Our products
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSuction and discharge hose designed for the transfer of liquid products from the petrochemical industry containing up to 50% aromatic hydrocarbons, fuels, gasoline, diesel, heating oil, lubricating oils, etc. The inner layer is made of black, smooth, antistatic (dissipating electric charges 10^4 Ω < R < 10^9 Ω) NBR rubber. Reinforcement with synthetic cord and steel spirals. The outer layer is made of black NBR rubber, resistant to oil and weather conditions. Relatively low weight and flexible hose construction make it easy to handle, characterized by a wide, universal application for fuel transfer or other compatible media in typical working conditions. Inner layer: black NBR rubber. Reinforcement: synthetic cord, steel spirals. Outer layer: black NBR rubber. Working pressure: 10 bar. Vacuum: 0.9 bar. Operating temperature: from -35°C to +80°C.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong RIG STAR D discharge hose and RIG STAR SD suction-discharge hose are designed for the transfer and handling of crude oil, petrochemical products, and drilling cuttings mixed with crude oil (up to 50% aromatic compounds). It can also be used for cement, barite, seawater, and brine. The inner layer is made of black, smooth, antistatic NBR rubber. It features a copper wire ensuring electrical continuity between the hose ends. The outer layer is made of CR chloroprene rubber, flame-retardant, resistant to abrasion, ozone, seawater, and weather conditions. Designed as a specialized OFFSHORE hose for operation on drilling platforms. Widely used on North Sea platforms. It can also be successfully used in land applications. Inner layer: black NBR rubber. Reinforcement: synthetic cord, steel spiral. Outer layer: black CR rubber. Working pressure: 20 bar. Vacuum: 0.9 bar. Operating temperature: from -30°C to +85°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSuction and discharge hose intended for the transfer of fuels and liquid products from the petrochemical industry, containing up to 50% aromatic compounds, including gasoline, diesel fuel, and mineral oil. It can be used for tankers, storage tanks, loading stations, and industrial equipment. The hose is widely used in industry and transport under standard working conditions. The inner layer is made of smooth, black, antistatic (R <106 Ω/m) NBR rubber. Reinforcement with synthetic cord and steel spiral. It has two copper wires ensuring electrical continuity between the hose ends – provided there is a proper connection to the ends. The outer layer is made of black SBR/NBR rubber, antistatic (R <106 Ω/m), resistant to abrasion, oil, ozone, and weather conditions. Inner layer: black NBR rubber. Reinforcement: synthetic cord, steel spiral. Outer layer: black SBR/NBR rubber. Working pressure: 10 bar. Vacuum: 0.9 bar. Operating temperature: from -30°C to +85°C (up to +100ºC for oil).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong suction hose designed for the transfer and handling of crude oil, petrochemical products, and drilling cuttings mixed with crude oil (up to 50% aromatic compounds). It can also be used for cement, barite, seawater, and brine. The inner layer is made of black, smooth, antistatic NBR rubber. Reinforced with layers of durable synthetic cord. It features a copper wire ensuring electrical continuity between the hose ends. The outer layer is made of CR chloroprene rubber, flame-retardant, resistant to abrasion, ozone, seawater, and weather conditions. Designed as a specialized OFFSHORE hose for operation on drilling platforms. Widely used on North Sea platforms. Can be successfully used in land applications. Inner layer: black NBR rubber. Reinforcement: synthetic cord. Outer layer: black CR rubber. Working pressure: 20 bar. Operating temperature: from -30°C to +85°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose designed for the transfer of liquid products from the petrochemical industry containing up to 50% aromatic hydrocarbons, fuels, gasoline, diesel, heating oil, lubricating oils, etc. Inner layer made of black, smooth NBR rubber. Reinforcement with synthetic cord. It has copper wires ensuring electrical continuity between the hose ends – provided that it is correctly connected to the fittings. Outer layer made of black NBR rubber, resistant to oil and weather conditions. Relatively low weight and flexible hose construction make it easy to handle, characterized by a wide, universal application for fuel transfer or other compatible media under typical working conditions. Inner layer: black NBR rubber. Reinforcement: synthetic cord. Outer layer: black NBR rubber. Working pressure: 10 bar. Operating temperature: from -30°C to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose for low-pressure parts of hydraulic power systems, compliant with SAE 100 R6 and ISO 4079 R6 standards. Designed primarily for hydraulic fluids based on mineral oil and some synthetic hydraulic fluids. It can also be used for water-based hydraulic fluids as well as for water and air with a temperature limit of +70°C (air applications may require micro-perforation of the outer layer). Suitable for many liquid products in the petrochemical industry: mineral and synthetic oils, diesel and heating oil, ethylene glycol, and others. Not recommended for gasoline and ester-based oils, unsuitable for aromatic hydrocarbons. Inner