Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, single-layer, highly flexible and elastic hose designed for the extraction of hot vapors, smoke, gases, blowing, and the discharge of cooling air. Chemically resistant, UV resistant, and aging resistant. Used, among others, for hot air in granulate dryers and film blowers in plastic processing, in paint dryers in printing houses, other industrial dryers, in the electronics industry, in vehicles and engines for cooling air, incinerators, as well as for the extraction of exhaust gases and welding gases. Smooth inside (when straightened), with a very small bending radius allowing easy installation in tight spaces of equipment and vehicles. Mounted with clamps. Other diameters and lengths, soft ends of sections, etc., available on special order. Hose material: glass fabric impregnated with black CR rubber (Neoprene® - chloroprene rubber). Reinforcement: internal spiral of steel wire, external strand of fiberglass. Operating temperature: from -35°C to +135°C (temporarily up to +150°C).- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible hose designed for hydraulic oil installations, gases, air, fuels, water-based fluids. Standards: SAE 100R8, ISO 3949-R8. Inner layer: polyester. Reinforcement: double aramid braid. Outer layer: micro-perforated polyurethane. Working pressure: from 145 bar to 420 bar, depending on hose diameter. Operating temperature: from -40°C to +100°C (for water and air up to +70°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDurable, lightweight, and flexible suction and discharge hose designed specifically for the wine industry for heavier working conditions. Stronger than the LUISIANA hose, with a thicker wall. Hose for demanding applications. Intended for the transfer of water, beer, quality wines, and alcohols with a concentration of up to 20%, juices, beverages, and other food products. Free of phthalates. Not recommended for milk and its derivatives, oils, and fatty food substances. Reinforced with a hard PVC spiral, resistant to impact, provides very good resistance to vacuum and hose collapse. The transparent wall allows for easy visual monitoring of flow. The smooth inner surface reduces flow losses and ensures ease of cleaning. In applications not involving direct contact with food (in industry, construction, agriculture), it can be used: 1) for light chemicals, water, sludges, and wastewater, other liquids (without fats, oils, and hydrocarbons); 2) for air, vacuum transfer of dust, powders, granules, and other lightly abrasive bulk materials (non-fatty). Abrasiveness and potential static electricity issues should be considered. Standards and requirements: Food industry, contact with food - compliant with European requirements 1935/2004/EC and 10/2011/EU (simulative fluids A, B, and C), 2023/2006/EC (GMP). Hose material: transparent PVC. Reinforcement: hard PVC spiral. Operating temperature: from -5°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose designed for the removal of dust, wood shavings, and chips in the woodworking and furniture industry. Designed for CNC machines for wood and plastic processing: machining centers, vertical milling machines, milling plotters. The thick steel spiral coated with white PVC is corrosion-resistant, has good adhesion to the hose material, and provides high pressure parameters. Despite its strong construction, due to the optimally selected large spiral pitch, it is very flexible, bendable, and compressible. Particularly recommended for dust and chip extraction from rapidly moving working heads (CNC Router Dust Collection System). Resistant to microbes, hydrolysis, as well as oils and gasoline. Does not contain halogen compounds and plasticizers. Flame-retardant, compliant with the German standard DIN 4102 class B1. The hose can be treated as electrically conductive after grounding the spiral, in accordance with German industrial recommendations BGI 739-2. Installation on couplings with bridge clamps (right-handed). Other diameters in the range of 80 ÷ 600 mm available on special order. Hose material: transparent polyester-polyurethane. Reinforcement: steel wire spiral coated with white PVC. Operating temperature: from -40°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible hose designed for hydraulic oil installations, gases, air, fuels, water-based fluids. Standards: SAE 100R7, ISO 3949-R7. Inner layer: polyester. Reinforcement: double polyester braid. Outer layer: micro-perforated polyurethane. Working pressure: from 70 bar to 230 bar, depending on hose diameter. Operating temperature: from -40°C to +100°C (for water and air up to +70°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, highly flexible suction and discharge hose designed for water-cooled exhaust systems of diesel engines in motorboats and yachts (free discharge of mixed exhaust gases and cooling water). Used in short sections between installation pipes. Inner layer resistant to exhaust gases. Outer layer resistant to fire and weather conditions. Has vacuum resistance. Compliant with Lloyds type certificate 99/00169 (E4), homologated by VTT according to Nordic Boat Standard MC9. Inner layer: black synthetic rubber CR. Reinforcement: synthetic cord, steel spiral. Outer layer: black, corrugated synthetic rubber CR. Burst pressure: ≥ 2 bar. Operating temperature: from -30°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, exceptionally flexible and bendable hose with good chemical resistance and UV radiation resistance. Resistant to hydrolysis and biological corrosion. Free of halogen compounds and plasticizers. Designed for the discharge of air, vapors, and gases. Used in the chemical industry and in ventilation and air conditioning systems in vehicles. Other diameters available in the range of 30 to 610 mm. Chemical resistance verification - chemical resistance table for polypropylene (preliminary selection), confirmation of resistance and application conditions - by Tubes International. Hose material: black soft polypropylene (PP). Wall thickness: 0.4 mm. Reinforcement: steel wire spiral. Operating temperature: from -20°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible hose in a double version (two hoses with a welded outer layer) designed for hydraulic oil installations, gases, air, fuels, water-based fluids. Standards: SAE 100R7, ISO 3949-R7. Inner layer: polyester. Reinforcement: double polyester braid. Outer layer: micro-perforated polyurethane. Working pressure: from 140 bar to 210 bar, depending on the hose diameter. Operating temperature: from -40°C to +100°C (for water and air up to +70°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSuction and pressure hose designed for the transfer of various light alcoholic products such as beer, wine, cider, and non-alcoholic beverages. The inner layer is completely free of phthalates, plasticizers, and animal-derived components, eliminating the risk of medium contamination and bacterial growth. The outer layer is abrasion-resistant with good aging resistance. Standards and requirements: 1) General EU 2015/863 (RoHS 3), EC 1907/2006 (REACH). 2) Food industry, food contact 1935/2004/EC, 2023/2006/EC (GMP). Inner layer compliant with FDA 21 CFR 177.2600, D.M. 21/03/73. Inner layer: white bromobutyl rubber (BIIR). Reinforcement: synthetic cord, steel spiral. Outer layer: red EPDM rubber. Working pressure: 10 bar. Vacuum: 0.9 bar. Operating temperature: -40°C to +120°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, highly flexible hose designed for the transport of dust, wood shavings, chips, and lightweight abrasive bulk materials. Used in the woodworking, construction, and food industries. Ozone resistant. Wall thickness is measured between the spiral. Other diameters available in the range of 20 to 600 mm. Hose material: transparent polyurethane. Reinforcement: copper-plated (L/R version) or galvanized (L version) steel wire spiral. Operating temperature: from -40°C to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible hose designed for solvents, paints, isocyanates, polyols, gases, air, water-based fluids. Inner layer: polyamide. Reinforcement: steel braid. Outer layer: microperforated polyurethane. Operating temperature: from -40°C to +93°C (for water and air up to +65°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight suction and discharge hose designed for the transfer of milk and its products as well as food substances requiring the use of odorless and tasteless rubber. It contains no phthalates, plasticizers, or animal-derived products. The inner layer is resistant to commonly used cleaning agents and processes in the food industry. The special "CRUSH PROOF" hose construction allows the hose to return under pressure to its original shape after being accidentally run over, for example, by a forklift. The hose is lightweight and easy to handle. Particularly recommended for applications requiring a small bending radius. It retains its flexibility even at low temperatures. Standards and requirements: 1) General: EC 2002/95 (RoHS), EC 1907/2006 (REACH). 