Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsClassic, high quality, rubber hose self-clamping (PUSH-ON). Do low-pressure installations hydraulic, installations pneumatic and as A universal hose industrial for air, water, oils, greases, light chemicals and liquids cleaning. Widely used in industry automotive (no use silicone in production hose). Layer outer resistant to conditions atmospheric, abrasion and oil. outer resistance to flame compliant with the standard MSHA 2G-14C/14. Non-conductive (R > 1 MΩ/inch at a voltage of 1000 V DC). Safety factor 4:1. The hose is designed to work with self-clamping PUSH-ON type ends. Available in colours: black (BK), blue (BL), green (G), grey (GY), red (R) and yellow (Y). Inner layer: black synthetic rubber Chemivic™ (NBR + vinyl). Reinforcement: a synthetic braid. Outer layer: black, blue, green, grey, red or yellow synthetic rubber. Working pressure: 20 bar. Operating temperature: from -40°C to +90°C.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, very flexible and pliable, resistant chemical and flame-retardant hose intended for applications in systems air conditioning, ventilation and heating. Do extraction and conveying hot air, aggressive chemical vapours, exhaust gases and gases in systems ventilation and heating. has resistance to UV, ozone and conditions atmospheric. used in equipment vehicles, engines and in industry chemical. is characterized high compressibility - for 1:6, strong design resistant on vibration and stretching, resistance on impacts thanks to outer spiral. Also available with a stainless steel spiral (from 80 mm diameter). Assembly of the hose on connectors with bridge clamps (lewo-handed). Checking chemical resistance - the chemical resistance table for CSM (preliminary selection), confirmation of resistance and conditions of use - by Tubes International. length standard: od 2 for 10 m. Hose material: externally black fabric polyester coated CSM - Hypalon. Reinforcement: outer spiral with wire and sheet steel galvanized. Operating temperature: od -35°C up to +175°C (momentarily up to +190°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, o high durability, A universal hose flat high quality used in industry mining, petroleum, power and agriculture. used in particular for water, sludge, sewage and fertilisers. made with resistant to hydrolysis and microbes polyurethane - polyether. Reinforcement with circumferentially woven braid polyester bonded and surrounded polyurethane in original process production extrusion thermoplastic polyurethane on hot through braid. hose o high strength on force longitudinal, o minimum elongation under pressure (up to 2%) and without tendency for coiling, screwing. thanks to durability connected easily operation (unwinding, laying, storage) Widely used in systems water (dewatering mines opencast, supply in water, drainage and discharge sewage) and not only. resistant to wide range substances chemical, microbes, fungi, hydrolysis, conditions atmospheric, UV and ozone. O sound resistance to abrasion. Available on special order in sections longer than 200 meters in diameters for 6”. in order to confirmation resistance and conditions use hose contact with Tubes International. maximum pressure working time use fixed acc. to coefficient safety 2:1 approved through the manufacturer (only for water and safe, non-flammable liquids). Dla maximum service life not recommended exceeding 1/3 pressure bursting. length standard roll: 200 m. Hose material: black polyurethane - polyether (PU). Working pressure: from 8 bar to 27 bar - depending on the diameter hose and temperatures. Operating temperature: od -50°C up to +75°C (water).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible hose suction-delivery intended for conveying water, beer, wine, alcohols with a concentration up to 20% and other products food. Not recommended for milk and its dairy products, oils and greasy substances food. compliant with the European requirements 1935/2004/EC and 10/2011/EU (simulant fluids A, B and C). along outer layer hose placed is cable antistatic. pressure working is 25% pressure bursting. Hose material: transparent PVC. Reinforcement: grey spiral PVC. Working pressure: from 2.4 bar to 5.6 bar, depending on the diameter hose. Operating temperature: from 0°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA strong suction-delivery hose intended for conveying dry abrasive substances. Layer inner smooth, antistatic, very resistant to abrasion (50±5 mm 3 acc. to ISO 4649, formerly DIN 53516). A built-in copper wire which, after earthing (or connection to an earthed end), discharges electric charges. Layer outer resistant to conditions atmospheric and ozone. hose intended for conveying dry strong abrasive substances: cement, sand, gravel etc. Inner layer: black rubber NR/SBR. Reinforcement: cord synthetic, steel spiral. Outer layer: black EPDM rubber. Working pressure: 6 bar. Vacuum: from 0.8 bar to 0.9 bar - depending on the diameter hose. Operating temperature: -30°C up to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-pressure, very durable hose for conveying compressed air. designed for use in heavy conditions squares construction, mines etc. for supply equipment o high wear compressed air. extremely strength and