layer made of black, smooth synthetic rubber. Reinforcement with textile braid. Outer layer made of black synthetic rubber, resistant to abrasion, oil, ozone, and weather conditions. Inner layer: black synthetic rubber. Reinforcement: single textile braid. Outer layer: black synthetic rubber. Working pressure: from 12 bar to 28 bar - depending on the hose diameter. Operating temperature: from -40°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible suction hose designed for the transport of petrochemical products with aromatic compound content up to 50%, fuels, for oil systems, lubrication, etc. Outer layer resistant to fuels, oils, and weather conditions. Inner layer: black NBR rubber. Reinforcement: synthetic braid. Outer layer: black NBR/PVC rubber. Working pressure: 10 or 20 bar. Operating temperature: from -20°C to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery lightweight and flexible suction and discharge hose designed for the transfer of liquid petrochemical products containing up to 30% aromatic compounds (excluding ester-based products). The outer layer is flame-retardant, manufactured according to ASTM C 542 standards, resistant to abrasion, oil, ozone, and weather conditions. Inner layer: black NBR rubber. Reinforcement: synthetic cord, two steel spirals. Outer layer: black CR rubber. Working pressure: 5 bar. Vacuum: 0.5 bar. Operating temperature: from -30°C to +120°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong pressure hose designed for hot oil in hydraulic systems under pressure up to 40 bar. The outer layer is made of blue synthetic rubber, self-extinguishing (in accordance with MSHA requirements), resistant to weather conditions. Standard length: 60 m (or 120 m - contact Tubes International). Inner layer: black synthetic rubber. Reinforcement: synthetic braid. Outer layer: blue self-extinguishing synthetic rubber. Working pressure: 40 bar. Operating temperature: from -30°C to +130°C (temporarily up to +150°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong and flexible suction and discharge hose for low-pressure parts of hydraulic systems, based on the requirements of standard SAE J517 100 R4. Used primarily as a suction and return oil hose. Designed mainly for hydraulic fluids based on mineral oil and some synthetic hydraulic fluids. It can also be used for water-based hydraulic fluids and water with a temperature limit of +70°C. Suitable for the transfer of various liquid products from the petrochemical industry with low aromatic compound content. Not recommended for gasoline, diesel fuel, and oils based on phosphate esters. The inner layer is made of black, smooth, oil-resistant synthetic rubber. The reinforcement consists of synthetic cord layers and a steel spiral providing high resistance to vacuum and very good flexibility of the hose without kinking. The outer layer is made of black synthetic rubber, resistant to abrasion, weather conditions, and light oil exposure. Standard length: 60 m (or 120 m - contact Tubes International). Inner layer: black synthetic rubber. Reinforcement: synthetic cord, steel spiral. Outer layer: black synthetic rubber. Working pressure: from 2 bar to 21 bar - depending on the hose diameter. Operating temperature: from -40°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight and flexible suction hose designed for the transfer of liquid products in the petrochemical industry, containing up to 30% aromatic compounds. It features a copper wire ensuring electrical continuity between the hose ends. The outer layer is resistant to abrasion, oil, and weather conditions. Standard length: 60 m (or 120 m - contact Tubes International). Inner layer: black NBR rubber. Reinforcement: synthetic cord. Outer layer: black synthetic rubber. Working pressure: 10 bar. Operating temperature: from -20°C to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong suction and discharge hose designed for unleaded gasoline, diesel oil, and liquid fuels containing up to 50% aromatic compounds. Used in industry and transportation for the transfer and handling of petrochemical products, in tank trucks, at road and rail loading and unloading terminals for fuels. Inner layer made of black, smooth, antistatic (R ≤ 10^6 Ω) NBR rubber (NBR1). Reinforced with layers of high-strength cord and a steel spiral. Equipped with two copper wires ensuring electrical continuity between the hose ends, provided they are properly connected to the fittings. Outer layer made of black, antistatic (R ≤ 10^6 Ω) synthetic rubber, self-extinguishing, resistant to abrasion, oil, ozone, and weather conditions. Through-wall resistance of the hose R ≤ 10^9 Ω (type M/T). Compliant with standards EN12115:11 (16 bar), EN 1761 (10 bar), ISO 2929 (10 bar), TRbF. Certified for explosion hazard zones Ex (ATEX). Excellent resistance to petrochemical products, strong construction, and antistatic properties of both inner and outer layers, built-in antistatic wires, recommend this hose for demanding applications, including in explosion hazard zones. In any case, however, use in explosion hazard zones (ATEX) should be preceded by a risk analysis conducted by a specialist. A version without wire (type Ω/T) is available upon special request. Inner layer: black, smooth NBR rubber. Reinforcement: synthetic cord, steel spiral. Outer layer: black synthetic rubber. Working pressure: 16 bar. Operating temperature: from -30°C to +90°C (temporarily up to +110°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery strong and flexible, abrasion-resistant suction and discharge hose designed for the pressurized transfer of oils and fuels. A special blend of PVC, PU, and NBR provides high resistance to diesel fuel, biodiesel, and blue oil (fuel used in maritime shipping). Reinforcement with a galvanized steel wire spiral embedded in the inner PVC layer ensures good resistance to vacuum and hose collapse. The smooth inner layer reduces flow losses. Thanks to the braided reinforcement, the hose has high working pressure and low deformation under pressure. Used in the distribution, refueling, and transshipment of oils and fuels, e.g., in tank trucks for heating oil refueling in domestic heating systems. Hoses with diameters of 76 ÷ 102 mm have an external polyurethane layer (significantly increasing abrasion resistance) and a copper antistatic wire. Inner layer: black PVC / PU / NBR. Reinforcement: steel spiral, polyester braid. Outer layer: black PVC / PU / NBR (diameters 19 mm ÷ 63 mm); black PU (diameters 76 mm and above). Operating temperature: from -25°C to +60°C (working pressure dependent on temperature).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible pressure hose for industrial oils, mineral oils, unleaded gasoline (EN 228:2017), diesel fuel (EN 590:2010), heating oil (DIN 51 603 1÷5). Also suitable for compressed air. Inner layer made of black, smooth NBR rubber, antistatic R<106 Ω/m (EN ISO 8031:2009). Reinforcement with textile braid provides a safety factor of 3.15:1. Resistant to slight vacuum up to approximately 0.5 bar. Outer layer made of black, smooth NBR/EPDM rubber compound resistant to oil, ozone, abrasion, and weather conditions. Inner layer: black NBR rubber. Reinforcement: textile braid. Outer layer: black NBR/EPDM rubber. Working pressure: 25 bar. Operating temperature: from -40°C to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible, soft rubber hose with an external braid made of galvanized steel, intended for gasoline and petroleum-based oils such as diesel, heating oil, and lubricating oil. Installed in fuel and oil systems of small vehicles and industrial equipment. Can also be used for water, cooling fluids, non-oxidizing detergents, and air. Based on the requirements of standard DIN 73379. Inner layer made of smooth black NBR rubber. The external reinforcing braid made of galvanized steel provides high pressure resistance. The braid features a black marking stripe. Maximum operating temperature depends on the medium: for gasoline, unleaded gasoline, fuels with up to 50% aromatic hydrocarbon content: +40°C; for diesel oil: +80°C; for water and cooling liquids based on ethylene glycol: +90°C; for air: +80°C; for liquid, non-oxidizing detergents: +80°C. Hose material: black NBR rubber. Reinforcement: external wire braid made of galvanized steel. Working pressure: from 10 bar to 20 bar, depending on the hose diameter. Operating temperature: from -35°C to +80°C (maximum temperature depends on the medium).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible, soft rubber hose with an external textile braid, primarily intended for fuel installations of leaded and unleaded gasoline as well as diesel oil for small vehicles (cars, motorcycles, mopeds, garden tractors) or industrial equipment. Installed, for example, between the fuel pump and the carburetor. Not suitable for engines with fuel injection systems. Can also be used for water, cooling fluids, non-oxidizing detergents, and air. Based on the requirements of standard DIN 73379 type B (03/1982). The inner layer is made of smooth black NBR rubber. The external textile braid vulcanized with rubber reinforces the hose and protects against contact with hot components. The maximum operating temperature depends on the medium: for gasoline, unleaded gasoline, fuels with up to 50% aromatic hydrocarbon content: +40°C; for diesel oil: +80°C; for water and cooling liquids based on ethylene glycol: +90°C; for air: +80°C; for liquid, non-oxidizing detergents: +80°C. Hose material: black NBR rubber. Reinforcement: external black textile braid. Working pressure: 10 bar. Operating temperature: from -35°C to +120°C (temporarily), maximum operating temperature depends on the medium.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery flexible and elastic hose for unleaded gasoline and diesel fuel for passenger cars, trucks, and tractors. Can be used in the engine compartment of trucks. The inner layer is made of black, smooth NBR rubber highly resistant to fuel (oil resistance: RMA class A), suitable for use with most automotive fuels (standard diesel B7 (EN590:2017), biodiesel B20, B100, standard unleaded gasoline E5 (EN228:2017), E10, E85, and E100 - 100% ethanol). Reinforced with a durable textile braid providing a safety factor of 4:1. The outer layer is made of black, smooth, high-quality synthetic rubber resistant to oil, ozone, and weather conditions. Commonly used fuel hose for vehicles. Compliant with SAE J30R2 and SAE J30 R6 standards. Inner layer: NBR rubber. Reinforcement: textile braid. Outer layer: black synthetic rubber. Working pressure: 12 bar. Operating temperature: from -40°C to +100°C externally to +120°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible rubber hose CODAN 3106 designed for leaded and unleaded gasoline. Used for connecting, e.g., the carburetor