and pliable hose intended for discharge vapours paints, solvents, contaminants air and dusts in spaces hazardous explosion. used also for conveying air in plants biogas. permanently antistatic (R ≤10 8 Ω), compliant with the standard technical TRGS 727 and the standard TRAS120 for plants biogas. resistant to hydrolysis and corrosion biological. retains flexibility in low temperatures, flame-retardant - Meets the requirements of standards DIN 4102 B1 regarding properties fire materials construction. On special order available also other diameter in the scope 20 ÷ 800 mm. Checking chemical resistance - the chemical resistance table for PCV (preliminary selection), confirmation of resistance and conditions of use - by Tubes International. Hose material: fabric polyester impregnated black PVC. Wall thickness: 0.4 mm. Reinforcement: spiral with wire steel. Operating temperature: od -40°C up to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong, flexible, resistant to kinking hose suction - delivery o black serrated layer outer, designed for conveying hot, dry air of compressor for installation bowl tankers. ideal in cases when required is small radius bends. used in tankers road for transport bulk materials: cement trucks, feed trucks etc. and in other installations industrial. Layer outer resistant to ozone and conditions atmospheric. Dla diameter 90 mm Available in sections 2 m with soft, free of spiral ends. Inner layer: white rubber EPR. Reinforcement: a synthetic braid, steel spiral. Outer layer: black corrugated EPDM rubber. Working pressure: up to 10 bar. Operating temperature: od -40°C up to +200°C (momentarily up to +240°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, very flexible and pliable, resistant chemical and flame-retardant hose intended for applications in systems air conditioning, ventilation and heating. Do extraction and conveying hot air, aggressive chemical vapours, exhaust gases and gases in systems ventilation and heating. has resistance to UV, ozone and conditions atmospheric. used in equipment vehicles, engines and in industry chemical. is characterized high compressibility - for 1:6, strong design resistant on vibration and stretching, resistance on impacts thanks to outer spiral. Also available with a stainless steel spiral (from 80 mm diameter). Assembly of the hose on connectors with bridge clamps (lewo-handed). Checking chemical resistance - the chemical resistance table for CSM (preliminary selection), confirmation of resistance and conditions of use - by Tubes International. length standard: od 2 for 10 m. Hose material: externally black fabric polyester coated CSM - Hypalon. Reinforcement: outer spiral with wire and sheet steel galvanized. Operating temperature: od -35°C up to +175°C (momentarily up to +190°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA strong suction-delivery hose intended for conveying dry abrasive substances. Layer inner smooth, antistatic, very resistant to abrasion (50±5 mm 3 acc. to ISO 4649, formerly DIN 53516). A built-in copper wire which, after earthing (or connection to an earthed end), discharges electric charges. Layer outer resistant to conditions atmospheric and ozone. hose intended for conveying dry strong abrasive substances: cement, sand, gravel etc. Inner layer: black rubber NR/SBR. Reinforcement: cord synthetic, steel spiral. Outer layer: black EPDM rubber. Working pressure: 6 bar. Vacuum: from 0.8 bar to 0.9 bar - depending on the diameter hose. Operating temperature: -30°C up to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible and smooth inside hose with white spiral, intended for discharge dusts, chips, fibres and light bulk materials in industry paper, textile, wood. its flexibility and flexible, retains also in low temperatures. dense steel spiral coated white PVC ensures high parameters pressure, is resistant to corrosion and has good adhesion for material hose. hose o sound resistance to abrasion, oils and gasoline. Assembly on connectors with bridge clamps (prawo-handed). Other diameters available on order. versions: P1 N PU – standard o high resistance to abrasion; P1 N PU AS – antistatic (R ≤ 10 8 Ω), compliant with TRBS 2153 and for extraction also with TRGS 727, resistant to microbes and hydrolysis; P1 N PU EL – conductive electrically (R ≤ 10 4 Ω), compliant with ATEX 2014/34/EU, TRBS 2153 and for extraction also with TRGS 727, can be used in zones hazard explosion (po carrying out analysis risk). Hose material: transparent polyester-polyurethane (P1 N PU), transparent polyether-polyurethane (P1 N PU AS), black polyether-polyurethane (P1 N PU EL). Reinforcement: spiral with wire steel coated PVC. Wall thickness measured between the spiral: 0.5 mm and 0.6 mm od diameters 100 mm. Operating temperature: od -40°C up to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery strong, thick hose suction - delivery intended for conveying wide range wet and dry substances abrasive. thick Layer inner smooth, antistatic, resistant to abrasion (70 mm 3 acc. to ISO 4649, formerly DIN 53516). A built-in copper wire which, after earthing (or connection to an earthed end), discharges electric charges. Layer outer corrugated, resistant to conditions atmospheric and ozone. hose intended is for conveying substances abrasive mixed with water and dry: cement, sand, gravel, seeds etc. appropriate for use in heavy conditions - „Heavy Duty”. can be bent on relatively small radius bends, whereas its deflection requires considerable force. can be also easily cut on sections directly on space use and mounted of special fittings flanged PN10 (fitted on external surface hose). used in many use, e.g. for handling substances bulk in ports, for transport cuttings in mining, in industry chemical, in construction at works demolition, for suction and conveying water and sludge in works at dewatering, in gravel pits and sand plants, in works dredging and dredging. assembly: hose intended for mounting system VOLGA FRA – aluminum half-flanges PN10 applied externally on hose. Inner layer: black rubber NR/SBR. Reinforcement: cord synthetic, steel spiral. Outer layer: black EPDM rubber. Working pressure: 10 bar. Vacuum: 0.9 bar. Operating temperature: od -40°C up to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, in color grey, very flexible and pliable, resistant chemical and flame-retardant hose intended for applications in systems air conditioning, ventilation and heating. is characterized high compressibility - for 1:6, strong design resistant on vibration and stretching, resistance on impacts thanks to outer spiral. Available also in other colors and of spiral of steel stainless (od diameter 80 mm). version AS – antistatic (R ≤10 9 Ω) - made in color black. Assembly of the hose on connectors with bridge clamps (lewo-handed). checking resistance chemical: table resistance chemical PVC (selection initial), confirmation resistance and conditions use through Tubes International. Standard length: from 2 to 10 m - contact Tubes International. Hose material: grey fabric polyester impregnated PVC. Reinforcement: outer spiral with wire and sheet steel galvanized. Operating temperature: od -20°C up to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong hose suction-delivery intended for conveying dry or liquid substances abrasive, granulates etc. externally Serrated, inside smooth. Layer inner with transparent, resistant to abrasion polyurethane, o wall thickness od 0.6 mm (DN30) for 1 mm (DN100). The hose has a copper wire arranged along the spiral which, after earthing or connection to an end, discharges electric charges. Widely used in processing plastics in use demanding greater resistance to abrasion, puncturing and cutting hose. especially recommended for regrind plastics o relatively sharp edges. Standards and requirements: Food industry, food contact: compliant with the European requirements 1935/2004/EC and 10/2011/EU (simulant fluids A, B and C), 2023/2006/EC (GMP) – refers to liquid substances food. Inner layer: transparent polyurethane. Outer layer: transparent PVC. Reinforcement: rigid-PVC spiral. Working pressure: from 3 bar to 5 bar, depending on the diameter hose and temperatures. Vacuum: for 0.7 bar. Operating temperature: -10°C up to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, pliable and flexible hose intended for extraction hot vapours, fumes, gases, dusts, discharge air cooling and air blowing. flame-retardant, resistant to temperature, radiation UV, ozone and aging. used we all fields industry for applications high-temperature, m.in. for extraction with furnaces in industry metallurgical, foundry, industry glass and ceramic. is characterized high compressibility, strong design resistant on vibration and stretching, resistance on impacts thanks to outer spiral. Other diameters are available on special order in the scope 50 ÷ 508 mm. Assembly of the hose on connectors with bridge clamps (lewo-handed). length standard: 3 m (on special order also sections 6 and 10 m). Hose material: fabric glass impregnated silicone (silver-grey), o wall thickness 0.4 mm. Reinforcement: outer spiral with wire and sheet steel galvanized. Operating temperature: od -60°C up to +300°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsRectangularly Serrated hose reinforced spiral steel, for hot water and liquids anti-freeze, intended for automotive and industrial systems cooling. has resistance to vacuum. Layer inner resistant to heat and fluids cooling. Layer outer resistant to overheating, oil and aging. Inner layer: black rubber CR. Reinforcement: cord synthetic, steel spiral. Outer layer: black rubber CR. Working pressure: up to 4 bar. Operating temperature: od -40°C up to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThree-layer hose suction o specific the structure intended for discharge very hot (up to 1100°C) gases, vapours, fumes and air. outer Layer impregnated fabric glass with threads of steel stainless ensures strength mechanical, central thick fabric high-temperature fully role