Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsCoolant hose in a 1/2" system made of corrosion-resistant acetal, resistant to solvents, oils, and greases, providing rigidity and elasticity of the pipes. Designed for low-pressure transmission of air, water, oils, and other substances used in cooling processes and metalworking. Resistant to abrasion and vibrations, ensuring 100% positional stability and does not cause damage to cutting tools. Very easy to expand modular construction. Available lengths: 2x13.5 cm or 100 cm. Material: acetal. Working pressure: up to 2 bar. Maximum flow: 1700 l/hour. Operating temperature: up to +65°C.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdaptor - high-pressure "T" fitting type A310 with external NPT thread (thread seal) and 2 x internal NPT threads (thread seal). Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBSP and NPT internal threaded fittings for rubber hoses for steam, with a ribbed tail for the hose, with a lock – for installation in the hose using BOSS SBC type steam clamps. The complete fitting consists of three parts – a spherical end GB with a spigot (“tail”) for the hose, a wing nut B with a special internal thread (NPS), and a special GFB adapter with an external thread (NPS) matching the nut and an internal thread of the same size as the fitting. The GFB adapter has a conical polymer or copper insert that works with the spherical end. This creates a tight, steam-resistant, and high-temperature connection that is also easy to unscrew and screw without the use of special tools, using the wing nut. Material: galvanized steel/cast iron. Working pressure: 18 bar (+210°C) - saturated steam. Operating temperature: up to +230°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic end fitting (type Z - with a regular hydraulic "tail" for hose), with internal metric thread and nut, sealing with an O-ring on a 24° cone (DKOL), lightweight series. Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the hose type. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCEJN series 525 quick coupling plug (NORDIC RANGE) with shut-off valve and eliminator, featuring internal BSP thread. Designed for heavy-duty working conditions. Application: hydraulic power (hydraulic oil), industrial (water, steam, fuels and oils, gases and chemicals). Material: zinc-nickel coated steel. Working pressure: up to 450 bar (depending on diameter). Safety factor 4:1. Sealing: NBR. Operating temperature: from -30°C to +100°C. Flow rate is specified for a pressure drop of 3 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCoolant hose in the 3/8" system made of corrosion-resistant acetal, resistant to solvents, oils, and greases, providing rigidity and elasticity of the hoses. Designed for low-pressure transmission of air, water, oils, and other substances used in cooling processes and metalworking. Resistant to abrasion and vibrations, ensuring 100% positional stability and does not cause damage to cutting tools. Very easy to expand modular construction. Available lengths: 2x14.5 cm or 100 cm. Material: acetal. Working pressure: up to 3 bar. Maximum flow: 1500 l/hour. Operating temperature: up to +65°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsDYROS series 30 quick coupling plug with external thread and valve. Available with metric or BSP thread. Designed for cooling liquids in plastic processing, compressed air installations, gas cylinder applications, and other technical fields. Material: brass. Valve sealing: viton. Working pressure: 15 bar.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-pressure adapter type A101T with external BSPT threads (seal on the thread). Material: AISI 316 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDN 9 quick coupling socket with "tail" for PUSH-ON hose, with or without valve, widely used in the industry for cooling injection molds and casting parts made of plastics, aluminum, brass, and zinc alloys. It can be used for water in cleaning machines, hot oil, and steam. Flow diameter: 9 mm. Working pressure: 25 bar. Operating temperature: from -20°C to +200°C (viton). Material: brass (socket body, connection, valve sleeve), stainless steel (spring, ring, balls).