to the fuel pump in cars, motorcycles, mopeds, garden tractors, etc. Not suitable for engines with fuel injection systems. Based on the requirements of standard DIN 73379 type B (03/1982). Inner layer made of smooth black NBR/PVC rubber compound. Outer braid made of polyester fiber vulcanized with rubber reinforces the hose and protects against contact with hot components. Can also be used for water, cooling fluids, non-oxidizing detergents, air. Maximum operating temperature depends on the medium: for water and cooling liquids based on ethylene glycol: +90°C, for air: +80°C, for liquid non-oxidizing detergents: +80°C, for diesel fuel: +80°C, for gasoline, unleaded gasoline, fuels with up to 50% aromatic hydrocarbons: +40°C. Hose material: black NBR/PVC rubber. Reinforcement: external textile braid (black polyester). Working pressure: from 5 bar to 13 bar, depending on the hose diameter. Operating temperature: from -30°C to +100°C (temporarily), maximum operating temperature depends on the medium.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-quality, multi-layer fuel hose, based on the requirements of standard DIN 73379-3E (11/97). Construction: inner layer made of chemically and thermally resistant Viton (FPM), intermediate layer made of epichlorohydrin (ECO), temperature-resistant and durable aramid fiber braid, outer layer made of epichlorohydrin (ECO) – resistant to temperature, ozone, micro-cracking. The inner layer of Viton provides excellent chemical resistance to hydrocarbons, petrochemical products, as well as many aggressive chemicals and additives used in fuels, even at elevated operating temperatures. Particularly recommended for biodiesel based on fatty acid methyl esters (FAME) such as biodiesel B10, B20, B100. Resistant to methyl ester of rapeseed oil fatty acids (RME). Can be used for biofuels containing ethanol such as E10, E100. Resistant to phosphate esters (which are also additives to liquid fuels). Can also be used for regular diesel, gasoline, mineral oils. Recommended for demanding applications in terms of high fuel purity, temperature resistance, and aging. Characterized by low permeability of hydrocarbons through the hose wall. Inner layer: FPM rubber (Viton). Intermediate layer: epichlorohydrin rubber (ECO). Reinforcement: aramid textile braid. Outer layer: epichlorohydrin rubber (ECO). Working pressure: 10 bar. Operating temperature: from -40°C to +125°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible, suction and discharge hose designed for the transfer of liquid products in the petrochemical industry, containing up to 50% aromatic compounds. The inner layer is antistatic R<106Ω. It features a copper wire ensuring electrical continuity between the hose ends and the dissipation of electrostatic charges. Excellent for transfer systems and, due to the external corrugation, suitable for applications requiring a small bending radius. The outer layer is resistant to abrasion, mineral oils, ozone, aging, weather conditions, and temporary contact with hydrocarbons. Used for fuel tankers and special vehicles for sewer cleaning. Inner layer: black NBR rubber. Reinforcement: synthetic braid, steel spirals. Outer layer: black synthetic rubber. Working pressure: from 10 bar to 16 bar - depending on the hose diameter. Vacuum: 0.9 bar. Operating temperature: from -30°C to +80°C (temporarily up to +120°C depending on the type of medium).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong suction and discharge hose designed for the transfer and handling of hot liquid asphalt, tar, and bituminous products. Used for loading and unloading road and rail tankers, in bitumen production plants, and at ports. Inner layer: black polyacrylic blend. Reinforcement: steel wire cord, steel spiral. Outer layer: black synthetic rubber. Working pressure: 10 bar. Operating temperature: from -15°C to +200°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSuction and discharge hose with extreme flexibility designed for the transfer of liquid products in the petrochemical industry, containing up to 60% aromatic compounds. Suitable for use in tank trucks for transporting diesel fuel, ethanol, gasoline, and oils. Inner layer made of black, smooth Chemigum® rubber (NBR, oil resistance: RMA class A). Reinforcement with synthetic cord and two steel wire spirals. Outer layer, deeply corrugated, made of black synthetic Chemivic® rubber (NBR/PVC), resistant to petrochemical substances, oils, and greases, and abrasion. Features a copper wire ensuring electrical continuity between the hose ends – provided it is properly connected to the fittings. Due to the external corrugation, the hose is extremely flexible, requiring minimal force to bend. Its minimum bending radius is equal to the inner diameter of the hose. The external corrugation also reduces the drag resistance of the hose on the ground, and the lightweight construction facilitates hose handling. Inner layer: black NBR rubber. Reinforcement: synthetic cord, steel spirals. Outer layer: black synthetic Chemivic® rubber. Working pressure: from 10 bar to 17 bar - depending on the hose diameter. Vacuum: 0.9 bar. Operating temperature: from -40°C to +93°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible, soft rubber hose with an external braid made of galvanized steel, intended for gasoline and petroleum-based oils such as gear oil, heating oil, and diesel. Installed in fuel