durable thanks to high quality materials and double-jacket the structure – double reinforcement with circumferentially woven braid polyester high strength, completely coated and lined thermoplastic polyurethane (PU). hose o very sound resistance to abrasion, resistant to puncture, abrasion and oil. hose not extends under pressure and is resistant to loads longitudinal. flat at rest, co facilitates operation and storage. Available in the molds ready lines o length 20 or 40 m, with factory mounted fitting. use for air under high pressure should be always preceded analysis risk in case accidental disconnection or bursting hose and possible use protections. maximum pressure working hose fixed acc. to coefficient safety 4:1 approved through the manufacturer for air. Not recommended exceeding 1/3 given force breaking. Hose material: polyurethane (PU). Reinforcement: double polyester braid. Outer layer: orange polyurethane PU). Working pressure: from 30 bar to 43.75 bar - depending on the diameter hose. Operating temperature: od -50°C up to +110°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible and smooth inside hose with white spiral, intended for discharge dusts, chips, fibres and light bulk materials in industry paper, textile, wood. its flexibility and flexible, retains also in low temperatures. dense steel spiral coated white PVC ensures high parameters pressure, is resistant to corrosion and has good adhesion for material hose. hose o sound resistance to abrasion, oils and gasoline. Assembly on connectors with bridge clamps (prawo-handed). Other diameters available on order. versions: P1 N PU – standard o high resistance to abrasion; P1 N PU AS – antistatic (R ≤ 10 8 Ω), compliant with TRBS 2153 and for extraction also with TRGS 727, resistant to microbes and hydrolysis; P1 N PU EL – conductive electrically (R ≤ 10 4 Ω), compliant with ATEX 2014/34/EU, TRBS 2153 and for extraction also with TRGS 727, can be used in zones hazard explosion (po carrying out analysis risk). Hose material: transparent polyester-polyurethane (P1 N PU), transparent polyether-polyurethane (P1 N PU AS), black polyether-polyurethane (P1 N PU EL). Reinforcement: spiral with wire steel coated PVC. Wall thickness measured between the spiral: 0.5 mm and 0.6 mm od diameters 100 mm. Operating temperature: od -40°C up to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong, specialized hose dragged for farmers designed for natural fertilisation in production plant (fertilisation slurry and slurry). used in comprehensive systems dispensing slurry m.in. in fillers. W these solutions slurry pumps using hose of bowl for dispensers / tanks mounted on tractor a then dispenses directly on surface soil. extremely strength and durable thanks to high quality materials and the structure. Reinforcement with circumferentially woven braid polyester high strength bonded and surrounded polyurethane in original process production extrusion thermoplastic polyurethane on hot through braid. thanks to high strength on stretching, abrasion, puncture, conditions atmospheric, radiation UV and small radius bends is Widely used for fertilisation fields. Available also in other versions DRAGMAN EXTRA (o increased force breaking), DRAGMAN PREMIUM (o increased resistance to abrasion) and in longer sections. maximum pressure working time use fixed acc. to coefficient safety 2:1 approved through the manufacturer (only for water and safe, non-flammable liquids). Dla maximum service life not recommended exceeding 1/3 pressure bursting and given force breaking. length standard roll: 200 m. Hose material: orange polyurethane (PU) pressed in a polyester braid high strength in process extrusion hose. Working pressure: from 15 bar to 22.5 bar - depending on the diameter hose and temperatures. Operating temperature: od -50°C up to +65°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery light and flexible hose with thermoplastic polyurethane intended for low-pressure installations hydraulic, pneumatic and water. used in automation industrial and industry automotive. free od LABS (linear alkylbenzene sulfonates), thanks to which not enters in reactions with paints. Safety factor 4:1. has a certain resistance to vacuum. The hose is designed to work with self-clamping PUSH-ON type ends. version NON CONDUCTIVE (TO-107…) not conductive electrically (leakage in conditions testing according to standards smaller od 50 μA for voltage 246 kV/m through 5 min), used at equipment electric, np. in systems cooling. Inner layer: polyurethane. Reinforcement: a synthetic braid. Outer layer: black polyurethane (standard), orange polyurethane (NON CONDUCTIVE). Working pressure: 20 bar. Operating temperature: from -40°C to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery strong, thick hose suction - delivery intended for conveying wide range wet and dry substances abrasive. thick Layer inner smooth, antistatic, resistant to abrasion (70 mm 3 acc. to ISO 4649, formerly DIN 53516). A built-in copper wire which, after earthing (or connection to an earthed end), discharges electric charges. Layer outer corrugated, resistant to conditions atmospheric and ozone. hose intended is for conveying substances abrasive mixed with water and dry: cement, sand, gravel, seeds etc. appropriate for use in