2) Food industry, food contact: EC 1935/2004, EC 2023/2006 (GMP). Inner layer compliant with D.M. 21/03/73, FDA 21 CFR 177.2600, BfR, RAL (German Institute for Quality Assurance and Certification). Inner layer: white, smooth NR/NBR rubber. Reinforcement: synthetic cord, plastic spiral. Outer layer: blue synthetic rubber. Working pressure: 6 bar. Operating temperature: from -30°C to +85°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, very flexible and bendable hose designed for the discharge of paint vapors, solvents, contaminated air, and dust in explosion hazard areas. Also used for air transmission in biogas plants. Permanently antistatic (R ≤108 Ω), compliant with technical standard TRGS 727 and standard TRAS120 for biogas plants. Resistant to hydrolysis and biological corrosion. Maintains flexibility at low temperatures, flame-retardant - meets the requirements of standard DIN 4102 B1 regarding the fire properties of building materials. Other diameters in the range of 20 ÷ 800 mm available on special order. Chemical resistance check - chemical resistance table for PVC (preliminary selection), confirmation of resistance and application conditions - by Tubes International. Hose material: polyester fabric impregnated with black PVC. Wall thickness: 0.4 mm. Reinforcement: steel wire spiral. Operating temperature: from -40°C to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong, flexible, resistant to kinks suction and discharge hose with a black corrugated outer layer, designed for the transmission of hot, dry air from the compressor to the tank installation. Ideal for situations where a small bending radius is required. Used in road tankers for transporting bulk materials: cement trucks, feed trucks, etc., as well as in other industrial installations. The outer layer is resistant to ozone and weather conditions. For a diameter of 90 mm available in 2 m sections with soft, spiral-free ends. Inner layer: white EPR rubber. Reinforcement: synthetic braid, steel spiral. Outer layer: black corrugated EPDM rubber. Working pressure: up to 10 bar. Operating temperature: from -40°C to +200°C (temporarily up to +240°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, highly flexible and bendable, chemically resistant and flame-retardant hose designed for use in air conditioning, ventilation, and heating systems. For the extraction and transmission of hot air, chemically aggressive vapors, exhaust gases, and gases in ventilation and heating systems. It has resistance to UV, ozone, and weather conditions. Used in vehicle equipment, engines, and the chemical industry. Characterized by high compressibility - up to 1:6, strong construction resistant to vibrations and stretching, and impact resistance due to the external spiral. Also available with a stainless steel spiral (from a diameter of 80 mm). Hose installation on couplings with bridge clamps (left-handed). Chemical resistance verification - chemical resistance table for CSM (preliminary selection), confirmation of resistance and application conditions - by Tubes International. Standard length: from 2 to 10 m. Hose material: externally black polyester fabric coated with CSM - Hypalon. Reinforcement: external spiral made of galvanized steel wire and sheet. Operating temperature: from -35°C to +175°C (temporarily up to +190°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible hose designed for solvents, paints, isocyanates, polyols, water-based fluids. Micro-perforated on request (for gases and air). Inner layer: polyamide. Reinforcement: double steel braid. Outer layer: polyurethane. Operating temperature: from -40°C to +100°C (for water and air up to +70°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong suction and discharge hose designed for the transport of dry abrasive substances. The inner layer is smooth, antistatic, and highly resistant to abrasion (50±5 mm³ according to ISO 4649, formerly DIN 53516). Built-in copper wire that, when grounded (or connected to a grounded end), dissipates electric charges. The outer layer is resistant to weather conditions and ozone. The hose is intended for the transport of dry, highly abrasive substances: cement, sand, gravel, etc. Inner layer: black NR/SBR rubber. Reinforcement: synthetic cord, steel spiral. Outer layer: black EPDM rubber. Working pressure: 6 bar. Vacuum: from 0.8 bar to 0.9 bar - depending on the hose diameter. Operating temperature: -30°C to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible hose in a double version (two hoses with a welded outer layer) designed for hydraulic oil installations, gases, air, fuels, water-based fluids. Standards: DIN 24951, SAE 100R7, ISO 3949-R7. Outer layer: micro-perforated polyurethane. Working pressure: from 157 bar to 215 bar, depending on the hose diameter. Operating temperature: from -40°C to +93°C (for water and air up to +65°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible, and smooth interior hose with a white spiral, designed for the removal of dust, chips, fibers, and lightweight bulk materials in the paper, textile, and wood industries. It retains its flexibility and bendability even at low temperatures. The dense steel spiral coated with white PVC ensures high pressure parameters, is resistant to corrosion, and has good adhesion to the hose material. The hose has good resistance to abrasion, oils, and gasoline. Installation on