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSBC (Steam Bolt Clamp) clamps made of galvanized cast iron, stainless steel (AISI 316), and brass, bolted with claws for locking (flange) of the ends. Designed primarily for mounting ends for steam types GF and MS BOSS in rubber hoses for steam. The clamp must be precisely matched to both the size (internal diameter) of the hose and the actual external diameter of the hose, and during operation, it should be periodically checked and possibly tightened. Depending on the size, the clamps differ in shape, number of claws, and number of fastening screws. Material: galvanized cast iron, stainless steel AISI 316, brass. Working pressure: 18 bar (+210°C) - saturated steam. Operating temperature: up to +230°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsNon-leak quick-connect coupling plug type "flat-face" designed mainly for construction machinery, where large pressure spikes occur. Version with static pressure eliminator. The quick coupling can be operated with one hand. Depending on the application, the appropriate sealing material should be selected. Interchangeable with ISO-F quick couplings from other manufacturers. Standard: ISO 16028. Application: hydraulic power (hydraulic oil), industrial. Working pressure: up to 400 bar. Material: steel with zinc-nickel coating. Sealing: NBR (from -25°C to +100°C). Maximum static pressure during coupling of quick couplings with plug with pressure eliminator: from the socket side 0 bar, from the plug side 250 bar. Flow rate is given at Δp = 3 bar [l/min].
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCoolant hose in the 1/4" system made of corrosion-resistant acetal, resistant to solvents, oils, and greases, providing rigidity and flexibility of the hoses. Designed for low-pressure transmission of air, water, oils, and other substances used in cooling processes and metalworking. Resistant to abrasion and vibrations, ensuring 100% positional stability and does not cause damage to cutting tools. Very easy to expand modular construction. Available lengths: 2x145 mm, 100 mm, 200 mm, 300 mm, 400 mm, 500 mm, 600 mm, 700 mm, 800 mm, 900 mm, and 1000 mm. Material: acetal. Working pressure: up to 3 bar. Maximum flow: 1136 l/hour. Operating temperature: up to +76°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-pressure hydraulic adapter, type A101 with external BSPT threads (seal on the thread). Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsExternal threaded BSPT end, type SSF (economic version). Designed primarily for rubber hoses for steam, with a corrugated tail and lock, for installation in the hose using shell clamps for steam (Heavy Duty type). Manufactured according to EN 14423 (DIN 2826). Material: AISI 304 steel, brass. Working pressure: 18 bar (+210°C) – saturated steam, other applications: selection in contact with Tubes International.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic end (type Z - with a regular hydraulic "tail" for the hose), with internal BSP thread and nut, 60° sealing cone (DKR). Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the hose type. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsScrew quick coupling - plug, type HS with internal BSP thread. Coupling can be screwed under a maximum pressure of 50 bar. Application: hydraulic power (hydraulic oil). Material: galvanized steel. Socket sealing: NBR (operating temperature from -25°C to +100°C). Working pressure: up to 450 bar (depending on the size of the quick coupling). Safety factor 4:1. Flow has been provided for a pressure drop of 3 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsOil, grease, and hot chip resistant hose designed for low-pressure delivery of liquid or gaseous coolant during metal processing. It features a so-called shape memory, allowing for precise direction of the coolant flow. Supplied as ready-made hoses with an external BSP threaded connection ending with a metric external thread. Material: black PVC. Reinforcement: steel guiding cover, diameter DN 10 has an additional spiral cover made of nickel-plated steel sheet. Working pressure: 4 bar. Operating temperature: up to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDN 9 quick coupling plug with external thread BSP, BSPT, NPT, and metric, with or without valve, widely used in the industry for cooling injection molds and casting parts made of plastics, aluminum, brass, and zinc alloys. Can be used for water in cleaning machines, hot oil, steam. Flow diameter: 9 mm. Working pressure: 15 bar. Operating temperature: from -20°C to +200°C (viton). Material: brass (plug body, valve), stainless steel (spring).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdaptor - high-pressure blind plug JIS type A407 with internal BSP thread (sealing inverted cone 60°) - TOYOTA. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick coupling socket DYROS series 6 with hose end and shut-off valve. Designed for cooling liquids for molds in plastic processing, compressed air installations, gas cylinders, and other technical fields. Material: all components are made of brass, while the retaining rings, springs, and balls are made of treated stainless steel. Sealing: viton. Working pressure: 15 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThick, strong, and flexible pressure hose with steel reinforcement and an outer layer resistant to oil, for conveying saturated and superheated steam. The inner layer has good resistance to high temperature and saturated steam. It can be temporarily used for superheated steam at a temperature of 232°C and pressure of 18 bar; prolonged use with superheated steam reduces the hose's lifespan. The outer layer is resistant to oil, temperature, weather conditions, abrasion, and aging. The hose is used in the chemical, petrochemical, and energy industries, and in other industrial applications, particularly where resistance of the outer layer to oils, greases, and other petrochemical products is required. It is not intended for steam cleaners ("dry steam cleaners"). For steam, use special screw-on fittings designed for steam. To extend lifespan, the hose should be emptied of steam after use to avoid condensate accumulation. The VAPOFER EN ISO 6134 hose is antistatic (R ≤106Ω), compliant with standard EN ISO 6134/05 type 2 class B (Ω). Standard length: 60 m (or 120 m - contact Tubes International). Inner layer: black EPDM rubber. Reinforcement: double steel wire braid. Outer layer: black synthetic rubber, microperforated. Working pressure: 18 bar. Operating temperature: from -40°C to +210°C (temporarily up to +232°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsScrew-on quick coupling - socket, type HS with internal BSP thread. It has an additional O-ring on the socket body that prevents the quick coupling from unscrewing in situations of pulsating pressure and vibration. Tightening the quick coupling under static pressure is allowed up to a maximum of 50 bar. Application: hydraulic power (hydraulic oil). Material: galvanized steel. Socket sealing: NBR (operating temperature from -25°C to +100°C). Working pressure: up to 450 bar (depending on the size of the quick coupling). Safety factor 4:1. Flow has been provided for a pressure drop of 3 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsZF12T clamp sleeve for rubber hydraulic hoses type 1SN(R1AT), 2SN(R2AT) or 2SC. Installation - no machining required. Surface coated with zinc-nickel with a layer thickness of 6-10 µm, which exhibits very high corrosion resistance (up to 720 hours without corrosion in a salt spray chamber). Diameter D1 [mm] - outer diameter. Material: carbon steel, zinc-nickel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose with magnetic base and valve for coolant supply - system 1/4". Components: 20 segments (L=300 mm), flat nozzle 1", valve with external thread 1/4" BSPT, and magnetic base with "tail" for 1/4" hose (end thread size 1/8" NPT). Material: acetal. Working pressure: up to 3 bar. Operating temperature: up to +65°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-pressure adapter type A301 with external NPT threads (thread seal). Material: AISI 316L steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick coupling socket DYROS series 6 with hose end without valve. Designed for cooling liquids in plastic processing, compressed air installations, gas cylinder applications, and other technical fields. Material: all components are made of brass, while the retaining rings, springs, and balls are made of treated stainless steel. Sealing: viton. Working pressure: 15 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-quality Heavy Duty clamp designed primarily for rubber steam hoses for the installation of steam fittings type VSS, MSS, FSS, SSF. Manufactured (sizes 1/2” to 2”) according to EN 14423 (DIN 2826). Screws and nuts made of galvanized steel (for brass clamps), made of stainless steel (for stainless steel clamps). The clamp must be selected according to the internal diameter of the hose and the wall thickness of the hose according to the nominal size of the clamp, so that the outer diameter of the installed hose fits within the specified range for the clamp. Preliminary tightening of the clamp requires the use of long auxiliary screws. Material: brass, AISI 316 steel. Operating temperature: up to +230°C. Working pressure: 18 bar (+210°C) – saturated steam, other applications: selection in contact with TUBES INTERNATIONAL®.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsZF12T clamping sleeve for rubber hydraulic hoses type 1SN(R1AT) or 2SN(R2AT). Installation - no machining. Diameter D1 [mm] - outer diameter. Diameter D2 [mm] - inner diameter. Diameter D3 [mm] - locking diameter. Material: AISI 316L steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCoolant hose in a 3/4" system made of corrosion-resistant acetal, resistant to solvents, oils, and greases, providing rigidity and flexibility of the hoses. Designed for low-pressure transmission of air, water, oils, and other substances used in cooling processes and metalworking. Resistant to abrasion and vibrations, ensuring 100% positional stability and does not cause damage to cutting tools. Very easy to expand modular construction. Available lengths: 2x15 cm or 100 cm. Material: acetal. Working pressure: up to 1.4 bar. Maximum flow: 1900 l/hour. Operating temperature: up to +65°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdaptor - high-pressure four-way fitting type A124 with internal BSP thread (seal on the thread). Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDYROS series 6 quick coupling socket with external thread and shut-off valve. Available with metric or BSP thread. Designed for cooling liquids in plastic processing, compressed air installations, gas cylinders, and other technical fields. Material: all components are made of brass, while the retaining rings, springs, and balls are made of treated stainless steel. Sealing: viton. Working pressure: 15 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsExternal tapered thread BSPT and NPT fittings for rubber hoses for steam, with a ribbed tail for the hose, featuring a lock. They ensure a secure connection between the hose and the installation. Mounted to the hose using a clamp for steam type SBC BOSS. Sealing on the tapered BSPT or NPT thread using sealing material (e.g., Teflon tape). Depending on the size and type of material, the fittings may vary in the shape of the tail. Material: galvanized steel, galvanized cast iron, AISI 316 stainless steel, brass. Working pressure: 18 bar (+210°C) - saturated steam. Operating temperature: up to +230°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic end (type Z - with a regular hydraulic "tail" for hose), with internal BSP thread and nut, sealing cone 60° (DKR), angled 90°. Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the hose type. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsNon-leak quick-connect coupling type "flat-face" designed mainly for construction machinery, where large pressure spikes occur. Couplings are also available in a version with a static pressure eliminator. The quick-connect can be operated with one hand. Depending on the application, the appropriate sealing material should be selected. Interchangeable with ISO-F quick couplings from other manufacturers. Standard: ISO 16028, excluding size DN5. Application: hydraulic power (hydraulic oil), industrial. Material: steel with zinc-nickel coating. Working pressure: up to 500 bar. Sealing: NBR (from -25°C to +100°C), viton (from -15°C to +200°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-pressure adaptor JIS type A404 with internal BSP thread (sealing inverted cone 60°) - TOYOTA and with external BSPT thread (sealing on the thread). Used in hydraulic power systems for connecting hydraulic flexible hoses and pipes with other installation components (pumps, valves, quick couplings, etc.). Allows for reduction of type and size, compatible with the connections of the joined components. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick coupling socket DYROS series 30 with hose end and shut-off valve. Designed for cooling liquids for molds in plastic processing, compressed air installations, gas cylinders, and other technical fields. Material: all components are made of brass, while the retaining rings, springs, and balls are made of treated stainless steel. Sealing: viton. Working pressure: 15 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-quality BSP internal thread fittings. Designed for rubber hoses for steam, with a corrugated tail for the hose, with a lock – for installation in the hose using shell clamps for steam (Heavy Duty type). Sealing of the fittings using a special fiber gasket (Frenzelit®), flat for the galvanized steel and brass versions, and PTFE for stainless steel. Material: galvanized steel, AISI 316 steel, brass. Operating temperature: up to +230°C. Working pressure: 18 bar (+210°C) - saturated steam.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic end fitting (type Z - with a regular hydraulic "tail" for hose), with internal BSP thread and nut, 60° sealing cone (DKR). Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the type of hose. Material: AISI 316L steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsTEMA STANDARD quick coupling plug (NORDIC RANGE) without valve with internal BSP thread. Designed for heavy-duty working conditions. Application: hydraulic power (hydraulic oil), industrial (water, steam, fuels and oils, gases and chemicals). Material: chrome-plated brass up to size 1", galvanized steel above 1". Working pressure: up to 450 bar (depending on diameter). Safety factor 4:1. Flow rate is given at Δp = 3 bar [l/min].
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdaptor - high-pressure blind plug type A314 with internal NPT thread (thread seal). Material: carbon steel, galvanized.