heavy conditions - „Heavy Duty”. can be bent on relatively small radius bends, whereas its deflection requires considerable force. can be also easily cut on sections directly on space use and mounted of special fittings flanged PN10 (fitted on external surface hose). used in many use, e.g. for handling substances bulk in ports, for transport cuttings in mining, in industry chemical, in construction at works demolition, for suction and conveying water and sludge in works at dewatering, in gravel pits and sand plants, in works dredging and dredging. assembly: hose intended for mounting system VOLGA FRA – aluminum half-flanges PN10 applied externally on hose. Inner layer: black rubber NR/SBR. Reinforcement: cord synthetic, steel spiral. Outer layer: black EPDM rubber. Working pressure: 10 bar. Vacuum: 0.9 bar. Operating temperature: od -40°C up to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA strong delivery hose intended for pneumatic conveying of dry abrasive substances. Layer inner with white, smooth, resistant to abrasion rubber (≤110±5 mm 3 acc. to ISO 4649, formerly DIN 53516), o quality food, free of phthalates, compliant with requirements FDA 21 CFR 177.2600 for contact with food dry and BfR XXI kat.4. Reinforcement cord synthetic. Two built-in copper wires which, after earthing (or connection to an earthed end), discharge electric charges. Layer outer with rubber conductive electrically, resistant to conditions atmospheric and ozone. A hose intended for conveying dry food substances: grain, sugar, powders, feed, granulates, etc. and other abrasive substances, e.g. PVC granulate, for which a white, non-staining inner layer is required. It is not intended for work in ATEX explosion-hazard zones. available in two versions: BN standard (pressure working 6 bar) and BN SPECIAL (pressure working 8 bar). Standard length: 60 m (or 120 m - contact Tubes International). standards and requirements: industry food, contact with food 1935/2004/EC, 2023/2006/EC (GMP). Inner layer: white rubber NR/SBR. Reinforcement: cord synthetic. Outer layer: black EPDM rubber. Working pressure: 6 bar or 8 bar. Operating temperature: -30°C up to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong hose delivery intended for conveying water or compressed air. used in construction (in particular in companies occupying demolition), industry and mining. is suitable for heavy applications. yellow color ensures excellent visibility hose. Layer inner smooth, co ensures minimal losses flow. Layer outer lightly longitudinally ribbed, co serves increasing resistance to abrasion and protection against contact with hot element. resistant to abrasion, ozone, conditions atmospheric, oil, fuels and wide range chemicals. lighter and more flexible than standard hoses rubber. flat at rest, co facilitates operation and storage. Not requires washing and drying. resistant to loads longitudinal – during unwinding and pulling (force longitudinal not should never exceed 1/3 given force breaking, assembly ends should take into account force longitudinal). use for air should be always preceded analysis risk in case accidental disconnection or bursting hose. Hose material: yellow blend NBR/PVC pressed in braid polyester-polyamide in process extrusion hose. Working pressure: 30 bar (water), 22 bar (air). Operating temperature: od -20°C up to +80°C (water), od -20°C up to +75°C (air).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, in color grey, very flexible and pliable, resistant chemical and flame-retardant hose intended for applications in systems air conditioning, ventilation and heating. is characterized high compressibility - for 1:6, strong design resistant on vibration and stretching, resistance on impacts thanks to outer spiral. Available also in other colors and of spiral of steel stainless (od diameter 80 mm). version AS – antistatic (R ≤10 9 Ω) - made in color black. Assembly of the hose on connectors with bridge clamps (lewo-handed). checking resistance chemical: table resistance chemical PVC (selection initial), confirmation resistance and conditions use through Tubes International. Standard length: from 2 to 10 m - contact Tubes International. Hose material: grey fabric polyester impregnated PVC. Reinforcement: outer spiral with wire and sheet steel galvanized. Operating temperature: od -20°C up to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong hose suction-delivery intended for conveying dry or liquid substances abrasive, granulates etc. externally Serrated, inside smooth. Layer inner with transparent, resistant to abrasion polyurethane, o wall thickness od 0.6 mm (DN30) for 1 mm (DN100). The hose has a copper wire arranged along the spiral which, after earthing or connection to an end, discharges electric charges. Widely used in processing plastics in use demanding greater resistance to abrasion, puncturing and cutting hose. especially recommended for regrind plastics o relatively sharp edges. Standards and requirements: Food industry, food contact: compliant with the European requirements 1935/2004/EC and 10/2011/EU (simulant fluids A, B and C), 2023/2006/EC (GMP) – refers to liquid substances food. Inner layer: transparent polyurethane. Outer layer: transparent PVC. Reinforcement: rigid-PVC spiral. Working pressure: from 3 