couplings - with bridge clamps (right-handed). Other diameters available upon request. Versions: P1 N PU – standard with high abrasion resistance; P1 N PU AS – antistatic (R ≤ 108 Ω), compliant with TRBS 2153 and for extraction also with TRGS 727, resistant to microbes and hydrolysis; P1 N PU EL – electrically conductive (R ≤ 104 Ω), compliant with ATEX 2014/34/EU, TRBS 2153 and for extraction also with TRGS 727, can be used in explosion hazard zones (after conducting a risk assessment). Hose material: transparent polyester-polyurethane (P1 N PU), transparent polyether-polyurethane (P1 N PU AS), black polyether-polyurethane (P1 N PU EL). Reinforcement: steel wire spiral coated with PVC. Wall thickness measured between the spiral: 0.5 mm and 0.6 mm from diameters of 100 mm. Operating temperature: from -40°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery strong, thick suction-discharge hose designed for the transport of a wide range of wet and dry abrasive substances. The thick inner layer is smooth, antistatic, and abrasion-resistant (70 mm³ according to ISO 4649, formerly DIN 53516). Built-in copper wire that, when grounded (or connected to a grounded end), dissipates electric charges. The outer layer is corrugated, weather-resistant, and ozone-resistant. The hose is intended for the transport of abrasive substances mixed with water as well as dry materials: cement, sand, gravel, seeds, etc. Suitable for heavy-duty applications. It can be bent to a relatively small bending radius, but its deflection requires considerable force. It can also be easily cut into sections directly at the place of use and fitted with special PN10 flange fittings (applied to the outer surface of the hose). Used in many applications, e.g., for the transshipment of bulk materials in ports, for the transport of excavated material in mining, in the chemical industry, in construction during demolition work, for suction and transport of water and sludge in dewatering operations, in gravel and sand pits, in dredging and reclamation work. Installation: the hose is designed for installation using the VOLGA FRA system – aluminum half-flanges PN10 applied externally to the hose. Inner layer: black NR/SBR rubber. Reinforcement: synthetic cord, steel spiral. Outer layer: black EPDM rubber. Working pressure: 10 bar. Vacuum: 0.9 bar. Operating temperature: from -40°C to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible, antistatic (R<3x104 Ω/m) hose designed for solvents, paints, isocyanates, polyols, gases, air, water-based fluids. Standards: ISO 8031, SAE 100R8, ISO 3949-R8. Inner layer: polyamide. Reinforcement: double aramid braid with conductive fibers. Outer layer: microperforated polyurethane. Operating temperature: from -40°C to +100°C (for water and air up to +70°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, gray in color, very flexible and pliable, chemically resistant and flame-retardant hose intended for use in air conditioning, ventilation, and heating systems. It features high compressibility - up to 1:6, a strong construction resistant to vibrations and stretching, and impact resistance due to the external spiral. Also available in other colors and with a stainless steel spiral (from a diameter of 80 mm). AS version – antistatic (R ≤109 Ω) - made in black. Hose installation on couplings with bridge clamps (left-handed). Chemical resistance check: PVC chemical resistance table (preliminary selection), confirmation of resistance and application conditions by Tubes International. Standard length: from 2 to 10 m - contact Tubes International. Hose material: gray polyester fabric impregnated with PVC. Reinforcement: external spiral made of galvanized steel wire and sheet. Operating temperature: from -20°C to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose intended for filling gas cylinders. Odorless inner layer compliant with FDA 21 CFR requirements, Directive 2011/10/EU, and CGA G-7.1-2004 (for breathing air). Not to be used for explosive gases, e.g., oxygen, hydrogen. Installation: use fittings type Z. Inner layer: polyester. Reinforcement: aramid braid. Outer layer: microperforated polyurethane. Operating temperature: from -40°C to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong suction and pressure hose designed for the transfer of dry or liquid abrasive substances, granules, etc. Externally corrugated, internally smooth. The inner layer is made of transparent, abrasion-resistant polyurethane, with a thickness ranging from 0.6 mm (DN30) to 1 mm (DN100). The hose features a copper wire arranged in a spiral along its length, which discharges electric charges when grounded or connected to an end fitting. Widely used in plastic processing in applications requiring higher resistance to abrasion, puncturing, and cutting of the hose. Particularly