and oil systems of small vehicles and industrial equipment. Can also be used for water, cooling fluids, non-oxidizing detergents, and air. Based on the requirements of standard DIN 73379. Inner layer made of smooth, black NBR rubber. The external reinforcing braid made of galvanized steel ensures high pressure resistance. Hose material: black NBR rubber. Reinforcement: external wire braid made of galvanized steel. Working pressure: from 6 bar to 25 bar - depending on the hose diameter. Operating temperature: from -35°C to +90°C (temporarily 110°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose made of a special PVC blend designed for oils, fuels, and other hydrocarbon-based petrochemical products. The hose material has enhanced resistance to leaching of plasticizers and maintains its flexibility even after prolonged use. It withstands repeated bending while exhibiting excellent aging resistance. Intended for fuel installations: pumps, burners, heating devices, oil systems. Not suitable for aromatic hydrocarbons (benzene, toluene, xylene, etc.). Not recommended for gasoline, especially for intensive use or more demanding applications (in such cases, consider the TECHNOBEL PU hose). Can be used for certain chemical products: diluted acids, bases, and alcohols. Smooth inner and outer surface of the hose and semi-transparent wall allow for visual flow control. Widely used in the automotive industry, assembly plants, plastics industry, woodworking industry, automotive workshops, agriculture, forestry, and municipal services. Inner layer: greenish transparent PVC. Reinforcement: synthetic braid. Outer layer: greenish transparent PVC. Working pressure: from 8 bar to 13 bar, depending on the hose diameter. Operating temperature: from -15°C to +60°C (working pressure dependent on temperature).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible suction and discharge hose designed for the transfer of liquid products in the petrochemical industry. It can be used for diesel fuel and gasoline. The standard CARACAS version is recommended for fuels with up to 30% aromatic hydrocarbons, while the CARACAS 50 version is suitable for more aggressive fuels (up to 50% aromatic compounds). It features a copper wire ensuring electrical continuity between the hose ends. Excellent for transfer systems. The outer layer is resistant to abrasion, oil, ozone, and weather conditions, and due to its corrugation, the hose is very flexible and elastic – its minimum bending radius is only 2.5 times the inner diameter. It is also lightweight and easy to handle. Ideal for transfer systems, fuel tankers in moderately harsh external working conditions. Inner layer: black synthetic rubber. Reinforcement: synthetic braid, steel spirals. Outer layer: black synthetic rubber. Working pressure: 6 bar. Vacuum: 0.6 bar. Operating temperature: from -20°C to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, extremely flexible and pliable PVC hose with a small bending radius, featuring an internal layer of polyurethane (PU, polyester-polyurethane). Due to the good chemical resistance of polyurethane, the hose can be used for gasoline, unleaded gasoline, oils, petroleum products, and many solvents. Suitable for compressed air, including oiled air. Due to the good abrasion resistance of polyurethane, it can also be used for conveying moderately abrasive powders or granules. However, it is not recommended for acids, bases, and aqueous solutions at temperatures above 40ºC. Not suitable for aromatic hydrocarbons (benzene, toluene, xylene, etc.). The hose is widely used in all areas of industry. Also used in agriculture for agricultural spraying (insecticides, pesticides, herbicides, etc.). Used for compressed air for pneumatic tools, spray guns, painting, sandblasting, etc. The outer layer is resistant to hydrocarbons and solvent mists. Suitable for mounting on reels. Inner layer: transparent polyurethane (PU). Reinforcement: polyester braid. Outer layer: black PVC. Working pressure: from 12 bar to 20 bar, depending on the hose diameter and temperature. Operating temperature: from -15°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible, highly flexible hose for the transmission of gasoline and diesel fuel, fire-resistant, for small vessels - recreational boats up to 24 m in length. Hose with a working pressure of 10 bar, produced using a core method. Designed for fuel installations of stationary engines on ships, motorboats, yachts, etc. Suitable for unleaded gasoline, gasoline with up to 10% ethanol (E10 gasoline), diesel fuel, and diesel fuel with 10% FAME esters (B10 - biodiesel). Compliant with ISO 7840 type A1 (fire-resistant, fuel vapor permeability less than or equal to 100 g/m²/24 h), compliant with directive 94/25/EC, certified by RINA, compliant with SAE 1527, USCG type A1. Inner layer made of black, smooth synthetic rubber, resistant to oils and fuels with up to 50% aromatic hydrocarbon content. Reinforced with layers of synthetic cord, and for the POSEIDON LL hose, additionally with a steel spiral. Outer layer made of black, self-extinguishing synthetic rubber, resistant to oil and weather conditions (fire resistance: ISO 7840 Annex A: hose filled with fuel should withstand flame for 2.5 min). POSEIDON: The POSEIDON hose is a soft pressure hose without reinforcement with a steel spiral. The manufacturer recommends installing POSEIDON hoses with a diameter