bar to 5 bar, depending on the diameter hose and temperatures. Vacuum: for 0.7 bar. Operating temperature: -10°C up to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong, flexible rubber hose fire-protection, adapted for use on drums. hose ANKARA EN made is according to standards EN 694 consists ofcej European standard for hoses for solid installation fire-protection and used commonly on drums in solid hydrants in buildings, installations industrial, centres commercial etc. Layer inner with rubber EPDM, resistant to light chemicals and fire-protection agents foam-forming. Layer outer with rubber EPDM resistant to abrasion and conditions atmospheric. perfectly works mounted on drums, ensuring Flow rate water at incomplete unrolling hose. presented hose ANKARA made is acc. to requirements older standards DIN 14817: 1991 intended for powder and foam agents firefighting, with layer inner with conductive rubber NR/SBR and o pressure working up to 20 bar, also adapted for use on drums. Inner layer: EPDM rubber (ANKARA EN), conductive rubber NR/SBR (ANKARA). Reinforcement: cord synthetic. Outer layer: EPDM rubber (ANKARA EN), rubber SBR (ANKARA). Working pressure: from 7 bar to 20 bar - depending on size and kinds hose. Operating temperature: od -20°C up to +60°C (ANKARA EN), od -40°C up to +70°C (ANKARA).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, pliable and flexible hose intended for extraction hot vapours, fumes, gases, dusts, discharge air cooling and air blowing. flame-retardant, resistant to temperature, radiation UV, ozone and aging. used we all fields industry for applications high-temperature, m.in. for extraction with furnaces in industry metallurgical, foundry, industry glass and ceramic. is characterized high compressibility, strong design resistant on vibration and stretching, resistance on impacts thanks to outer spiral. Other diameters are available on special order in the scope 50 ÷ 508 mm. Assembly of the hose on connectors with bridge clamps (lewo-handed). length standard: 3 m (on special order also sections 6 and 10 m). Hose material: fabric glass impregnated silicone (silver-grey), o wall thickness 0.4 mm. Reinforcement: outer spiral with wire and sheet steel galvanized. Operating temperature: od -60°C up to +300°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsRectangularly Serrated hose reinforced spiral steel, for hot water and liquids anti-freeze, intended for automotive and industrial systems cooling. has resistance to vacuum. Layer inner resistant to heat and fluids cooling. Layer outer resistant to overheating, oil and aging. Inner layer: black rubber CR. Reinforcement: cord synthetic, steel spiral. Outer layer: black rubber CR. Working pressure: up to 4 bar. Operating temperature: od -40°C up to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThree-layer hose suction o specific the structure intended for discharge very hot (up to 1100°C) gases, vapours, fumes and air. outer Layer impregnated fabric glass with threads of steel stainless ensures strength mechanical, central thick fabric high-temperature fully role insulating, inner very fine mesh of steel stainless separates flow hot gases. Flame-retardant, to some extent resistant to hot sparks. used at furnaces and engines for extraction gases o very high temperature, in industry metallurgical, ceramic, shipbuilding, aviation, automotive and equipment military. hose o strong the structure and resistance to impacts thanks to outer spiral. Used only as a suction hose working under vacuum, due to the possibility of gases penetrating outwards under overpressure (degassing). hoses o small diameter internal < 100 mm are characterized tzw. two-hose design (Layer inner with mesh constitutes separate hose of spiral). Assembly of the hose on connectors with bridge clamps (lewo-handed). length standard: od 2 for 10 m - depending on the diameter. Hose material: 3 layer: externally impregnated fabric glass with fibres of steel stainless (grey), central Layer - high-temperature fabric insulating, inside fine mesh - steel stainless. Reinforcement: outer spiral with wire and sheet of steel stainless. Operating temperature: od -50°C up to +1100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose delivery for sandblasting extremely resistant to abrasion. thick Layer inner with rubber o exceptionally sound resistance to abrasion (40±5 mm 3 acc. to ISO 4649 / DIN 53516). exceeds requirements standards ISO 3861:2008. The antistatic inner and outer layer prevents the accumulation of electric charges. Used for strongly abrasive materials such as quartz sand, steel shot, corundum, glass in abrasive blast treatment of steel structures, castings, concrete surfaces, etc.. Mounted with special sandblasting ends. length standard: 60 m / 40 m for diameter 16 mm (or 120 m - contact with Tubes International). Inner layer: black rubber NR/SBR. Reinforcement: cord synthetic. Outer layer: black synthetic rubber. Working pressure: 12 bar. Operating temperature: od -40°C up to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose delivery for sandblasting extremely resistant to abrasion. thick Layer inner with rubber o exceptionally sound resistance to abrasion (36 mm 3 acc. to ISO 4649:2014). exceeds requirements standards ISO 3861:2008. The electrically