recommended for plastic regenerates with relatively sharp edges. Standards and requirements: food industry, contact with food: compliant with European regulations 1935/2004/EC and 10/2011/EU (simulant fluids A, B, and C), 2023/2006/EC (GMP) – applihose to liquid food substances. Inner layer: transparent polyurethane. Outer layer: transparent PVC. Reinforcement: hard PVC spiral. Working pressure: from 3 bar to 5 bar, depending on the hose diameter and temperature. Vacuum: up to 0.7 bar. Operating temperature: -10°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible, and elastic hose designed for the extraction of hot vapors, smoke, gases, dust, cooling air discharge, and blowing. Flame-retardant, resistant to temperature, UV radiation, ozone, and aging. Used in all areas of industry for high-temperature applications, including extraction from furnaces in the metallurgical industry, foundries, glass, and ceramic industries. Characterized by high compressibility, strong construction resistant to vibrations and stretching, and impact resistance due to the external spiral. Other diameters available upon special request in the range of 50 to 508 mm. Hose installation on couplings with bridge clamps (left-handed). Standard length: 3 m (also available in lengths of 6 and 10 m upon special request). Hose material: glass fabric impregnated with silicone (silver-gray), with a thickness of 0.4 mm. Reinforcement: external spiral made of galvanized steel wire and sheet. Operating temperature: from -60°C to +300°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible hose designed for hydraulic oil installations, fuels, water-based fluids. Available on request in micro-perforated version (for gases and air). Inner layer: polyester. Reinforcement: steel braid. Outer layer: polyurethane. Working pressure: from 70 bar to 325 bar, depending on hose diameter. Operating temperature: from -40°C to +100°C (for water and air up to +70°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsRectangular corrugated hose reinforced with a steel spiral, for hot water and antifreeze fluids, intended for automotive and industrial cooling systems. It has vacuum resistance. Inner layer resistant to heat and cooling fluids. Outer layer resistant to overheating, oil, and aging. Inner layer: black CR rubber. Reinforcement: synthetic cord, steel spiral. Outer layer: black CR rubber. Working pressure: up to 4 bar. Operating temperature: from -40°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThree-layer suction hose with a specific construction designed for the discharge of very hot (up to 1100°C) gases, vapors, smoke, and air. The outer layer of impregnated glass fabric with stainless steel threads provides mechanical strength, the middle thick high-temperature fabric serves as insulation, and the inner very fine stainless steel mesh separates the flow of hot gases. Flame retardant, resistant to hot sparks to some extent. Used with furnaces and engines for the extraction of very high-temperature gases in the metallurgical, ceramic, shipbuilding, aerospace, automotive, and military equipment industries. The hose has a strong construction and is resistant to damage due to the external spiral. Used exclusively as a suction hose operating under vacuum, due to the possibility of gas permeation outside under pressure (degassing). Hoses with a small internal diameter < 100 mm feature a so-called double-hose construction (the inner mesh layer constitutes a separate hose with a spiral). Hose installation on couplings with left-handed bridge clamps. Standard length: from 2 to 10 m - depending on the diameter. Hose material: 3 layers: externally impregnated glass fabric with stainless steel fibers (gray), middle layer - high-temperature insulating fabric, inside fine mesh - stainless steel. Reinforcement: external spiral made of wire and sheet metal from stainless steel. Operating temperature: from -50°C to +1100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery lightweight, flexible, and highly bendable hose designed for the discharge of chemically aggressive vapors and gases in all industrial sectors. Excellent chemical resistance, high temperature resistance. The hose features high compressibility and impact resistance due to the external spiral. Resistant to UV radiation, ozone, aging, weather conditions, and is flame-retardant. Other diameters available in the range of 50 ÷ 508 mm and a version with a stainless steel spiral. Hose installation on couplings with bridge clamps (left-handed). PTFE EL CL version - electrically conductive hose with resistance R ≤106 Ω, compliant with ATEX Directive 94/9/EC and standard TRBS 2153, made of black PTFE. Chemical resistance verification - chemical resistance table for PTFE (preliminary selection), confirmation of resistance and application