insulating, inner very fine mesh of steel stainless separates flow hot gases. Flame-retardant, to some extent resistant to hot sparks. used at furnaces and engines for extraction gases o very high temperature, in industry metallurgical, ceramic, shipbuilding, aviation, automotive and equipment military. hose o strong the structure and resistance to impacts thanks to outer spiral. Used only as a suction hose working under vacuum, due to the possibility of gases penetrating outwards under overpressure (degassing). hoses o small diameter internal < 100 mm are characterized tzw. two-hose design (Layer inner with mesh constitutes separate hose of spiral). Assembly of the hose on connectors with bridge clamps (lewo-handed). length standard: od 2 for 10 m - depending on the diameter. Hose material: 3 layer: externally impregnated fabric glass with fibres of steel stainless (grey), central Layer - high-temperature fabric insulating, inside fine mesh - steel stainless. Reinforcement: outer spiral with wire and sheet of steel stainless. Operating temperature: od -50°C up to +1100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery Light, flexible and very pliable hose intended for discharge aggressive chemical vapours and gases we all fields industry. excellent resistance chemical, high resistance temperature. hose is characterized high compressibility, resistance on impacts thanks to outer spiral. resistant to radiation UV, ozone, aging, conditions atmospheric, flame-retardant. available other diameter in the scope 50 ÷ 508 mm and version of spiral of steel stainless. Assembly of the hose on connectors with bridge clamps (lewo-handed). version PTFE EL CL - hose conductive electrically o resistance R ≤10 6 Ω, compliant with the directive ATEX 94/9/EC and the standard TRBS 2153, made with black PTFE. Checking chemical resistance - the chemical resistance table for PTFE (preliminary selection), confirmation of resistance and conditions of use - by Tubes International. length standard: 3 or 6 m. Hose material: light-brown fabric glass coated Teflon (PTFE), o wall thickness 0.12 mm - version standard PTFE CL, fabric glass coated black conductive Teflon (PTFE), o wall thickness 0.15 mm - version antistatic PTFE EL CL. Reinforcement: outer spiral with wire and sheet steel galvanized. Operating temperature: od -150°C up to +250°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong hose suction intended for conveying dry or liquid substances abrasive, granulates etc. externally Serrated, inside smooth. Layer inner with transparent, resistant to abrasion polyurethane. The hose has a copper wire arranged along the spiral which, after earthing or connection to an end, discharges electric charges. Widely used in processing plastics in use demanding greater resistance to abrasion, puncturing and cutting hose. especially recommended for regrind plastics o relatively sharp edges. Inner layer: transparent polyurethane. Reinforcement: rigid-PVC spiral. Hose material: transparent PVC. Working pressure: from 3 bar to 7 bar - depending on the diameter hose and temperatures. Vacuum: from 0.69 bar to 0.74 bar - depending on the diameter hose and temperatures. Operating temperature: od -5°C up to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, very flexible and pliable, resistant chemical and temperature-wise two-layer hose intended for discharge most aggressive chemical vapours, gases, dusts and fibres (non-abrasive), air blowing hot air. very good resistance chemical on aggressive chemicals thanks to internal layer PTFE. W version standard inner Layer white natural PTFE meets requirements industry food (FDA). W version antistatic EL black inner Layer PTFE is electrically conductive (R ≤10 6 Ω). thanks to layer outer with fabric glass coated silicone and layer internal with PTFE hose is resistant to temperature for 250ºC. hose is characterized high compressibility - for 1:6, strong design resistant on vibration, stretching and tearing, resistance on impacts thanks to outer spiral. resistant to radiation UV, ozone, aging, conditions atmospheric, flame-retardant. used in industry chemical, metallurgy metals and foundry, industry ceramic and glass. Also available with a stainless steel spiral (from 80 mm diameter). Assembly of the hose on connectors with bridge clamps (lewo-handed). Checking chemical resistance - the chemical resistance table for PTFE (preliminary selection), confirmation of resistance and conditions of use - by Tubes International. length standard: od 2 for 10 m. Material hose Inner layer: white foil PTFE PTFE - version standard SILTEF, black conductive foil PTFE PTFE - version antistatic SITEF EL. Material hose Outer layer: fabric glass coated silicone, silver - grey. Reinforcement: outer spiral with wire and sheet steel galvanized. Operating temperature: od -50°C up to +250°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, pliable and flexible hose intended for extraction hot fumes, gases, dusts, discharge exhaust gases, air cooling and