conductive inner layer and antistatic outer layer prevent the accumulation of electric charges. Used for strongly abrasive materials such as quartz sand, steel shot, corundum, glass in abrasive blast treatment of steel structures, castings, concrete surfaces, etc.. Mounted with special sandblasting ends. Inner layer: black rubber NR/BR/SBR. Reinforcement: cord synthetic. Outer layer: black rubber SBR. Working pressure: 12 bar. Operating temperature: od -35°C up to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong, flexible hose for water adapted for winding on drums. intended for use in high-pressure equipment firefighting and in vehicles fire ( booster hose ). Layer inner resistant to agents firefighting and foam-forming. Reinforcement made with thick layer high-strength cord. Layer outer resistant to conditions atmospheric. hose CHICAGO EN varies od basic version hose CHICAGO, made compliant with with the standard EN 1947: 2014 ( type C, class 1, category 2 ), whereas CHICAGO EN GL, made compliant with with the standard EN 1947, ale with luminescent layer external, enabling easy perceiving hose in darkness or at smoke. On special order available also versions hose compliant with the standard: ASTM C-542 and BS 3169. length standard roll: 60 m (120 m po confirmation for basic version hose). Inner layer: black EPDM rubber. Reinforcement: cord synthetic. Outer layer: black EPDM rubber (yellowish luminescent synthetic rubber – version GL). Working pressure: 40 bar. Operating temperature: od -40°C up to +100°C, od -20°C up to +60°C (EN 1947).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery Light, flexible and very pliable hose intended for discharge aggressive chemical vapours and gases we all fields industry. excellent resistance chemical, high resistance temperature. hose is characterized high compressibility, resistance on impacts thanks to outer spiral. resistant to radiation UV, ozone, aging, conditions atmospheric, flame-retardant. available other diameter in the scope 50 ÷ 508 mm and version of spiral of steel stainless. Assembly of the hose on connectors with bridge clamps (lewo-handed). version PTFE EL CL - hose conductive electrically o resistance R ≤10 6 Ω, compliant with the directive ATEX 94/9/EC and the standard TRBS 2153, made with black PTFE. Checking chemical resistance - the chemical resistance table for PTFE (preliminary selection), confirmation of resistance and conditions of use - by Tubes International. length standard: 3 or 6 m. Hose material: light-brown fabric glass coated Teflon (PTFE), o wall thickness 0.12 mm - version standard PTFE CL, fabric glass coated black conductive Teflon (PTFE), o wall thickness 0.15 mm - version antistatic PTFE EL CL. Reinforcement: outer spiral with wire and sheet steel galvanized. Operating temperature: od -150°C up to +250°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong hose suction intended for conveying dry or liquid substances abrasive, granulates etc. externally Serrated, inside smooth. Layer inner with transparent, resistant to abrasion polyurethane. The hose has a copper wire arranged along the spiral which, after earthing or connection to an end, discharges electric charges. Widely used in processing plastics in use demanding greater resistance to abrasion, puncturing and cutting hose. especially recommended for regrind plastics o relatively sharp edges. Inner layer: transparent polyurethane. Reinforcement: rigid-PVC spiral. Hose material: transparent PVC. Working pressure: from 3 bar to 7 bar - depending on the diameter hose and temperatures. Vacuum: from 0.69 bar to 0.74 bar - depending on the diameter hose and temperatures. Operating temperature: od -5°C up to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, very flexible and pliable, resistant chemical and temperature-wise two-layer hose intended for discharge most aggressive chemical vapours, gases, dusts and fibres (non-abrasive), air blowing hot air. very good resistance chemical on aggressive chemicals thanks to internal layer PTFE. W version standard inner Layer white natural PTFE meets requirements industry food (FDA). W version antistatic EL black inner Layer PTFE is electrically conductive (R ≤10 6 Ω). thanks to layer outer with fabric glass coated silicone and layer internal with PTFE hose is resistant to temperature for 250ºC. hose is characterized high compressibility - for 1:6, strong design resistant on vibration, stretching and tearing, resistance on impacts thanks to outer spiral. resistant to radiation UV, ozone, aging, conditions atmospheric, flame-retardant. used in industry chemical, metallurgy metals and foundry, industry ceramic and glass. Also available with a stainless steel spiral (from 80 mm diameter). Assembly of the hose on connectors with bridge clamps (lewo-handed). Checking chemical resistance - the chemical resistance table for PTFE (preliminary selection), confirmation of resistance and conditions of use - by Tubes International. length standard: od 2 for 10 m. Material hose Inner layer: white foil PTFE PTFE - version standard SILTEF, black conductive foil PTFE PTFE - version antistatic SITEF EL. Material hose Outer layer: fabric glass coated silicone, silver - grey. Reinforcement: outer spiral with wire and sheet steel galvanized. Operating