conditions - by Tubes International. Standard length: 3 or 6 m. Hose material: light brown glass fabric coated with Teflon (PTFE), thickness 0.12 mm - standard PTFE CL version, glass fabric coated with black conductive Teflon (PTFE), thickness 0.15 mm - antistatic PTFE EL CL version. Reinforcement: external spiral made of galvanized steel wire and sheet. Operating temperature: from -150°C to +250°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible hose designed for hydraulic oil installations, fuels, water-based fluids. For use near transformers and medium and high voltage electrical installations. Non-conductive - leakage during testing according to standards less than 50 µA for voltage 246 kV/m for 5 minutes. Standards: DIN 24951, SAE 100R7, ISO 3949-R7. Inner layer: polyester. Reinforcement: double polyester braid. Outer layer: orange polyurethane. Working pressure: from 157 bar to 220 bar, depending on hose diameter. Operating temperature: from -40°C to +93°C (for water up to +65°C).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsCoolant hose in the system 3/4" made of corrosion-resistant acetal, resistant to solvents, oils, and greases, providing rigidity and elasticity of the hoses. Designed for low-pressure transmission of air, water, oils, and other substances used in cooling processes and metalworking. Resistant to abrasion and vibrations, ensuring 100% positional stability and does not cause damage to cutting tools. Very easy to expand modular construction. Available lengths: 2x145 mm, 100 mm, 200 mm, 300 mm, 400 mm, 500 mm, 600 mm, 700 mm, 800 mm, 900 mm, and 1000 mm. Material: acetal. Working pressure: up to 1.4 bar. Maximum flow: 5182 l/hour. Operating temperature: up to +76°C.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong suction hose designed for the transfer of dry or liquid abrasive substances, granules, etc. Externally corrugated, internally smooth. The inner layer is made of transparent, abrasion-resistant polyurethane. The hose features a copper wire arranged in a spiral, which discharges electric charges when grounded or connected to a fitting. Widely used in plastic processing in applications requiring greater resistance to abrasion, puncturing, and cutting of the hose. Particularly recommended for plastic regrind with relatively sharp edges. Inner layer: transparent polyurethane. Reinforcement: hard PVC spiral. Hose material: transparent PVC. Working pressure: from 3 bar to 7 bar - depending on the hose diameter and temperature. Vacuum: from 0.69 bar to 0.74 bar - depending on the hose diameter and temperature. Operating temperature: from -5°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, highly flexible and bendable, chemically and thermally resistant two-layer hose designed for the discharge of the most chemically aggressive vapors, gases, dust, and fibers (non-abrasive), and for the blowing of hot air. Very good chemical resistance to aggressive chemicals due to the internal layer of PTFE. In the standard version, the internal layer of white natural PTFE meets food industry requirements (FDA). In the antistatic version EL, the black internal layer of PTFE is electrically conductive (R ≤106 Ω). With an outer layer made of silicone-coated glass fabric and an inner layer of PTFE, the hose is resistant to temperatures up to 250ºC. The hose features high compressibility - up to 1:6, a strong construction resistant to vibrations, stretching, and tearing, and impact resistance due to the external spiral. Resistant to UV radiation, ozone, aging, weather conditions, and is flame-retardant. Used in the chemical industry, metallurgy, foundry, ceramics, and glass industries. Also available with a stainless steel spiral (from a diameter of 80 mm). Hose installation on couplings with bridge clamps (left-handed). Chemical resistance verification - chemical resistance table for PTFE (preliminary selection), confirmation of resistance and application conditions - by Tubes International. Standard length: from 2 to 10 m. Hose material inner layer: white PTFE Teflon film - standard version SILTEF, black conductive PTFE Teflon film - antistatic version SITEF EL. Hose material outer layer: silicone-coated glass fabric, silver-gray. Reinforcement: external spiral made of galvanized steel wire and sheet. Operating temperature: from -50°C to +250°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible hose designed for hydraulic oil installations, gases, air, fuels, water-based fluids. Inner layer: polyester. Reinforcement: polyester braid. Outer layer: micro-perforated polyurethane. Working pressure: from 110 bar to 130 bar, depending on the hose diameter. Operating temperature: from -40°C to +93°C (for water and air up to +65°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible, and elastic hose designed for the extraction