of over 19 mm in straight sections or with a gentle (large) bend radius. The hose is particularly used in the fuel tank filling installation of boats. POSEIDON hose with smaller diameters of 6, 8, 10, 13, 16, and 19 mm, with a working pressure of 10 bar, is available on special order. POSEIDON LL: The POSEIDON LL hose additionally has reinforcement with a steel spiral, providing resistance to vacuum and kinking. The hose is very flexible, with a minimum bend radius corresponding to just three times the inner diameter and can be easily installed in tight spaces of the boat's engine compartment. Its versatility and high quality make it frequently used by manufacturers of larger motor yachts. Standard length: 60 m (or 120 m - contact Tubes International). Inner layer: black synthetic rubber. Reinforcement: synthetic cord (POSEIDON); synthetic cord, steel spiral (POSEIDON LL). Outer layer: synthetic rubber. Working pressure: 10 bar. Operating temperature: from -30°C to +100°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight and flexible suction and discharge hose made of a special oil-resistant PVC blend. Designed for the transfer of mineral oils and hydrocarbons as well as industrial water, wastewater, liquid fertilizers, and certain chemicals – particularly where enhanced PVC resistance to hydrocarbons is required. Not suitable for aromatic hydrocarbons (benzene, toluene, xylene, etc.). Can be used for some chemical products – diluted acids, bases, and alcohols. The hose maintains its flexibility even at negative working temperatures, and its lightweight and small bending radius ensure convenience and ease of handling. Reinforced with a hard PVC spiral, impact-resistant, providing very good vacuum resistance and preventing hose collapse. Smooth inner and outer surface. Resistant to UV radiation, ozone, weather conditions, and abrasion. Widely used in industry, agriculture, construction, and roadworks. As a hose reinforced with a hard PVC spiral (without a braid), it exhibits some elongation under pressure, which should be considered in applications, especially at temperatures above 40°C. Hose material: blue PVC. Reinforcement: white hard PVC spiral. Working pressure: from 2 bar to 5 bar - depending on the hose diameter. Working temperature: from -25°C to +60°C.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsReinforced rubber hose with a galvanized steel braid providing high pressure resistance, perfectly suited for oil installations in small vehicles, fuel systems, and industrial equipment. Designed for gasoline and petroleum-based oils such as gear oil, heating oil, or diesel. The inner layer made of NBR rubber combined with a mesh braid makes the hose both soft and flexible. The maximum operating temperature depends on the medium: for gasoline, unleaded gasoline, fuels with up to 50% aromatic hydrocarbons: +40°C; for diesel: +80°C; for water and coolant liquids based on ethylene glycol: +90°C; for air: +80°C; for liquid, non-oxidizing detergents: +80°C. Inner layer: smooth, black NBR rubber. Reinforcement: external wire braid made of galvanized steel. Working pressure: from 20 bar to 25 bar - depending on the hose diameter. Operating temperature: from -35°C to +90°C (maximum operating temperature depends on the medium).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible hose designed for the transmission of industrial oils, mineral oils, diesel fuel (EN 590:2010), biodiesel, and heating oil (DIN 51 603 1÷5) under higher pressure. Also suitable for compressed air and glycol-based coolants. The inner layer is made of black, smooth NBR rubber, antistatic R<106 Ω/m (EN ISO 8031:2009). Reinforcement with durable textile braid provides a safety factor of 4:1. Resistant to slight vacuum up to approximately 0.6 bar. The outer layer is made of black, smooth SBR/NVC rubber (NVC - a blend of NBR and PVC) and is resistant to oil, ozone, and weather conditions. Inner layer: black NBR rubber. Reinforcement: polyester braid. Outer layer: black SBR/NVC rubber. Working pressure: 40 bar. Operating temperature: from -45°C to +100°C for fuels and oils, from -45°C to +70°C for air.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSoft, flexible, extruded suction hose for the transfer of gasoline and diesel fuel at low pressure, fire-resistant, for small vessels - recreational boats up to 24 m in length. Designed for fuel installations of stationary engines on ships, motorboats, yachts, etc. Suitable for unleaded gasoline, gasoline with up to 10% ethanol (E10 gasoline), diesel fuel, and diesel fuel with 10% FAME esters (B10 - biodiesel). Compliant with ISO 7840 type A1 (fire-resistant, fuel vapor permeability less than or equal to 100 g/m²/24 h), compliant with directive 94/25/EC, certified by RINA, compliant with SAE 1527, USCG type A1. Inner layer made of black, seamless synthetic rubber, resistant to oils and fuels with up to 50% aromatic hydrocarbon content. Reinforcement with synthetic textile braid. Outer layer made of black, fire-resistant, seamless synthetic rubber, resistant to aging, lubricants, weather conditions, and temperature (fire resistance: ISO 7840 Annex A: hose filled with fuel should withstand flame for 2.5 min). Inner layer: black synthetic rubber. Reinforcement: synthetic braid. Outer layer: black synthetic rubber. Working pressure: from 2.5 bar to 3.4 bar - depending on hose diameter. Operating temperature: from -20°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery strong fuel transfer hose for aviation fuel, designed for direct pressure refueling of aircraft on the ground. It can also be used in fuel transfer operations in airport tankers – dispensers, in operations not requiring high vacuum. Specifically designed for kerosene (aviation fuel - fuel for turbine aircraft engines, e.g., JET A1), aviation gasoline, and fuels with aromatic hydrocarbon content up to 50%. Can be used on drum reels. Inner layer made of black, smooth, antistatic NBR rubber. Reinforcement with layers of high-strength synthetic cord. Outer layer made of black, antistatic, self-extinguishing chloroprene (CR) rubber, resistant to abrasion, contact with hydrocarbons, and weather conditions. Antistatic outer layer, in accordance with EN ISO 1825 requirements, ensures the required low resistance of the hose between the ends (103 Ω ‹ R ‹ 106 Ω, ISO 8031). Compliant with requirements for aviation fuel hoses (type C/Ω) EN ISO 1825, EN 1361, BS 3158, EI 1529. Inner layer: black NBR rubber. Reinforcement: synthetic cord. Outer layer: black CR rubber. Working pressure: 20 bar. Operating temperature: from -30°C to +70°C (for aviation fuel according to EN 1825).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible, soft rubber hose with an external stainless steel braid, designed for gasoline and petroleum-based oils such as diesel, heating oil, and lubricating oil. Installed in fuel and oil systems of small vehicles and industrial equipment. Can also be used for water, cooling fluids, non-oxidizing detergents, and air. Based on the requirements of standard DIN 73379. Inner layer made of smooth black NBR rubber. The external reinforcing braid made of stainless steel provides high pressure resistance and is corrosion-resistant. Maximum operating temperature depends on the medium: for gasoline, unleaded gasoline, fuels with up to 50% aromatic hydrocarbon content: +40ºC; for diesel: +80ºC; for water and ethylene glycol-based cooling liquids: +90ºC; for air: +80ºC; for liquid, non-oxidizing detergents: +80ºC. Inner layer: black NBR rubber. Reinforcement: external wire braid made of stainless steel AISI 304. Working pressure: from 10 bar to 20 bar - depending on the hose diameter. Operating temperature: from -35°C to +80°C (maximum operating temperature depends on the medium).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong, abrasion-resistant suction hose designed specifically for the transfer of fuels, other liquid hydrocarbons, or for use as a general-purpose antistatic hose. Lighter and more flexible than standard rubber hoses, it has buoyancy (remains on the surface) in fresh and saltwater. Flat when at rest, which facilitates handling and storage. Intended for the transfer and transshipment of petrochemical products, oils, and fuels in refineries, industry, and transportation. Used for fueling ships, cleaning tanks, firefighting, and military applications. Meets the requirements of MIL-PRF-370J for liquid fuel hoses. Antistatic - features two externally longitudinally arranged copper wires ensuring electrical continuity between the hose ends easily accessible for proper connection to fittings (R < 0.02 Ω/m, exceeds the requirements of MIL-PRF-370J). The inner surface of the hose is smooth, causing no flow loss. Resistant to abrasion, weather conditions, hydrolysis, ozone, fuels, and commonly used chemicals (recommended pH range: 5 to 9). Resistant to longitudinal loads during unwinding and dragging. Hose material: polyurethane (PUR) embedded in the braid during the hose extrusion process. Working pressure: from 7 bar to 11 bar - depending on the hose diameter (the specified working pressure for fuel). Operating temperature: from -50°C to +50°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong suction hose designed for unleaded gasoline, diesel oil, and liquid fuels containing up to 50% aromatic compounds. Used in industry and transportation for the transfer and handling of petrochemical products, in tank trucks, at road and rail loading and unloading terminals for fuels. Inner layer made of black, smooth, antistatic (R ≤ 10^6 Ω) NBR rubber (NBR1). Reinforced with layers of high-strength cord. Equipped with two copper wires ensuring electrical continuity between the hose ends, provided that they are properly connected. Outer layer made of black, antistatic (R ≤ 10^6 Ω) synthetic rubber, self-extinguishing, resistant to abrasion, oil, ozone, and weather conditions. Wall resistance across the hose R ≤ 10^9 Ω (type M/T). Compliant with standards EN12115:11 (16 bar), EN 1761 (10 bar), ISO 2929 (10 bar), TRbF. Excellent resistance to petrochemical products, strong construction, and antistatic properties of both inner and outer layers, built-in antistatic wires, recommend this hose for demanding applications, including in explosion hazard zones. In any case, however, use in explosion hazard zones (ATEX) should be preceded by a risk analysis conducted by a specialist. A version without wire (type Ω/T) is available on special order. Inner layer: black, smooth NBR rubber. Reinforcement: synthetic cord. Outer layer: black synthetic rubber. Working pressure: 16 bar. Operating temperature: from -30°C to +90°C (temporarily up to +110°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong suction hose for oils and fuels. Lighter and more flexible than standard rubber hoses. Flat