temperature: od -50°C up to +250°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsExtremely Light, flexible hose delivery for water intended for internal protection fire-protection buildings. Layer inner with high quality rubber synthetic. layer external constitutes strong, dense a polyester braid with stiffening thin and densely arranged spiral plastic PET. hose is used in cabinets hydrants internal with section 20 m for 30 m hose wound on A reel (reel) with mounted on the end hose nozzle. compliant with the standard EN 694 for hoses firefighting ( type B class 5 ). W the scope protection fire-protection (Poland) has certificate conformity CNBOP-PIB. can be also used in industry - for water sea, water industrial and some light diluted chemicals and for air, dusts and light particles solid. Not is intended for use in heavy conditions external. Assembly with clamps or ferrules clamping on ends with smooth, free of sharp barbs spigots, in order to avoiding cutting layer internal. Inner layer: smooth synthetic rubber. Reinforcement: a polyester braid with stiffening spiral (cord) PET. Working pressure: from 7 bar to 12 bar - depending on the diameter hose. Operating temperature: od -20°C up to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, pliable and flexible hose intended for extraction hot fumes, gases, dusts, discharge exhaust gases, air cooling and air blowing. used we all fields industry for applications high-temperature, especially in design machine, vehicles, equipment engines, use aviation and military. resistant to temperature, flame-retardant and very strength mechanical. is characterized excellent compressibility, very strong design resistant on vibration and stretching, resistance on impacts thanks to outer spiral. Other diameters are available on special order in the scope 50 ÷ 508 mm. Assembly of the hose on connectors with bridge clamps (lewo-handed). length standard: 3 m (on special order also sections 6 and 10 m). Hose material: fabric with fibre aramid internal impregnated silver-grey silicone, o wall thickness 0.4 mm, externally green-grey. Reinforcement: type CLIP - outer spiral with wire and sheet steel galvanized left-handed. Operating temperature: od -60°C up to +260°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSoft hose delivery, for greater diameters and small wall thickness almost flat at rest, intended for pneumatic conveying dry substances bulk. Layer inner with black, smooth, antistatic (R 6 Ω), resistant to abrasion rubber (70±5 mm 3 acc. to ISO 4649, formerly DIN 53516). Reinforcement cord synthetic. Layer outer with antistatic (R 6 Ω) rubber resistant to abrasion, conditions atmospheric and ozone. hose used primarily for handling cement, sand, gravel, silica and other dry materials abrasive with tankers railway, road and silos. Standard length: 60 m (or 120 m - contact Tubes International). Inner layer: black rubber NR/SBR. Reinforcement: cord synthetic. Outer layer: black rubber NR/SBR. Working pressure: from 5 bar to 6 bar - depending on the diameter hose. Operating temperature: od -40°C up to +70°C. indexes marked on the end letters XE have layer inner with rubber antistatic o high resistance to abrasion (abrasion resistance 50 mm 3 acc. to ISO4649) and with a cable copper.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong, flexible, resistant to kinking hose suction - delivery designed for conveying hot, dry air of compressor for installation bowl tankers. ideal in cases when required is small radius bends. used in tankers road for transport bulk materials: cement trucks, feed trucks etc. and in other installations industrial. Layer outer resistant to ozone and conditions atmospheric. length standard: 60 m or 120 m. Inner layer: white rubber EPR. Reinforcement: a synthetic braid, steel spiral. Outer layer: blue (SAHARA®LL BD) or black (SAHARA® LL BN/PRO) EPDM rubber. Working pressure: 10 bar. Operating temperature: od -40°C up to +200°C (momentarily up to +240°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose suction - delivery for pneumatic conveying dry substances abrasive. special The design hose o exceptional resistance to abrasion. Layer inner smooth, with black antistatic rubber natural with embedded in it balls with corundum (Al 2 O 3 - oxide aluminum), material ceramic o high hardness. built-in cable copper, which po earthing (connection with earthed fitting) discharges charges electrical. Layer outer corrugated with black, antistatic (R 6 Ω) rubber SBR / NR resistant to abrasion and aging. hose intended for conveying dry strong abrasive substances: e.g. dry cement, carbon, coke, solid fuels with raw materials secondary, minerals, powders ceramic, shot steel, fragments glass, fibre glass. used in smelters, coking plants, power plants, cement plants, mines, smelters glass, factories materials abrasive and materials insulating. advantage is large service life hose in these use, traditional hose with rubber resistant to abrasion can work e.g. only several dni, a hose ALUSPHERE in these same conditions even several months. assembly: hose intended for mounting system GHIBLI - aluminum half-flanges PN10 applied externally on hose. Inner layer: balls ceramic embedded in black rubber NR. Reinforcement: cord synthetic, steel spiral. Outer layer: black rubber SBR/NR. Working pressure: from 8 bar to 10 bar - depending on the diameter hose. Vacuum: 0.9 bar. Operating temperature: od -30°C up to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight and pliable hose rubber, for extraction and transport sand, gravel, cement and other abrasive materials. Also used in systems for cleaning and removing abrasive material after abrasive blast treatment. Layer inner smooth, with abrasion-resistant rubber o wall thickness 3 mm. Layer outer corrugated, resistant to abrasion and conditions atmospheric. thanks to reinforcement spiral steel resistant to kinking and vacuum. designed both for extraction as and use pressure. It has a copper anti-electrostatic wire for discharging electric charges. Inner layer: black or brown rubber natural. Reinforcement: cord synthetic, steel spiral. Outer layer: black rubber NR/SBR. Working pressure: from 2 bar to 3 bar - depending on the diameter hose. Vacuum: for 0.9 bar. Operating temperature: od -30°C up to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFairly Light, flexible and pliable, resistant to temperature two-layer hose suction intended for discharge vapours, fumes and air o high temperature. Flame-retardant, to some extent resistant to hot sparks. used at furnaces and engines for extraction gases o high temperature, in industry metallurgical, ceramic, shipbuilding, aviation, automotive and equipment military. It is characterised by high compressibility - up to 1:6, a strong construction thanks to glass fabric reinforced with stainless steel threads, and impact resistance thanks to the external spiral. Used only as a suction hose working under vacuum, due to the possibility of gases penetrating outwards under overpressure (degassing). Also available with a stainless steel spiral (from 80 mm diameter). Assembly of the hose on connectors with bridge clamps (lewo-handed). Standard length: from 2 to 10 m - contact Tubes International. Hose material: 2 layer impregnated fabric glass with fibres of steel stainless, grey. Reinforcement: outer spiral with wire and sheet steel galvanized. Operating temperature: od -50°C up to +650°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThick, strong, flexible, resistant to kinking hose delivery designed for conveying hot, dry air of compressor for installation bowl tankers. used in tankers road for transport bulk materials: cement trucks, feed trucks etc. and in other installations industrial. Layer outer resistant to ozone and conditions atmospheric. length standard: 60 m or 120 m. Inner layer: white rubber EPR. Reinforcement: cord synthetic. Outer layer: blue EPDM rubber. Working pressure: 10 bar. Operating temperature: od -40°C up to +200°C (momentarily up to +240°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, very flexible hose for compressed air, o sound resistance to oils mineral. very resistant to abrasion. yellow color ensures excellent visibility hose. hose has thickened layer external co 20 m, marked on hose („TAGLIO / CUT”) and in these places recommended is cutting hose and assembly fittings. then space mounting fittings is reinforced and more resistant to bending. Z roll 60 m can make 3 lines o length 20 m with fittings. possible is however use hose with fittings mounted in places non-thickened. hose used for hammers and drills pneumatic. Inner layer: black blend PVC/NBR. Reinforcement: double polyester braid. Outer layer: black or yellow blend PVC/PU. Working pressure: 20 bar - dependent od temperatures. Operating temperature: od -10°C up to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, very flexible and pliable, resistant chemical two-layer hose intended for discharge most aggressive chemical vapours, gases, dusts and fibres (non-abrasive). very good resistance chemical on aggressive chemicals thanks to internal layer film PTFE. W version standard inner Layer white natural PTFE meets requirements industry food (FDA). W version antistatic EL black inner Layer PTFE is electrically conductive (R ≤10 6 Ω). hose is characterized high compressibility - for 1:6, strong design resistant on vibration, stretching and tearing, resistance on impacts thanks to outer spiral. resistant to radiation UV, ozone and aging. used in industry chemical and food. Also available with a stainless steel spiral (from 80 mm diameter). Assembly of the hose on connectors with bridge clamps (lewo-handed). Checking chemical resistance - the chemical resistance table for PTFE (preliminary selection), confirmation of resistance and conditions of use - by Tubes International. length standard: od 2 for 10 m. Material hose Inner layer: white foil PTFE PTFE - version standard PETEF, black conductive foil PTFE PTFE - version antistatic PETEF EL. Material hose Outer layer: fabric polyethylene coated polyethylene (PE). Reinforcement: outer spiral with wire and sheet steel galvanized. Operating temperature: od -40°C up to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose delivery for plastering. Layer inner with rubber o sound resistance to abrasion (70±5 mm 3 acc. to ISO 4649 / DIN 53516). The antistatic inner and outer layer prevents the accumulation of electric charges. multiple Reinforcement cord synthetic ensures high strength pressure. Layer outer resistant abrasion, conditions