air blowing. used we all fields industry for applications high-temperature, especially in design machine, vehicles, equipment engines, use aviation and military. resistant to temperature, flame-retardant and very strength mechanical. is characterized excellent compressibility, very strong design resistant on vibration and stretching, resistance on impacts thanks to outer spiral. Other diameters are available on special order in the scope 50 ÷ 508 mm. Assembly of the hose on connectors with bridge clamps (lewo-handed). length standard: 3 m (on special order also sections 6 and 10 m). Hose material: fabric with fibre aramid internal impregnated silver-grey silicone, o wall thickness 0.4 mm, externally green-grey. Reinforcement: type CLIP - outer spiral with wire and sheet steel galvanized left-handed. Operating temperature: od -60°C up to +260°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong, flexible, resistant to kinking hose suction - delivery designed for conveying hot, dry air of compressor for installation bowl tankers. ideal in cases when required is small radius bends. used in tankers road for transport bulk materials: cement trucks, feed trucks etc. and in other installations industrial. Layer outer resistant to ozone and conditions atmospheric. length standard: 60 m or 120 m. Inner layer: white rubber EPR. Reinforcement: a synthetic braid, steel spiral. Outer layer: blue (SAHARA®LL BD) or black (SAHARA® LL BN/PRO) EPDM rubber. Working pressure: 10 bar. Operating temperature: od -40°C up to +200°C (momentarily up to +240°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose suction - delivery for pneumatic conveying dry substances abrasive. special The design hose o exceptional resistance to abrasion. Layer inner smooth, with black antistatic rubber natural with embedded in it balls with corundum (Al 2 O 3 - oxide aluminum), material ceramic o high hardness. built-in cable copper, which po earthing (connection with earthed fitting) discharges charges electrical. Layer outer corrugated with black, antistatic (R 6 Ω) rubber SBR / NR resistant to abrasion and aging. hose intended for conveying dry strong abrasive substances: e.g. dry cement, carbon, coke, solid fuels with raw materials secondary, minerals, powders ceramic, shot steel, fragments glass, fibre glass. used in smelters, coking plants, power plants, cement plants, mines, smelters glass, factories materials abrasive and materials insulating. advantage is large service life hose in these use, traditional hose with rubber resistant to abrasion can work e.g. only several dni, a hose ALUSPHERE in these same conditions even several months. assembly: hose intended for mounting system GHIBLI - aluminum half-flanges PN10 applied externally on hose. Inner layer: balls ceramic embedded in black rubber NR. Reinforcement: cord synthetic, steel spiral. Outer layer: black rubber SBR/NR. Working pressure: from 8 bar to 10 bar - depending on the diameter hose. Vacuum: 0.9 bar. Operating temperature: od -30°C up to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight and pliable hose rubber, for extraction and transport sand, gravel, cement and other abrasive materials. Also used in systems for cleaning and removing abrasive material after abrasive blast treatment. Layer inner smooth, with abrasion-resistant rubber o wall thickness 3 mm. Layer outer corrugated, resistant to abrasion and conditions atmospheric. thanks to reinforcement spiral steel resistant to kinking and vacuum. designed both for extraction as and use pressure. It has a copper anti-electrostatic wire for discharging electric charges. Inner layer: black or brown rubber natural. Reinforcement: cord synthetic, steel spiral. Outer layer: black rubber NR/SBR. Working pressure: from 2 bar to 3 bar - depending on the diameter hose. Vacuum: for 0.9 bar. Operating temperature: od -30°C up to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFairly Light, flexible and pliable, resistant to temperature two-layer hose suction intended for discharge vapours, fumes and air o high temperature. Flame-retardant, to some extent resistant to hot sparks. used at furnaces and engines for extraction gases o high temperature, in industry metallurgical, ceramic, shipbuilding, aviation, automotive and equipment military. It is characterised by high compressibility - up to 1:6, a strong construction thanks to glass fabric reinforced with stainless steel threads, and impact resistance thanks to the external spiral. Used only as a suction hose working under vacuum, due to the possibility of gases penetrating outwards under overpressure (degassing). Also available with a stainless steel spiral (from 80 mm diameter). Assembly of the hose on connectors with bridge clamps (lewo-handed). Standard length: from 2 to 10 m - contact Tubes International. Hose material: 2 layer impregnated fabric glass with fibres of steel stainless, grey. Reinforcement: outer spiral with wire and sheet steel galvanized. Operating temperature: od -50°C up to +650°C.