at rest, facilitating handling and storage. Designed for the transfer and loading of petrochemical products, oils, and fuels in refineries, industry, and transportation. Used for fueling ships, cleaning tanks, firefighting, and military applications. The hose is constructed with a high-strength polyester-polyamide braid, fully embedded in an NBR/PVC compound. It features copper wires ensuring electrical continuity between the hose ends—provided proper connection to the fittings. The inner surface of the hose made of NBR/PVC is smooth, causing no flow loss, while the outer surface made of NBR/PVC is slightly longitudinally ribbed, enhancing abrasion resistance and protection against contact with hot elements. Externally resistant to abrasion, ozone, weather conditions, oil, fuels, and a wide range of chemicals. Does not require cleaning and drying. Resistant to longitudinal loads—during unwinding and pulling (the longitudinal force should never exceed 1/3 of the specified breaking strength; the installation of fittings should consider the longitudinal force). Standard color is greenish-gray (army green). Hose material: greenish-gray NBR/PVC compound embedded in a polyester-polyamide braid during the hose extrusion process. Working pressure: from 16 to 20 bar, depending on the hose diameter. Operating temperature: from -20°C to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible, soft fuel hose made of special NBR rubber resistant to methyl ester of fatty acid rapeseed oil (RME). Reinforcement with synthetic textile braid. Outer layer made of chloroprene rubber (CR), antistatic, self-extinguishing, resistant to abrasion, temperature, and aging. Particularly recommended for biofuels based on methyl esters of fatty acids (FAME) such as biodiesel B10, B20, B100. Resistant to methyl ester of fatty acid rapeseed oil (RME). Can also be used for regular diesel fuel. Inner layer: special NBR rubber. Reinforcement: synthetic textile braid. Outer layer: CR rubber. Working pressure: 15 bar. Operating temperature: from -30°C to +100°C (temporarily up to +120°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong suction and discharge hose designed for the transport and handling of crude oil, petrochemical products, and drilling cuttings mixed with crude oil (up to 50% aromatic compounds). Inner layer made of black, smooth NBR/PVC rubber blend. Reinforced with layers of durable synthetic cord and steel spiral. It has copper wires ensuring electrical continuity between the hose ends – provided that it is properly connected to the fittings. Outer layer made of CR chloroprene rubber, flame-retardant, resistant to oil, seawater, abrasion, and weather conditions. Designed as a specialized OFFSHORE hose for operation on drilling platforms. Widely used on North Sea platforms, successfully utilized in land applications. Higher working pressure versions (20 / 27 / 30 / 35 bar) available on special order, with specified breaking strength under tension (up to 2T for 2”, 4T for 3”, and 7T for 4”, 5”, and 6”) and ABS type approval for the complete hose. Inner layer: black NBR/PVC rubber. Reinforcement: synthetic cord, steel spiral. Outer layer: black CR rubber. Working pressure: from 17 bar to 20 bar - depending on the hose diameter. Operating temperature: from -20°C to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSuction and discharge hose intended for the transfer of aviation fuel (jet fuel, kerosene, e.g., Jet A1) and petrochemical products containing up to 50% aromatic compounds, primarily for draining fuel from aircraft tanks, loading and unloading airport tankers and fuel dispensers. The outer layer is antistatic, abrasion-resistant, oil-resistant, and weather-resistant. It features copper wires ensuring electrical continuity (R < 100 Ω) between the hose ends and dissipation of electrostatic charges. Compliant with requirements for aviation fuel hoses (type E/M) ISO 1825, API 1529:05, AS 2683, VG 95955, NFPA 407. Inner layer: black NBR rubber. Reinforcement: synthetic cord, steel spiral. Outer layer: black synthetic rubber. Working pressure: 20 bar. Vacuum: 0.85 bar. Operating temperature: from -25°C to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery strong suction-discharge hose for aviation fuel, intended for filling and emptying aircraft tanks, loading and unloading airport tankers and fuel dispensers. As a hose without metal components, it can be used for direct filling and emptying of aircraft tanks. It can be wound on reels. Suitable for aviation fuel for turbine engines (aviation kerosene, e.g., Jet A1), aviation gasoline, and fuels with aromatic hydrocarbon content up to 50%. Inner layer made of black, smooth NBR rubber. Reinforcement with layers of high-strength synthetic cord and a polymer spiral (PET). Outer layer made of black, antistatic synthetic rubber, resistant to abrasion, weather conditions, and contact with oil. Antistatic outer layer ensures the required low resistance of the hose between the ends (10^3 Ω < R < 10^6 Ω, ISO 8031). Compliant with requirements for aviation fuel hoses (type F/Ω) API 1529:05, AS 2683, VG 95955, NFPA 407. Other diameters and hoses with fluorescent markings visible at night are available upon special order. Inner layer: black NBR rubber. Reinforcement: synthetic cord, PET spiral. Outer layer: black synthetic rubber. Working pressure: 20 bar. Operating temperature: from -25°C to +70°C.