atmospheric and ozone. used for spraying wet mortar: cement, plaster and gypsum in works construction. commonly used for units plastering. Mounted with special plastering ends. hose NIAGARA LIGHT to version economical o slightly thinner wall (marked letter "L" on the end index). length standard: 60 m and 40 m version LIGHT (or 120 m - contact with Tubes International). Inner layer: black rubber SBR/NR. Reinforcement: cord synthetic. Outer layer: black rubber SBR/NR. Working pressure: 40 bar. Operating temperature: od -40°C up to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA strong suction-delivery hose intended for conveying dry abrasive substances. Layer inner with white, smooth, resistant to abrasion rubber (80 mm 3 acc. to ISO 4649, formerly DIN 53516), compliant with requirements FDA 21 CFR 177.2600 for contact with food. Two built-in copper wires which, after earthing (or connection to an earthed end), discharge electric charges. Layer outer resistant to conditions atmospheric and ozone. A hose intended for conveying dry food substances: grain, sugar, powders, feed, granulates, etc. and other abrasive substances, e.g. PVC granulate, for which a white, non-staining inner layer is required. It is not intended for work in ATEX explosion-hazard zones. Standards and requirements: Food industry, food contact: 1935/2004/EC, 2023/2006/EC (GMP), BfR XXI kat.4. Standard length: 60 m (or 120 m - contact Tubes International). Inner layer: white rubber NR/SBR. Reinforcement: cord synthetic, steel spiral. Outer layer: black EPDM rubber. Working pressure: from 6 bar to 8 bar, depending on the diameter hose. Vacuum: 0.9 bar. Operating temperature: -30°C up to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible hose intended for discharge dusts, sawdust, chips, light bulk materials o properties abrasive. used in industry wood, construction, food. resistant to ozone. Wall thickness measured between the spiral. available other diameter in the scope 30 ÷ 400 mm. Hose material: transparent polyurethane. Reinforcement: copper-plated spiral with wire steel. Operating temperature: od -40°C up to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, very flexible and pliable, resistant chemical hose intended for discharge aggressive chemical vapours, gases, dusts and fibres. used mainly in industry chemical and m.in. at removal asbestos. very good resistance chemical on solvents and other aggressive vapours. resistant to hydrolysis and corrosion biological. Contains no halogen compounds or plasticisers. is characterized high compressibility - for 1:8, strong design, resistance on impacts thanks to outer spiral. Also available with a stainless steel spiral (from 80 mm diameter). Assembly of the hose on connectors with bridge clamps (lewo-handed). Checking chemical resistance - the chemical resistance table for polyethylene (preliminary selection), confirmation of resistance and conditions of use - by Tubes International. length standard: od 2 for 10 m. Hose material: fabric polyethylene coated polyethylene (PE). Reinforcement: outer spiral with wire and sheet steel galvanized. Operating temperature: od -40°C up to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose delivery for pneumatic conveying dry substances abrasive. special The design hose o exceptional resistance to abrasion. Layer inner smooth, with black antistatic rubber natural with embedded in it balls with corundum (Al 2 O 3 – oxide aluminum), material ceramic o high hardness. built-in cable copper, which po earthing (connection with earthed fitting) discharges charges electrical. Layer outer with black, antistatic (R 6 Ω) rubber SBR / NR resistant to abrasion and aging. hose intended for conveying dry strong abrasive substances: e.g. dry cement, carbon, dust carbon, coke, solid fuels with raw materials secondary, minerals, powders ceramic, shot steel, fragments glass, fibre glass. used in smelters, coking plants, power plants, cement plants, mines, smelters glass, factories materials abrasive and materials insulating. advantage is large service life hose in these use – traditional hose with rubber resistant to abrasion can work e.g. only several dni, a hose ALUSPHERE in these same conditions even several months. Inner layer: balls ceramic embedded in black rubber NR. Reinforcement: cord synthetic. Outer layer: black rubber SBR/NR. Working pressure: 12 bar. Operating temperature: od -30°C up to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery light and extremely pliable hose rubber, for extraction dusts, powders and other lightly abrasive materials. Layer inner smooth, with abrasion-resistant rubber o wall thickness 2.4 mm. Layer outer corrugated, resistant to abrasion and conditions atmospheric. thanks to reinforcement spiral steel resistant to kinking and vacuum for 0.6 bar. Not is intended for use with overpressure, designed only for vacuum (extraction). Due to lightness and exceptional as on hose rubber flexible perfectly works in systems vacuum cleaning in industry, on example in quarries or smelters. It has a copper anti-electrostatic wire for discharging electric charges. Inner layer: black rubber natural. Reinforcement: cord synthetic, steel spiral. Outer layer: black rubber SBR. Vacuum: for 0.6 bar. Operating temperature: od -40°C up to +70°C.