of hot fumes, gases, dust, exhaust gases, cooling air, and blowing. Used in all areas of industry for high-temperature applications, particularly in machine construction, vehicles, engine equipment, aerospace, and military applications. Resistant to temperature, flame-retardant, and very mechanically durable. Characterized by excellent compressibility, a very strong construction resistant to vibrations and stretching, and impact resistance due to the external spiral. Other diameters available upon special request in the range of 50 to 508 mm. Hose installation on couplings with bridge clamps (left-handed). Standard length: 3 m (also available in lengths of 6 and 10 m upon special request). Hose material: aramid fiber fabric internally impregnated with silver-gray silicone, 0.4 mm thick, externally green-gray. Reinforcement: type CLIP - external spiral made of galvanized steel wire and sheet metal, left-handed. Operating temperature: from -60°C to +260°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose intended for CO2 installation in industrial and marine fire protection systems. Resistant to very low temperatures. Inner layer: polyester. Reinforcement: steel braid. Outer layer: microperforated polyurethane. Operating temperature: from -60°C to +93°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong, flexible, resistant to kinks suction and discharge hose designed for the transfer of hot, dry air from the compressor to the tank installation. Ideal for situations where a small bend radius is required. Used in road tankers for transporting bulk materials: cement trucks, feed trucks, etc., as well as in other industrial installations. The outer layer is resistant to ozone and weather conditions. Standard length: 60 m or 120 m. Inner layer: white EPR rubber. Reinforcement: synthetic braid, steel spiral. Outer layer: blue (SAHARA®LL BD) or black (SAHARA® LL BN/PRO) EPDM rubber. Working pressure: 10 bar. Operating temperature: from -40°C to +200°C (temporarily up to +240°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSuction and pressure hose for pneumatic transport of dry abrasive substances. Special hose construction with exceptional abrasion resistance. The inner layer is smooth, made of black antistatic natural rubber with embedded alumina (Al2O3) ceramic balls, a material with high hardness. Built-in copper wire that, when grounded (connected to a grounded end), dissipates electric charges. The outer layer is corrugated, made of black antistatic (R<10^6Ω) SBR/NR rubber resistant to abrasion and aging. The hose is designed for transporting dry highly abrasive substances: e.g., dry cement, coal, coke, solid fuels from secondary raw materials, minerals, ceramic powders, steel shot, glass shards, fiberglass. Used in steelworks, coking plants, power plants, cement plants, mines, glassworks, abrasive material factories, and insulation material factories. An advantage is the long lifespan of the hose in these applications; a traditional abrasion-resistant rubber hose may work for only a few days, while the ALUSPHERE hose can last several months under the same conditions. Installation: The hose is designed for installation using the GHIBLI system - aluminum half-flanges PN10 applied externally to the hose. Inner layer: ceramic balls embedded in black NR rubber. Reinforcement: synthetic cord, steel spiral. Outer layer: black SBR/NR rubber. Working pressure: from 8 bar to 10 bar - depending on the hose diameter. Vacuum: 0.9 bar. Operating temperature: from -30°C to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible hose designed for hydraulic oil installations, gases, air, fuels, water-based fluids. Standards: SAE 100R7, EN855-R7, ISO 3949-R7. Inner layer: polyester. Reinforcement: one or two synthetic braids. Outer layer: micro-perforated polyurethane. Working pressure: from 70 bar to 210 bar, depending on hose diameter. Operating temperature: from -40°C to +100°C (for water and air up to +70°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight and flexible rubber hose for suction and transport of sand, gravel, cement, and other abrasive materials. Also used in cleaning systems and removal of abrasive material after abrasive blasting. The inner layer is smooth, made of wear-resistant rubber with a thickness of 3 mm. The outer layer is corrugated, resistant to abrasion and weather conditions. Reinforced with a steel spiral, it is resistant to kinking and vacuum. Designed for both suction and pressure work. It features a copper anti-static wire for discharging electric charges. Inner layer: black or brown natural rubber. Reinforcement: synthetic cord, steel spiral. Outer layer: black NR/SBR rubber. Working pressure: from 2 bar to 3 bar - depending on the hose diameter. Vacuum: up to 0.9 bar. Operating temperature: from -30°C to +70°C.
